rc.conf revision 188710
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 188710 2009-02-17 11:55:50Z mtm $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEMS" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36ddb_enable="NO" # Set to YES to load ddb scripts at boot. 37ddb_config="/etc/ddb.conf" # ddb(8) config file. 38devd_enable="YES" # Run devd, to trigger programs on device tree changes. 39devd_flags="" # Additional flags for devd(8). 40kldxref_enable="NO" # Build linker.hints files with kldxref(8). 41kldxref_clobber="NO" # Overwrite old linker.hints at boot. 42kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 43powerd_enable="NO" # Run powerd to lower our power usage. 44powerd_flags="" # Flags to powerd (if enabled). 45tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 46tmpsize="20m" # Size of mfs /tmp if created 47tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 48varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 49varsize="32m" # Size of mfs /var if created 50varmfs_flags="-S" # Extra mount options for the mfs /var 51populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 52cleanvar_enable="YES" # Clean the /var directory 53local_startup="/usr/local/etc/rc.d" # startup script dirs. 54script_name_sep=" " # Change if your startup scripts' names contain spaces 55rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 56 57# ZFS support 58zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 59 60# Experimental - test before enabling 61gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 62gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 63gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 64gbde_lockdir="/etc" # Where to look for gbde lockfiles 65 66# GELI disk encryption configuration. 67geli_devices="" # List of devices to automatically attach in addition to 68 # GELI devices listed in /etc/fstab. 69geli_tries="" # Number of times to attempt attaching geli device. 70 # If empty, kern.geom.eli.tries will be used. 71geli_default_flags="" # Default flags for geli(8). 72geli_autodetach="YES" # Automatically detach on last close. 73 # Providers are marked as such when all file systems are 74 # mounted. 75# Example use. 76#geli_devices="da1 mirror/home" 77#geli_da1_flags="-p -k /etc/geli/da1.keys" 78#geli_da1_autodetach="NO" 79#geli_mirror_home_flags="-k /etc/geli/home.keys" 80 81geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 82 # swap partitions. 83 84root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 85fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 86background_fsck="YES" # Attempt to run fsck in the background where possible. 87background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 88netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 89extra_netfs_types="NO" # List of network extra filesystem types for delayed 90 # mount at startup (or NO). 91 92############################################################## 93### Network configuration sub-section ###################### 94############################################################## 95 96### Basic network and firewall/security options: ### 97hostname="" # Set this! 98hostid_enable="YES" # Set host UUID. 99hostid_file="/etc/hostid" # File with hostuuid. 100nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 101dhclient_program="/sbin/dhclient" # Path to dhcp client program. 102dhclient_flags="" # Extra flags to pass to dhcp client. 103#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 104background_dhclient="YES" # Start dhcp client in the background. 105#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 106synchronous_dhclient="NO" # Start dhclient directly on configured 107 # interfaces during startup. 108defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 109wpa_supplicant_program="/usr/sbin/wpa_supplicant" 110wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 111wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 112# 113firewall_enable="NO" # Set to YES to enable firewall functionality 114firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 115firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 116firewall_quiet="NO" # Set to YES to suppress rule display 117firewall_logging="NO" # Set to YES to enable events logging 118firewall_flags="" # Flags passed to ipfw when type is a file 119firewall_client_net="192.0.2.0/24" # Network address for "client" firewall. 120firewall_simple_iif="ed1" # Inside network interface for "simple" 121 # firewall. 122firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 123 # firewall. 124firewall_simple_oif="ed0" # Outside network interface for "simple" 125 # firewall. 126firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 127 # firewall. 128firewall_myservices="" # List of TCP ports on which this host 129 # offers services for "workstation" firewall. 130firewall_allowservices="" # List of IPs which have access to 131 # $firewall_myservices for "workstation" 132 # firewall. 133firewall_trusted="" # List of IPs which have full access to this 134 # host for "workstation" firewall. 135firewall_logdeny="NO" # Set to YES to log default denied incoming 136 # packets for "workstation" firewall. 137firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 138 # for which denied incoming packets are not 139 # logged for "workstation" firewall. 140firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 141firewall_nat_interface="" # Public interface or IPaddress to use 142firewall_nat_flags="" # Additional configuration parameters 143dummynet_enable="NO" # Load the dummynet(4) module 144ip_portrange_first="NO" # Set first dynamically allocated port 145ip_portrange_last="NO" # Set last dynamically allocated port 146ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 147ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 148ike_flags="" # Additional flags for IKE daemon 149ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 150ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 151natd_program="/sbin/natd" # path to natd, if you want a different one. 152natd_enable="NO" # Enable natd (if firewall_enable == YES). 