rc.conf revision 178450
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 178450 2008-04-23 22:40:59Z brooks $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEMS" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36ddb_enable="NO" # Set to YES to load ddb scripts at boot. 37ddb_config="/etc/ddb.conf" # ddb(8) config file. 38devd_enable="YES" # Run devd, to trigger programs on device tree changes. 39devd_flags="" # Additional flags for devd(8). 40kldxref_enable="NO" # Build linker.hints files with kldxref(8). 41kldxref_clobber="NO" # Overwrite old linker.hints at boot. 42kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 43powerd_enable="NO" # Run powerd to lower our power usage. 44powerd_flags="" # Flags to powerd (if enabled). 45tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 46tmpsize="20m" # Size of mfs /tmp if created 47tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 48varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 49varsize="32m" # Size of mfs /var if created 50varmfs_flags="-S" # Extra mount options for the mfs /var 51populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 52cleanvar_enable="YES" # Clean the /var directory 53local_startup="/usr/local/etc/rc.d" # startup script dirs. 54script_name_sep=" " # Change if your startup scripts' names contain spaces 55rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 56 57# ZFS support 58zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 59 60# Experimental - test before enabling 61gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 62gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 63gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 64gbde_lockdir="/etc" # Where to look for gbde lockfiles 65 66# GELI disk encryption configuration. 67geli_devices="" # List of devices to automatically attach in addition to 68 # GELI devices listed in /etc/fstab. 69geli_tries="" # Number of times to attempt attaching geli device. 70 # If empty, kern.geom.eli.tries will be used. 71geli_default_flags="" # Default flags for geli(8). 72geli_autodetach="YES" # Automatically detach on last close. 73 # Providers are marked as such when all file systems are 74 # mounted. 75# Example use. 76#geli_devices="da1 mirror/home" 77#geli_da1_flags="-p -k /etc/geli/da1.keys" 78#geli_da1_autodetach="NO" 79#geli_mirror_home_flags="-k /etc/geli/home.keys" 80 81geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 82 # swap partitions. 83 84root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 85fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 86background_fsck="YES" # Attempt to run fsck in the background where possible. 87background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 88netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 89extra_netfs_types="NO" # List of network extra filesystem types for delayed 90 # mount at startup (or NO). 91 92############################################################## 93### Network configuration sub-section ###################### 94############################################################## 95 96### Basic network and firewall/security options: ### 97hostname="" # Set this! 98hostid_enable="YES" # Set host UUID. 99hostid_file="/etc/hostid" # File with hostuuid. 100nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 101dhclient_program="/sbin/dhclient" # Path to dhcp client program. 102dhclient_flags="" # Extra flags to pass to dhcp client. 103#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 104background_dhclient="NO" # Start dhcp client in the background. 105#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 106synchronous_dhclient="YES" # Start dhclient directly on configured 107 # interfaces during startup. 108wpa_supplicant_program="/usr/sbin/wpa_supplicant" 109wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 110wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 111# 112firewall_enable="NO" # Set to YES to enable firewall functionality 113firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 114firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 115firewall_quiet="NO" # Set to YES to suppress rule display 116firewall_logging="NO" # Set to YES to enable events logging 117firewall_flags="" # Flags passed to ipfw when type is a file 118firewall_myservices="" # List of TCP ports on which this host 119 # offers services 120firewall_allowservices="" # List of IPs which has access to 121 # $firewall_myservices 122firewall_trusted="" # List of IPs which has full access to this host 123firewall_logdeny="NO" # Set to YES to log default denied incoming 124 # packets. 125firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 126 # for which denied incoming packets are not 127 # logged. 128firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 129firewall_nat_interface="" # Public interface or IPaddress to use 130firewall_nat_flags="" # Additional configuration parameters 131dummynet_enable="NO" # Load the dummynet(4) module 132ip_portrange_first="NO" # Set first dynamically allocated port 133ip_portrange_last="NO" # Set last dynamically allocated port 134ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 135ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 136ike_flags="" # Additional flags for IKE daemon 137ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 138ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 139natd_program="/sbin/natd" # path to natd, if you want a different one. 140natd_enable="NO" # Enable natd (if firewall_enable == YES). 