rc.conf revision 176835
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 176835 2008-03-05 18:32:58Z brooks $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEMS" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36ddb_enable="NO" # Set to YES to load ddb scripts at boot. 37ddb_config="/etc/ddb.conf" # ddb(8) config file. 38devd_enable="YES" # Run devd, to trigger programs on device tree changes. 39devd_flags="" # Additional flags for devd(8). 40kldxref_enable="NO" # Build linker.hints files with kldxref(8). 41kldxref_clobber="NO" # Overwrite old linker.hints at boot. 42kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 43powerd_enable="NO" # Run powerd to lower our power usage. 44powerd_flags="" # Flags to powerd (if enabled). 45tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 46tmpsize="20m" # Size of mfs /tmp if created 47tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 48varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 49varsize="32m" # Size of mfs /var if created 50varmfs_flags="-S" # Extra mount options for the mfs /var 51populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 52cleanvar_enable="YES" # Clean the /var directory 53local_startup="/usr/local/etc/rc.d" # startup script dirs. 54script_name_sep=" " # Change if your startup scripts' names contain spaces 55rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 56 57# ZFS support 58zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 59 60# Experimental - test before enabling 61gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 62gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 63gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 64gbde_lockdir="/etc" # Where to look for gbde lockfiles 65 66# GELI disk encryption configuration. 67geli_devices="" # List of devices to automatically attach in addition to 68 # GELI devices listed in /etc/fstab. 69geli_tries="" # Number of times to attempt attaching geli device. 70 # If empty, kern.geom.eli.tries will be used. 71geli_default_flags="" # Default flags for geli(8). 72geli_autodetach="YES" # Automatically detach on last close. 73 # Providers are marked as such when all file systems are 74 # mounted. 75# Example use. 76#geli_devices="da1 mirror/home" 77#geli_da1_flags="-p -k /etc/geli/da1.keys" 78#geli_da1_autodetach="NO" 79#geli_mirror_home_flags="-k /etc/geli/home.keys" 80 81geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 82 # swap partitions. 83 84root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 85fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 86background_fsck="YES" # Attempt to run fsck in the background where possible. 87background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 88netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 89extra_netfs_types="NO" # List of network extra filesystem types for delayed 90 # mount at startup (or NO). 91 92############################################################## 93### Network configuration sub-section ###################### 94############################################################## 95 96### Basic network and firewall/security options: ### 97hostname="" # Set this! 98hostid_enable="YES" # Set host UUID. 99hostid_file="/etc/hostid" # File with hostuuid. 100nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 101dhclient_program="/sbin/dhclient" # Path to dhcp client program. 102dhclient_flags="" # Extra flags to pass to dhcp client. 103#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 104background_dhclient="NO" # Start dhcp client in the background. 105#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 106synchronous_dhclient="YES" # Start dhclient directly on configured 107 # interfaces during startup. 108firewall_enable="NO" # Set to YES to enable firewall functionality 109firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 110firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 111firewall_quiet="NO" # Set to YES to suppress rule display 112firewall_logging="NO" # Set to YES to enable events logging 113firewall_flags="" # Flags passed to ipfw when type is a file 114firewall_myservices="" # List of TCP ports on which this host 115 # offers services 116firewall_allowservices="" # List of IPs which has access to 117 # $firewall_myservices 118firewall_trusted="" # List of IPs which has full access to this host 119firewall_logdeny="NO" # Set to YES to log default denied incoming 120 # packets. 121firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 122 # for which denied incoming packets are not 123 # logged. 124firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 125firewall_nat_interface="" # Public interface or IPaddress to use 126firewall_nat_flags="" # Additional configuration parameters 127dummynet_enable="NO" # Load the dummynet(4) module 128ip_portrange_first="NO" # Set first dynamically allocated port 129ip_portrange_last="NO" # Set last dynamically allocated port 130ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 131ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 132ike_flags="" # Additional flags for IKE daemon 133ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 134ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 135natd_program="/sbin/natd" # path to natd, if you want a different one. 136natd_enable="NO" # Enable natd (if firewall_enable == YES). 