rc.conf revision 238416
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 238416 2012-07-13 06:46:09Z kevlo $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rc_startmsgs="YES" # Show "Starting foo:" messages at boot 27rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 28early_late_divider="FILESYSTEMS" # Script that separates early/late 29 # stages of the boot process. Make sure you know 30 # the ramifications if you change this. 31 # See rc.conf(5) for more details. 32always_force_depends="NO" # Set to check that indicated dependencies are 33 # running during boot (can increase boot time). 34 35swapfile="NO" # Set to name of swapfile if aux swapfile desired. 36apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 37apmd_enable="NO" # Run apmd to handle APM event from userland. 38apmd_flags="" # Flags to apmd (if enabled). 39ddb_enable="NO" # Set to YES to load ddb scripts at boot. 40ddb_config="/etc/ddb.conf" # ddb(8) config file. 41devd_enable="YES" # Run devd, to trigger programs on device tree changes. 42devd_flags="" # Additional flags for devd(8). 43#kld_list="" # Kernel modules to load after local disks are mounted 44kldxref_enable="NO" # Build linker.hints files with kldxref(8). 45kldxref_clobber="NO" # Overwrite old linker.hints at boot. 46kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 47powerd_enable="NO" # Run powerd to lower our power usage. 48powerd_flags="" # Flags to powerd (if enabled). 49tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 50tmpsize="20m" # Size of mfs /tmp if created 51tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 52varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 53varsize="32m" # Size of mfs /var if created 54varmfs_flags="-S" # Extra mount options for the mfs /var 55populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 56cleanvar_enable="YES" # Clean the /var directory 57local_startup="/usr/local/etc/rc.d" # startup script dirs. 58script_name_sep=" " # Change if your startup scripts' names contain spaces 59rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 60 61# ZFS support 62zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 63 64gptboot_enable="YES" # GPT boot success/failure reporting. 65 66# Experimental - test before enabling 67gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 68gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 69gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 70gbde_lockdir="/etc" # Where to look for gbde lockfiles 71 72# GELI disk encryption configuration. 73geli_devices="" # List of devices to automatically attach in addition to 74 # GELI devices listed in /etc/fstab. 75geli_tries="" # Number of times to attempt attaching geli device. 76 # If empty, kern.geom.eli.tries will be used. 77geli_default_flags="" # Default flags for geli(8). 78geli_autodetach="YES" # Automatically detach on last close. 79 # Providers are marked as such when all file systems are 80 # mounted. 81# Example use. 82#geli_devices="da1 mirror/home" 83#geli_da1_flags="-p -k /etc/geli/da1.keys" 84#geli_da1_autodetach="NO" 85#geli_mirror_home_flags="-k /etc/geli/home.keys" 86 87geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 88 # swap partitions. 89 90root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 91fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 92fsck_y_flags="" # Additional flags for fsck -y 93background_fsck="YES" # Attempt to run fsck in the background where possible. 94background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 95netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 96extra_netfs_types="NO" # List of network extra filesystem types for delayed 97 # mount at startup (or NO). 98 99############################################################## 100### Network configuration sub-section ###################### 101############################################################## 102 103### Basic network and firewall/security options: ### 104hostname="" # Set this! 105hostid_enable="YES" # Set host UUID. 106hostid_file="/etc/hostid" # File with hostuuid. 107nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 108dhclient_program="/sbin/dhclient" # Path to dhcp client program. 109dhclient_flags="" # Extra flags to pass to dhcp client. 110#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 111background_dhclient="NO" # Start dhcp client in the background. 112#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 113synchronous_dhclient="NO" # Start dhclient directly on configured 114 # interfaces during startup. 115defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 116defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 117wpa_supplicant_program="/usr/sbin/wpa_supplicant" 118wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 119wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 120# 121firewall_enable="NO" # Set to YES to enable firewall functionality 122firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 123firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 124firewall_quiet="NO" # Set to YES to suppress rule display 125firewall_logging="NO" # Set to YES to enable events logging 126firewall_logif="NO" # Set to YES to create logging-pseudo interface 127firewall_flags="" # Flags passed to ipfw when type is a file 128firewall_coscripts="" # List of executables/scripts to run after 129 # firewall starts/stops 130firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 131 # firewall. 132#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 133 # "client" firewall. 134firewall_simple_iif="ed1" # Inside network interface for "simple" 135 # firewall. 136firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 137 # firewall. 138firewall_simple_oif="ed0" # Outside network interface for "simple" 139 # firewall. 140firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 141 # firewall. 142#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple" 143 # firewall. 