rc.conf revision 48697
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# All arguments must be in double or single quotes. 11# 12# $Id: rc.conf,v 1.17 1999/07/08 18:56:04 peter Exp $ 13 14############################################################## 15### Important initial Boot-time options #################### 16############################################################## 17 18swapfile="NO" # Set to name of swapfile if aux swapfile desired. 19apm_enable="NO" # Set to YES if you want APM enabled. 20pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 21pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 22pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 23pccardd_flags="" # Additional flags for pccardd. 24pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file 25local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 26local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 27rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 28 29############################################################## 30### Network configuration sub-section ###################### 31############################################################## 32 33### Basic network options: ### 34hostname="myname.my.domain" # Set this! 35nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 36firewall_enable="NO" # Set to YES to enable firewall functionality 37firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 38firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 39firewall_quiet="NO" # Set to YES to suppress rule display 40natd_program="/sbin/natd" # path to natd, if you want a different one. 41natd_enable="NO" # Enable natd (if firewall_enable == YES). 42natd_interface="fxp0" # Public interface or IPaddress to use. 43natd_flags="" # Additional flags for natd. 44tcp_extensions="NO" # Set to Yes to turn on RFC1323 extensions. 45log_in_vain="NO" # Disallow bad connection logging (or YES). 46tcp_keepalive="YES" # Kill dead TCP connections (or NO). 47network_interfaces="auto" # List of network interfaces (or "auto"). 48ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 49#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 50# 51# If you have any sppp(4) interfaces above, you might also want to set 52# the following parameters. Refer to spppcontrol(8) for their meaning. 53sppp_interfaces="" # List of sppp interfaces. 54#sppp_interfaces="isp0" # example: sppp over ISDN 55#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 56 57### Network daemon (miscellaneous) & NFS options: ### 58syslogd_enable="YES" # Run syslog daemon (or NO). 59syslogd_flags="" # Flags to syslogd (if enabled). 60inetd_enable="YES" # Run the network daemon dispatcher (or NO). 61inetd_flags="-wW" # Optional flags to inetd 62# 63# named. It may be possible to run named in a sandbox, man security for 64# details. 65# 66named_enable="NO" # Run named, the DNS server (or NO). 67named_program="named" # path to named, if you want a different one. 68named_flags="" # Flags for named 69#named_flags="-u bind -g bind" # Flags for named 70 71kerberos_server_enable="NO" # Run a kerberos master server (or NO). 72kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 73 # a slave kerberos server 74kerberos_stash="" # Is the kerberos master key stashed? 75rwhod_enable="NO" # Run the rwho daemon (or NO). 76rwhod_flags="" # Flags for rwhod 77amd_enable="NO" # Run amd service with $amd_flags (or NO). 78amd_flags="-a /.amd_mnt -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map /net /etc/amd.map" 79amd_map_program="NO" # Can be set to "ypcat -k amd.master" 80nfs_client_enable="NO" # This host is an NFS client (or NO). 81nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 82nfs_access_cache="2" # Client cache timeout in seconds 83nfs_server_enable="NO" # This host is an NFS server (or NO). 84nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 85mountd_flags="-r" # Flags to mountd (if NFS server enabled). 86nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 87rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 88rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 89portmap_enable="YES" # Run the portmapper service (or NO). 90portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 91portmap_flags="" # Flags to portmap (if enabled). 92rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 93keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 94keyserv_flags="" # Flags to keyserv (if enabled). 95rarpd_enable="NO" # Run rarpd (or NO). 96rarpd_flags="" # Flags to rarpd. 97xtend_enable="NO" # Run the X-10 power controller daemon. 98xtend_flags="" # Flags to xtend (if enabled). 99 100### Network Time Services options: ### 101timed_enable="NO" # Run the time daemon (or NO). 102timed_flags="" # Flags to timed (if enabled). 103ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). 104ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 105ntpdate_flags="" # Flags to ntpdate (if enabled). 106xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). 107xntpd_program="xntpd" # path to xntpd, if you want a different one. 108xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). 109 110# Network Information Services (NIS) options: ### 111nis_client_enable="NO" # We're an NIS client (or NO). 112nis_client_flags="" # Flags to ypbind (if enabled). 113nis_ypset_enable="NO" # Run ypset at boot time (or NO). 114nis_ypset_flags="" # Flags to ypset (if enabled). 