137natd_interface="" # Public interface or IPaddress to use. 138natd_flags="" # Additional flags for natd. 139ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 140ipfilter_program="/sbin/ipf" # where the ipfilter program lives 141ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 142 # /usr/src/contrib/ipfilter/rules for examples 143ipfilter_flags="" # additional flags for ipfilter 144ipnat_enable="NO" # Set to YES to enable ipnat functionality 145ipnat_program="/sbin/ipnat" # where the ipnat program lives 146ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 147ipnat_flags="" # additional flags for ipnat 148ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 149ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 150ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 151ipfs_enable="NO" # Set to YES to enable saving and restoring 152 # of state tables at shutdown and boot 153ipfs_program="/sbin/ipfs" # where the ipfs program lives 154ipfs_flags="" # additional flags for ipfs 155pf_enable="NO" # Set to YES to enable packet filter (pf) 156pf_rules="/etc/pf.conf" # rules definition file for pf 157pf_program="/sbin/pfctl" # where the pfctl program lives 158pf_flags="" # additional flags for pfctl 159pflog_enable="NO" # Set to YES to enable packet filter logging 160pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 161pflog_program="/sbin/pflogd" # where the pflogd program lives 162pflog_flags="" # additional flags for pflogd 163ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 164ftpproxy_flags="" # additional flags for ftp-proxy(8) 165pfsync_enable="NO" # Expose pf state to other hosts for syncing 166pfsync_syncdev="" # Interface for pfsync to work through 167pfsync_syncpeer="" # IP address of pfsync peer host 168pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 169tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 170log_in_vain="0" # >=1 to log connects to ports w/o listeners. 171tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 172tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 173 # NOTE: this violates the TCP specification 174icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 175icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 176network_interfaces="auto" # List of network interfaces (or "auto"). 177cloned_interfaces="" # List of cloned network interfaces to create. 178#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 179ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 180#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 181#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 182#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 183#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 184# 185#autobridge_interfaces="bridge0" # List of bridges to check 186#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 187# 188# If you have any sppp(4) interfaces above, you might also want to set 189# the following parameters. Refer to spppcontrol(8) for their meaning. 190sppp_interfaces="" # List of sppp interfaces. 191#sppp_interfaces="isp0" # example: sppp over ISDN 192#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 193gif_interfaces="" # List of GIF tunnels. 194#gif_interfaces="gif0 gif1" # Examples typically for a router. 195 # Choose correct tunnel addrs. 196#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 197#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 198fec_interfaces="" # List of Fast EtherChannels. 199#fec_interfaces="fec0 fec1" 200#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 201#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 202 203# User ppp configuration. 204ppp_enable="NO" # Start user-ppp (or NO). 205ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 206ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 207 # For details see man page for ppp(8). Default is auto. 208ppp_nat="YES" # Use PPP's internal network address translation or NO. 209ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 210ppp_user="root" # Which user to run ppp as 211 212# Start multiple instances of ppp at boot time 213#ppp_profile="profile1 profile2 profile3" # Which profiles to use 214#ppp_profile1_mode="ddial" # Override ppp mode for profile1 215#ppp_profile2_nat="NO" # Override nat mode for profile2 216# profile3 uses default ppp_mode and ppp_nat 217 218### Network daemon (miscellaneous) ### 219hostapd_enable="NO" # Run hostap daemon. 220syslogd_enable="YES" # Run syslog daemon (or NO). 221syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 222syslogd_flags="-s" # Flags to syslogd (if enabled). 223inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 224inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 225inetd_flags="-wW -C 60" # Optional flags to inetd 226# 227# named. It may be possible to run named in a sandbox, man security for 228# details. 229# 230named_enable="NO" # Run named, the DNS server (or NO). 231named_program="/usr/sbin/named" # path to named, if you want a different one. 232#named_flags="" # Flags for named 233named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 234named_uid="bind" # User to run named as 235named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 236named_chroot_autoupdate="YES" # Automatically install/update chrooted 237 # components of named. See /etc/rc.d/named. 