rc.conf revision 58710
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# A common mistake is to copy the contents of this file into one of the 11# ${rc_conf_files} files (e.g. /etc/rc.conf). That does not work, because 12# this file ends up recursing on itself. The ${rc_conf_files} files should 13# only contain values which override values set in this file. 14# 15# All arguments must be in double or single quotes. 16# 17# $FreeBSD: head/etc/defaults/rc.conf 58710 2000-03-27 21:38:35Z dillon $ 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23swapfile="NO" # Set to name of swapfile if aux swapfile desired. 24apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 25apmd_enable="NO" # Run apmd to handle APM event from userland. 26apmd_flags="" # Flags to apmd (if enabled). 27pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 28pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 29pccard_beep="1" # pccard beep type. 30pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 31pccardd_flags="" # Additional flags for pccardd. 32pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file 33local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 34local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 35rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 36 37############################################################## 38### Network configuration sub-section ###################### 39############################################################## 40 41### Basic network options: ### 42hostname="" # Set this! 43nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 44dhcp_program="/sbin/dhclient" # Path to dhcp client program. 45dhcp_flags="" # Additional flags to pass to dhcp client. 46firewall_enable="NO" # Set to YES to enable firewall functionality 47firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 48firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 49firewall_quiet="NO" # Set to YES to suppress rule display 50firewall_flags="" # Flags passed to ipfw when type is a file 51natd_program="/sbin/natd" # path to natd, if you want a different one. 52natd_enable="NO" # Enable natd (if firewall_enable == YES). 53natd_interface="fxp0" # Public interface or IPaddress to use. 54natd_flags="" # Additional flags for natd. 55tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 56log_in_vain="NO" # YES to log connects to ports w/o listeners. 57tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 58tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 59 # NOTE: this breaks rfc1644 extensions (T/TCP) 60tcp_restrict_rst="NO" # Set to YES to restrict emission of RST 61icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 62icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 63network_interfaces="auto" # List of network interfaces (or "auto"). 64ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 65#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 66#ifconfig_ed0_alias0="inet6 fec0:0000:0000:0005::1 prefixlen 64" # Sample alias entry for IPv6. 67# 68# If you have any sppp(4) interfaces above, you might also want to set 69# the following parameters. Refer to spppcontrol(8) for their meaning. 70sppp_interfaces="" # List of sppp interfaces. 71#sppp_interfaces="isp0" # example: sppp over ISDN 72#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 73 74# User ppp configuration. 75ppp_enable="NO" # Start user-ppp (or NO). 76ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 77 # For details see man page for ppp(8). Default is auto. 78ppp_nat="YES" # Use PPP's internal network address translation or NO. 79ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 80 81### Network daemon (miscellaneous) & NFS options: ### 82syslogd_enable="YES" # Run syslog daemon (or NO). 83syslogd_flags="-s" # Flags to syslogd (if enabled). 84inetd_enable="YES" # Run the network daemon dispatcher (or NO). 85inetd_flags="-wW" # Optional flags to inetd 86# 87# named. It may be possible to run named in a sandbox, man security for 88# details. 89# 90named_enable="NO" # Run named, the DNS server (or NO). 91named_program="named" # path to named, if you want a different one. 92named_flags="" # Flags for named 93#named_flags="-u bind -g bind" # Flags for named 94 95kerberos_server_enable="NO" # Run a kerberos master server (or NO). 96kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 97 # a slave kerberos server 98kerberos_stash="" # Is the kerberos master key stashed? 99rwhod_enable="NO" # Run the rwho daemon (or NO). 100rwhod_flags="" # Flags for rwhod 101amd_enable="NO" # Run amd service with $amd_flags (or NO). 102amd_flags="-a /.amd_mnt -c 1800 -l syslog /host /etc/amd.map /net /etc/amd.map" 103amd_map_program="NO" # Can be set to "ypcat -k amd.master" 104nfs_client_enable="NO" # This host is an NFS client (or NO). 105nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 106nfs_access_cache="2" # Client cache timeout in seconds 107nfs_server_enable="NO" # This host is an NFS server (or NO). 108nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 109single_mountd_enable="NO" # Run mountd only (or NO). 110mountd_flags="-r" # Flags to mountd (if NFS server enabled). 111nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 112nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) 113rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 114rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 115portmap_enable="YES" # Run the portmapper service (or NO). 116portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 117portmap_flags="" # Flags to portmap (if enabled). 118rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 119keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 120keyserv_flags="" # Flags to keyserv (if enabled). 121rarpd_enable="NO" # Run rarpd (or NO). 122rarpd_flags="" # Flags to rarpd. 123xtend_enable="NO" # Run the X-10 power controller daemon. 124xtend_flags="" # Flags to xtend (if enabled). 125pppoed_enable="NO" # Run the PPP over Ethernet daemon. 126pppoed_provider="*" # Provider and ppp(8) config file entry. 127pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 128pppoed_interface="fxp0" # The interface that pppoed runs on. 129sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 130sshd_enable="NO" # Enable sshd 131sshd_flags="" # Additional flags for sshd. 132 133### Network Time Services options: ### 134timed_enable="NO" # Run the time daemon (or NO). 135timed_flags="" # Flags to timed (if enabled). 136ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 137ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 138ntpdate_flags="" # Flags to ntpdate (if enabled). 139xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 140xntpd_program="ntpd" # path to ntpd, if you want a different one. 141xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 142 143# Network Information Services (NIS) options: ### 144nis_client_enable="NO" # We're an NIS client (or NO). 145nis_client_flags="" # Flags to ypbind (if enabled). 146nis_ypset_enable="NO" # Run ypset at boot time (or NO). 147nis_ypset_flags="" # Flags to ypset (if enabled). 148nis_server_enable="NO" # We're an NIS server (or NO). 149nis_server_flags="" # Flags to ypserv (if enabled). 150nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 151nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 152nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 153nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 154 155### Network routing options: ### 156defaultrouter="NO" # Set to default gateway (or NO). 157static_routes="" # Set to static route list (or leave empty). 158gateway_enable="NO" # Set to YES if this host will be a gateway. 159router_enable="NO" # Set to YES to enable a routing daemon. 160router="routed" # Name of routing daemon to use if enabled. 161router_flags="-q" # Flags for routing daemon. 162mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 163mrouted_flags="" # Flags for multicast routing daemon. 164ipxgateway_enable="NO" # Set to YES to enable IPX routing. 165ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 166ipxrouted_flags="" # Flags for IPX routing daemon. 167arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 168forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 169accept_sourceroute="NO" # accept source routed packets to us 170 171### ATM interface options: ### 172atm_enable="NO" # Configure ATM interfaces (or NO). 173#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 174#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 175#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 176#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 177#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 178#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 179atm_pvcs="" # Set to PVC list (or leave empty). 180atm_arps="" # Set to permanent ARP list (or leave empty). 181 182### ISDN interface options: ### 183isdn_enable="NO" # Enable the ISDN subsystem (or NO). 184isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 185isdn_flags="-dn -d0x1f9" # Flags for isdnd 186isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 187isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 188 189### Miscellaneous network options: ### 190icmp_bmcastecho="NO" # respond to broadcast ping packets 191 192### IPv6 options: ### 193ipv6_enable="NO" # Set to YES to set up for IPv6. 194ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 195ipv6_static_routes="" # Set to static route list (or leave empty). 196#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 197 # route toward loopback interface. 198#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 199ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 200ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 201ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 202ipv6_router_flags="" # Flags to IPv6 routing daemon. 203#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 204 # addrs. 205#ipv6_network_interfaces="ed0 ep0" # Examples for router. 206 # Choose correct prefix value. 207#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 208#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 209ipv6_default_interface="" # Default output interface for scoped addrs. 210 # Now this works only for IPv6 link local 211 # multicast addrs. 212prefixcmd_enable="YES" # Use prefix command to assign router prefix. 213rtadvd_enable="YES" # Set to YES to enable an IPv6 router 214 # advertisement daemon. If set to YES, 215 # this router becomes a possible candidate 216 # IPv6 default router for local subnets. 217mroute6d_enable="NO" # Do IPv6 multicast routing. 218mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing 219 # daemon. 220mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 221gif_interfaces="NO" # List of GIF tunnels (or "NO"). 222#gif_interfaces="gif0 gif1" # Examples typically for a router. 223 # Choose correct tunnel addrs. 224#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 225#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 226stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 227 # tunneling interface. Specify this entry 228 # to enable 6to4 interface. 229stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 230 # to limit peer addr range. Effective value 231 # is 0-31. 232stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 233 # If you like, you can set "AUTO" for this. 234stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 235 236############################################################## 237### System console options ################################# 238############################################################## 239 240keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 241keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 242keybell="NO" # bell to duration.pitch or normal or visual (or NO). 243keychange="NO" # function keys default values (or NO). 244cursor="NO" # cursor type {normal|blink|destructive} (or NO). 245scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 246font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 247font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 248font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 249blanktime="300" # blank time (in seconds) or "NO" to turn it off. 250saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 251moused_enable="NO" # Run the mouse daemon. 252moused_type="auto" # See man page for rc.conf(5) for available settings. 253moused_port="/dev/psm0" # Set to your mouse port. 254moused_flags="" # Any additional flags to moused. 255allscreens_flags="" # Set this vidcontrol mode for all virtual screens 256 257 258############################################################## 259### Miscellaneous administrative options ################### 260############################################################## 261 262cron_enable="YES" # Run the periodic job daemon. 263lpd_enable="NO" # Run the line printer daemon. 264lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 265lpd_flags="" # Flags to lpd (if enabled). 266usbd_enable="NO" # Run the usbd daemon. 267usbd_flags="" # Flags to usbd (if enabled). 268sendmail_enable="YES" # Run the sendmail daemon (or NO). 269sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 270dumpdev="NO" # Device name to crashdump to (or NO). 271enable_quotas="NO" # turn on quotas on startup (or NO). 272check_quotas="YES" # Check quotas on startup (or NO). 273accounting_enable="NO" # Turn on process accounting (or NO). 274ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 275linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 276svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 277osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 278rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 279clear_tmp_enable="NO" # Clear /tmp at startup. 280ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 281 # shared library search paths 282ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 283 # a.out shared library search paths 284kern_securelevel_enable="NO" # kernel security level (see init(8)), 285kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 286update_motd="YES" # update version info in /etc/motd (or NO) 287start_vinum="" # set to YES to start vinum 288 289############################################################## 290### Allow local configuration override at the very end here ## 291############################################################## 292# 293# 294 295for i in ${rc_conf_files}; do 296 if [ -f $i ]; then 297 . $i 298 fi 299done 300 301