153natd_interface="" # Public interface or IPaddress to use. 154natd_flags="" # Additional flags for natd. 155ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 156ipfilter_program="/sbin/ipf" # where the ipfilter program lives 157ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 158 # /usr/src/contrib/ipfilter/rules for examples 159ipfilter_flags="" # additional flags for ipfilter 160ipnat_enable="NO" # Set to YES to enable ipnat functionality 161ipnat_program="/sbin/ipnat" # where the ipnat program lives 162ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 163ipnat_flags="" # additional flags for ipnat 164ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 165ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 166ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 167ipfs_enable="NO" # Set to YES to enable saving and restoring 168 # of state tables at shutdown and boot 169ipfs_program="/sbin/ipfs" # where the ipfs program lives 170ipfs_flags="" # additional flags for ipfs 171pf_enable="NO" # Set to YES to enable packet filter (pf) 172pf_rules="/etc/pf.conf" # rules definition file for pf 173pf_program="/sbin/pfctl" # where the pfctl program lives 174pf_flags="" # additional flags for pfctl 175pflog_enable="NO" # Set to YES to enable packet filter logging 176pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 177pflog_program="/sbin/pflogd" # where the pflogd program lives 178pflog_flags="" # additional flags for pflogd 179ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 180ftpproxy_flags="" # additional flags for ftp-proxy(8) 181pfsync_enable="NO" # Expose pf state to other hosts for syncing 182pfsync_syncdev="" # Interface for pfsync to work through 183pfsync_syncpeer="" # IP address of pfsync peer host 184pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 185tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 186log_in_vain="0" # >=1 to log connects to ports w/o listeners. 187tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 188tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 189 # NOTE: this violates the TCP specification 190icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 191icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 192network_interfaces="auto" # List of network interfaces (or "auto"). 193cloned_interfaces="" # List of cloned network interfaces to create. 194#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 195ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 196#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 197#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 198#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 199#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 200#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 201# 202#autobridge_interfaces="bridge0" # List of bridges to check 203#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 204# 205# If you have any sppp(4) interfaces above, you might also want to set 206# the following parameters. Refer to spppcontrol(8) for their meaning. 207sppp_interfaces="" # List of sppp interfaces. 208#sppp_interfaces="...0" # example: sppp over ... 209#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 210gif_interfaces="" # List of GIF tunnels. 211#gif_interfaces="gif0 gif1" # Examples typically for a router. 212 # Choose correct tunnel addrs. 213#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 214#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 215fec_interfaces="" # List of Fast EtherChannels. 216#fec_interfaces="fec0 fec1" 217#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 218#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 219 220# User ppp configuration. 221ppp_enable="NO" # Start user-ppp (or NO). 222ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 223ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 224 # For details see man page for ppp(8). Default is auto. 225ppp_nat="YES" # Use PPP's internal network address translation or NO. 226ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 227ppp_user="root" # Which user to run ppp as 228 229# Start multiple instances of ppp at boot time 230#ppp_profile="profile1 profile2 profile3" # Which profiles to use 231#ppp_profile1_mode="ddial" # Override ppp mode for profile1 232#ppp_profile2_nat="NO" # Override nat mode for profile2 233# profile3 uses default ppp_mode and ppp_nat 234 235### Network daemon (miscellaneous) ### 236hostapd_enable="NO" # Run hostap daemon. 237syslogd_enable="YES" # Run syslog daemon (or NO). 238syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 239syslogd_flags="-s" # Flags to syslogd (if enabled). 240inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 241inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 242inetd_flags="-wW -C 60" # Optional flags to inetd 243# 244# named. It may be possible to run named in a sandbox, man security for 245# details. 246# 247named_enable="NO" # Run named, the DNS server (or NO). 248named_program="/usr/sbin/named" # Path to named, if you want a different one. 249#named_flags="-c /etc/namedb/named.conf" # Uncomment for named not in /usr/sbin 250named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 251named_uid="bind" # User to run named as 252named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 253named_chroot_autoupdate="YES" # Automatically install/update chrooted 254 # components of named. See /etc/rc.d/named. 255named_symlink_enable="YES" # Symlink the chrooted pid file 256 257# 258# kerberos. Do not run the admin daemons on slave servers 259# 260kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 261kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 262kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server 263kadmind5_server_enable="NO" # Run kadmind (or NO) 264kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 265kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 266kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 267 268gssd_enable="NO" # Run the gssd daemon (or NO). 269gssd_flags="" # Flags for gssd. 270 271rwhod_enable="NO" # Run the rwho daemon (or NO). 272rwhod_flags="" # Flags for rwhod 273rarpd_enable="NO" # Run rarpd (or NO). 274rarpd_flags="-a" # Flags to rarpd. 275bootparamd_enable="NO" # Run bootparamd (or NO). 276bootparamd_flags="" # Flags to bootparamd 277pppoed_enable="NO" # Run the PPP over Ethernet daemon. 278pppoed_provider="*" # Provider and ppp(8) config file entry. 279pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 280pppoed_interface="fxp0" # The interface that pppoed runs on. 281sshd_enable="NO" # Enable sshd 282sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 283sshd_flags="" # Additional flags for sshd. 284ftpd_enable="NO" # Enable stand-alone ftpd. 285ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 286ftpd_flags="" # Additional flags to stand-alone ftpd. 287 288### Network daemon (NFS): All need rpcbind_enable="YES" ### 289amd_enable="NO" # Run amd service with $amd_flags (or NO). 290amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 291amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 292amd_map_program="NO" # Can be set to "ypcat -k amd.master" 293nfs_client_enable="NO" # This host is an NFS client (or NO). 294nfs_access_cache="60" # Client cache timeout in seconds 295nfs_server_enable="NO" # This host is an NFS server (or NO). 296nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 297idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 298idmapd_flags="" # Additional flags for idmapd. 299mountd_enable="NO" # Run mountd (or NO). 300mountd_flags="-r" # Flags to mountd (if NFS server enabled). 301weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 302nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 303nfs_bufpackets="" # bufspace (in packets) for client 304rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 305rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 306rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 307rpc_statd_flags="" # Flags to rpc.statd (if enabled). 308rpcbind_enable="NO" # Run the portmapper service (YES/NO). 309rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 310rpcbind_flags="" # Flags to rpcbind (if enabled). 311rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 312keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 313keyserv_flags="" # Flags to keyserv (if enabled). 314 315### Network Time Services options: ### 316timed_enable="NO" # Run the time daemon (or NO). 317timed_flags="" # Flags to timed (if enabled). 318ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 319ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 320ntpdate_flags="-b" # Flags to ntpdate (if enabled). 321ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 322ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 323ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 324ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 325ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 326ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 327ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 328 # Flags to ntpd (if enabled). 329 330# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 331nis_client_enable="NO" # We're an NIS client (or NO). 332nis_client_flags="" # Flags to ypbind (if enabled). 333nis_ypset_enable="NO" # Run ypset at boot time (or NO). 334nis_ypset_flags="" # Flags to ypset (if enabled). 335nis_server_enable="NO" # We're an NIS server (or NO). 336nis_server_flags="" # Flags to ypserv (if enabled). 337nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 338nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 339nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 340nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 341 342### SNMP daemon ### 343# Be sure to understand the security implications of running SNMP v1/v2 344# in your network. 345bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 346bsnmpd_flags="" # Flags for bsnmpd. 347 348### Network routing options: ### 349defaultrouter="NO" # Set to default gateway (or NO). 350static_routes="" # Set to static route list (or leave empty). 351natm_static_routes="" # Set to static route list for NATM (or leave empty). 352gateway_enable="NO" # Set to YES if this host will be a gateway. 353router_enable="NO" # Set to YES to enable a routing daemon. 354router="/sbin/routed" # Name of routing daemon to use if enabled. 355router_flags="-q" # Flags for routing daemon. 356mrouted_enable="NO" # Do IPv4 multicast routing. 357mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 358 # routing daemon. You need to 359 # install it from package or 360 # port. 361mrouted_flags="" # Flags for multicast routing daemon. 362ipxgateway_enable="NO" # Set to YES to enable IPX routing. 363ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 364ipxrouted_flags="" # Flags for IPX routing daemon. 365arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 366forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 367accept_sourceroute="NO" # accept source routed packets to us 368 369### ATM interface options: ### 370atm_enable="NO" # Configure ATM interfaces (or NO). 371#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 372#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 373#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 374#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 375#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 376#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 377atm_pvcs="" # Set to PVC list (or leave empty). 378atm_arps="" # Set to permanent ARP list (or leave empty). 379 380### Bluetooth ### 381hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 382hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 383 384sdpd_enable="NO" # Enable sdpd(8) (or NO) 385sdpd_control="/var/run/sdp" # sdpd(8) control socket 386sdpd_groupname="nobody" # set spdp(8) user/group to run as after 387sdpd_username="nobody" # it initializes 388 389bthidd_enable="NO" # Enable bthidd(8) (or NO) 390bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 391bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 392 393rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 394rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 395# 396#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 397rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 398#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 399#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 400# 401#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 402rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 403#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 404#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 405 406### Miscellaneous network options: ### 407icmp_bmcastecho="NO" # respond to broadcast ping packets 408 409### IPv6 options: ### 410ipv6_enable="NO" # Set to YES to set up for IPv6. 411ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 412ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 413#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 414ipv6_static_routes="" # Set to static route list (or leave empty). 