rc.conf revision 60977
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 60977 2000-05-27 18:03:15Z wilko $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22swapfile="NO" # Set to name of swapfile if aux swapfile desired. 23apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 24apmd_enable="NO" # Run apmd to handle APM event from userland. 25apmd_flags="" # Flags to apmd (if enabled). 26pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 27pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 28pccard_beep="1" # pccard beep type. 29pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 30pccardd_flags="" # Additional flags for pccardd. 31pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 32local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 33local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 34rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 35 36############################################################## 37### Network configuration sub-section ###################### 38############################################################## 39 40### Basic network options: ### 41hostname="" # Set this! 42nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 43dhcp_program="/sbin/dhclient" # Path to dhcp client program. 44dhcp_flags="" # Additional flags to pass to dhcp client. 45firewall_enable="NO" # Set to YES to enable firewall functionality 46firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 47firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 48firewall_quiet="NO" # Set to YES to suppress rule display 49firewall_logging="NO" # Set to YES to enable events logging 50firewall_flags="" # Flags passed to ipfw when type is a file 51natd_program="/sbin/natd" # path to natd, if you want a different one. 52natd_enable="NO" # Enable natd (if firewall_enable == YES). 53natd_interface="fxp0" # Public interface or IPaddress to use. 54natd_flags="" # Additional flags for natd. 55tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 56log_in_vain="NO" # YES to log connects to ports w/o listeners. 57tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 58# For the following two options, you need to have TCP_DROP_SYNFIN and 59# TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. 60tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 61 # NOTE: this violates the TCP specification 62tcp_restrict_rst="NO" # Set to YES to restrict emission of RST 63icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 64icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 65network_interfaces="auto" # List of network interfaces (or "auto"). 66ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 67#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 68#ifconfig_ed0_alias0="inet6 fec0:0000:0000:0005::1 prefixlen 64" # Sample alias entry for IPv6. 69# 70# If you have any sppp(4) interfaces above, you might also want to set 71# the following parameters. Refer to spppcontrol(8) for their meaning. 72sppp_interfaces="" # List of sppp interfaces. 73#sppp_interfaces="isp0" # example: sppp over ISDN 74#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 75 76# User ppp configuration. 77ppp_enable="NO" # Start user-ppp (or NO). 78ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 79 # For details see man page for ppp(8). Default is auto. 80ppp_nat="YES" # Use PPP's internal network address translation or NO. 81ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 82 83### Network daemon (miscellaneous) & NFS options: ### 84syslogd_enable="YES" # Run syslog daemon (or NO). 85syslogd_flags="-s" # Flags to syslogd (if enabled). 86inetd_enable="YES" # Run the network daemon dispatcher (or NO). 87inetd_flags="-wW" # Optional flags to inetd 88# 89# named. It may be possible to run named in a sandbox, man security for 90# details. 91# 92named_enable="NO" # Run named, the DNS server (or NO). 93named_program="named" # path to named, if you want a different one. 94named_flags="" # Flags for named 95#named_flags="-u bind -g bind" # Flags for named 96 97kerberos_server_enable="NO" # Run a kerberos master server (or NO). 98kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 99 # a slave kerberos server 100kerberos_stash="" # Is the kerberos master key stashed? 101rwhod_enable="NO" # Run the rwho daemon (or NO). 102rwhod_flags="" # Flags for rwhod 103amd_enable="NO" # Run amd service with $amd_flags (or NO). 104amd_flags="-a /.amd_mnt -c 1800 -l syslog /host /etc/amd.map /net /etc/amd.map" 105amd_map_program="NO" # Can be set to "ypcat -k amd.master" 106nfs_client_enable="NO" # This host is an NFS client (or NO). 107nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 108nfs_access_cache="2" # Client cache timeout in seconds 109nfs_server_enable="NO" # This host is an NFS server (or NO). 110nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 111single_mountd_enable="NO" # Run mountd only (or NO). 112mountd_flags="-r" # Flags to mountd (if NFS server enabled). 113nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 114nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) 115rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 116rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 117portmap_enable="YES" # Run the portmapper service (or NO). 118portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 119portmap_flags="" # Flags to portmap (if enabled). 120rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 121keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 122keyserv_flags="" # Flags to keyserv (if enabled). 123rarpd_enable="NO" # Run rarpd (or NO). 124rarpd_flags="" # Flags to rarpd. 125xtend_enable="NO" # Run the X-10 power controller daemon. 126xtend_flags="" # Flags to xtend (if enabled). 127pppoed_enable="NO" # Run the PPP over Ethernet daemon. 128pppoed_provider="*" # Provider and ppp(8) config file entry. 129pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 130pppoed_interface="fxp0" # The interface that pppoed runs on. 131sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 132sshd_enable="NO" # Enable sshd 133sshd_flags="" # Additional flags for sshd. 134 135### Network Time Services options: ### 136timed_enable="NO" # Run the time daemon (or NO). 137timed_flags="" # Flags to timed (if enabled). 138ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 139ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 140ntpdate_flags="" # Flags to ntpdate (if enabled). 141xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 142xntpd_program="ntpd" # path to ntpd, if you want a different one. 143xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 144 145# Network Information Services (NIS) options: ### 146nis_client_enable="NO" # We're an NIS client (or NO). 147nis_client_flags="" # Flags to ypbind (if enabled). 148nis_ypset_enable="NO" # Run ypset at boot time (or NO). 149nis_ypset_flags="" # Flags to ypset (if enabled). 150nis_server_enable="NO" # We're an NIS server (or NO). 151nis_server_flags="" # Flags to ypserv (if enabled). 152nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 153nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 154nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 155nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 156 157### Network routing options: ### 158defaultrouter="NO" # Set to default gateway (or NO). 159static_routes="" # Set to static route list (or leave empty). 160gateway_enable="NO" # Set to YES if this host will be a gateway. 161ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 162ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 163router_enable="NO" # Set to YES to enable a routing daemon. 164router="routed" # Name of routing daemon to use if enabled. 165router_flags="-q" # Flags for routing daemon. 166mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 167mrouted_flags="" # Flags for multicast routing daemon. 168ipxgateway_enable="NO" # Set to YES to enable IPX routing. 169ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 170ipxrouted_flags="" # Flags for IPX routing daemon. 171arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 172forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 173accept_sourceroute="NO" # accept source routed packets to us 174 175### ATM interface options: ### 176atm_enable="NO" # Configure ATM interfaces (or NO). 177#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 178#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 179#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 180#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 181#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 182#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 183atm_pvcs="" # Set to PVC list (or leave empty). 184atm_arps="" # Set to permanent ARP list (or leave empty). 185 186### ISDN interface options: ### 187isdn_enable="NO" # Enable the ISDN subsystem (or NO). 188isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 189isdn_flags="-dn -d0x1f9" # Flags for isdnd 190isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 191isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 192 193### Miscellaneous network options: ### 194icmp_bmcastecho="NO" # respond to broadcast ping packets 195 196### IPv6 options: ### 197ipv6_enable="NO" # Set to YES to set up for IPv6. 198ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 199ipv6_static_routes="" # Set to static route list (or leave empty). 200#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 201 # route toward loopback interface. 202#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 203ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 204ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 205ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 206ipv6_router_flags="" # Flags to IPv6 routing daemon. 207#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 208 # addrs. 209#ipv6_network_interfaces="ed0 ep0" # Examples for router. 210 # Choose correct prefix value. 211#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 212#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 213ipv6_default_interface="" # Default output interface for scoped addrs. 214 # Now this works only for IPv6 link local 215 # multicast addrs. 216prefixcmd_enable="YES" # Use prefix command to assign router prefix. 217rtadvd_enable="YES" # Set to YES to enable an IPv6 router 218 # advertisement daemon. If set to YES, 219 # this router becomes a possible candidate 220 # IPv6 default router for local subnets. 221mroute6d_enable="NO" # Do IPv6 multicast routing. 222mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing 223 # daemon. 224mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 225gif_interfaces="NO" # List of GIF tunnels (or "NO"). 226#gif_interfaces="gif0 gif1" # Examples typically for a router. 227 # Choose correct tunnel addrs. 228#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 229#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 230stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 231 # tunneling interface. Specify this entry 232 # to enable 6to4 interface. 233stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 234 # to limit peer addr range. Effective value 235 # is 0-31. 236stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 237 # If you like, you can set "AUTO" for this. 238stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 239ipv6_ipv4mapping="YES"; # Leave empty to disable IPv4 mapped IPv6 addr 240 # communication. (like ::ffff:a.b.c.d) 241 242############################################################## 243### System console options ################################# 244############################################################## 245 246keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 247keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 248keybell="NO" # bell to duration.pitch or normal or visual (or NO). 249keychange="NO" # function keys default values (or NO). 250cursor="NO" # cursor type {normal|blink|destructive} (or NO). 251scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 252font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 253font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 254font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 255blanktime="300" # blank time (in seconds) or "NO" to turn it off. 256saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 257moused_enable="NO" # Run the mouse daemon. 258moused_type="auto" # See man page for rc.conf(5) for available settings. 259moused_port="/dev/psm0" # Set to your mouse port. 260moused_flags="" # Any additional flags to moused. 261allscreens_flags="" # Set this vidcontrol mode for all virtual screens 262 263 264############################################################## 265### Miscellaneous administrative options ################### 266############################################################## 267 268cron_enable="YES" # Run the periodic job daemon. 269lpd_enable="NO" # Run the line printer daemon. 270lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 271lpd_flags="" # Flags to lpd (if enabled). 272usbd_enable="NO" # Run the usbd daemon. 273usbd_flags="" # Flags to usbd (if enabled). 274sendmail_enable="YES" # Run the sendmail daemon (or NO). 275sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 276dumpdev="NO" # Device name to crashdump to (or NO). 277enable_quotas="NO" # turn on quotas on startup (or NO). 278check_quotas="YES" # Check quotas on startup (or NO). 279accounting_enable="NO" # Turn on process accounting (or NO). 280ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 281linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 282svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 283osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 284rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 285clear_tmp_enable="NO" # Clear /tmp at startup. 286ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 287 # shared library search paths 288ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 289 # a.out shared library search paths 290kern_securelevel_enable="NO" # kernel security level (see init(8)), 291kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 292update_motd="YES" # update version info in /etc/motd (or NO) 293start_vinum="" # set to YES to start vinum 294 295############################################################## 296### Define source_rc_confs, the mechanism used by /etc/rc.* ## 297### scripts to source rc_conf_files overrides safely. ## 298############################################################## 299 300if [ -z "${source_rc_confs_defined}" ]; then 301 source_rc_confs_defined=yes 302 source_rc_confs ( ) { 303 local i sourced_files 304 for i in ${rc_conf_files}; do 305 case ${sourced_files} in 306 *:$i:*) 307 ;; 308 *) 309 sourced_files="${sourced_files}:$i:" 310 if [ -r $i ]; then 311 . $i 312 fi 313 ;; 314 esac 315 done 316 } 317fi 318 319