115nis_server_enable="NO" # We're an NIS server (or NO). 116nis_server_flags="" # Flags to ypserv (if enabled). 117nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 118nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 119nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 120nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 121 122### Network routing options: ### 123defaultrouter="NO" # Set to default gateway (or NO). 124static_routes="" # Set to static route list (or leave empty). 125gateway_enable="NO" # Set to YES if this host will be a gateway. 126router_enable="NO" # Set to YES to enable a routing daemon. 127router="routed" # Name of routing daemon to use if enabled. 128router_flags="-q" # Flags for routing daemon. 129mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 130mrouted_flags="" # Flags for multicast routing daemon. 131ipxgateway_enable="NO" # Set to YES to enable IPX routing. 132ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 133ipxrouted_flags="" # Flags for IPX routing daemon. 134arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 135forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 136accept_sourceroute="NO" # accept source routed packets to us 137 138### ATM interface options: ### 139atm_enable="NO" # Configure ATM interfaces (or NO). 140#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 141#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 142#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 143#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 144#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 145#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 146atm_pvcs="" # Set to PVC list (or leave empty). 147atm_arps="" # Set to permanent ARP list (or leave empty). 148 149### ISDN interface options: ### 150isdn_enable="NO" # Enable the ISDN subsystem (or NO). 151isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 152isdn_flags="-dn -d0x1f9" # Flags for isdnd 153isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 154isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 155 156### Miscellaneous network options: ### 157icmp_bmcastecho="NO" # respond to broadcast ping packets 158 159 160############################################################## 161### System console options ################################# 162############################################################## 163 164keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 165keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 166keybell="NO" # bell to duration.pitch or normal or visual (or NO). 167keychange="NO" # function keys default values (or NO). 168cursor="NO" # cursor type {normal|blink|destructive} (or NO). 169scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 170font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 171font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 172font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 173blanktime="300" # blank time (in seconds) or "NO" to turn it off. 174saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 175moused_enable="NO" # Run the mouse daemon. 176moused_type="auto" # See man page for rc.conf(5) for available settings. 177moused_port="/dev/cuaa0" # Set to your mouse port. 178moused_flags="" # Any additional flags to moused. 179allscreens_flags="" # Set this vidcontrol mode for all virtual screens 180 181 182############################################################## 183### Miscellaneous administrative options ################### 184############################################################## 185 186cron_enable="YES" # Run the periodic job daemon. 187lpd_enable="NO" # Run the line printer daemon. 188lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 189lpd_flags="" # Flags to lpd (if enabled). 190usbd_enable="NO" # Run the usbd daemon. 191usbd_flags="" # Flags to usbd (if enabled). 192sendmail_enable="YES" # Run the sendmail daemon (or NO). 193sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 194dumpdev="NO" # Device name to crashdump to (if enabled). 195enable_quotas="NO" # turn on quotas on startup (or NO). 196check_quotas="NO" # Check quotas on startup (or NO). 197accounting_enable="NO" # Turn on process accounting (or NO). 198ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 199linux_enable="NO" # Linux emulation loaded at startup (or NO). 200svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 201rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 202clear_tmp_enable="NO" # Clear /tmp at startup. 203ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 204 # shared library search paths 205ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 206 # a.out shared library search paths 207kern_securelevel_enable="NO" # kernel security level (see init(8)), 208kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 209update_motd="YES" # update version info in /etc/motd (or NO) 210start_vinum="" # set to YES to start vinum 211vinum_drives="" # put in names of disks containing vinum drives 212 # to start vinum on only specific disks. 213 214############################################################## 215### Allow local configuration override at the very end here ## 216############################################################## 217# 218# 219 220for i in ${rc_conf_files}; do 221 if [ -f $i ]; then 222 . $i 223 fi 224done 225 226