rc.conf revision 47248
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# All arguments must be in double or single quotes. 11# 12# $Id: rc.conf,v 1.8 1999/04/10 10:56:56 des Exp $ 13 14############################################################## 15### Important initial Boot-time options ##################### 16############################################################## 17 18swapfile="NO" # Set to name of swapfile if aux swapfile desired. 19apm_enable="NO" # Set to YES if you want APM enabled. 20pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 21pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 22pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 23local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 24local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 25rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 26 27############################################################## 28### Network configuration sub-section ###################### 29############################################################## 30 31### Basic network options: ### 32hostname="myname.my.domain" # Set this! 33nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 34firewall_enable="NO" # Set to YES to enable firewall functionality 35firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 36firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 37firewall_quiet="NO" # Set to YES to suppress rule display 38natd_program="/sbin/natd" # path to natd, if you want a different one. 39natd_enable="NO" # Enable natd (if firewall_enable == YES). 40natd_interface="fxp0" # Public interface or IPaddress to use. 41natd_flags="" # Additional flags for natd. 42tcp_extensions="NO" # Set to Yes to turn on RFC1323 extensions. 43log_in_vain="NO" # Disallow bad connection logging (or YES). 44network_interfaces="lo0" # List of network interfaces (lo0 is loopback). 45ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 46#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 47# 48# If you have any sppp(4) interfaces above, you might also want to set 49# the following parameters. Refer to spppcontrol(8) for their meaning. 50sppp_interfaces="" # List of sppp interfaces. 51#sppp_interfaces="isp0" # example: sppp over ISDN 52#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 53 54### Network daemon (miscellaneous) & NFS options: ### 55syslogd_enable="YES" # Run syslog daemon (or NO). 56syslogd_flags="" # Flags to syslogd (if enabled). 57inetd_enable="YES" # Run the network daemon dispatcher (or NO). 58inetd_flags="" # Optional flags to inetd. 59# 60# named. It may be possible to run named in a sandbox, man security for 61# details. 62# 63named_enable="NO" # Run named, the DNS server (or NO). 64named_program="named" # path to named, if you want a different one. 65named_flags="" # Flags for named 66#named_flags="-u bind -g bind" # Flags for named 67 68kerberos_server_enable="NO" # Run a kerberos master server (or NO). 69kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 70 # a slave kerberos server 71kerberos_stash="" # Is the kerberos master key stashed? 72rwhod_enable="NO" # Run the rwho daemon (or NO). 73rwhod_flags="" # Flags for rwhod 74amd_enable="NO" # Run amd service with $amd_flags (or NO). 75amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" 76amd_map_program="NO" # Can be set to "ypcat -k amd.master" 77nfs_client_enable="NO" # This host is an NFS client (or NO). 78nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 79nfs_access_cache="2" # Client cache timeout in seconds 80nfs_server_enable="NO" # This host is an NFS server (or NO). 81nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 82mountd_flags="-r" # Flags to mountd (if NFS server enabled). 83nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 84rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 85rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 86portmap_enable="YES" # Run the portmapper service (or NO). 87portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 88portmap_flags="" # Flags to portmap (if enabled). 89rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 90keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 91keyserv_flags="" # Flags to keyserv (if enabled). 92rarpd_enable="NO" # Run rarpd (or NO). 93rarpd_flags="" # Flags to rarpd. 94xtend_enable="NO" # Run the X-10 power controller daemon. 95xtend_flags="" # Flags to xtend (if enabled). 96 97### Network Time Services options: ### 98timed_enable="NO" # Run the time daemon (or NO). 99timed_flags="" # Flags to timed (if enabled). 100ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). 101ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 102ntpdate_flags="" # Flags to ntpdate (if enabled). 103xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). 104xntpd_program="xntpd" # path to xntpd, if you want a different one. 105xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). 106 107# Network Information Services (NIS) options: ### 108nis_client_enable="NO" # We're an NIS client (or NO). 109nis_client_flags="" # Flags to ypbind (if enabled). 110nis_ypset_enable="NO" # Run ypset at boot time (or NO). 111nis_ypset_flags="" # Flags to ypset (if enabled). 112nis_server_enable="NO" # We're an NIS server (or NO). 113nis_server_flags="" # Flags to ypserv (if enabled). 114nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 115nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 116nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 117nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 118 119### Network routing options: ### 120defaultrouter="NO" # Set to default gateway (or NO). 121static_routes="" # Set to static route list (or leave empty). 122gateway_enable="NO" # Set to YES if this host will be a gateway. 123router_enable="NO" # Set to YES to enable a routing daemon. 124router="routed" # Name of routing daemon to use if enabled. 125router_flags="-q" # Flags for routing daemon. 126mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 127mrouted_flags="" # Flags for multicast routing daemon. 128ipxgateway_enable="NO" # Set to YES to enable IPX routing. 129ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 130ipxrouted_flags="" # Flags for IPX routing daemon. 131arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 132forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 133accept_sourceroute="NO" # accept source routed packets to us 134 135### ATM interface options: ### 136atm_enable="NO" # Configure ATM interfaces (or NO). 137#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 138#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 139#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 140#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 141#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 142#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 143atm_pvcs="" # Set to PVC list (or leave empty). 144atm_arps="" # Set to permanent ARP list (or leave empty). 145 146### ISDN interface options: ### 147isdn_enable="NO" # Enable the ISDN subsystem (or NO). 148isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 149isdn_flags="-dn -d0x1f9" # Flags for isdnd 150isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 151isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 152 153### Miscellaneous network options: ### 154icmp_bmcastecho="NO" # respond to broadcast ping packets 155 156 157############################################################## 158### System console options ################################# 159############################################################## 160 161keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 162keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 163keybell="NO" # bell to duration.pitch or normal or visual (or NO). 164keychange="NO" # function keys default values (or NO). 165cursor="NO" # cursor type {normal|blink|destructive} (or NO). 166scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 167font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 168font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 169font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 170blanktime="300" # blank time (in seconds) or "NO" to turn it off. 171saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 172moused_enable="NO" # Run the mouse daemon. 173moused_type="auto" # See man page for rc.conf(5) for available settings. 174moused_port="/dev/cuaa0" # Set to your mouse port. 175moused_flags="" # Any additional flags to moused. 176allscreens_flags="" # Set this vidcontrol mode for all virtual screens 177 178 179############################################################## 180### Miscellaneous administrative options ################### 181############################################################## 182 183cron_enable="YES" # Run the periodic job daemon. 184lpd_enable="NO" # Run the line printer daemon. 185lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 186lpd_flags="" # Flags to lpd (if enabled). 187usbd_enable="NO" # Run the usbd daemon. 188usbd_flags="" # Flags to usbd (if enabled). 189sendmail_enable="YES" # Run the sendmail daemon (or NO). 190sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 191dumpdev="NO" # Device name to crashdump to (if enabled). 192enable_quotas="NO" # turn on quotas on startup (or NO). 193check_quotas="NO" # Check quotas on startup (or NO). 194accounting_enable="NO" # Turn on process accounting (or NO). 195ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 196linux_enable="NO" # Linux emulation loaded at startup (or NO). 197svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 198rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 199clear_tmp_enable="NO" # Clear /tmp at startup. 200ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 201 # shared library search paths 202ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 203 # a.out shared library search paths 204kern_securelevel_enable="NO" # kernel security level (see init(8)), 205kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 206update_motd="YES" # update version info in /etc/motd (or NO) 207start_vinum="" # set to YES to start vinum 208vinum_drives="" # put in names of disks containing vinum drives 209 # to start vinum on only specific disks. 210 211############################################################## 212### Allow local configuration override at the very end here ## 213############################################################## 214# 215# 216 217for i in ${rc_conf_files}; do 218 if [ -f $i ]; then 219 . $i 220 fi 221done 222 223