rc.conf revision 57458
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# A common mistake is to copy the contents of this file into one of the 11# ${rc_conf_files} files (e.g. /etc/rc.conf). That does not work, because 12# this file ends up recursing on itself. The ${rc_conf_files} files should 13# only contain values which override values set in this file. 14# 15# All arguments must be in double or single quotes. 16# 17# $FreeBSD: head/etc/defaults/rc.conf 57458 2000-02-24 23:08:19Z markm $ 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23swapfile="NO" # Set to name of swapfile if aux swapfile desired. 24apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 25apmd_enable="NO" # Run apmd to handle APM event from userland. 26apmd_flags="" # Flags to apmd (if enabled). 27pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 28pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 29pccard_beep="1" # pccard beep type. 30pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 31pccardd_flags="" # Additional flags for pccardd. 32pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file 33local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 34local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 35rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 36 37############################################################## 38### Network configuration sub-section ###################### 39############################################################## 40 41### Basic network options: ### 42hostname="" # Set this! 43nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 44dhcp_program="/sbin/dhclient" # Path to dhcp client program. 45dhcp_flags="" # Additional flags to pass to dhcp client. 46firewall_enable="NO" # Set to YES to enable firewall functionality 47firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 48firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 49firewall_quiet="NO" # Set to YES to suppress rule display 50firewall_flags="" # Flags passed to ipfw when type is a file 51natd_program="/sbin/natd" # path to natd, if you want a different one. 52natd_enable="NO" # Enable natd (if firewall_enable == YES). 53natd_interface="fxp0" # Public interface or IPaddress to use. 54natd_flags="" # Additional flags for natd. 55tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 56log_in_vain="NO" # YES to log connects to ports w/o listeners. 57tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 58tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 59 # NOTE: this breaks rfc1644 extensions (T/TCP) 60tcp_restrict_rst="NO" # Set to YES to restrict emission of RST 61icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 62icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 63network_interfaces="auto" # List of network interfaces (or "auto"). 64ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 65#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 66# 67# If you have any sppp(4) interfaces above, you might also want to set 68# the following parameters. Refer to spppcontrol(8) for their meaning. 69sppp_interfaces="" # List of sppp interfaces. 70#sppp_interfaces="isp0" # example: sppp over ISDN 71#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 72 73# User ppp configuration. 74ppp_enable="NO" # Start user-ppp (or NO). 75ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 76 # For details see man page for ppp(8). Default is auto. 77ppp_nat="YES" # Use PPP's internal network address translation or NO. 78ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 79 80### Network daemon (miscellaneous) & NFS options: ### 81syslogd_enable="YES" # Run syslog daemon (or NO). 82syslogd_flags="" # Flags to syslogd (if enabled). 83inetd_enable="YES" # Run the network daemon dispatcher (or NO). 84inetd_flags="-wW" # Optional flags to inetd 85# 86# named. It may be possible to run named in a sandbox, man security for 87# details. 88# 89named_enable="NO" # Run named, the DNS server (or NO). 90named_program="named" # path to named, if you want a different one. 91named_flags="" # Flags for named 92#named_flags="-u bind -g bind" # Flags for named 93 94kerberos_server_enable="NO" # Run a kerberos master server (or NO). 95kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 96 # a slave kerberos server 97kerberos_stash="" # Is the kerberos master key stashed? 98rwhod_enable="NO" # Run the rwho daemon (or NO). 99rwhod_flags="" # Flags for rwhod 100amd_enable="NO" # Run amd service with $amd_flags (or NO). 101amd_flags="-a /.amd_mnt -c 1800 -l syslog /host /etc/amd.map /net /etc/amd.map" 102amd_map_program="NO" # Can be set to "ypcat -k amd.master" 103nfs_client_enable="NO" # This host is an NFS client (or NO). 104nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 105nfs_access_cache="2" # Client cache timeout in seconds 106nfs_server_enable="NO" # This host is an NFS server (or NO). 107nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 108single_mountd_enable="NO" # Run mountd only (or NO). 109mountd_flags="-r" # Flags to mountd (if NFS server enabled). 110nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 111rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 112rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 113portmap_enable="YES" # Run the portmapper service (or NO). 114portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 115portmap_flags="" # Flags to portmap (if enabled). 116rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 117keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 118keyserv_flags="" # Flags to keyserv (if enabled). 119rarpd_enable="NO" # Run rarpd (or NO). 120rarpd_flags="" # Flags to rarpd. 121xtend_enable="NO" # Run the X-10 power controller daemon. 122xtend_flags="" # Flags to xtend (if enabled). 123pppoed_enable="NO" # Run the PPP over Ethernet daemon. 124pppoed_provider="*" # Provider and ppp(8) config file entry. 125pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 126pppoed_interface="fxp0" # The interface that pppoed runs on. 127sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 128sshd_enable="NO" # Enable sshd 129sshd_flags="" # Additional flags for sshd. 130 131### Network Time Services options: ### 132timed_enable="NO" # Run the time daemon (or NO). 133timed_flags="" # Flags to timed (if enabled). 134ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 135ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 136ntpdate_flags="" # Flags to ntpdate (if enabled). 137xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 138xntpd_program="ntpd" # path to ntpd, if you want a different one. 139xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 140 141# Network Information Services (NIS) options: ### 142nis_client_enable="NO" # We're an NIS client (or NO). 143nis_client_flags="" # Flags to ypbind (if enabled). 