144#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 145 # for "simple" firewall. 146#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple" 147 # firewall. 148#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 149 # for "simple" firewall. 150firewall_myservices="" # List of TCP ports on which this host 151 # offers services for "workstation" firewall. 152firewall_allowservices="" # List of IPs which have access to 153 # $firewall_myservices for "workstation" 154 # firewall. 155firewall_trusted="" # List of IPs which have full access to this 156 # host for "workstation" firewall. 157firewall_logdeny="NO" # Set to YES to log default denied incoming 158 # packets for "workstation" firewall. 159firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 160 # for which denied incoming packets are not 161 # logged for "workstation" firewall. 162firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 163firewall_nat_interface="" # Public interface or IPaddress to use 164firewall_nat_flags="" # Additional configuration parameters 165dummynet_enable="NO" # Load the dummynet(4) module 166ip_portrange_first="NO" # Set first dynamically allocated port 167ip_portrange_last="NO" # Set last dynamically allocated port 168ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 169ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 170ike_flags="" # Additional flags for IKE daemon 171ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 172ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 173natd_program="/sbin/natd" # path to natd, if you want a different one. 174natd_enable="NO" # Enable natd (if firewall_enable == YES). 175natd_interface="" # Public interface or IPaddress to use. 176natd_flags="" # Additional flags for natd. 177ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 178ipfilter_program="/sbin/ipf" # where the ipfilter program lives 179ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 180 # /usr/src/contrib/ipfilter/rules for examples 181ipfilter_flags="" # additional flags for ipfilter 182ipnat_enable="NO" # Set to YES to enable ipnat functionality 183ipnat_program="/sbin/ipnat" # where the ipnat program lives 184ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 185ipnat_flags="" # additional flags for ipnat 186ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 187ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 188ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 189ipfs_enable="NO" # Set to YES to enable saving and restoring 190 # of state tables at shutdown and boot 191ipfs_program="/sbin/ipfs" # where the ipfs program lives 192ipfs_flags="" # additional flags for ipfs 193pf_enable="NO" # Set to YES to enable packet filter (pf) 194pf_rules="/etc/pf.conf" # rules definition file for pf 195pf_program="/sbin/pfctl" # where the pfctl program lives 196pf_flags="" # additional flags for pfctl 197pflog_enable="NO" # Set to YES to enable packet filter logging 198pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 199pflog_program="/sbin/pflogd" # where the pflogd program lives 200pflog_flags="" # additional flags for pflogd 201ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 202ftpproxy_flags="" # additional flags for ftp-proxy(8) 203pfsync_enable="NO" # Expose pf state to other hosts for syncing 204pfsync_syncdev="" # Interface for pfsync to work through 205pfsync_syncpeer="" # IP address of pfsync peer host 206pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 207tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 208log_in_vain="0" # >=1 to log connects to ports w/o listeners. 209tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 210tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 211 # NOTE: this violates the TCP specification 212icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 213icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 214network_interfaces="auto" # List of network interfaces (or "auto"). 215cloned_interfaces="" # List of cloned network interfaces to create. 216#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 217#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 218#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 219#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 220#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 221#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 222#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 223#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device 224#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 225#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 226#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8) 227#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 228# 229#autobridge_interfaces="bridge0" # List of bridges to check 230#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 231# 232# If you have any sppp(4) interfaces above, you might also want to set 233# the following parameters. Refer to spppcontrol(8) for their meaning. 234sppp_interfaces="" # List of sppp interfaces. 235#sppp_interfaces="...0" # example: sppp over ... 236#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 237gif_interfaces="" # List of GIF tunnels. 238#gif_interfaces="gif0 gif1" # Examples typically for a router. 239 # Choose correct tunnel addrs. 240#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 241#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 242fec_interfaces="" # List of Fast EtherChannels. 243#fec_interfaces="fec0 fec1" 244#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 245#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 246 247# User ppp configuration. 248ppp_enable="NO" # Start user-ppp (or NO). 249ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 250ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 251 # For details see man page for ppp(8). Default is auto. 252ppp_nat="YES" # Use PPP's internal network address translation or NO. 253ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 254ppp_user="root" # Which user to run ppp as 255 256# Start multiple instances of ppp at boot time 257#ppp_profile="profile1 profile2 profile3" # Which profiles to use 258#ppp_profile1_mode="ddial" # Override ppp mode for profile1 259#ppp_profile2_nat="NO" # Override nat mode for profile2 260# profile3 uses default ppp_mode and ppp_nat 261 262### Network daemon (miscellaneous) ### 263hostapd_enable="NO" # Run hostap daemon. 264syslogd_enable="YES" # Run syslog daemon (or NO). 265syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 266syslogd_flags="-s" # Flags to syslogd (if enabled). 267inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 268inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 269inetd_flags="-wW -C 60" # Optional flags to inetd 270hastd_enable="NO" # Run the HAST daemon (YES/NO). 271hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 272hastd_flags="" # Optional flags to hastd. 273# 274# named. It may be possible to run named in a sandbox, man security for 275# details. 276# 277named_enable="NO" # Run named, the DNS server (or NO). 278named_program="/usr/sbin/named" # Path to named, if you want a different one. 279named_conf="/etc/namedb/named.conf" # Path to the configuration file 280#named_flags="" # Use this for flags OTHER than -u and -c 281named_uid="bind" # User to run named as 282named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 283named_chroot_autoupdate="YES" # Automatically install/update chrooted 284 # components of named. See /etc/rc.d/named. 285named_symlink_enable="YES" # Symlink the chrooted pid file 286named_wait="NO" # Wait for working name service before exiting 287named_wait_host="localhost" # Hostname to check if named_wait is enabled 288named_auto_forward="NO" # Set up forwarders from /etc/resolv.conf 289named_auto_forward_only="NO" # Do "forward only" instead of "forward first" 290 291# 292# kerberos. Do not run the admin daemons on slave servers 293# 294kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 295kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 296kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server 297kadmind5_server_enable="NO" # Run kadmind (or NO) 298kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 299kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 300kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 301kfd_enable="NO" # Run kfd (or NO) 302kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 303 304gssd_enable="NO" # Run the gssd daemon (or NO). 305gssd_flags="" # Flags for gssd. 306 307rwhod_enable="NO" # Run the rwho daemon (or NO). 308rwhod_flags="" # Flags for rwhod 309rarpd_enable="NO" # Run rarpd (or NO). 310rarpd_flags="-a" # Flags to rarpd. 311bootparamd_enable="NO" # Run bootparamd (or NO). 312bootparamd_flags="" # Flags to bootparamd 313pppoed_enable="NO" # Run the PPP over Ethernet daemon. 314pppoed_provider="*" # Provider and ppp(8) config file entry. 315pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 316pppoed_interface="fxp0" # The interface that pppoed runs on. 317sshd_enable="NO" # Enable sshd 318sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 319sshd_flags="" # Additional flags for sshd. 320ftpd_enable="NO" # Enable stand-alone ftpd. 321ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 322ftpd_flags="" # Additional flags to stand-alone ftpd. 323 324### Network daemon (NFS): All need rpcbind_enable="YES" ### 325amd_enable="NO" # Run amd service with $amd_flags (or NO). 326amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 327amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 328amd_map_program="NO" # Can be set to "ypcat -k amd.master" 329nfs_client_enable="NO" # This host is an NFS client (or NO). 330nfs_access_cache="60" # Client cache timeout in seconds 331nfs_server_enable="NO" # This host is an NFS server (or NO). 332oldnfs_server_enable="NO" # Run the old NFS server (YES/NO). 333nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 334mountd_enable="NO" # Run mountd (or NO). 335mountd_flags="-r" # Flags to mountd (if NFS server enabled). 336weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 337nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 338nfs_bufpackets="" # bufspace (in packets) for client 339rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 340rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 341rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 342rpc_statd_flags="" # Flags to rpc.statd (if enabled). 343rpcbind_enable="NO" # Run the portmapper service (YES/NO). 344rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 345rpcbind_flags="" # Flags to rpcbind (if enabled). 346rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 347keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 348keyserv_flags="" # Flags to keyserv (if enabled). 349nfsv4_server_enable="NO" # Enable support for NFSv4 350nfscbd_enable="NO" # NFSv4 client side callback daemon 351nfscbd_flags="" # Flags for nfscbd 352nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 353nfsuserd_flags="" # Flags for nfsuserd 354 355### Network Time Services options: ### 356timed_enable="NO" # Run the time daemon (or NO). 357timed_flags="" # Flags to timed (if enabled). 358ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 359ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 360ntpdate_flags="-b" # Flags to ntpdate (if enabled). 361ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 362ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 363ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 364ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 365ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 366ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 367ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 368 # Flags to ntpd (if enabled). 369 370# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 371nis_client_enable="NO" # We're an NIS client (or NO). 