141natd_interface="" # Public interface or IPaddress to use. 142natd_flags="" # Additional flags for natd. 143ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 144ipfilter_program="/sbin/ipf" # where the ipfilter program lives 145ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 146 # /usr/src/contrib/ipfilter/rules for examples 147ipfilter_flags="" # additional flags for ipfilter 148ipnat_enable="NO" # Set to YES to enable ipnat functionality 149ipnat_program="/sbin/ipnat" # where the ipnat program lives 150ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 151ipnat_flags="" # additional flags for ipnat 152ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 153ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 154ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 155ipfs_enable="NO" # Set to YES to enable saving and restoring 156 # of state tables at shutdown and boot 157ipfs_program="/sbin/ipfs" # where the ipfs program lives 158ipfs_flags="" # additional flags for ipfs 159pf_enable="NO" # Set to YES to enable packet filter (pf) 160pf_rules="/etc/pf.conf" # rules definition file for pf 161pf_program="/sbin/pfctl" # where the pfctl program lives 162pf_flags="" # additional flags for pfctl 163pflog_enable="NO" # Set to YES to enable packet filter logging 164pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 165pflog_program="/sbin/pflogd" # where the pflogd program lives 166pflog_flags="" # additional flags for pflogd 167ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 168ftpproxy_flags="" # additional flags for ftp-proxy(8) 169pfsync_enable="NO" # Expose pf state to other hosts for syncing 170pfsync_syncdev="" # Interface for pfsync to work through 171pfsync_syncpeer="" # IP address of pfsync peer host 172pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 173tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 174log_in_vain="0" # >=1 to log connects to ports w/o listeners. 175tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 176tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 177 # NOTE: this violates the TCP specification 178icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 179icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 180network_interfaces="auto" # List of network interfaces (or "auto"). 181cloned_interfaces="" # List of cloned network interfaces to create. 182#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 183ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 184#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 185#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 186#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 187#vaps_ath0="wlan0" # VAP interfaces for ath0 device 188#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 189# 190#autobridge_interfaces="bridge0" # List of bridges to check 191#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 192# 193# If you have any sppp(4) interfaces above, you might also want to set 194# the following parameters. Refer to spppcontrol(8) for their meaning. 195sppp_interfaces="" # List of sppp interfaces. 196#sppp_interfaces="isp0" # example: sppp over ISDN 197#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 198gif_interfaces="" # List of GIF tunnels. 199#gif_interfaces="gif0 gif1" # Examples typically for a router. 200 # Choose correct tunnel addrs. 201#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 202#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 203fec_interfaces="" # List of Fast EtherChannels. 204#fec_interfaces="fec0 fec1" 205#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 206#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 207 208# User ppp configuration. 209ppp_enable="NO" # Start user-ppp (or NO). 210ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 211ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 212 # For details see man page for ppp(8). Default is auto. 213ppp_nat="YES" # Use PPP's internal network address translation or NO. 214ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 215ppp_user="root" # Which user to run ppp as 216 217# Start multiple instances of ppp at boot time 218#ppp_profile="profile1 profile2 profile3" # Which profiles to use 219#ppp_profile1_mode="ddial" # Override ppp mode for profile1 220#ppp_profile2_nat="NO" # Override nat mode for profile2 221# profile3 uses default ppp_mode and ppp_nat 222 223### Network daemon (miscellaneous) ### 224hostapd_enable="NO" # Run hostap daemon. 225syslogd_enable="YES" # Run syslog daemon (or NO). 226syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 227syslogd_flags="-s" # Flags to syslogd (if enabled). 228inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 229inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 230inetd_flags="-wW -C 60" # Optional flags to inetd 231# 232# named. It may be possible to run named in a sandbox, man security for 233# details. 234# 235named_enable="NO" # Run named, the DNS server (or NO). 236named_program="/usr/sbin/named" # path to named, if you want a different one. 237#named_flags="" # Flags for named 238named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 239named_uid="bind" # User to run named as 240named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 241named_chroot_autoupdate="YES" # Automatically install/update chrooted 242 # components of named. See /etc/rc.d/named. 243named_symlink_enable="YES" # Symlink the chrooted pid file 244 245# 246# kerberos. Do not run the admin daemons on slave servers 247# 248kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 249kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 250kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server 251kadmind5_server_enable="NO" # Run kadmind (or NO) 252kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 253kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 254kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 255 256rwhod_enable="NO" # Run the rwho daemon (or NO). 257rwhod_flags="" # Flags for rwhod 258rarpd_enable="NO" # Run rarpd (or NO). 259rarpd_flags="-a" # Flags to rarpd. 260bootparamd_enable="NO" # Run bootparamd (or NO). 261bootparamd_flags="" # Flags to bootparamd 262pppoed_enable="NO" # Run the PPP over Ethernet daemon. 263pppoed_provider="*" # Provider and ppp(8) config file entry. 264pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 265pppoed_interface="fxp0" # The interface that pppoed runs on. 266sshd_enable="NO" # Enable sshd 267sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 268sshd_flags="" # Additional flags for sshd. 269ftpd_enable="NO" # Enable stand-alone ftpd. 270ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 271ftpd_flags="" # Additional flags to stand-alone ftpd. 272 273### Network daemon (NFS): All need rpcbind_enable="YES" ### 274amd_enable="NO" # Run amd service with $amd_flags (or NO). 275amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 276amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 277amd_map_program="NO" # Can be set to "ypcat -k amd.master" 278nfs_client_enable="NO" # This host is an NFS client (or NO). 