rc.conf revision 182164
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 182164 2008-08-25 16:31:53Z des $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEMS" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36ddb_enable="NO" # Set to YES to load ddb scripts at boot. 37ddb_config="/etc/ddb.conf" # ddb(8) config file. 38devd_enable="YES" # Run devd, to trigger programs on device tree changes. 39devd_flags="" # Additional flags for devd(8). 40kldxref_enable="NO" # Build linker.hints files with kldxref(8). 41kldxref_clobber="NO" # Overwrite old linker.hints at boot. 42kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 43powerd_enable="NO" # Run powerd to lower our power usage. 44powerd_flags="" # Flags to powerd (if enabled). 45tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 46tmpsize="20m" # Size of mfs /tmp if created 47tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 48varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 49varsize="32m" # Size of mfs /var if created 50varmfs_flags="-S" # Extra mount options for the mfs /var 51populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 52cleanvar_enable="YES" # Clean the /var directory 53local_startup="/usr/local/etc/rc.d" # startup script dirs. 54script_name_sep=" " # Change if your startup scripts' names contain spaces 55rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 56 57# ZFS support 58zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 59 60# Experimental - test before enabling 61gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 62gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 63gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 64gbde_lockdir="/etc" # Where to look for gbde lockfiles 65 66# GELI disk encryption configuration. 67geli_devices="" # List of devices to automatically attach in addition to 68 # GELI devices listed in /etc/fstab. 69geli_tries="" # Number of times to attempt attaching geli device. 70 # If empty, kern.geom.eli.tries will be used. 71geli_default_flags="" # Default flags for geli(8). 72geli_autodetach="YES" # Automatically detach on last close. 73 # Providers are marked as such when all file systems are 74 # mounted. 75# Example use. 76#geli_devices="da1 mirror/home" 77#geli_da1_flags="-p -k /etc/geli/da1.keys" 78#geli_da1_autodetach="NO" 79#geli_mirror_home_flags="-k /etc/geli/home.keys" 80 81geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 82 # swap partitions. 83 84root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 85fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 86background_fsck="YES" # Attempt to run fsck in the background where possible. 87background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 88netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 89extra_netfs_types="NO" # List of network extra filesystem types for delayed 90 # mount at startup (or NO). 91 92############################################################## 93### Network configuration sub-section ###################### 94############################################################## 95 96### Basic network and firewall/security options: ### 97hostname="" # Set this! 98hostid_enable="YES" # Set host UUID. 99hostid_file="/etc/hostid" # File with hostuuid. 100nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 101dhclient_program="/sbin/dhclient" # Path to dhcp client program. 102dhclient_flags="" # Extra flags to pass to dhcp client. 103#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 104background_dhclient="NO" # Start dhcp client in the background. 105#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 106synchronous_dhclient="NO" # Start dhclient directly on configured 107 # interfaces during startup. 108wpa_supplicant_program="/usr/sbin/wpa_supplicant" 109wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 110wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 111# 112firewall_enable="NO" # Set to YES to enable firewall functionality 113firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 114firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 115firewall_quiet="NO" # Set to YES to suppress rule display 116firewall_logging="NO" # Set to YES to enable events logging 117firewall_flags="" # Flags passed to ipfw when type is a file 118firewall_client_net="192.0.2.0/24" # Network address for "client" firewall. 119firewall_simple_iif="ed1" # Inside network interface for "simple" 120 # firewall. 121firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 122 # firewall. 123firewall_simple_oif="ed0" # Outside network interface for "simple" 124 # firewall. 125firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 126 # firewall. 127firewall_myservices="" # List of TCP ports on which this host 128 # offers services for "workstation" firewall. 129firewall_allowservices="" # List of IPs which have access to 130 # $firewall_myservices for "workstation" 131 # firewall. 132firewall_trusted="" # List of IPs which have full access to this 133 # host for "workstation" firewall. 134firewall_logdeny="NO" # Set to YES to log default denied incoming 135 # packets for "workstation" firewall. 136firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 137 # for which denied incoming packets are not 138 # logged for "workstation" firewall. 139firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 140firewall_nat_interface="" # Public interface or IPaddress to use 141firewall_nat_flags="" # Additional configuration parameters 142dummynet_enable="NO" # Load the dummynet(4) module 143ip_portrange_first="NO" # Set first dynamically allocated port 144ip_portrange_last="NO" # Set last dynamically allocated port 145ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 146ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 147ike_flags="" # Additional flags for IKE daemon 148ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 149ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 150natd_program="/sbin/natd" # path to natd, if you want a different one. 151natd_enable="NO" # Enable natd (if firewall_enable == YES). 