rc.conf revision 50472
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# All arguments must be in double or single quotes. 11# 12# $FreeBSD: head/etc/defaults/rc.conf 50472 1999-08-27 23:37:10Z peter $ 13 14############################################################## 15### Important initial Boot-time options #################### 16############################################################## 17 18swapfile="NO" # Set to name of swapfile if aux swapfile desired. 19apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 20apmd_enable="NO" # Run apmd to handle APM event from userland. 21apmd_flags="" # Flags to apmd (if enabled). 22pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 23pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 24pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 25pccardd_flags="" # Additional flags for pccardd. 26pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file 27local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 28local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 29rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 30 31############################################################## 32### Network configuration sub-section ###################### 33############################################################## 34 35### Basic network options: ### 36hostname="" # Set this! 37nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 38dhcp_program="/sbin/dhclient" # Path to dhcp client program. 39dhcp_flags="" # Additional flags to pass to dhcp client. 40firewall_enable="NO" # Set to YES to enable firewall functionality 41firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 42firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 43firewall_quiet="NO" # Set to YES to suppress rule display 44natd_program="/sbin/natd" # path to natd, if you want a different one. 45natd_enable="NO" # Enable natd (if firewall_enable == YES). 46natd_interface="fxp0" # Public interface or IPaddress to use. 47natd_flags="" # Additional flags for natd. 48tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. 49log_in_vain="NO" # YES to log connects to ports w/o listeners. 50tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 51icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 52icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 53network_interfaces="auto" # List of network interfaces (or "auto"). 54ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 55#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 56# 57# If you have any sppp(4) interfaces above, you might also want to set 58# the following parameters. Refer to spppcontrol(8) for their meaning. 59sppp_interfaces="" # List of sppp interfaces. 60#sppp_interfaces="isp0" # example: sppp over ISDN 61#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 62 63# Use ppp configuration. 64ppp_enable="NO" # Start user-ppp (or NO). 65ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 66 # For details see man page for ppp(8). Default is auto. 67ppp_nat="YES" # Use PPP's internal network address translation or NO. 68ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 69 70### Network daemon (miscellaneous) & NFS options: ### 71syslogd_enable="YES" # Run syslog daemon (or NO). 72syslogd_flags="" # Flags to syslogd (if enabled). 73inetd_enable="YES" # Run the network daemon dispatcher (or NO). 74inetd_flags="-wW" # Optional flags to inetd 75# 76# named. It may be possible to run named in a sandbox, man security for 77# details. 78# 79named_enable="NO" # Run named, the DNS server (or NO). 80named_program="named" # path to named, if you want a different one. 81named_flags="" # Flags for named 82#named_flags="-u bind -g bind" # Flags for named 83 84kerberos_server_enable="NO" # Run a kerberos master server (or NO). 85kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 86 # a slave kerberos server 87kerberos_stash="" # Is the kerberos master key stashed? 88rwhod_enable="NO" # Run the rwho daemon (or NO). 89rwhod_flags="" # Flags for rwhod 90amd_enable="NO" # Run amd service with $amd_flags (or NO). 91amd_flags="-a /.amd_mnt -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map /net /etc/amd.map" 92amd_map_program="NO" # Can be set to "ypcat -k amd.master" 93nfs_client_enable="NO" # This host is an NFS client (or NO). 94nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 95nfs_access_cache="2" # Client cache timeout in seconds 96nfs_server_enable="NO" # This host is an NFS server (or NO). 97nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 98mountd_flags="-r" # Flags to mountd (if NFS server enabled). 99nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 100rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 101rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 102portmap_enable="YES" # Run the portmapper service (or NO). 103portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 104portmap_flags="" # Flags to portmap (if enabled). 105rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 106keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 107keyserv_flags="" # Flags to keyserv (if enabled). 108rarpd_enable="NO" # Run rarpd (or NO). 109rarpd_flags="" # Flags to rarpd. 110xtend_enable="NO" # Run the X-10 power controller daemon. 111xtend_flags="" # Flags to xtend (if enabled). 112 113### Network Time Services options: ### 114timed_enable="NO" # Run the time daemon (or NO). 115timed_flags="" # Flags to timed (if enabled). 116ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 117ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 118ntpdate_flags="" # Flags to ntpdate (if enabled). 119xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). 