rc.conf revision 64501
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 64501 2000-08-10 19:52:06Z billf $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22swapfile="NO" # Set to name of swapfile if aux swapfile desired. 23apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 24apmd_enable="NO" # Run apmd to handle APM event from userland. 25apmd_flags="" # Flags to apmd (if enabled). 26pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 27pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 28pccard_beep="1" # pccard beep type. 29pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 30pccardd_flags="" # Additional flags for pccardd. 31pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 32local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 33rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 34 35############################################################## 36### Network configuration sub-section ###################### 37############################################################## 38 39### Basic network options: ### 40hostname="" # Set this! 41nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 42dhcp_program="/sbin/dhclient" # Path to dhcp client program. 43dhcp_flags="" # Additional flags to pass to dhcp client. 44firewall_enable="NO" # Set to YES to enable firewall functionality 45firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 46firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 47firewall_quiet="NO" # Set to YES to suppress rule display 48firewall_logging="NO" # Set to YES to enable events logging 49firewall_flags="" # Flags passed to ipfw when type is a file 50ip_portrange_first="NO" # Set first dynamically allocated port 51ip_portrange_last="NO" # Set last dynamically allocated port 52ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 53ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 54natd_program="/sbin/natd" # path to natd, if you want a different one. 55natd_enable="NO" # Enable natd (if firewall_enable == YES). 56natd_interface="fxp0" # Public interface or IPaddress to use. 57natd_flags="" # Additional flags for natd. 58tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 59log_in_vain="NO" # YES to log connects to ports w/o listeners. 60tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 61# For the following two options, you need to have TCP_DROP_SYNFIN and 62# TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. 63tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 64 # NOTE: this violates the TCP specification 65tcp_restrict_rst="NO" # Set to YES to restrict emission of RST 66icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 67icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 68network_interfaces="auto" # List of network interfaces (or "auto"). 69ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 70#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 71#ifconfig_ed0_alias0="inet6 fec0:0000:0000:0005::1 prefixlen 64" # Sample alias entry for IPv6. 72# 73# If you have any sppp(4) interfaces above, you might also want to set 74# the following parameters. Refer to spppcontrol(8) for their meaning. 75sppp_interfaces="" # List of sppp interfaces. 76#sppp_interfaces="isp0" # example: sppp over ISDN 77#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 78 79# User ppp configuration. 80ppp_enable="NO" # Start user-ppp (or NO). 81ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 82 # For details see man page for ppp(8). Default is auto. 83ppp_nat="YES" # Use PPP's internal network address translation or NO. 84ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 85ppp_user="root" # Which user to run ppp as 86 87### Network daemon (miscellaneous) & NFS options: ### 88syslogd_enable="YES" # Run syslog daemon (or NO). 89syslogd_flags="-s" # Flags to syslogd (if enabled). 90inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 91inetd_flags="-wW" # Optional flags to inetd 92# 93# named. It may be possible to run named in a sandbox, man security for 94# details. 95# 96named_enable="NO" # Run named, the DNS server (or NO). 97named_program="named" # path to named, if you want a different one. 98named_flags="" # Flags for named 99#named_flags="-u bind -g bind" # Flags for named 100 101kerberos_server_enable="NO" # Run a kerberos master server (or NO). 102kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 103 # a slave kerberos server 104kerberos_stash="" # Is the kerberos master key stashed? 105rwhod_enable="NO" # Run the rwho daemon (or NO). 106rwhod_flags="" # Flags for rwhod 107amd_enable="NO" # Run amd service with $amd_flags (or NO). 108amd_flags="-a /.amd_mnt -c 1800 -l syslog /host /etc/amd.map /net /etc/amd.map" 109amd_map_program="NO" # Can be set to "ypcat -k amd.master" 110nfs_client_enable="NO" # This host is an NFS client (or NO). 111nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 112nfs_access_cache="2" # Client cache timeout in seconds 113nfs_server_enable="NO" # This host is an NFS server (or NO). 114nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 115single_mountd_enable="NO" # Run mountd only (or NO). 116mountd_flags="-r" # Flags to mountd (if NFS server enabled). 117weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 118nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 119nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) 120rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 121rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 122portmap_enable="NO" # Run the portmapper service (YES/NO). 123portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 124portmap_flags="" # Flags to portmap (if enabled). 125rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 126keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 127keyserv_flags="" # Flags to keyserv (if enabled). 128rarpd_enable="NO" # Run rarpd (or NO). 129rarpd_flags="" # Flags to rarpd. 130xtend_enable="NO" # Run the X-10 power controller daemon. 131xtend_flags="" # Flags to xtend (if enabled). 132pppoed_enable="NO" # Run the PPP over Ethernet daemon. 133pppoed_provider="*" # Provider and ppp(8) config file entry. 134pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 135pppoed_interface="fxp0" # The interface that pppoed runs on. 136sshd_enable="NO" # Enable sshd 137sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 138sshd_flags="" # Additional flags for sshd. 139 140### Network Time Services options: ### 141timed_enable="NO" # Run the time daemon (or NO). 142timed_flags="" # Flags to timed (if enabled). 143ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 144ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 145ntpdate_flags="" # Flags to ntpdate (if enabled). 146xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 147xntpd_program="ntpd" # path to ntpd, if you want a different one. 148xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 149 150# Network Information Services (NIS) options: ### 151nis_client_enable="NO" # We're an NIS client (or NO). 152nis_client_flags="" # Flags to ypbind (if enabled). 153nis_ypset_enable="NO" # Run ypset at boot time (or NO). 154nis_ypset_flags="" # Flags to ypset (if enabled). 155nis_server_enable="NO" # We're an NIS server (or NO). 156nis_server_flags="" # Flags to ypserv (if enabled). 157nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 158nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 159nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 160nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 161 162### Network routing options: ### 163defaultrouter="NO" # Set to default gateway (or NO). 