rc.conf revision 74418
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 74418 2001-03-18 16:07:21Z ume $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22swapfile="NO" # Set to name of swapfile if aux swapfile desired. 23apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 24apmd_enable="NO" # Run apmd to handle APM event from userland. 25apmd_flags="" # Flags to apmd (if enabled). 26pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 27pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 28pccard_beep="2" # pccard beep type. 29pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 30pccardd_flags="" # Additional flags for pccardd. 31pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 32local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 33rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 34fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 35 36############################################################## 37### Network configuration sub-section ###################### 38############################################################## 39 40### Basic network and firewall/security options: ### 41hostname="" # Set this! 42nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 43dhcp_program="/sbin/dhclient" # Path to dhcp client program. 44dhcp_flags="" # Additional flags to pass to dhcp client. 45firewall_enable="NO" # Set to YES to enable firewall functionality 46firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 47firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 48firewall_quiet="NO" # Set to YES to suppress rule display 49firewall_logging="NO" # Set to YES to enable events logging 50firewall_flags="" # Flags passed to ipfw when type is a file 51ip_portrange_first="NO" # Set first dynamically allocated port 52ip_portrange_last="NO" # Set last dynamically allocated port 53ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 54ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 55natd_program="/sbin/natd" # path to natd, if you want a different one. 56natd_enable="NO" # Enable natd (if firewall_enable == YES). 57natd_interface="fxp0" # Public interface or IPaddress to use. 58natd_flags="" # Additional flags for natd. 59ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 60ipfilter_program="/sbin/ipf -Fa -f" 61 # program and how to specify the rules file, 62 # see /etc/rc.network (pass1) for details 63ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 64 # /usr/src/contrib/ipfilter/rules for examples 65ipfilter_flags="-E" # should be *empty* when ipf is _not_ a module 66 # (i.e. compiled into the kernel) to 67 # avoid a warning about "already initialized" 68ipnat_enable="NO" # Set to YES for ipnat; needs ipfilter, too! 69ipnat_program="/sbin/ipnat -CF -f" # program and how to specify rules file 70ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 71ipnat_flags="" # additional flags for ipnat 72ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter, too! 73ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 74ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 75tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 76log_in_vain="NO" # YES to log connects to ports w/o listeners. 77tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 78# For the following two options, you need to have TCP_DROP_SYNFIN and 79# TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. 80tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 81 # NOTE: this violates the TCP specification 82tcp_restrict_rst="NO" # Set to YES to restrict emission of RST 83icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 84icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 85network_interfaces="auto" # List of network interfaces (or "auto"). 86ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 87#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 88#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 89# 90# If you have any sppp(4) interfaces above, you might also want to set 91# the following parameters. Refer to spppcontrol(8) for their meaning. 92sppp_interfaces="" # List of sppp interfaces. 93#sppp_interfaces="isp0" # example: sppp over ISDN 94#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 95 96# User ppp configuration. 97ppp_enable="NO" # Start user-ppp (or NO). 98ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 99 # For details see man page for ppp(8). Default is auto. 100ppp_nat="YES" # Use PPP's internal network address translation or NO. 101ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 102ppp_user="root" # Which user to run ppp as 103 104### Network daemon (miscellaneous) & NFS options: ### 105syslogd_enable="YES" # Run syslog daemon (or NO). 106syslogd_flags="-s" # Flags to syslogd (if enabled). 107inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 108inetd_flags="-wW" # Optional flags to inetd 109# 110# named. It may be possible to run named in a sandbox, man security for 111# details. 112# 113named_enable="NO" # Run named, the DNS server (or NO). 114named_program="named" # path to named, if you want a different one. 115named_flags="" # Flags for named 116#named_flags="-u bind -g bind" # Flags for named 117 118kerberos_server_enable="NO" # Run a kerberos master server (or NO). 119kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 120 # a slave kerberos server 121kerberos_stash="" # Is the kerberos master key stashed? 122rwhod_enable="NO" # Run the rwho daemon (or NO). 123rwhod_flags="" # Flags for rwhod 124amd_enable="NO" # Run amd service with $amd_flags (or NO). 125amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 126amd_map_program="NO" # Can be set to "ypcat -k amd.master" 127nfs_client_enable="NO" # This host is an NFS client (or NO). 128nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 129nfs_access_cache="2" # Client cache timeout in seconds 130nfs_server_enable="NO" # This host is an NFS server (or NO). 131nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 132single_mountd_enable="NO" # Run mountd only (or NO). 133mountd_flags="-r" # Flags to mountd (if NFS server enabled). 134weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 135nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 136nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) 137rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 138rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 139portmap_enable="NO" # Run the portmapper service (YES/NO). 140portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 141portmap_flags="" # Flags to portmap (if enabled). 142rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 143keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 144keyserv_flags="" # Flags to keyserv (if enabled). 145rarpd_enable="NO" # Run rarpd (or NO). 146rarpd_flags="" # Flags to rarpd. 147xtend_enable="NO" # Run the X-10 power controller daemon. 148xtend_flags="" # Flags to xtend (if enabled). 149pppoed_enable="NO" # Run the PPP over Ethernet daemon. 150pppoed_provider="*" # Provider and ppp(8) config file entry. 151pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 152pppoed_interface="fxp0" # The interface that pppoed runs on. 153sshd_enable="NO" # Enable sshd 154sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 155sshd_flags="" # Additional flags for sshd. 156 157### Network Time Services options: ### 158timed_enable="NO" # Run the time daemon (or NO). 159timed_flags="" # Flags to timed (if enabled). 160ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 161ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 162ntpdate_flags="" # Flags to ntpdate (if enabled). 163xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 164xntpd_program="ntpd" # path to ntpd, if you want a different one. 165xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 166 167# Network Information Services (NIS) options: ### 168nis_client_enable="NO" # We're an NIS client (or NO). 169nis_client_flags="" # Flags to ypbind (if enabled). 170nis_ypset_enable="NO" # Run ypset at boot time (or NO). 171nis_ypset_flags="" # Flags to ypset (if enabled). 172nis_server_enable="NO" # We're an NIS server (or NO). 173nis_server_flags="" # Flags to ypserv (if enabled). 174nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 175nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 176nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 177nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 178 179### Network routing options: ### 180defaultrouter="NO" # Set to default gateway (or NO). 181static_routes="" # Set to static route list (or leave empty). 182gateway_enable="NO" # Set to YES if this host will be a gateway. 183router_enable="NO" # Set to YES to enable a routing daemon. 184router="routed" # Name of routing daemon to use if enabled. 185router_flags="-q" # Flags for routing daemon. 186mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 187mrouted_flags="" # Flags for multicast routing daemon. 188ipxgateway_enable="NO" # Set to YES to enable IPX routing. 189ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 190ipxrouted_flags="" # Flags for IPX routing daemon. 191arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 192forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 193accept_sourceroute="NO" # accept source routed packets to us 194 195### ATM interface options: ### 196atm_enable="NO" # Configure ATM interfaces (or NO). 197#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 198#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 199#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 200#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 201#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 202#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 203atm_pvcs="" # Set to PVC list (or leave empty). 204atm_arps="" # Set to permanent ARP list (or leave empty). 205 206### ISDN interface options: ### 207isdn_enable="NO" # Enable the ISDN subsystem (or NO). 208isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 209isdn_flags="-dn -d0x1f9" # Flags for isdnd 210isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 211isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 212 213### Miscellaneous network options: ### 214icmp_bmcastecho="NO" # respond to broadcast ping packets 215 216### IPv6 options: ### 217ipv6_enable="NO" # Set to YES to set up for IPv6. 218ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 219ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 220ipv6_static_routes="" # Set to static route list (or leave empty). 221#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 222 # route toward loopback interface. 223#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 224ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 225ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 226ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 227ipv6_router_flags="" # Flags to IPv6 routing daemon. 228#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 229 # addrs. 230#ipv6_network_interfaces="ed0 ep0" # Examples for router 231 # or static configuration for end node. 232 # Choose correct prefix value. 233#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 234#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 235#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 236#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 237ipv6_default_interface="" # Default output interface for scoped addrs. 238 # Now this works only for IPv6 link local 239 # multicast addrs. 240prefixcmd_enable="YES" # Use prefix command to assign router prefix. 241rtadvd_enable="YES" # Set to YES to enable an IPv6 router 242 # advertisement daemon. If set to YES, 243 # this router becomes a possible candidate 244 # IPv6 default router for local subnets. 245rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 246mroute6d_enable="NO" # Do IPv6 multicast routing. 247mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing 248 # daemon. 249mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 250gif_interfaces="NO" # List of GIF tunnels (or "NO"). 251#gif_interfaces="gif0 gif1" # Examples typically for a router. 252 # Choose correct tunnel addrs. 253#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 254#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 255stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 256 # tunneling interface. Specify this entry 257 # to enable 6to4 interface. 258stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 259 # to limit peer addr range. Effective value 260 # is 0-31. 261stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 262 # If you like, you can set "AUTO" for this. 263stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 264ipv6_ipv4mapping="YES" # Leave empty to disable IPv4 mapped IPv6 addr 265 # communication. (like ::ffff:a.b.c.d) 266ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 267 # functionality 268ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 269ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 270ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 271ipv6_firewall_logging="NO" # Set to YES to enable events logging 272ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 273 274############################################################## 275### System console options ################################# 276############################################################## 277 278keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 279keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 280keybell="NO" # bell to duration.pitch or normal or visual (or NO). 281keychange="NO" # function keys default values (or NO). 282cursor="NO" # cursor type {normal|blink|destructive} (or NO). 283scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 284font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 285font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 286font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 287blanktime="300" # blank time (in seconds) or "NO" to turn it off. 288saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 289moused_enable="NO" # Run the mouse daemon. 290moused_type="auto" # See man page for rc.conf(5) for available settings. 291moused_port="/dev/psm0" # Set to your mouse port. 292moused_flags="" # Any additional flags to moused. 293allscreens_flags="" # Set this vidcontrol mode for all virtual screens 294 295 296############################################################## 297### Miscellaneous administrative options ################### 298############################################################## 299 300cron_enable="YES" # Run the periodic job daemon. 301cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 302cron_flags="" # Which options to pass to the cron daemon. 303lpd_enable="NO" # Run the line printer daemon. 304lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 305lpd_flags="" # Flags to lpd (if enabled). 306usbd_enable="NO" # Run the usbd daemon. 307usbd_flags="" # Flags to usbd (if enabled). 308sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 309sendmail_flags="-bd -q30m" # Flags to sendmail (as a server) 310sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 311sendmail_outbound_flags="-q30m" # Flags to sendmail (outbound only) 312dumpdev="NO" # Device name to crashdump to (or NO). 313savecore_flags="" # Used if dumpdev is enabled above, and present. 314enable_quotas="NO" # turn on quotas on startup (or NO). 315check_quotas="YES" # Check quotas on startup (or NO). 316accounting_enable="NO" # Turn on process accounting (or NO). 317ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 318ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 319sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 320linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 321svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 322osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 323clear_tmp_enable="NO" # Clear /tmp at startup. 324ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 325ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 326 # shared library search paths 327ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 328 # a.out shared library search paths 329kern_securelevel_enable="NO" # kernel security level (see init(8)), 330kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 331update_motd="YES" # update version info in /etc/motd (or NO) 332start_vinum="" # set to YES to start vinum 333unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 334entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 335 # /var/db/entropy is preferred if / is not available. 336entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 337entropy_save_sz="2048" # Size of the entropy cache files. 338entropy_save_num="8" # Number of entropy cache files to save. 339harvest_interrupt="YES" # Entropy device harvests interrupt randomness 340harvest_ethernet="YES" # Entropy device harvests ethernet randomness 341harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 342 343############################################################## 344### Define source_rc_confs, the mechanism used by /etc/rc.* ## 345### scripts to source rc_conf_files overrides safely. ## 346############################################################## 347 348if [ -z "${source_rc_confs_defined}" ]; then 349 source_rc_confs_defined=yes 350 source_rc_confs ( ) { 351 local i sourced_files 352 for i in ${rc_conf_files}; do 353 case ${sourced_files} in 354 *:$i:*) 355 ;; 356 *) 357 sourced_files="${sourced_files}:$i:" 358 if [ -r $i ]; then 359 . $i 360 fi 361 ;; 362 esac 363 done 364 } 365fi 366 367