120xntpd_program="xntpd" # path to xntpd, if you want a different one. 121xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). 122 123# Network Information Services (NIS) options: ### 124nis_client_enable="NO" # We're an NIS client (or NO). 125nis_client_flags="" # Flags to ypbind (if enabled). 126nis_ypset_enable="NO" # Run ypset at boot time (or NO). 127nis_ypset_flags="" # Flags to ypset (if enabled). 128nis_server_enable="NO" # We're an NIS server (or NO). 129nis_server_flags="" # Flags to ypserv (if enabled). 130nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 131nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 132nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 133nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 134 135### Network routing options: ### 136defaultrouter="NO" # Set to default gateway (or NO). 137static_routes="" # Set to static route list (or leave empty). 138gateway_enable="NO" # Set to YES if this host will be a gateway. 139router_enable="NO" # Set to YES to enable a routing daemon. 140router="routed" # Name of routing daemon to use if enabled. 141router_flags="-q" # Flags for routing daemon. 142mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 143mrouted_flags="" # Flags for multicast routing daemon. 144ipxgateway_enable="NO" # Set to YES to enable IPX routing. 145ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 146ipxrouted_flags="" # Flags for IPX routing daemon. 147arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 148forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 149accept_sourceroute="NO" # accept source routed packets to us 150 151### ATM interface options: ### 152atm_enable="NO" # Configure ATM interfaces (or NO). 153#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 154#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 155#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 156#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 157#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 158#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 159atm_pvcs="" # Set to PVC list (or leave empty). 160atm_arps="" # Set to permanent ARP list (or leave empty). 161 162### ISDN interface options: ### 163isdn_enable="NO" # Enable the ISDN subsystem (or NO). 164isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 165isdn_flags="-dn -d0x1f9" # Flags for isdnd 166isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 167isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 168 169### Miscellaneous network options: ### 170icmp_bmcastecho="NO" # respond to broadcast ping packets 171 172 173############################################################## 174### System console options ################################# 175############################################################## 176 177keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 178keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 179keybell="NO" # bell to duration.pitch or normal or visual (or NO). 180keychange="NO" # function keys default values (or NO). 181cursor="NO" # cursor type {normal|blink|destructive} (or NO). 182scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 183font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 184font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 185font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 186blanktime="300" # blank time (in seconds) or "NO" to turn it off. 187saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 188moused_enable="NO" # Run the mouse daemon. 189moused_type="auto" # See man page for rc.conf(5) for available settings. 190moused_port="/dev/cuaa0" # Set to your mouse port. 191moused_flags="" # Any additional flags to moused. 192allscreens_flags="" # Set this vidcontrol mode for all virtual screens 193 194 195############################################################## 196### Miscellaneous administrative options ################### 197############################################################## 198 199cron_enable="YES" # Run the periodic job daemon. 200lpd_enable="NO" # Run the line printer daemon. 201lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 202lpd_flags="" # Flags to lpd (if enabled). 203usbd_enable="NO" # Run the usbd daemon. 204usbd_flags="" # Flags to usbd (if enabled). 205sendmail_enable="YES" # Run the sendmail daemon (or NO). 206sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 207dumpdev="NO" # Device name to crashdump to (if enabled). 208enable_quotas="NO" # turn on quotas on startup (or NO). 209check_quotas="NO" # Check quotas on startup (or NO). 210accounting_enable="NO" # Turn on process accounting (or NO). 211ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 212linux_enable="NO" # Linux emulation loaded at startup (or NO). 213svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 214rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 215clear_tmp_enable="NO" # Clear /tmp at startup. 216ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 217 # shared library search paths 218ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 219 # a.out shared library search paths 220kern_securelevel_enable="NO" # kernel security level (see init(8)), 221kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 222update_motd="YES" # update version info in /etc/motd (or NO) 223start_vinum="" # set to YES to start vinum 224vinum_drives="" # put in names of disks containing vinum drives 225 # to start vinum on only specific disks. 226 227############################################################## 228### Allow local configuration override at the very end here ## 229############################################################## 230# 231# 232 233for i in ${rc_conf_files}; do 234 if [ -f $i ]; then 235 . $i 236 fi 237done 238 239