rc.conf revision 48747
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# All arguments must be in double or single quotes. 11# 12# $Id: rc.conf,v 1.18 1999/07/09 11:19:01 sheldonh Exp $ 13 14############################################################## 15### Important initial Boot-time options #################### 16############################################################## 17 18swapfile="NO" # Set to name of swapfile if aux swapfile desired. 19apm_enable="NO" # Set to YES if you want APM enabled. 20apmd_enable="NO" # Set to YES if you want APM daemon enabled. 21apmd_flags="" # Additional flags for apmd. 22pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 23pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 24pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 25pccardd_flags="" # Additional flags for pccardd. 26pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file 27local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 28local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 29rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 30 31############################################################## 32### Network configuration sub-section ###################### 33############################################################## 34 35### Basic network options: ### 36hostname="myname.my.domain" # Set this! 37nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 38firewall_enable="NO" # Set to YES to enable firewall functionality 39firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 40firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 41firewall_quiet="NO" # Set to YES to suppress rule display 42natd_program="/sbin/natd" # path to natd, if you want a different one. 43natd_enable="NO" # Enable natd (if firewall_enable == YES). 44natd_interface="fxp0" # Public interface or IPaddress to use. 45natd_flags="" # Additional flags for natd. 46tcp_extensions="NO" # Set to Yes to turn on RFC1323 extensions. 47log_in_vain="NO" # Disallow bad connection logging (or YES). 48tcp_keepalive="YES" # Kill dead TCP connections (or NO). 49network_interfaces="auto" # List of network interfaces (or "auto"). 50ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 51#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 52# 53# If you have any sppp(4) interfaces above, you might also want to set 54# the following parameters. Refer to spppcontrol(8) for their meaning. 55sppp_interfaces="" # List of sppp interfaces. 56#sppp_interfaces="isp0" # example: sppp over ISDN 57#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 58 59### Network daemon (miscellaneous) & NFS options: ### 60syslogd_enable="YES" # Run syslog daemon (or NO). 61syslogd_flags="" # Flags to syslogd (if enabled). 62inetd_enable="YES" # Run the network daemon dispatcher (or NO). 63inetd_flags="-wW" # Optional flags to inetd 64# 65# named. It may be possible to run named in a sandbox, man security for 66# details. 67# 68named_enable="NO" # Run named, the DNS server (or NO). 69named_program="named" # path to named, if you want a different one. 70named_flags="" # Flags for named 71#named_flags="-u bind -g bind" # Flags for named 72 73kerberos_server_enable="NO" # Run a kerberos master server (or NO). 74kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 75 # a slave kerberos server 76kerberos_stash="" # Is the kerberos master key stashed? 77rwhod_enable="NO" # Run the rwho daemon (or NO). 78rwhod_flags="" # Flags for rwhod 79amd_enable="NO" # Run amd service with $amd_flags (or NO). 80amd_flags="-a /.amd_mnt -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map /net /etc/amd.map" 81amd_map_program="NO" # Can be set to "ypcat -k amd.master" 82nfs_client_enable="NO" # This host is an NFS client (or NO). 83nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 84nfs_access_cache="2" # Client cache timeout in seconds 85nfs_server_enable="NO" # This host is an NFS server (or NO). 86nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 87mountd_flags="-r" # Flags to mountd (if NFS server enabled). 88nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 89rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 90rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 91portmap_enable="YES" # Run the portmapper service (or NO). 92portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 93portmap_flags="" # Flags to portmap (if enabled). 94rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 95keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 96keyserv_flags="" # Flags to keyserv (if enabled). 97rarpd_enable="NO" # Run rarpd (or NO). 98rarpd_flags="" # Flags to rarpd. 99xtend_enable="NO" # Run the X-10 power controller daemon. 100xtend_flags="" # Flags to xtend (if enabled). 101 102### Network Time Services options: ### 103timed_enable="NO" # Run the time daemon (or NO). 104timed_flags="" # Flags to timed (if enabled). 105ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). 106ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 107ntpdate_flags="" # Flags to ntpdate (if enabled). 108xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). 109xntpd_program="xntpd" # path to xntpd, if you want a different one. 110xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). 111 112# Network Information Services (NIS) options: ### 113nis_client_enable="NO" # We're an NIS client (or NO). 114nis_client_flags="" # Flags to ypbind (if enabled). 115nis_ypset_enable="NO" # Run ypset at boot time (or NO). 