372nis_client_flags="" # Flags to ypbind (if enabled). 373nis_ypset_enable="NO" # Run ypset at boot time (or NO). 374nis_ypset_flags="" # Flags to ypset (if enabled). 375nis_server_enable="NO" # We're an NIS server (or NO). 376nis_server_flags="" # Flags to ypserv (if enabled). 377nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 378nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 379nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 380nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 381 382### SNMP daemon ### 383# Be sure to understand the security implications of running SNMP v1/v2 384# in your network. 385bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 386bsnmpd_flags="" # Flags for bsnmpd. 387 388### Network routing options: ### 389defaultrouter="NO" # Set to default gateway (or NO). 390static_arp_pairs="" # Set to static ARP list (or leave empty). 391static_ndp_pairs="" # Set to static NDP list (or leave empty). 392static_routes="" # Set to static route list (or leave empty). 393natm_static_routes="" # Set to static route list for NATM (or leave empty). 394gateway_enable="NO" # Set to YES if this host will be a gateway. 395routed_enable="NO" # Set to YES to enable a routing daemon. 396routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 397routed_flags="-q" # Flags for routing daemon. 398mrouted_enable="NO" # Do IPv4 multicast routing. 399mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 400 # routing daemon. You need to 401 # install it from package or 402 # port. 403mrouted_flags="" # Flags for multicast routing daemon. 404ipxgateway_enable="NO" # Set to YES to enable IPX routing. 405ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 406ipxrouted_flags="" # Flags for IPX routing daemon. 407arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 408forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 409accept_sourceroute="NO" # accept source routed packets to us 410 411### ATM interface options: ### 412atm_enable="NO" # Configure ATM interfaces (or NO). 413#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 414#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 415#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 416#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 417#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 418#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 419atm_pvcs="" # Set to PVC list (or leave empty). 420atm_arps="" # Set to permanent ARP list (or leave empty). 421 422### Bluetooth ### 423hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 424hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 425 426sdpd_enable="NO" # Enable sdpd(8) (or NO) 427sdpd_control="/var/run/sdp" # sdpd(8) control socket 428sdpd_groupname="nobody" # set spdp(8) user/group to run as after 429sdpd_username="nobody" # it initializes 430 431bthidd_enable="NO" # Enable bthidd(8) (or NO) 432bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 433bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 434 435rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 436rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 437# 438#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 439rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 440#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 441#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 442# 443#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 444rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 445#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 446#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 447 448ubthidhci_enable="NO" # Switch an USB BT controller present on 449#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 450#ubthidhci_addr="2" # Check usbconfig list to find the correct 451 # numbers for your system. 452 453### Network link/usability verification options 454netwait_enable="NO" # Enable rc.d/netwait (or NO) 455#netwait_ip="" # IP addresses to be pinged by netwait. 456netwait_timeout="60" # Total number of seconds to perform pings. 457#netwait_if="" # Interface name to watch link state on. 458netwait_if_timeout="30" # Total number of seconds to monitor link state. 459 460### Miscellaneous network options: ### 461icmp_bmcastecho="NO" # respond to broadcast ping packets 462 463### IPv6 options: ### 464ipv6_network_interfaces="auto" # List of IPv6 network interfaces 465 # (or "auto" or "none"). 466ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 467 # corresponding $ifconfig_IF_ipv6 is 468 # marked as IFDISABLED for security 469 # reason. 470ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 471#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 472ipv6_static_routes="" # Set to static route list (or leave empty). 473#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 474 # route toward loopback interface. 475#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 476ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 477ipv6_cpe_wanif="NO" # Set to the upstram interface name if this 478 # node will work as a router to forward IPv6 479 # packets not explicitly addressed to itself. 480ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 481 # (RFC 4941) 482 483route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 484route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 485route6d_flags="" # Flags to IPv6 routing daemon. 486#route6d_flags="-l" # Example for route6d with only IPv6 site local 487 # addrs. 488#route6d_flags="-q" # If you want to run a routing daemon on an end 489 # node, you should stop advertisement. 490#ipv6_network_interfaces="ed0 ep0" # Examples for router 491 # or static configuration for end node. 492 # Choose correct prefix value. 493#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 494#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 495ipv6_default_interface="NO" # Default output interface for scoped addrs. 