415#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 416 # route toward loopback interface. 417#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 418ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 419ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 420ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 421ipv6_router_flags="" # Flags to IPv6 routing daemon. 422#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 423 # addrs. 424#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 425 # node, you should stop advertisement. 426#ipv6_network_interfaces="ed0 ep0" # Examples for router 427 # or static configuration for end node. 428 # Choose correct prefix value. 429#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 430#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 431#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 432#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 433ipv6_default_interface="NO" # Default output interface for scoped addrs. 434 # Now this works only for IPv6 link local 435 # multicast addrs. 436rtsol_flags="" # Flags to IPv6 router solicitation. 437rtadvd_enable="NO" # Set to YES to enable an IPv6 router 438 # advertisement daemon. If set to YES, 439 # this router becomes a possible candidate 440 # IPv6 default router for local subnets. 441rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 442mroute6d_enable="NO" # Do IPv6 multicast routing. 443mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 444 # routing daemon. You need to 445 # install it from package or 446 # port. 447mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 448stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 449 # tunneling interface. Specify this entry 450 # to enable 6to4 interface. 451stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 452 # to limit peer addr range. Effective value 453 # is 0-31. 454stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 455 # If you like, you can set "AUTO" for this. 456stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 457ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 458 # IPv6-to-IPv4 TCP translator. You also need 459 # faithd(8) setup. 460ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 461 # communication. (like ::ffff:a.b.c.d) 462ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 463 # functionality 464ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 465ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 466ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 467ipv6_firewall_logging="NO" # Set to YES to enable events logging 468ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 469ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 470 # see /usr/src/contrib/ipfilter/rules 471 # for examples 472ip6addrctl_enable="YES" # Set to YES to enable default address selection 473ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 474 475############################################################## 476### System console options ################################# 477############################################################## 478 479keyboard="" # keyboard device to use (default /dev/kbd0). 480keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 481keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 482keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 483keychange="NO" # function keys default values (or NO). 484cursor="NO" # cursor type {normal|blink|destructive} (or NO). 485scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 486font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 487font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 488font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 489blanktime="300" # blank time (in seconds) or "NO" to turn it off. 490saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 491moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 492 # specifically overriden in rc.conf(5). 493moused_enable="NO" # Run the mouse daemon. 494moused_type="auto" # See man page for rc.conf(5) for available settings. 495moused_port="/dev/psm0" # Set to your mouse port. 496moused_flags="" # Any additional flags to moused. 497mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 498 # language code table, specify alternative range 499 # start like mousechar_start=3, see vidcontrol(1) 500allscreens_flags="" # Set this vidcontrol mode for all virtual screens 501allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 502 503############################################################## 504### Mail Transfer Agent (MTA) options ###################### 505############################################################## 506 507mta_start_script="/etc/rc.sendmail" 508 # Script to start your chosen MTA, called by /etc/rc. 509# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 510sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 511sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 512sendmail_procname="/usr/sbin/sendmail" # sendmail process name 513sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 514sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 515sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 516 # Flags for localhost-only MTA 517sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 518sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 519sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 520sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 521 # Flags for sendmail_msp_queue daemon. 522sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 523 524 525############################################################## 526### Miscellaneous administrative options ################### 527############################################################## 528 529auditd_enable="NO" # Run the audit daemon. 530auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 531auditd_flags="" # Which options to pass to the audit daemon. 532cron_enable="YES" # Run the periodic job daemon. 533cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 534cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 535cron_flags="" # Which options to pass to the cron daemon. 536lpd_enable="NO" # Run the line printer daemon. 537lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 538lpd_flags="" # Flags to lpd (if enabled). 