rc.conf revision 71121
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 71121 2001-01-16 20:05:05Z des $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22swapfile="NO" # Set to name of swapfile if aux swapfile desired. 23apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 24apmd_enable="NO" # Run apmd to handle APM event from userland. 25apmd_flags="" # Flags to apmd (if enabled). 26pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 27pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 28pccard_beep="2" # pccard beep type. 29pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 30pccardd_flags="" # Additional flags for pccardd. 31pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 32local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 33rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 34 35############################################################## 36### Network configuration sub-section ###################### 37############################################################## 38 39### Basic network and firewall/security options: ### 40hostname="" # Set this! 41nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 42dhcp_program="/sbin/dhclient" # Path to dhcp client program. 43dhcp_flags="" # Additional flags to pass to dhcp client. 44firewall_enable="NO" # Set to YES to enable firewall functionality 45firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 46firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 47firewall_quiet="NO" # Set to YES to suppress rule display 48firewall_logging="NO" # Set to YES to enable events logging 49firewall_flags="" # Flags passed to ipfw when type is a file 50ip_portrange_first="NO" # Set first dynamically allocated port 51ip_portrange_last="NO" # Set last dynamically allocated port 52ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 53ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 54natd_program="/sbin/natd" # path to natd, if you want a different one. 55natd_enable="NO" # Enable natd (if firewall_enable == YES). 56natd_interface="fxp0" # Public interface or IPaddress to use. 57natd_flags="" # Additional flags for natd. 58ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 59ipfilter_program="/sbin/ipf -Fa -f" 60 # program and how to specify the rules file, 61 # see /etc/rc.network (pass1) for details 62ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 63 # /usr/src/contrib/ipfilter/rules for examples 64ipfilter_flags="-E" # should be *empty* when ipf is _not_ a module 65 # (i.e. compiled into the kernel) to 66 # avoid a warning about "already initialized" 67ipnat_enable="NO" # Set to YES for ipnat; needs ipfilter, too! 68ipnat_program="/sbin/ipnat -CF -f" # program and how to specify rules file 69ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 70ipnat_flags="" # additional flags for ipnat 71ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter, too! 72ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 73ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 74tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 75log_in_vain="NO" # YES to log connects to ports w/o listeners. 76tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 77# For the following two options, you need to have TCP_DROP_SYNFIN and 78# TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. 79tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 80 # NOTE: this violates the TCP specification 81tcp_restrict_rst="NO" # Set to YES to restrict emission of RST 82icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 83icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 84network_interfaces="auto" # List of network interfaces (or "auto"). 85ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 86#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 87#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 88# 89# If you have any sppp(4) interfaces above, you might also want to set 90# the following parameters. Refer to spppcontrol(8) for their meaning. 91sppp_interfaces="" # List of sppp interfaces. 92#sppp_interfaces="isp0" # example: sppp over ISDN 93#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 94 95# User ppp configuration. 96ppp_enable="NO" # Start user-ppp (or NO). 97ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 98 # For details see man page for ppp(8). Default is auto. 99ppp_nat="YES" # Use PPP's internal network address translation or NO. 100ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 101ppp_user="root" # Which user to run ppp as 102 103### Network daemon (miscellaneous) & NFS options: ### 104syslogd_enable="YES" # Run syslog daemon (or NO). 105syslogd_flags="-s" # Flags to syslogd (if enabled). 106inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 107inetd_flags="-wW" # Optional flags to inetd 108# 109# named. It may be possible to run named in a sandbox, man security for 110# details. 111# 112named_enable="NO" # Run named, the DNS server (or NO). 113named_program="named" # path to named, if you want a different one. 114named_flags="" # Flags for named 115#named_flags="-u bind -g bind" # Flags for named 116 117kerberos_server_enable="NO" # Run a kerberos master server (or NO). 118kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 119 # a slave kerberos server 120kerberos_stash="" # Is the kerberos master key stashed? 121rwhod_enable="NO" # Run the rwho daemon (or NO). 122rwhod_flags="" # Flags for rwhod 123amd_enable="NO" # Run amd service with $amd_flags (or NO). 124amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 125amd_map_program="NO" # Can be set to "ypcat -k amd.master" 126nfs_client_enable="NO" # This host is an NFS client (or NO). 127nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 128nfs_access_cache="2" # Client cache timeout in seconds 129nfs_server_enable="NO" # This host is an NFS server (or NO). 130nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 131single_mountd_enable="NO" # Run mountd only (or NO). 132mountd_flags="-r" # Flags to mountd (if NFS server enabled). 133weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 134nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 135nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) 136rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 137rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 138portmap_enable="NO" # Run the portmapper service (YES/NO). 139portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 140portmap_flags="" # Flags to portmap (if enabled). 141rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 142keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 143keyserv_flags="" # Flags to keyserv (if enabled). 144rarpd_enable="NO" # Run rarpd (or NO). 145rarpd_flags="" # Flags to rarpd. 146xtend_enable="NO" # Run the X-10 power controller daemon. 147xtend_flags="" # Flags to xtend (if enabled). 148pppoed_enable="NO" # Run the PPP over Ethernet daemon. 149pppoed_provider="*" # Provider and ppp(8) config file entry. 150pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 151pppoed_interface="fxp0" # The interface that pppoed runs on. 152sshd_enable="NO" # Enable sshd 153sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 154sshd_flags="" # Additional flags for sshd. 155 156### Network Time Services options: ### 157timed_enable="NO" # Run the time daemon (or NO). 158timed_flags="" # Flags to timed (if enabled). 159ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 160ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 161ntpdate_flags="" # Flags to ntpdate (if enabled). 162xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 163xntpd_program="ntpd" # path to ntpd, if you want a different one. 164xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 165 166# Network Information Services (NIS) options: ### 167nis_client_enable="NO" # We're an NIS client (or NO). 168nis_client_flags="" # Flags to ypbind (if enabled). 169nis_ypset_enable="NO" # Run ypset at boot time (or NO). 170nis_ypset_flags="" # Flags to ypset (if enabled). 171nis_server_enable="NO" # We're an NIS server (or NO). 172nis_server_flags="" # Flags to ypserv (if enabled). 173nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 174nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 175nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 176nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 177 178### Network routing options: ### 179defaultrouter="NO" # Set to default gateway (or NO). 180static_routes="" # Set to static route list (or leave empty). 181gateway_enable="NO" # Set to YES if this host will be a gateway. 182router_enable="NO" # Set to YES to enable a routing daemon. 183router="routed" # Name of routing daemon to use if enabled. 184router_flags="-q" # Flags for routing daemon. 185mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 186mrouted_flags="" # Flags for multicast routing daemon. 187ipxgateway_enable="NO" # Set to YES to enable IPX routing. 188ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 189ipxrouted_flags="" # Flags for IPX routing daemon. 190arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 191forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 192accept_sourceroute="NO" # accept source routed packets to us 193 194### ATM interface options: ### 195atm_enable="NO" # Configure ATM interfaces (or NO). 196#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 197#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 198#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 199#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 200#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 201#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 202atm_pvcs="" # Set to PVC list (or leave empty). 203atm_arps="" # Set to permanent ARP list (or leave empty). 204 205### ISDN interface options: ### 206isdn_enable="NO" # Enable the ISDN subsystem (or NO). 207isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 208isdn_flags="-dn -d0x1f9" # Flags for isdnd 209isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 210isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 211 212### Miscellaneous network options: ### 213icmp_bmcastecho="NO" # respond to broadcast ping packets 214 215### IPv6 options: ### 216ipv6_enable="NO" # Set to YES to set up for IPv6. 217ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 218ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 219ipv6_static_routes="" # Set to static route list (or leave empty). 220#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 221 # route toward loopback interface. 222#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 223ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 224ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 225ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 226ipv6_router_flags="" # Flags to IPv6 routing daemon. 227#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 228 # addrs. 229#ipv6_network_interfaces="ed0 ep0" # Examples for router 230 # or static configuration for end node. 231 # Choose correct prefix value. 232#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 233#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 234#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample alias entry 235ipv6_default_interface="" # Default output interface for scoped addrs. 