164static_routes="" # Set to static route list (or leave empty). 165gateway_enable="NO" # Set to YES if this host will be a gateway. 166router_enable="NO" # Set to YES to enable a routing daemon. 167router="routed" # Name of routing daemon to use if enabled. 168router_flags="-q" # Flags for routing daemon. 169mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 170mrouted_flags="" # Flags for multicast routing daemon. 171ipxgateway_enable="NO" # Set to YES to enable IPX routing. 172ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 173ipxrouted_flags="" # Flags for IPX routing daemon. 174arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 175forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 176accept_sourceroute="NO" # accept source routed packets to us 177 178### ATM interface options: ### 179atm_enable="NO" # Configure ATM interfaces (or NO). 180#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 181#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 182#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 183#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 184#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 185#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 186atm_pvcs="" # Set to PVC list (or leave empty). 187atm_arps="" # Set to permanent ARP list (or leave empty). 188 189### ISDN interface options: ### 190isdn_enable="NO" # Enable the ISDN subsystem (or NO). 191isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 192isdn_flags="-dn -d0x1f9" # Flags for isdnd 193isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 194isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 195 196### Miscellaneous network options: ### 197icmp_bmcastecho="NO" # respond to broadcast ping packets 198 199### IPv6 options: ### 200ipv6_enable="NO" # Set to YES to set up for IPv6. 201ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 202ipv6_static_routes="" # Set to static route list (or leave empty). 203#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 204 # route toward loopback interface. 205#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 206ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 207ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 208ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 209ipv6_router_flags="" # Flags to IPv6 routing daemon. 210#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 211 # addrs. 212#ipv6_network_interfaces="ed0 ep0" # Examples for router. 213 # Choose correct prefix value. 214#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 215#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 216ipv6_default_interface="" # Default output interface for scoped addrs. 217 # Now this works only for IPv6 link local 218 # multicast addrs. 219prefixcmd_enable="YES" # Use prefix command to assign router prefix. 220rtadvd_enable="YES" # Set to YES to enable an IPv6 router 221 # advertisement daemon. If set to YES, 222 # this router becomes a possible candidate 223 # IPv6 default router for local subnets. 224mroute6d_enable="NO" # Do IPv6 multicast routing. 225mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing 226 # daemon. 227mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 228gif_interfaces="NO" # List of GIF tunnels (or "NO"). 229#gif_interfaces="gif0 gif1" # Examples typically for a router. 230 # Choose correct tunnel addrs. 231#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 232#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 233stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 234 # tunneling interface. Specify this entry 235 # to enable 6to4 interface. 236stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 237 # to limit peer addr range. Effective value 238 # is 0-31. 239stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 240 # If you like, you can set "AUTO" for this. 241stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 242ipv6_ipv4mapping="YES"; # Leave empty to disable IPv4 mapped IPv6 addr 243 # communication. (like ::ffff:a.b.c.d) 244 245############################################################## 246### System console options ################################# 247############################################################## 248 249keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 250keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 251keybell="NO" # bell to duration.pitch or normal or visual (or NO). 252keychange="NO" # function keys default values (or NO). 253cursor="NO" # cursor type {normal|blink|destructive} (or NO). 254scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 255font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 256font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 257font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 258blanktime="300" # blank time (in seconds) or "NO" to turn it off. 259saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 260moused_enable="NO" # Run the mouse daemon. 261moused_type="auto" # See man page for rc.conf(5) for available settings. 262moused_port="/dev/psm0" # Set to your mouse port. 263moused_flags="" # Any additional flags to moused. 264allscreens_flags="" # Set this vidcontrol mode for all virtual screens 265 266 267############################################################## 268### Miscellaneous administrative options ################### 269############################################################## 270 271cron_enable="YES" # Run the periodic job daemon. 272lpd_enable="NO" # Run the line printer daemon. 273lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 274lpd_flags="" # Flags to lpd (if enabled). 275usbd_enable="NO" # Run the usbd daemon. 276usbd_flags="" # Flags to usbd (if enabled). 277sendmail_enable="NO" # Run the sendmail daemon (YES/NO). 278sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 279dumpdev="NO" # Device name to crashdump to (or NO). 280enable_quotas="NO" # turn on quotas on startup (or NO). 281check_quotas="YES" # Check quotas on startup (or NO). 282accounting_enable="NO" # Turn on process accounting (or NO). 283ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 284linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 285svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 286osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 287clear_tmp_enable="NO" # Clear /tmp at startup. 288ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 289 # shared library search paths 290ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 291 # a.out shared library search paths 292kern_securelevel_enable="NO" # kernel security level (see init(8)), 293kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 294update_motd="YES" # update version info in /etc/motd (or NO) 295start_vinum="" # set to YES to start vinum 296entropy_file="/var/db/entropy" 297 # Set to NO to disable caching entropy through reboots 298 299############################################################## 300### Define source_rc_confs, the mechanism used by /etc/rc.* ## 301### scripts to source rc_conf_files overrides safely. ## 302############################################################## 303 304if [ -z "${source_rc_confs_defined}" ]; then 305 source_rc_confs_defined=yes 306 source_rc_confs ( ) { 307 local i sourced_files 308 for i in ${rc_conf_files}; do 309 case ${sourced_files} in 310 *:$i:*) 311 ;; 312 *) 313 sourced_files="${sourced_files}:$i:" 314 if [ -r $i ]; then 315 . $i 316 fi 317 ;; 318 esac 319 done 320 } 321fi 322 323