144nis_ypset_enable="NO" # Run ypset at boot time (or NO). 145nis_ypset_flags="" # Flags to ypset (if enabled). 146nis_server_enable="NO" # We're an NIS server (or NO). 147nis_server_flags="" # Flags to ypserv (if enabled). 148nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 149nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 150nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 151nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 152 153### Network routing options: ### 154defaultrouter="NO" # Set to default gateway (or NO). 155static_routes="" # Set to static route list (or leave empty). 156gateway_enable="NO" # Set to YES if this host will be a gateway. 157router_enable="NO" # Set to YES to enable a routing daemon. 158router="routed" # Name of routing daemon to use if enabled. 159router_flags="-q" # Flags for routing daemon. 160mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 161mrouted_flags="" # Flags for multicast routing daemon. 162ipxgateway_enable="NO" # Set to YES to enable IPX routing. 163ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 164ipxrouted_flags="" # Flags for IPX routing daemon. 165arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 166forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 167accept_sourceroute="NO" # accept source routed packets to us 168 169### ATM interface options: ### 170atm_enable="NO" # Configure ATM interfaces (or NO). 171#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 172#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 173#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 174#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 175#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 176#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 177atm_pvcs="" # Set to PVC list (or leave empty). 178atm_arps="" # Set to permanent ARP list (or leave empty). 179 180### ISDN interface options: ### 181isdn_enable="NO" # Enable the ISDN subsystem (or NO). 182isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 183isdn_flags="-dn -d0x1f9" # Flags for isdnd 184isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 185isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 186 187### Miscellaneous network options: ### 188icmp_bmcastecho="NO" # respond to broadcast ping packets 189 190### IPv6 options: ### 191ipv6_enable="NO" # Set to YES to set up for IPv6. 192ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 193ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 194ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 195ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 196ipv6_router_flags="" # Flags to IPv6 routing daemon. 197#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 198 # addrs. 199#ipv6_network_interfaces="ed0 ep0" # Examples for router. 200 # Choose correct prefix value. 201#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 202#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 203ipv6_default_interface="" # Default output interface for scoped addrs. 204 # Now this works only for IPv6 link local 205 # multicast addrs. 206prefixcmd_enable="YES" # Use prefix command to assign router prefix. 207rtadvd_enable="NO" # Set to YES to enable an IPv6 router 208 # advertisement daemon. 209mroute6d_enable="NO" # Do IPv6 multicast routing. 210mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing 211 # daemon. 212mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 213gif_interfaces="NO" # List of GIF tunnels (or "NO"). 214#gif_interfaces="gif0 gif1" # Examples typically for a router. 215 # Choose correct tunnel addrs. 216#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 217#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 218 219############################################################## 220### System console options ################################# 221############################################################## 222 223keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 224keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 225keybell="NO" # bell to duration.pitch or normal or visual (or NO). 226keychange="NO" # function keys default values (or NO). 227cursor="NO" # cursor type {normal|blink|destructive} (or NO). 228scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 229font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 230font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 231font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 232blanktime="300" # blank time (in seconds) or "NO" to turn it off. 233saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 234moused_enable="NO" # Run the mouse daemon. 235moused_type="auto" # See man page for rc.conf(5) for available settings. 236moused_port="/dev/psm0" # Set to your mouse port. 237moused_flags="" # Any additional flags to moused. 238allscreens_flags="" # Set this vidcontrol mode for all virtual screens 239 240 241############################################################## 242### Miscellaneous administrative options ################### 243############################################################## 244 245cron_enable="YES" # Run the periodic job daemon. 246lpd_enable="NO" # Run the line printer daemon. 247lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 248lpd_flags="" # Flags to lpd (if enabled). 249usbd_enable="NO" # Run the usbd daemon. 250usbd_flags="" # Flags to usbd (if enabled). 251sendmail_enable="YES" # Run the sendmail daemon (or NO). 252sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 253dumpdev="NO" # Device name to crashdump to (or NO). 254enable_quotas="NO" # turn on quotas on startup (or NO). 255check_quotas="YES" # Check quotas on startup (or NO). 256accounting_enable="NO" # Turn on process accounting (or NO). 257ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 258linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 259svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 260osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 261rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 262clear_tmp_enable="NO" # Clear /tmp at startup. 263ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 264 # shared library search paths 265ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 266 # a.out shared library search paths 267kern_securelevel_enable="NO" # kernel security level (see init(8)), 268kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 269update_motd="YES" # update version info in /etc/motd (or NO) 270start_vinum="" # set to YES to start vinum 271 272############################################################## 273### Allow local configuration override at the very end here ## 274############################################################## 275# 276# 277 278for i in ${rc_conf_files}; do 279 if [ -f $i ]; then 280 . $i 281 fi 282done 283 284