116nis_ypset_flags="" # Flags to ypset (if enabled). 117nis_server_enable="NO" # We're an NIS server (or NO). 118nis_server_flags="" # Flags to ypserv (if enabled). 119nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 120nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 121nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 122nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 123 124### Network routing options: ### 125defaultrouter="NO" # Set to default gateway (or NO). 126static_routes="" # Set to static route list (or leave empty). 127gateway_enable="NO" # Set to YES if this host will be a gateway. 128router_enable="NO" # Set to YES to enable a routing daemon. 129router="routed" # Name of routing daemon to use if enabled. 130router_flags="-q" # Flags for routing daemon. 131mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 132mrouted_flags="" # Flags for multicast routing daemon. 133ipxgateway_enable="NO" # Set to YES to enable IPX routing. 134ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 135ipxrouted_flags="" # Flags for IPX routing daemon. 136arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 137forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 138accept_sourceroute="NO" # accept source routed packets to us 139 140### ATM interface options: ### 141atm_enable="NO" # Configure ATM interfaces (or NO). 142#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 143#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 144#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 145#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 146#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 147#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 148atm_pvcs="" # Set to PVC list (or leave empty). 149atm_arps="" # Set to permanent ARP list (or leave empty). 150 151### ISDN interface options: ### 152isdn_enable="NO" # Enable the ISDN subsystem (or NO). 153isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 154isdn_flags="-dn -d0x1f9" # Flags for isdnd 155isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 156isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 157 158### Miscellaneous network options: ### 159icmp_bmcastecho="NO" # respond to broadcast ping packets 160 161 162############################################################## 163### System console options ################################# 164############################################################## 165 166keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 167keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 168keybell="NO" # bell to duration.pitch or normal or visual (or NO). 169keychange="NO" # function keys default values (or NO). 170cursor="NO" # cursor type {normal|blink|destructive} (or NO). 171scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 172font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 173font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 174font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 175blanktime="300" # blank time (in seconds) or "NO" to turn it off. 176saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 177moused_enable="NO" # Run the mouse daemon. 178moused_type="auto" # See man page for rc.conf(5) for available settings. 179moused_port="/dev/cuaa0" # Set to your mouse port. 180moused_flags="" # Any additional flags to moused. 181allscreens_flags="" # Set this vidcontrol mode for all virtual screens 182 183 184############################################################## 185### Miscellaneous administrative options ################### 186############################################################## 187 188cron_enable="YES" # Run the periodic job daemon. 189lpd_enable="NO" # Run the line printer daemon. 190lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 191lpd_flags="" # Flags to lpd (if enabled). 192usbd_enable="NO" # Run the usbd daemon. 193usbd_flags="" # Flags to usbd (if enabled). 194sendmail_enable="YES" # Run the sendmail daemon (or NO). 195sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 196dumpdev="NO" # Device name to crashdump to (if enabled). 197enable_quotas="NO" # turn on quotas on startup (or NO). 198check_quotas="NO" # Check quotas on startup (or NO). 199accounting_enable="NO" # Turn on process accounting (or NO). 200ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 201linux_enable="NO" # Linux emulation loaded at startup (or NO). 202svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 203rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 204clear_tmp_enable="NO" # Clear /tmp at startup. 205ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 206 # shared library search paths 207ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 208 # a.out shared library search paths 209kern_securelevel_enable="NO" # kernel security level (see init(8)), 210kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 211update_motd="YES" # update version info in /etc/motd (or NO) 212start_vinum="" # set to YES to start vinum 213vinum_drives="" # put in names of disks containing vinum drives 214 # to start vinum on only specific disks. 215 216############################################################## 217### Allow local configuration override at the very end here ## 218############################################################## 219# 220# 221 222for i in ${rc_conf_files}; do 223 if [ -f $i ]; then 224 . $i 225 fi 226done 227 228