279nfs_access_cache="60" # Client cache timeout in seconds 280nfs_server_enable="NO" # This host is an NFS server (or NO). 281nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 282idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 283idmapd_flags="" # Additional flags for idmapd. 284mountd_enable="NO" # Run mountd (or NO). 285mountd_flags="-r" # Flags to mountd (if NFS server enabled). 286weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 287nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 288nfs_bufpackets="" # bufspace (in packets) for client 289rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 290rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 291rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 292rpc_statd_flags="" # Flags to rpc.statd (if enabled). 293rpcbind_enable="NO" # Run the portmapper service (YES/NO). 294rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 295rpcbind_flags="" # Flags to rpcbind (if enabled). 296rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 297keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 298keyserv_flags="" # Flags to keyserv (if enabled). 299 300### Network Time Services options: ### 301timed_enable="NO" # Run the time daemon (or NO). 302timed_flags="" # Flags to timed (if enabled). 303ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 304ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 305ntpdate_flags="-b" # Flags to ntpdate (if enabled). 306ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 307ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 308ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 309ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 310ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 311ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 312ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 313 # Flags to ntpd (if enabled). 314 315# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 316nis_client_enable="NO" # We're an NIS client (or NO). 317nis_client_flags="" # Flags to ypbind (if enabled). 318nis_ypset_enable="NO" # Run ypset at boot time (or NO). 319nis_ypset_flags="" # Flags to ypset (if enabled). 320nis_server_enable="NO" # We're an NIS server (or NO). 321nis_server_flags="" # Flags to ypserv (if enabled). 322nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 323nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 324nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 325nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 326 327### SNMP daemon ### 328# Be sure to understand the security implications of running SNMP v1/v2 329# in your network. 330bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 331bsnmpd_flags="" # Flags for bsnmpd. 332 333### Network routing options: ### 334defaultrouter="NO" # Set to default gateway (or NO). 335static_routes="" # Set to static route list (or leave empty). 336natm_static_routes="" # Set to static route list for NATM (or leave empty). 337gateway_enable="NO" # Set to YES if this host will be a gateway. 338router_enable="NO" # Set to YES to enable a routing daemon. 339router="/sbin/routed" # Name of routing daemon to use if enabled. 340router_flags="-q" # Flags for routing daemon. 341mrouted_enable="NO" # Do IPv4 multicast routing. 342mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 343 # routing daemon. You need to 344 # install it from package or 345 # port. 346mrouted_flags="" # Flags for multicast routing daemon. 347ipxgateway_enable="NO" # Set to YES to enable IPX routing. 348ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 349ipxrouted_flags="" # Flags for IPX routing daemon. 350arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 351forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 352accept_sourceroute="NO" # accept source routed packets to us 353 354### ATM interface options: ### 355atm_enable="NO" # Configure ATM interfaces (or NO). 356#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 357#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 358#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 359#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 360#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 361#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 362atm_pvcs="" # Set to PVC list (or leave empty). 363atm_arps="" # Set to permanent ARP list (or leave empty). 364 365### ISDN interface options: (see also: /usr/share/examples/isdn) ### 366isdn_enable="NO" # Enable the ISDN subsystem (or NO). 367isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 368isdn_flags="-dn -d0x1f9" # Flags for isdnd 369isdn_ttype="cons25" # terminal type for fullscreen mode 370isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 371isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 372isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 373 374### Bluetooth ### 375hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 376hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 377 378sdpd_enable="NO" # Enable sdpd(8) (or NO) 379sdpd_control="/var/run/sdp" # sdpd(8) control socket 380sdpd_groupname="nobody" # set spdp(8) user/group to run as after 381sdpd_username="nobody" # it initializes 382 383bthidd_enable="NO" # Enable bthidd(8) (or NO) 384bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 385bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 386 387rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 388rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 389# 390#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 391rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 392#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 393#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 394# 395#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 396rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 397#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 398#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 399 400### Miscellaneous network options: ### 401icmp_bmcastecho="NO" # respond to broadcast ping packets 402 403### IPv6 options: ### 404ipv6_enable="NO" # Set to YES to set up for IPv6. 405ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 406ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 407#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 408ipv6_static_routes="" # Set to static route list (or leave empty). 409#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 410 # route toward loopback interface. 411#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 412ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 413ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 414ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 415ipv6_router_flags="" # Flags to IPv6 routing daemon. 416#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 417 # addrs. 418#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 419 # node, you should stop advertisement. 420#ipv6_network_interfaces="ed0 ep0" # Examples for router 421 # or static configuration for end node. 422 # Choose correct prefix value. 423#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 424#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 425#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 426#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 427ipv6_default_interface="NO" # Default output interface for scoped addrs. 428 # Now this works only for IPv6 link local 429 # multicast addrs. 430rtsol_flags="" # Flags to IPv6 router solicitation. 431rtadvd_enable="NO" # Set to YES to enable an IPv6 router 432 # advertisement daemon. If set to YES, 433 # this router becomes a possible candidate 434 # IPv6 default router for local subnets. 435rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 436mroute6d_enable="NO" # Do IPv6 multicast routing. 437mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 438 # routing daemon. You need to 439 # install it from package or 440 # port. 441mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 442stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 443 # tunneling interface. Specify this entry 444 # to enable 6to4 interface. 445stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 446 # to limit peer addr range. Effective value 447 # is 0-31. 448stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 449 # If you like, you can set "AUTO" for this. 450stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 451ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 452 # IPv6-to-IPv4 TCP translator. You also need 453 # faithd(8) setup. 454ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 455 # communication. (like ::ffff:a.b.c.d) 456ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 457 # functionality 458ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 459ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 460ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 461ipv6_firewall_logging="NO" # Set to YES to enable events logging 462ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 463ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 464 # see /usr/src/contrib/ipfilter/rules 465 # for examples 466ip6addrctl_enable="YES" # Set to YES to enable default address selection 467ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 468 469############################################################## 470### System console options ################################# 471############################################################## 472 473keyboard="" # keyboard device to use (default /dev/kbd0). 474keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 475keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 476keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 477keychange="NO" # function keys default values (or NO). 478cursor="NO" # cursor type {normal|blink|destructive} (or NO). 479scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 480font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 481font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 482font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 483blanktime="300" # blank time (in seconds) or "NO" to turn it off. 484saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 485moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 486 # specifically overriden in rc.conf(5). 487moused_enable="NO" # Run the mouse daemon. 488moused_type="auto" # See man page for rc.conf(5) for available settings. 489moused_port="/dev/psm0" # Set to your mouse port. 490moused_flags="" # Any additional flags to moused. 491mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 492 # language code table, specify alternative range 493 # start like mousechar_start=3, see vidcontrol(1) 494allscreens_flags="" # Set this vidcontrol mode for all virtual screens 495allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 496 497############################################################## 498### Mail Transfer Agent (MTA) options ###################### 499############################################################## 500 501mta_start_script="/etc/rc.sendmail" 502 # Script to start your chosen MTA, called by /etc/rc. 503# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 504sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 505sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 506sendmail_procname="/usr/sbin/sendmail" # sendmail process name 507sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 508sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 509sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 510 # Flags for localhost-only MTA 511sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 512sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 513sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 514sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 515 # Flags for sendmail_msp_queue daemon. 516sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 517 518 519############################################################## 520### Miscellaneous administrative options ################### 521############################################################## 522 523auditd_enable="NO" # Run the audit daemon. 524auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 525auditd_flags="" # Which options to pass to the audit daemon. 526cron_enable="YES" # Run the periodic job daemon. 527cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 528cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 529cron_flags="" # Which options to pass to the cron daemon. 530lpd_enable="NO" # Run the line printer daemon. 531lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 532lpd_flags="" # Flags to lpd (if enabled). 533nscd_enable="NO" # Run the nsswitch caching daemon. 534chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 535chkprintcap_flags="-d" # Create missing directories by default. 536dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 537dumpdir="/var/crash" # Directory where crash dumps are to be stored 538savecore_flags="" # Used if dumpdev is enabled above, and present. 539enable_quotas="NO" # turn on quotas on startup (or NO). 540check_quotas="YES" # Check quotas on startup (or NO). 541quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 542quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 543quotacheck_flags="-a" # Check all file system quotas (if enabled) 544accounting_enable="NO" # Turn on process accounting (or NO). 545ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 546ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 547 548# Emulation/compatibility services provided by /etc/rc.d/abi 549sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 550linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 551svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 552 553clear_tmp_enable="NO" # Clear /tmp at startup. 554clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 555ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 556ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 557 # shared library search paths 558ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 559ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 560 # a.out shared library search paths 561ldconfig_local_dirs="/usr/local/libdata/ldconfig" 562 # Local directories with ldconfig configuration files. 563ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 564 # Local directories with 32-bit compatibility ldconfig 565 # configuration files. 566kern_securelevel_enable="NO" # kernel security level (see init(8)), 567kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 568 # Note that setting securelevel to 0 will result 569 # in the system booting with securelevel set to 1, as 570 # init(8) will raise the level when rc(8) completes. 571update_motd="YES" # update version info in /etc/motd (or NO) 572entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 573 # /var/db/entropy-file is preferred if / is not avail. 574entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 575entropy_save_sz="2048" # Size of the entropy cache files. 576entropy_save_num="8" # Number of entropy cache files to save. 577harvest_interrupt="YES" # Entropy device harvests interrupt randomness 578harvest_ethernet="YES" # Entropy device harvests ethernet randomness 579harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 580dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 581watchdogd_enable="NO" # Start the software watchdog daemon 582devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 583 # devfs(8) rules. 584devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 585devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 586 # apply (must be mounted already, i.e. fstab(5)) 587performance_cx_lowest="HIGH" # Online CPU idle state 588performance_cpu_freq="NONE" # Online CPU frequency 589economy_cx_lowest="HIGH" # Offline CPU idle state 590economy_cpu_freq="NONE" # Offline CPU frequency 591virecover_enable="YES" # Perform housekeeping for the vi(1) editor 592ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 593bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 594 # ruleset file. 595newsyslog_enable="YES" # Run newsyslog at startup. 596newsyslog_flags="-CN" # Newsyslog flags to create marked files 597mixer_enable="YES" # Run the sound mixer. 598 599############################################################## 600### Jail Configuration ####################################### 601############################################################## 602jail_enable="NO" # Set to NO to disable starting of any jails 603jail_list="" # Space separated list of names of jails 604jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 605jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 606jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 607 608# 609# To use rc's built-in jail infrastructure create entries for 610# each jail, specified in jail_list, with the following variables. 611# NOTES: 612# - replace 'example' with the jail's name. 613# - except rootdir, hostname and ip, all of the following variables may be made 614# global jail variables if you don't specify a jail name (ie. jail_interface). 615# 616#jail_example_rootdir="/usr/jail/default" # Jail's root directory 617#jail_example_hostname="default.domain.com" # Jail's hostname 618#jail_example_ip="192.168.0.10" # Jail's IP number 619#jail_example_interface="" # Interface to create the IP alias on 620#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 621#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 622 # starting the jail. More than one can be 623 # specified using a trailing number 624#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 625#jail_example_devfs_enable="NO" # mount devfs in the jail 626#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 627#jail_example_procfs_enable="NO" # mount procfs in jail 628#jail_example_mount_enable="NO" # mount/umount jail's fs 629#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 630#jail_example_fstab="" # fstab(5) for mount/umount 631#jail_example_flags="-l -U root" # flags for jail(8) 632 633############################################################## 634### Define source_rc_confs, the mechanism used by /etc/rc.* ## 635### scripts to source rc_conf_files overrides safely. ## 636############################################################## 637 638if [ -z "${source_rc_confs_defined}" ]; then 639 source_rc_confs_defined=yes 640 source_rc_confs () { 641 local i sourced_files 642 for i in ${rc_conf_files}; do 643 case ${sourced_files} in 644 *:$i:*) 645 ;; 646 *) 647 sourced_files="${sourced_files}:$i:" 648 if [ -r $i ]; then 649 . $i 650 fi 651 ;; 652 esac 653 done 654 } 655fi 656