rc.conf revision 45239
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# All arguments must be in double or single quotes. 11# 12# $Id: rc.conf,v 1.6 1999/03/28 20:36:03 imp Exp $ 13 14############################################################## 15### Important initial Boot-time options ##################### 16############################################################## 17 18swapfile="NO" # Set to name of swapfile if aux swapfile desired. 19apm_enable="NO" # Set to YES if you want APM enabled. 20pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 21pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 22pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 23local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 24local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 25rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 26 27############################################################## 28### Network configuration sub-section ###################### 29############################################################## 30 31### Basic network options: ### 32hostname="myname.my.domain" # Set this! 33nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 34firewall_enable="NO" # Set to YES to enable firewall functionality 35firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 36firewall_quiet="NO" # Set to YES to suppress rule display 37natd_program="/sbin/natd" # path to natd, if you want a different one. 38natd_enable="NO" # Enable natd (if firewall_enable == YES). 39natd_interface="fxp0" # Public interface or IPaddress to use. 40natd_flags="" # Additional flags for natd. 41tcp_extensions="NO" # Disallow RFC1323 extensions (or YES). 42log_in_vain="NO" # Disallow bad connection logging (or YES). 43network_interfaces="lo0" # List of network interfaces (lo0 is loopback). 44ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 45#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 46# 47# If you have any sppp(4) interfaces above, you might also want to set 48# the following parameters. Refer to spppcontrol(8) for their meaning. 49sppp_interfaces="" # List of sppp interfaces. 50#sppp_interfaces="isp0" # example: sppp over ISDN 51#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 52 53### Network daemon (miscellaneous) & NFS options: ### 54syslogd_enable="YES" # Run syslog daemon (or NO). 55syslogd_flags="" # Flags to syslogd (if enabled). 56inetd_enable="YES" # Run the network daemon dispatcher (or NO). 57inetd_flags="" # Optional flags to inetd. 58# 59# named. It may be possible to run named in a sandbox, man security for 60# details. 61# 62named_enable="NO" # Run named, the DNS server (or NO). 63named_program="named" # path to named, if you want a different one. 64named_flags="" # Flags for named 65#named_flags="-u bind -g bind" # Flags for named 66 67kerberos_server_enable="NO" # Run a kerberos master server (or NO). 68kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 69 # a slave kerberos server 70kerberos_stash="" # Is the kerberos master key stashed? 71rwhod_enable="NO" # Run the rwho daemon (or NO). 72rwhod_flags="" # Flags for rwhod 73amd_enable="NO" # Run amd service with $amd_flags (or NO). 74amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" 75amd_map_program="NO" # Can be set to "ypcat -k amd.master" 76nfs_client_enable="NO" # This host is an NFS client (or NO). 77nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 78nfs_access_cache="2" # Client cache timeout in seconds 79nfs_server_enable="NO" # This host is an NFS server (or NO). 80nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 81mountd_flags="-r" # Flags to mountd (if NFS server enabled). 82nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 83rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 84rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 85portmap_enable="YES" # Run the portmapper service (or NO). 86portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 87portmap_flags="" # Flags to portmap (if enabled). 88rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 89keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 90keyserv_flags="" # Flags to keyserv (if enabled). 91rarpd_enable="NO" # Run rarpd (or NO). 92rarpd_flags="" # Flags to rarpd. 93xtend_enable="NO" # Run the X-10 power controller daemon. 94xtend_flags="" # Flags to xtend (if enabled). 95 96### Network Time Services options: ### 97timed_enable="NO" # Run the time daemon (or NO). 98timed_flags="" # Flags to timed (if enabled). 99ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). 100ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 101ntpdate_flags="" # Flags to ntpdate (if enabled). 102xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). 103xntpd_program="xntpd" # path to xntpd, if you want a different one. 104xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). 105 106# Network Information Services (NIS) options: ### 107nis_client_enable="NO" # We're an NIS client (or NO). 108nis_client_flags="" # Flags to ypbind (if enabled). 109nis_ypset_enable="NO" # Run ypset at boot time (or NO). 110nis_ypset_flags="" # Flags to ypset (if enabled). 111nis_server_enable="NO" # We're an NIS server (or NO). 112nis_server_flags="" # Flags to ypserv (if enabled). 113nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 114nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 115nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 116nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 117 118### Network routing options: ### 119defaultrouter="NO" # Set to default gateway (or NO). 120static_routes="" # Set to static route list (or leave empty). 121gateway_enable="NO" # Set to YES if this host will be a gateway. 122router_enable="NO" # Set to YES to enable a routing daemon. 123router="routed" # Name of routing daemon to use if enabled. 124router_flags="-q" # Flags for routing daemon. 125mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 126mrouted_flags="" # Flags for multicast routing daemon. 127ipxgateway_enable="NO" # Set to YES to enable IPX routing. 128ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 129ipxrouted_flags="" # Flags for IPX routing daemon. 130arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 131forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 132accept_sourceroute="NO" # accept source routed packets to us 133 134### ATM interface options: ### 135atm_enable="NO" # Configure ATM interfaces (or NO). 136#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 137#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 138#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 139#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 140#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 141#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 142atm_pvcs="" # Set to PVC list (or leave empty). 143atm_arps="" # Set to permanent ARP list (or leave empty). 144 145### ISDN interface options: ### 146isdn_enable="NO" # Enable the ISDN subsystem (or NO). 147isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 148isdn_flags="-dn -d0x1f9" # Flags for isdnd 149isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 150isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 151 152### Miscellaneous network options: ### 153icmp_bmcastecho="NO" # respond to broadcast ping packets 154 155 156############################################################## 157### System console options ################################# 158############################################################## 159 160keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 161keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 162keybell="NO" # bell to duration.pitch or normal or visual (or NO). 163keychange="NO" # function keys default values (or NO). 164cursor="NO" # cursor type {normal|blink|destructive} (or NO). 165scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 166font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 167font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 168font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 169blanktime="300" # blank time (in seconds) or "NO" to turn it off. 170saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 171moused_enable="NO" # Run the mouse daemon. 172moused_type="auto" # See man page for rc.conf(5) for available settings. 173moused_port="/dev/cuaa0" # Set to your mouse port. 174moused_flags="" # Any additional flags to moused. 175allscreens_flags="" # Set this vidcontrol mode for all virtual screens 176 177 178############################################################## 179### Miscellaneous administrative options ################### 180############################################################## 181 182cron_enable="YES" # Run the periodic job daemon. 183lpd_enable="NO" # Run the line printer daemon. 184lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 185lpd_flags="" # Flags to lpd (if enabled). 186usbd_enable="NO" # Run the usbd daemon. 187usbd_flags="" # Flags to usbd (if enabled). 188sendmail_enable="YES" # Run the sendmail daemon (or NO). 189sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 190dumpdev="NO" # Device name to crashdump to (if enabled). 191enable_quotas="NO" # turn on quotas on startup (or NO). 192check_quotas="NO" # Check quotas on startup (or NO). 193accounting_enable="NO" # Turn on process accounting (or NO). 194ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 195linux_enable="NO" # Linux emulation loaded at startup (or NO). 196svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 197rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 198clear_tmp_enable="NO" # Clear /tmp at startup. 199ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 200 # shared library search paths 201ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 202 # a.out shared library search paths 203kern_securelevel_enable="NO" # kernel security level (see init(8)), 204kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 205update_motd="YES" # update version info in /etc/motd (or NO) 206start_vinum="" # set to YES to start vinum 207vinum_drives="" # put in names of disks containing vinum drives 208 # to start vinum on only specific disks. 209 210############################################################## 211### Allow local configuration override at the very end here ## 212############################################################## 213# 214# 215 216for i in ${rc_conf_files}; do 217 if [ -f $i ]; then 218 . $i 219 fi 220done 221 222