rc.conf revision 51209
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# All arguments must be in double or single quotes. 11# 12# $FreeBSD: head/etc/defaults/rc.conf 51209 1999-09-12 17:22:08Z des $ 13 14############################################################## 15### Important initial Boot-time options #################### 16############################################################## 17 18swapfile="NO" # Set to name of swapfile if aux swapfile desired. 19apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 20apmd_enable="NO" # Run apmd to handle APM event from userland. 21apmd_flags="" # Flags to apmd (if enabled). 22pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 23pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 24pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 25pccardd_flags="" # Additional flags for pccardd. 26pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file 27local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 28local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 29rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 30man_locales="NO" # space separated list of man locales (or NO) 31 32############################################################## 33### Network configuration sub-section ###################### 34############################################################## 35 36### Basic network options: ### 37hostname="" # Set this! 38nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 39dhcp_program="/sbin/dhclient" # Path to dhcp client program. 40dhcp_flags="" # Additional flags to pass to dhcp client. 41firewall_enable="NO" # Set to YES to enable firewall functionality 42firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 43firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 44firewall_quiet="NO" # Set to YES to suppress rule display 45natd_program="/sbin/natd" # path to natd, if you want a different one. 46natd_enable="NO" # Enable natd (if firewall_enable == YES). 47natd_interface="fxp0" # Public interface or IPaddress to use. 48natd_flags="" # Additional flags for natd. 49tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 50log_in_vain="NO" # YES to log connects to ports w/o listeners. 51tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 52tcp_restrict_rst="NO" # Set to YES to restrict emission of RST 53tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 54 # NOTE: this breaks rfc1644 extensions (T/TCP) 55icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 56icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 57network_interfaces="auto" # List of network interfaces (or "auto"). 58ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 59#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 60# 61# If you have any sppp(4) interfaces above, you might also want to set 62# the following parameters. Refer to spppcontrol(8) for their meaning. 63sppp_interfaces="" # List of sppp interfaces. 64#sppp_interfaces="isp0" # example: sppp over ISDN 65#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 66 67# Use ppp configuration. 68ppp_enable="NO" # Start user-ppp (or NO). 69ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 70 # For details see man page for ppp(8). Default is auto. 71ppp_nat="YES" # Use PPP's internal network address translation or NO. 72ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 73 74### Network daemon (miscellaneous) & NFS options: ### 75syslogd_enable="YES" # Run syslog daemon (or NO). 76syslogd_flags="" # Flags to syslogd (if enabled). 77inetd_enable="YES" # Run the network daemon dispatcher (or NO). 78inetd_flags="-wW" # Optional flags to inetd 79# 80# named. It may be possible to run named in a sandbox, man security for 81# details. 82# 83named_enable="NO" # Run named, the DNS server (or NO). 84named_program="named" # path to named, if you want a different one. 85named_flags="" # Flags for named 86#named_flags="-u bind -g bind" # Flags for named 87 88kerberos_server_enable="NO" # Run a kerberos master server (or NO). 89kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 90 # a slave kerberos server 91kerberos_stash="" # Is the kerberos master key stashed? 92rwhod_enable="NO" # Run the rwho daemon (or NO). 93rwhod_flags="" # Flags for rwhod 94amd_enable="NO" # Run amd service with $amd_flags (or NO). 95amd_flags="-a /.amd_mnt -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map /net /etc/amd.map" 96amd_map_program="NO" # Can be set to "ypcat -k amd.master" 97nfs_client_enable="NO" # This host is an NFS client (or NO). 98nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 99nfs_access_cache="2" # Client cache timeout in seconds 100nfs_server_enable="NO" # This host is an NFS server (or NO). 101nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 102mountd_flags="-r" # Flags to mountd (if NFS server enabled). 103nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 104rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 105rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 106portmap_enable="YES" # Run the portmapper service (or NO). 107portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 108portmap_flags="" # Flags to portmap (if enabled). 109rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 110keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 111keyserv_flags="" # Flags to keyserv (if enabled). 112rarpd_enable="NO" # Run rarpd (or NO). 113rarpd_flags="" # Flags to rarpd. 114xtend_enable="NO" # Run the X-10 power controller daemon. 115xtend_flags="" # Flags to xtend (if enabled). 116 117### Network Time Services options: ### 118timed_enable="NO" # Run the time daemon (or NO). 119timed_flags="" # Flags to timed (if enabled). 120ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 121ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 122ntpdate_flags="" # Flags to ntpdate (if enabled). 123xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). 124xntpd_program="xntpd" # path to xntpd, if you want a different one. 125xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). 126 127# Network Information Services (NIS) options: ### 128nis_client_enable="NO" # We're an NIS client (or NO). 129nis_client_flags="" # Flags to ypbind (if enabled). 130nis_ypset_enable="NO" # Run ypset at boot time (or NO). 131nis_ypset_flags="" # Flags to ypset (if enabled). 132nis_server_enable="NO" # We're an NIS server (or NO). 133nis_server_flags="" # Flags to ypserv (if enabled). 134nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 135nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 136nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 137nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 138 139### Network routing options: ### 140defaultrouter="NO" # Set to default gateway (or NO). 141static_routes="" # Set to static route list (or leave empty). 142gateway_enable="NO" # Set to YES if this host will be a gateway. 143router_enable="NO" # Set to YES to enable a routing daemon. 144router="routed" # Name of routing daemon to use if enabled. 145router_flags="-q" # Flags for routing daemon. 146mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 147mrouted_flags="" # Flags for multicast routing daemon. 148ipxgateway_enable="NO" # Set to YES to enable IPX routing. 149ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 150ipxrouted_flags="" # Flags for IPX routing daemon. 151arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 152forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 153accept_sourceroute="NO" # accept source routed packets to us 154 155### ATM interface options: ### 156atm_enable="NO" # Configure ATM interfaces (or NO). 157#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 158#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 159#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 160#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 161#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 162#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 163atm_pvcs="" # Set to PVC list (or leave empty). 164atm_arps="" # Set to permanent ARP list (or leave empty). 165 166### ISDN interface options: ### 167isdn_enable="NO" # Enable the ISDN subsystem (or NO). 168isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 169isdn_flags="-dn -d0x1f9" # Flags for isdnd 170isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 171isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 172 173### Miscellaneous network options: ### 174icmp_bmcastecho="NO" # respond to broadcast ping packets 175 176 177############################################################## 178### System console options ################################# 179############################################################## 180 181keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 182keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 183keybell="NO" # bell to duration.pitch or normal or visual (or NO). 184keychange="NO" # function keys default values (or NO). 185cursor="NO" # cursor type {normal|blink|destructive} (or NO). 186scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 187font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 188font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 189font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 190blanktime="300" # blank time (in seconds) or "NO" to turn it off. 191saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 192moused_enable="NO" # Run the mouse daemon. 193moused_type="auto" # See man page for rc.conf(5) for available settings. 194moused_port="/dev/cuaa0" # Set to your mouse port. 195moused_flags="" # Any additional flags to moused. 196allscreens_flags="" # Set this vidcontrol mode for all virtual screens 197 198 199############################################################## 200### Miscellaneous administrative options ################### 201############################################################## 202 203cron_enable="YES" # Run the periodic job daemon. 204lpd_enable="NO" # Run the line printer daemon. 205lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 206lpd_flags="" # Flags to lpd (if enabled). 207usbd_enable="NO" # Run the usbd daemon. 208usbd_flags="" # Flags to usbd (if enabled). 209sendmail_enable="YES" # Run the sendmail daemon (or NO). 210sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 211dumpdev="NO" # Device name to crashdump to (if enabled). 212enable_quotas="NO" # turn on quotas on startup (or NO). 213check_quotas="YES" # Check quotas on startup (or NO). 214accounting_enable="NO" # Turn on process accounting (or NO). 215ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 216linux_enable="NO" # Linux emulation loaded at startup (or NO). 217svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 218rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 219clear_tmp_enable="NO" # Clear /tmp at startup. 220ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 221 # shared library search paths 222ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 223 # a.out shared library search paths 224kern_securelevel_enable="NO" # kernel security level (see init(8)), 225kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 226update_motd="YES" # update version info in /etc/motd (or NO) 227start_vinum="" # set to YES to start vinum 228vinum_drives="" # put in names of disks containing vinum drives 229 # to start vinum on only specific disks. 230 231############################################################## 232### Allow local configuration override at the very end here ## 233############################################################## 234# 235# 236 237for i in ${rc_conf_files}; do 238 if [ -f $i ]; then 239 . $i 240 fi 241done 242 243