496 # This works only with 497 # ipv6_gateway_enable="NO". 498rtsol_flags="" # Flags to IPv6 router solicitation. 499rtsold_enable="NO" # Set to YES to enable an IPv6 router 500 # solicitation daemon. 501rtsold_flags="-a" # Flags to an IPv6 router solicitation 502 # daemon. 503rtadvd_enable="NO" # Set to YES to enable an IPv6 router 504 # advertisement daemon. If set to YES, 505 # this router becomes a possible candidate 506 # IPv6 default router for local subnets. 507rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 508mroute6d_enable="NO" # Do IPv6 multicast routing. 509mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 510 # routing daemon. You need to 511 # install it from package or 512 # port. 513mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 514stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 515 # tunneling interface. Specify this entry 516 # to enable 6to4 interface. 517stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 518 # to limit peer addr range. Effective value 519 # is 0-31. 520stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 521 # If you like, you can set "AUTO" for this. 522stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 523ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 524 # IPv6-to-IPv4 TCP translator. You also need 525 # faithd(8) setup. 526ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 527 # communication. (like ::ffff:a.b.c.d) 528ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 529 # see /usr/src/contrib/ipfilter/rules 530 # for examples 531ip6addrctl_enable="YES" # Set to YES to enable default address selection 532ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 533ip6addrctl_policy="AUTO" # A pre-defined address selection policy 534 # (ipv4_prefer, ipv6_prefer, or AUTO) 535 536############################################################## 537### System console options ################################# 538############################################################## 539 540keyboard="" # keyboard device to use (default /dev/kbd0). 541keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 542keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 543keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 544keychange="NO" # function keys default values (or NO). 545cursor="NO" # cursor type {normal|blink|destructive} (or NO). 546scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 547font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 548font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 549font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 550blanktime="300" # blank time (in seconds) or "NO" to turn it off. 551saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 552moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 553 # specifically overriden in rc.conf(5). 554moused_enable="NO" # Run the mouse daemon. 555moused_type="auto" # See man page for rc.conf(5) for available settings. 556moused_port="/dev/psm0" # Set to your mouse port. 557moused_flags="" # Any additional flags to moused. 558mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 559 # language code table, specify alternative range 560 # start like mousechar_start=3, see vidcontrol(1) 561allscreens_flags="" # Set this vidcontrol mode for all virtual screens 562allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 563 564############################################################## 565### Mail Transfer Agent (MTA) options ###################### 566############################################################## 567 568mta_start_script="/etc/rc.sendmail" 569 # Script to start your chosen MTA, called by /etc/rc. 570# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 571sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 572sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 573sendmail_procname="/usr/sbin/sendmail" # sendmail process name 574sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 575sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 576sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 577 # Flags for localhost-only MTA 578sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 579sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 580sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 581sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 582 # Flags for sendmail_msp_queue daemon. 583sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 584 585 586############################################################## 587### Miscellaneous administrative options ################### 588############################################################## 589 590auditd_enable="NO" # Run the audit daemon. 591auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 592auditd_flags="" # Which options to pass to the audit daemon. 593cron_enable="YES" # Run the periodic job daemon. 594cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 595cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 596cron_flags="" # Which options to pass to the cron daemon. 597lpd_enable="NO" # Run the line printer daemon. 598lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 599lpd_flags="" # Flags to lpd (if enabled). 600nscd_enable="NO" # Run the nsswitch caching daemon. 601chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 602chkprintcap_flags="-d" # Create missing directories by default. 603dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 604dumpdir="/var/crash" # Directory where crash dumps are to be stored 605savecore_flags="" # Used if dumpdev is enabled above, and present. 606crashinfo_enable="YES" # Automatically generate crash dump summary. 607crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 608quota_enable="NO" # turn on quotas on startup (or NO). 609check_quotas="YES" # Check quotas on startup (or NO). 610quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 611quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 612quotacheck_flags="-a" # Check all file system quotas (if enabled) 613accounting_enable="NO" # Turn on process accounting (or NO). 614ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 615ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 616 617# Emulation/compatibility services provided by /etc/rc.d/abi 618sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 619linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 620svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 621clear_tmp_enable="NO" # Clear /tmp at startup. 622clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 623ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 624ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 625 # shared library search paths 626ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 627ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 628 # a.out shared library search paths 629ldconfig_local_dirs="/usr/local/libdata/ldconfig" 630 # Local directories with ldconfig configuration files. 631ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 632 # Local directories with 32-bit compatibility ldconfig 633 # configuration files. 634kern_securelevel_enable="NO" # kernel security level (see security(7)) 635kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 636 # Note that setting securelevel to 0 will result 637 # in the system booting with securelevel set to 1, as 638 # init(8) will raise the level when rc(8) completes. 639update_motd="YES" # update version info in /etc/motd (or NO) 640entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 641 # /var/db/entropy-file is preferred if / is not avail. 642entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 643entropy_save_sz="2048" # Size of the entropy cache files. 644entropy_save_num="8" # Number of entropy cache files to save. 645harvest_interrupt="YES" # Entropy device harvests interrupt randomness 646harvest_ethernet="YES" # Entropy device harvests ethernet randomness 647harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 648dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 649watchdogd_enable="NO" # Start the software watchdog daemon 650watchdogd_flags="" # Flags to watchdogd (if enabled) 651devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 652 # devfs(8) rules. 653devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 654devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 655 # apply (must be mounted already, i.e. fstab(5)) 656devfs_load_rulesets="NO" # Enable to always load the default rulesets 657performance_cx_lowest="HIGH" # Online CPU idle state 658performance_cpu_freq="NONE" # Online CPU frequency 659economy_cx_lowest="HIGH" # Offline CPU idle state 660economy_cpu_freq="NONE" # Offline CPU frequency 661virecover_enable="YES" # Perform housekeeping for the vi(1) editor 662ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 663bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 664 # ruleset file. 665newsyslog_enable="YES" # Run newsyslog at startup. 666newsyslog_flags="-CN" # Newsyslog flags to create marked files 667mixer_enable="YES" # Run the sound mixer. 668opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 669 670############################################################## 671### Jail Configuration ####################################### 672############################################################## 673jail_enable="NO" # Set to NO to disable starting of any jails 674jail_parallel_start="NO" # Start jails in the background 675jail_list="" # Space separated list of names of jails 676jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 677jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 678jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 679 680# 681# To use rc's built-in jail infrastructure create entries for 682# each jail, specified in jail_list, with the following variables. 683# NOTES: 684# - replace 'example' with the jail's name. 685# - except rootdir, hostname, ip and the _multi<n> addresses, 686# all of the following variables may be made global jail variables 687# if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset). 688# 689#jail_example_rootdir="/usr/jail/default" # Jail's root directory 690#jail_example_hostname="default.domain.com" # Jail's hostname 691#jail_example_interface="" # Jail's interface variable to create IP aliases on 692#jail_example_fib="0" # Routing table for setfib(1) 693#jail_example_ip="192.0.2.10,2001:db8::17" # Jail's primary IPv4 and IPv6 address 694#jail_example_ip_multi0="2001:db8::10" # and another IPv6 address 695#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 696#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 697 # starting the jail. More than one can be 698 # specified using a trailing number 699#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 700#jail_example_devfs_enable="NO" # mount devfs in the jail 701#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail - 702 # usually you want "devfsrules_jail". 703#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 704#jail_example_procfs_enable="NO" # mount procfs in jail 705#jail_example_mount_enable="NO" # mount/umount jail's fs 706#jail_example_fstab="" # fstab(5) for mount/umount 707#jail_example_flags="-l -U root" # flags for jail(8) 708 709############################################################## 710### Define source_rc_confs, the mechanism used by /etc/rc.* ## 711### scripts to source rc_conf_files overrides safely. ## 712############################################################## 713 714if [ -z "${source_rc_confs_defined}" ]; then 715 source_rc_confs_defined=yes 716 source_rc_confs() { 717 local i sourced_files 718 for i in ${rc_conf_files}; do 719 case ${sourced_files} in 720 *:$i:*) 721 ;; 722 *) 723 sourced_files="${sourced_files}:$i:" 724 if [ -r $i ]; then 725 . $i 726 fi 727 ;; 728 esac 729 done 730 } 731fi 732