236 # Now this works only for IPv6 link local 237 # multicast addrs. 238prefixcmd_enable="YES" # Use prefix command to assign router prefix. 239rtadvd_enable="YES" # Set to YES to enable an IPv6 router 240 # advertisement daemon. If set to YES, 241 # this router becomes a possible candidate 242 # IPv6 default router for local subnets. 243mroute6d_enable="NO" # Do IPv6 multicast routing. 244mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing 245 # daemon. 246mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 247gif_interfaces="NO" # List of GIF tunnels (or "NO"). 248#gif_interfaces="gif0 gif1" # Examples typically for a router. 249 # Choose correct tunnel addrs. 250#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 251#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 252stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 253 # tunneling interface. Specify this entry 254 # to enable 6to4 interface. 255stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 256 # to limit peer addr range. Effective value 257 # is 0-31. 258stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 259 # If you like, you can set "AUTO" for this. 260stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 261ipv6_ipv4mapping="YES" # Leave empty to disable IPv4 mapped IPv6 addr 262 # communication. (like ::ffff:a.b.c.d) 263ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 264 # functionality 265ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 266ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 267ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 268ipv6_firewall_logging="NO" # Set to YES to enable events logging 269ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 270 271############################################################## 272### System console options ################################# 273############################################################## 274 275keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 276keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 277keybell="NO" # bell to duration.pitch or normal or visual (or NO). 278keychange="NO" # function keys default values (or NO). 279cursor="NO" # cursor type {normal|blink|destructive} (or NO). 280scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 281font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 282font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 283font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 284blanktime="300" # blank time (in seconds) or "NO" to turn it off. 285saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 286moused_enable="NO" # Run the mouse daemon. 287moused_type="auto" # See man page for rc.conf(5) for available settings. 288moused_port="/dev/psm0" # Set to your mouse port. 289moused_flags="" # Any additional flags to moused. 290allscreens_flags="" # Set this vidcontrol mode for all virtual screens 291 292 293############################################################## 294### Miscellaneous administrative options ################### 295############################################################## 296 297cron_enable="YES" # Run the periodic job daemon. 298lpd_enable="NO" # Run the line printer daemon. 299lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 300lpd_flags="" # Flags to lpd (if enabled). 301usbd_enable="NO" # Run the usbd daemon. 302usbd_flags="" # Flags to usbd (if enabled). 303sendmail_enable="NO" # Run the sendmail daemon (YES/NO). 304sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 305dumpdev="NO" # Device name to crashdump to (or NO). 306enable_quotas="NO" # turn on quotas on startup (or NO). 307check_quotas="YES" # Check quotas on startup (or NO). 308accounting_enable="NO" # Turn on process accounting (or NO). 309ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 310ibcs2_loaders="NO" # List of additional Ibcs2 loaders (or NO). 311sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 312linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 313svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 314osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 315clear_tmp_enable="NO" # Clear /tmp at startup. 316ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 317ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 318 # shared library search paths 319ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 320 # a.out shared library search paths 321kern_securelevel_enable="NO" # kernel security level (see init(8)), 322kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 323update_motd="YES" # update version info in /etc/motd (or NO) 324start_vinum="" # set to YES to start vinum 325unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 326entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 327 # /var/db/entropy is preferred if / is not available. 328entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 329entropy_save_sz="2048" # Size of the entropy cache files. 330entropy_save_num="8" # Number of entropy cache files to save. 331 332############################################################## 333### Define source_rc_confs, the mechanism used by /etc/rc.* ## 334### scripts to source rc_conf_files overrides safely. ## 335############################################################## 336 337if [ -z "${source_rc_confs_defined}" ]; then 338 source_rc_confs_defined=yes 339 source_rc_confs ( ) { 340 local i sourced_files 341 for i in ${rc_conf_files}; do 342 case ${sourced_files} in 343 *:$i:*) 344 ;; 345 *) 346 sourced_files="${sourced_files}:$i:" 347 if [ -r $i ]; then 348 . $i 349 fi 350 ;; 351 esac 352 done 353 } 354fi 355 356