539nscd_enable="NO" # Run the nsswitch caching daemon. 540chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 541chkprintcap_flags="-d" # Create missing directories by default. 542dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 543dumpdir="/var/crash" # Directory where crash dumps are to be stored 544savecore_flags="" # Used if dumpdev is enabled above, and present. 545crashinfo_enable="NO" # Automatically generate crash dump summary. 546crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 547quota_enable="NO" # turn on quotas on startup (or NO). 548check_quotas="YES" # Check quotas on startup (or NO). 549quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 550quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 551quotacheck_flags="-a" # Check all file system quotas (if enabled) 552accounting_enable="NO" # Turn on process accounting (or NO). 553ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 554ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 555 556# Emulation/compatibility services provided by /etc/rc.d/abi 557sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 558linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 559svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 560clear_tmp_enable="NO" # Clear /tmp at startup. 561clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 562ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 563ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 564 # shared library search paths 565ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 566ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 567 # a.out shared library search paths 568ldconfig_local_dirs="/usr/local/libdata/ldconfig" 569 # Local directories with ldconfig configuration files. 570ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 571 # Local directories with 32-bit compatibility ldconfig 572 # configuration files. 573kern_securelevel_enable="NO" # kernel security level (see security(7)) 574kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 575 # Note that setting securelevel to 0 will result 576 # in the system booting with securelevel set to 1, as 577 # init(8) will raise the level when rc(8) completes. 578update_motd="YES" # update version info in /etc/motd (or NO) 579entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 580 # /var/db/entropy-file is preferred if / is not avail. 581entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 582entropy_save_sz="2048" # Size of the entropy cache files. 583entropy_save_num="8" # Number of entropy cache files to save. 584harvest_interrupt="YES" # Entropy device harvests interrupt randomness 585harvest_ethernet="YES" # Entropy device harvests ethernet randomness 586harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 587dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 588watchdogd_enable="NO" # Start the software watchdog daemon 589devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 590 # devfs(8) rules. 591devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 592devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 593 # apply (must be mounted already, i.e. fstab(5)) 594performance_cx_lowest="HIGH" # Online CPU idle state 595performance_cpu_freq="NONE" # Online CPU frequency 596economy_cx_lowest="HIGH" # Offline CPU idle state 597economy_cpu_freq="NONE" # Offline CPU frequency 598virecover_enable="YES" # Perform housekeeping for the vi(1) editor 599ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 600bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 601 # ruleset file. 602newsyslog_enable="YES" # Run newsyslog at startup. 603newsyslog_flags="-CN" # Newsyslog flags to create marked files 604mixer_enable="YES" # Run the sound mixer. 605 606############################################################## 607### Jail Configuration ####################################### 608############################################################## 609jail_enable="NO" # Set to NO to disable starting of any jails 610jail_list="" # Space separated list of names of jails 611jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 612jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 613jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 614 615# 616# To use rc's built-in jail infrastructure create entries for 617# each jail, specified in jail_list, with the following variables. 618# NOTES: 619# - replace 'example' with the jail's name. 620# - except rootdir, hostname, ip and the _multi<n> addresses, 621# all of the following variables may be made global jail variables 622# if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset). 623# 624#jail_example_rootdir="/usr/jail/default" # Jail's root directory 625#jail_example_hostname="default.domain.com" # Jail's hostname 626#jail_example_interface="" # Jail's interface variable to create IP aliases on 627#jail_example_fib="0" # Routing table for setfib(1) 628#jail_example_ip="192.0.2.10,2001:db8::17" # Jail's primary IPv4 and IPv6 address 629#jail_example_ip_multi0="2001:db8::10" # and another IPv6 address 630#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 631#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 632 # starting the jail. More than one can be 633 # specified using a trailing number 634#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 635#jail_example_devfs_enable="NO" # mount devfs in the jail 636#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail - 637 # usually you want "devfsrules_jail". 638#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 639#jail_example_procfs_enable="NO" # mount procfs in jail 640#jail_example_mount_enable="NO" # mount/umount jail's fs 641#jail_example_fstab="" # fstab(5) for mount/umount 642#jail_example_flags="-l -U root" # flags for jail(8) 643 644############################################################## 645### Define source_rc_confs, the mechanism used by /etc/rc.* ## 646### scripts to source rc_conf_files overrides safely. ## 647############################################################## 648 649if [ -z "${source_rc_confs_defined}" ]; then 650 source_rc_confs_defined=yes 651 source_rc_confs () { 652 local i sourced_files 653 for i in ${rc_conf_files}; do 654 case ${sourced_files} in 655 *:$i:*) 656 ;; 657 *) 658 sourced_files="${sourced_files}:$i:" 659 if [ -r $i ]; then 660 . $i 661 fi 662 ;; 663 esac 664 done 665 } 666fi 667