rc.conf revision 44990
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# All arguments must be in double or single quotes. 11# 12# $Id: rc.conf,v 1.4 1999/03/17 04:00:04 billf Exp $ 13 14############################################################## 15### Important initial Boot-time options ##################### 16############################################################## 17 18swapfile="NO" # Set to name of swapfile if aux swapfile desired. 19apm_enable="NO" # Set to YES if you want APM enabled. 20pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 21pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 22pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 23local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 24local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs 25rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 26 27############################################################## 28### Network configuration sub-section ###################### 29############################################################## 30 31### Basic network options: ### 32hostname="myname.my.domain" # Set this! 33nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 34firewall_enable="NO" # Set to YES to enable firewall functionality 35firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 36firewall_quiet="NO" # Set to YES to suppress rule display 37natd_program="/sbin/natd" # path to natd, if you want a different one. 38natd_enable="NO" # Enable natd (if firewall_enable == YES). 39natd_interface="fxp0" # Public interface or IPaddress to use. 40natd_flags="" # Additional flags for natd. 41tcp_extensions="NO" # Disallow RFC1323 extensions (or YES). 42network_interfaces="lo0" # List of network interfaces (lo0 is loopback). 43ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 44#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 45# 46# If you have any sppp(4) interfaces above, you might also want to set 47# the following parameters. Refer to spppcontrol(8) for their meaning. 48sppp_interfaces="" # List of sppp interfaces. 49#sppp_interfaces="isp0" # example: sppp over ISDN 50#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 51 52### Network daemon (miscellaneous) & NFS options: ### 53syslogd_enable="YES" # Run syslog daemon (or NO). 54syslogd_flags="" # Flags to syslogd (if enabled). 55inetd_enable="YES" # Run the network daemon dispatcher (or NO). 56inetd_flags="" # Optional flags to inetd. 57# 58# named. It may be possible to run named in a sandbox, man security for 59# details. 60# 61named_enable="NO" # Run named, the DNS server (or NO). 62named_program="named" # path to named, if you want a different one. 63named_flags="" # Flags for named 64#named_flags="-u bind -g bind" # Flags for named 65 66kerberos_server_enable="NO" # Run a kerberos master server (or NO). 67kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 68 # a slave kerberos server 69kerberos_stash="" # Is the kerberos master key stashed? 70rwhod_enable="NO" # Run the rwho daemon (or NO). 71rwhod_flags="" # Flags for rwhod 72amd_enable="NO" # Run amd service with $amd_flags (or NO). 73amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" 74amd_map_program="NO" # Can be set to "ypcat -k amd.master" 75nfs_client_enable="NO" # This host is an NFS client (or NO). 76nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 77nfs_access_cache="2" # Client cache timeout in seconds 78nfs_server_enable="NO" # This host is an NFS server (or NO). 79nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 80mountd_flags="-r" # Flags to mountd (if NFS server enabled). 81nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 82rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 83rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). 84portmap_enable="YES" # Run the portmapper service (or NO). 85portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. 86portmap_flags="" # Flags to portmap (if enabled). 87rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 88keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 89keyserv_flags="" # Flags to keyserv (if enabled). 90rarpd_enable="NO" # Run rarpd (or NO). 91rarpd_flags="" # Flags to rarpd. 92xtend_enable="NO" # Run the X-10 power controller daemon. 93xtend_flags="" # Flags to xtend (if enabled). 94 95### Network Time Services options: ### 96timed_enable="NO" # Run the time daemon (or NO). 97timed_flags="" # Flags to timed (if enabled). 98ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). 99ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 100ntpdate_flags="" # Flags to ntpdate (if enabled). 101xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). 102xntpd_program="xntpd" # path to xntpd, if you want a different one. 103xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). 104 105# Network Information Services (NIS) options: ### 106nis_client_enable="NO" # We're an NIS client (or NO). 107nis_client_flags="" # Flags to ypbind (if enabled). 108nis_ypset_enable="NO" # Run ypset at boot time (or NO). 109nis_ypset_flags="" # Flags to ypset (if enabled). 110nis_server_enable="NO" # We're an NIS server (or NO). 111nis_server_flags="" # Flags to ypserv (if enabled). 112nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 113nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 114nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 115nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 116 117### Network routing options: ### 118defaultrouter="NO" # Set to default gateway (or NO). 119static_routes="" # Set to static route list (or leave empty). 120gateway_enable="NO" # Set to YES if this host will be a gateway. 121router_enable="NO" # Set to YES to enable a routing daemon. 122router="routed" # Name of routing daemon to use if enabled. 123router_flags="-q" # Flags for routing daemon. 124mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 125mrouted_flags="" # Flags for multicast routing daemon. 126ipxgateway_enable="NO" # Set to YES to enable IPX routing. 127ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 128ipxrouted_flags="" # Flags for IPX routing daemon. 129arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 130forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 131accept_sourceroute="NO" # accept source routed packets to us 132 133### ATM interface options: ### 134atm_enable="NO" # Configure ATM interfaces (or NO). 135#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 136#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 137#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 138#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 139#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 140#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 141atm_pvcs="" # Set to PVC list (or leave empty). 142atm_arps="" # Set to permanent ARP list (or leave empty). 143 144### ISDN interface options: ### 145isdn_enable="NO" # Enable the ISDN subsystem (or NO). 146isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 147isdn_flags="-dn -d0x1f9" # Flags for isdnd 148isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 149isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 150 151### Miscellaneous network options: ### 152icmp_bmcastecho="NO" # respond to broadcast ping packets 153 154 155############################################################## 156### System console options ################################# 157############################################################## 158 159keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 160keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 161keybell="NO" # bell to duration.pitch or normal or visual (or NO). 162keychange="NO" # function keys default values (or NO). 163cursor="NO" # cursor type {normal|blink|destructive} (or NO). 164scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 165font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 166font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 167font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 168blanktime="300" # blank time (in seconds) or "NO" to turn it off. 169saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 170moused_enable="NO" # Run the mouse daemon. 171moused_type="auto" # See man page for rc.conf(5) for available settings. 172moused_port="/dev/cuaa0" # Set to your mouse port. 173moused_flags="" # Any additional flags to moused. 174allscreens_flags="" # Set this vidcontrol mode for all virtual screens 175 176 177############################################################## 178### Miscellaneous administrative options ################### 179############################################################## 180 181cron_enable="YES" # Run the periodic job daemon. 182lpd_enable="NO" # Run the line printer daemon. 183lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 184lpd_flags="" # Flags to lpd (if enabled). 185usbd_enable="NO" # Run the usbd daemon. 186usbd_flags="" # Flags to usbd (if enabled). 187sendmail_enable="YES" # Run the sendmail daemon (or NO). 188sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) 189dumpdev="NO" # Device name to crashdump to (if enabled). 190enable_quotas="NO" # turn on quotas on startup (or NO). 191check_quotas="NO" # Check quotas on startup (or NO). 192accounting_enable="NO" # Turn on process accounting (or NO). 193ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 194linux_enable="NO" # Linux emulation loaded at startup (or NO). 195svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 196rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 197clear_tmp_enable="NO" # Clear /tmp at startup. 198ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 199 # shared library search paths 200ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 201 # a.out shared library search paths 202kern_securelevel_enable="NO" # kernel security level (see init(8)), 203kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 204update_motd="YES" # update version info in /etc/motd (or NO) 205vinum_drives="" # put in names of disks containing vinum drives 206 207############################################################## 208### Allow local configuration override at the very end here ## 209############################################################## 210# 211# 212 213for i in ${rc_conf_files}; do 214 if [ -f $i ]; then 215 . $i 216 fi 217done 218 219