152natd_interface="" # Public interface or IPaddress to use. 153natd_flags="" # Additional flags for natd. 154ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 155ipfilter_program="/sbin/ipf" # where the ipfilter program lives 156ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 157 # /usr/src/contrib/ipfilter/rules for examples 158ipfilter_flags="" # additional flags for ipfilter 159ipnat_enable="NO" # Set to YES to enable ipnat functionality 160ipnat_program="/sbin/ipnat" # where the ipnat program lives 161ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 162ipnat_flags="" # additional flags for ipnat 163ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 164ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 165ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 166ipfs_enable="NO" # Set to YES to enable saving and restoring 167 # of state tables at shutdown and boot 168ipfs_program="/sbin/ipfs" # where the ipfs program lives 169ipfs_flags="" # additional flags for ipfs 170pf_enable="NO" # Set to YES to enable packet filter (pf) 171pf_rules="/etc/pf.conf" # rules definition file for pf 172pf_program="/sbin/pfctl" # where the pfctl program lives 173pf_flags="" # additional flags for pfctl 174pflog_enable="NO" # Set to YES to enable packet filter logging 175pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 176pflog_program="/sbin/pflogd" # where the pflogd program lives 177pflog_flags="" # additional flags for pflogd 178ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 179ftpproxy_flags="" # additional flags for ftp-proxy(8) 180pfsync_enable="NO" # Expose pf state to other hosts for syncing 181pfsync_syncdev="" # Interface for pfsync to work through 182pfsync_syncpeer="" # IP address of pfsync peer host 183pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 184tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 185log_in_vain="0" # >=1 to log connects to ports w/o listeners. 186tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 187tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 188 # NOTE: this violates the TCP specification 189icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 190icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 191network_interfaces="auto" # List of network interfaces (or "auto"). 192if_up_delay="30" # Time to wait for interfaces to come up. 193cloned_interfaces="" # List of cloned network interfaces to create. 194#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 195ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 196#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 197#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 198#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 199#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 200#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 201# 202#autobridge_interfaces="bridge0" # List of bridges to check 203#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 204# 205# If you have any sppp(4) interfaces above, you might also want to set 206# the following parameters. Refer to spppcontrol(8) for their meaning. 207sppp_interfaces="" # List of sppp interfaces. 208#sppp_interfaces="...0" # example: sppp over ... 209#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 210gif_interfaces="" # List of GIF tunnels. 211#gif_interfaces="gif0 gif1" # Examples typically for a router. 212 # Choose correct tunnel addrs. 213#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 214#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 215fec_interfaces="" # List of Fast EtherChannels. 216#fec_interfaces="fec0 fec1" 217#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 218#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 219 220# User ppp configuration. 221ppp_enable="NO" # Start user-ppp (or NO). 222ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 223ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 224 # For details see man page for ppp(8). Default is auto. 225ppp_nat="YES" # Use PPP's internal network address translation or NO. 226ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 227ppp_user="root" # Which user to run ppp as 228 229# Start multiple instances of ppp at boot time 230#ppp_profile="profile1 profile2 profile3" # Which profiles to use 231#ppp_profile1_mode="ddial" # Override ppp mode for profile1 232#ppp_profile2_nat="NO" # Override nat mode for profile2 233# profile3 uses default ppp_mode and ppp_nat 234 235### Network daemon (miscellaneous) ### 236hostapd_enable="NO" # Run hostap daemon. 237syslogd_enable="YES" # Run syslog daemon (or NO). 238syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 239syslogd_flags="-s" # Flags to syslogd (if enabled). 240inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 241inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 242inetd_flags="-wW -C 60" # Optional flags to inetd 243# 244# named. It may be possible to run named in a sandbox, man security for 245# details. 246# 247named_enable="NO" # Run named, the DNS server (or NO). 248named_program="/usr/sbin/named" # Path to named, if you want a different one. 249#named_flags="-c /etc/namedb/named.conf" # Uncomment for named not in /usr/sbin 250named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 251named_uid="bind" # User to run named as 252named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 253named_chroot_autoupdate="YES" # Automatically install/update chrooted 254 # components of named. See /etc/rc.d/named. 255named_symlink_enable="YES" # Symlink the chrooted pid file 256 257# 258# kerberos. Do not run the admin daemons on slave servers 259# 260kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 261kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 262kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server 263kadmind5_server_enable="NO" # Run kadmind (or NO) 264kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 265kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 266kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 267 268rwhod_enable="NO" # Run the rwho daemon (or NO). 269rwhod_flags="" # Flags for rwhod 270rarpd_enable="NO" # Run rarpd (or NO). 271rarpd_flags="-a" # Flags to rarpd. 272bootparamd_enable="NO" # Run bootparamd (or NO). 273bootparamd_flags="" # Flags to bootparamd 274pppoed_enable="NO" # Run the PPP over Ethernet daemon. 275pppoed_provider="*" # Provider and ppp(8) config file entry. 276pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 277pppoed_interface="fxp0" # The interface that pppoed runs on. 278sshd_enable="NO" # Enable sshd 279sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 280sshd_flags="" # Additional flags for sshd. 281ftpd_enable="NO" # Enable stand-alone ftpd. 282ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 283ftpd_flags="" # Additional flags to stand-alone ftpd. 284 285### Network daemon (NFS): All need rpcbind_enable="YES" ### 286amd_enable="NO" # Run amd service with $amd_flags (or NO). 287amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 288amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 289amd_map_program="NO" # Can be set to "ypcat -k amd.master" 290nfs_client_enable="NO" # This host is an NFS client (or NO). 291nfs_access_cache="60" # Client cache timeout in seconds 292nfs_server_enable="NO" # This host is an NFS server (or NO). 293nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 294idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 295idmapd_flags="" # Additional flags for idmapd. 296mountd_enable="NO" # Run mountd (or NO). 297mountd_flags="-r" # Flags to mountd (if NFS server enabled). 298weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 299nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 300nfs_bufpackets="" # bufspace (in packets) for client 301rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 302rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 303rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 304rpc_statd_flags="" # Flags to rpc.statd (if enabled). 305rpcbind_enable="NO" # Run the portmapper service (YES/NO). 306rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 307rpcbind_flags="" # Flags to rpcbind (if enabled). 308rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 309keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 310keyserv_flags="" # Flags to keyserv (if enabled). 311 312### Network Time Services options: ### 313timed_enable="NO" # Run the time daemon (or NO). 314timed_flags="" # Flags to timed (if enabled). 315ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 316ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 317ntpdate_flags="-b" # Flags to ntpdate (if enabled). 318ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 319ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 320ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 321ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 322ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 323ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 324ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 325 # Flags to ntpd (if enabled). 326 327# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 328nis_client_enable="NO" # We're an NIS client (or NO). 329nis_client_flags="" # Flags to ypbind (if enabled). 330nis_ypset_enable="NO" # Run ypset at boot time (or NO). 331nis_ypset_flags="" # Flags to ypset (if enabled). 332nis_server_enable="NO" # We're an NIS server (or NO). 333nis_server_flags="" # Flags to ypserv (if enabled). 334nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 335nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 336nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 337nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 338 339### SNMP daemon ### 340# Be sure to understand the security implications of running SNMP v1/v2 341# in your network. 342bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 343bsnmpd_flags="" # Flags for bsnmpd. 344 345### Network routing options: ### 346defaultrouter="NO" # Set to default gateway (or NO). 347static_routes="" # Set to static route list (or leave empty). 348natm_static_routes="" # Set to static route list for NATM (or leave empty). 349gateway_enable="NO" # Set to YES if this host will be a gateway. 350router_enable="NO" # Set to YES to enable a routing daemon. 351router="/sbin/routed" # Name of routing daemon to use if enabled. 352router_flags="-q" # Flags for routing daemon. 353mrouted_enable="NO" # Do IPv4 multicast routing. 354mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 355 # routing daemon. You need to 356 # install it from package or 357 # port. 358mrouted_flags="" # Flags for multicast routing daemon. 359ipxgateway_enable="NO" # Set to YES to enable IPX routing. 360ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 361ipxrouted_flags="" # Flags for IPX routing daemon. 362arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 363forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 364accept_sourceroute="NO" # accept source routed packets to us 365 366### ATM interface options: ### 367atm_enable="NO" # Configure ATM interfaces (or NO). 368#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 369#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 370#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 371#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 372#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 373#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 374atm_pvcs="" # Set to PVC list (or leave empty). 375atm_arps="" # Set to permanent ARP list (or leave empty). 376 377### Bluetooth ### 378hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 379hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 380 381sdpd_enable="NO" # Enable sdpd(8) (or NO) 382sdpd_control="/var/run/sdp" # sdpd(8) control socket 383sdpd_groupname="nobody" # set spdp(8) user/group to run as after 384sdpd_username="nobody" # it initializes 385 386bthidd_enable="NO" # Enable bthidd(8) (or NO) 387bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 388bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 389 390rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 391rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 392# 393#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 394rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 395#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 396#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 397# 398#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 399rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 400#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 401#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 402 403### Miscellaneous network options: ### 404icmp_bmcastecho="NO" # respond to broadcast ping packets 405 406### IPv6 options: ### 407ipv6_enable="NO" # Set to YES to set up for IPv6. 408ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 409ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 410#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 411ipv6_static_routes="" # Set to static route list (or leave empty). 412#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 413 # route toward loopback interface. 414#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 415ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 416ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 417ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 418ipv6_router_flags="" # Flags to IPv6 routing daemon. 419#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 420 # addrs. 421#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 422 # node, you should stop advertisement. 423#ipv6_network_interfaces="ed0 ep0" # Examples for router 424 # or static configuration for end node. 425 # Choose correct prefix value. 426#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 427#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 428#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 429#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 430ipv6_default_interface="NO" # Default output interface for scoped addrs. 431 # Now this works only for IPv6 link local 432 # multicast addrs. 433rtsol_flags="" # Flags to IPv6 router solicitation. 434rtadvd_enable="NO" # Set to YES to enable an IPv6 router 435 # advertisement daemon. If set to YES, 436 # this router becomes a possible candidate 437 # IPv6 default router for local subnets. 438rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 439mroute6d_enable="NO" # Do IPv6 multicast routing. 440mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 441 # routing daemon. You need to 442 # install it from package or 443 # port. 444mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 445stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 446 # tunneling interface. Specify this entry 447 # to enable 6to4 interface. 448stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 449 # to limit peer addr range. Effective value 450 # is 0-31. 451stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 452 # If you like, you can set "AUTO" for this. 453stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 454ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 455 # IPv6-to-IPv4 TCP translator. You also need 456 # faithd(8) setup. 457ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 458 # communication. (like ::ffff:a.b.c.d) 459ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 460 # functionality 461ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 462ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 463ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 464ipv6_firewall_logging="NO" # Set to YES to enable events logging 465ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 466ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 467 # see /usr/src/contrib/ipfilter/rules 468 # for examples 469ip6addrctl_enable="YES" # Set to YES to enable default address selection 470ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 471 472############################################################## 473### System console options ################################# 474############################################################## 475 476keyboard="" # keyboard device to use (default /dev/kbd0). 477keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 478keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 479keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 480keychange="NO" # function keys default values (or NO). 481cursor="NO" # cursor type {normal|blink|destructive} (or NO). 482scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 483font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 484font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 485font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 486blanktime="300" # blank time (in seconds) or "NO" to turn it off. 487saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 488moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 489 # specifically overriden in rc.conf(5). 490moused_enable="NO" # Run the mouse daemon. 491moused_type="auto" # See man page for rc.conf(5) for available settings. 492moused_port="/dev/psm0" # Set to your mouse port. 493moused_flags="" # Any additional flags to moused. 494mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 495 # language code table, specify alternative range 496 # start like mousechar_start=3, see vidcontrol(1) 497allscreens_flags="" # Set this vidcontrol mode for all virtual screens 498allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 499 500############################################################## 501### Mail Transfer Agent (MTA) options ###################### 502############################################################## 503 504mta_start_script="/etc/rc.sendmail" 505 # Script to start your chosen MTA, called by /etc/rc. 506# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 507sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 508sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 509sendmail_procname="/usr/sbin/sendmail" # sendmail process name 510sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 511sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 512sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 513 # Flags for localhost-only MTA 514sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 515sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 516sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 517sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 518 # Flags for sendmail_msp_queue daemon. 519sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 520 521 522############################################################## 523### Miscellaneous administrative options ################### 524############################################################## 525 526auditd_enable="NO" # Run the audit daemon. 527auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 528auditd_flags="" # Which options to pass to the audit daemon. 529cron_enable="YES" # Run the periodic job daemon. 530cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 531cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 532cron_flags="" # Which options to pass to the cron daemon. 533lpd_enable="NO" # Run the line printer daemon. 534lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 535lpd_flags="" # Flags to lpd (if enabled). 536nscd_enable="NO" # Run the nsswitch caching daemon. 537chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 538chkprintcap_flags="-d" # Create missing directories by default. 539dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 540dumpdir="/var/crash" # Directory where crash dumps are to be stored 541savecore_flags="" # Used if dumpdev is enabled above, and present. 542quota_enable="NO" # turn on quotas on startup (or NO). 543check_quotas="YES" # Check quotas on startup (or NO). 544quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 545quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 546quotacheck_flags="-a" # Check all file system quotas (if enabled) 547accounting_enable="NO" # Turn on process accounting (or NO). 548ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 549ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 550 551# Emulation/compatibility services provided by /etc/rc.d/abi 552sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 553linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 554svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 555clear_tmp_enable="NO" # Clear /tmp at startup. 556clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 557ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 558ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 559 # shared library search paths 560ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 561ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 562 # a.out shared library search paths 563ldconfig_local_dirs="/usr/local/libdata/ldconfig" 564 # Local directories with ldconfig configuration files. 565ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 566 # Local directories with 32-bit compatibility ldconfig 567 # configuration files. 568kern_securelevel_enable="NO" # kernel security level (see init(8)), 569kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 570 # Note that setting securelevel to 0 will result 571 # in the system booting with securelevel set to 1, as 572 # init(8) will raise the level when rc(8) completes. 573update_motd="YES" # update version info in /etc/motd (or NO) 574entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 575 # /var/db/entropy-file is preferred if / is not avail. 576entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 577entropy_save_sz="2048" # Size of the entropy cache files. 578entropy_save_num="8" # Number of entropy cache files to save. 579harvest_interrupt="YES" # Entropy device harvests interrupt randomness 580harvest_ethernet="YES" # Entropy device harvests ethernet randomness 581harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 582dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 583watchdogd_enable="NO" # Start the software watchdog daemon 584devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 585 # devfs(8) rules. 586devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 587devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 588 # apply (must be mounted already, i.e. fstab(5)) 589performance_cx_lowest="HIGH" # Online CPU idle state 590performance_cpu_freq="NONE" # Online CPU frequency 591economy_cx_lowest="HIGH" # Offline CPU idle state 592economy_cpu_freq="NONE" # Offline CPU frequency 593virecover_enable="YES" # Perform housekeeping for the vi(1) editor 594ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 595bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 596 # ruleset file. 597newsyslog_enable="YES" # Run newsyslog at startup. 598newsyslog_flags="-CN" # Newsyslog flags to create marked files 599mixer_enable="YES" # Run the sound mixer. 600 601############################################################## 602### Jail Configuration ####################################### 603############################################################## 604jail_enable="NO" # Set to NO to disable starting of any jails 605jail_list="" # Space separated list of names of jails 606jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 607jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 608jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 609 610# 611# To use rc's built-in jail infrastructure create entries for 612# each jail, specified in jail_list, with the following variables. 613# NOTES: 614# - replace 'example' with the jail's name. 615# - except rootdir, hostname and ip, all of the following variables may be made 616# global jail variables if you don't specify a jail name (ie. jail_interface). 617# 618#jail_example_rootdir="/usr/jail/default" # Jail's root directory 619#jail_example_hostname="default.domain.com" # Jail's hostname 620#jail_example_ip="192.168.0.10" # Jail's IP number 621#jail_example_interface="" # Interface to create the IP alias on 622#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 623#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 624 # starting the jail. More than one can be 625 # specified using a trailing number 626#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 627#jail_example_devfs_enable="NO" # mount devfs in the jail 628#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 629#jail_example_procfs_enable="NO" # mount procfs in jail 630#jail_example_mount_enable="NO" # mount/umount jail's fs 631#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 632#jail_example_fstab="" # fstab(5) for mount/umount 633#jail_example_flags="-l -U root" # flags for jail(8) 634 635############################################################## 636### Define source_rc_confs, the mechanism used by /etc/rc.* ## 637### scripts to source rc_conf_files overrides safely. ## 638############################################################## 639 640if [ -z "${source_rc_confs_defined}" ]; then 641 source_rc_confs_defined=yes 642 source_rc_confs () { 643 local i sourced_files 644 for i in ${rc_conf_files}; do 645 case ${sourced_files} in 646 *:$i:*) 647 ;; 648 *) 649 sourced_files="${sourced_files}:$i:" 650 if [ -r $i ]; then 651 . $i 652 fi 653 ;; 654 esac 655 done 656 } 657fi 658