238named_symlink_enable="YES" # Symlink the chrooted pid file 239 240# 241# kerberos. Do not run the admin daemons on slave servers 242# 243kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 244kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 245kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server 246kadmind5_server_enable="NO" # Run kadmind (or NO) 247kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 248kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 249kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 250 251rwhod_enable="NO" # Run the rwho daemon (or NO). 252rwhod_flags="" # Flags for rwhod 253rarpd_enable="NO" # Run rarpd (or NO). 254rarpd_flags="" # Flags to rarpd. 255bootparamd_enable="NO" # Run bootparamd (or NO). 256bootparamd_flags="" # Flags to bootparamd 257pppoed_enable="NO" # Run the PPP over Ethernet daemon. 258pppoed_provider="*" # Provider and ppp(8) config file entry. 259pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 260pppoed_interface="fxp0" # The interface that pppoed runs on. 261sshd_enable="NO" # Enable sshd 262sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 263sshd_flags="" # Additional flags for sshd. 264ftpd_enable="NO" # Enable stand-alone ftpd. 265ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 266ftpd_flags="" # Additional flags to stand-alone ftpd. 267 268### Network daemon (NFS): All need rpcbind_enable="YES" ### 269amd_enable="NO" # Run amd service with $amd_flags (or NO). 270amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 271amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 272amd_map_program="NO" # Can be set to "ypcat -k amd.master" 273nfs_client_enable="NO" # This host is an NFS client (or NO). 274nfs_access_cache="60" # Client cache timeout in seconds 275nfs_server_enable="NO" # This host is an NFS server (or NO). 276nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 277idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 278idmapd_flags="" # Additional flags for idmapd. 279mountd_enable="NO" # Run mountd (or NO). 280mountd_flags="-r" # Flags to mountd (if NFS server enabled). 281weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 282nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 283nfs_bufpackets="" # bufspace (in packets) for client 284rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 285rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 286rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 287rpc_statd_flags="" # Flags to rpc.statd (if enabled). 288rpcbind_enable="NO" # Run the portmapper service (YES/NO). 289rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 290rpcbind_flags="" # Flags to rpcbind (if enabled). 291rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 292keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 293keyserv_flags="" # Flags to keyserv (if enabled). 294 295### Network Time Services options: ### 296timed_enable="NO" # Run the time daemon (or NO). 297timed_flags="" # Flags to timed (if enabled). 298ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 299ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 300ntpdate_flags="-b" # Flags to ntpdate (if enabled). 301ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 302ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 303ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 304ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 305ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 306ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 307ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 308 # Flags to ntpd (if enabled). 309 310# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 311nis_client_enable="NO" # We're an NIS client (or NO). 312nis_client_flags="" # Flags to ypbind (if enabled). 313nis_ypset_enable="NO" # Run ypset at boot time (or NO). 314nis_ypset_flags="" # Flags to ypset (if enabled). 315nis_server_enable="NO" # We're an NIS server (or NO). 316nis_server_flags="" # Flags to ypserv (if enabled). 317nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 318nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 319nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 320nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 321 322### SNMP daemon ### 323# Be sure to understand the security implications of running SNMP v1/v2 324# in your network. 325bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 326bsnmpd_flags="" # Flags for bsnmpd. 327 328### Network routing options: ### 329defaultrouter="NO" # Set to default gateway (or NO). 330static_routes="" # Set to static route list (or leave empty). 331natm_static_routes="" # Set to static route list for NATM (or leave empty). 332gateway_enable="NO" # Set to YES if this host will be a gateway. 333router_enable="NO" # Set to YES to enable a routing daemon. 334router="/sbin/routed" # Name of routing daemon to use if enabled. 335router_flags="-q" # Flags for routing daemon. 336mrouted_enable="NO" # Do IPv4 multicast routing. 337mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 338 # routing daemon. You need to 339 # install it from package or 340 # port. 341mrouted_flags="" # Flags for multicast routing daemon. 342ipxgateway_enable="NO" # Set to YES to enable IPX routing. 343ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 344ipxrouted_flags="" # Flags for IPX routing daemon. 345arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 346forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 347accept_sourceroute="NO" # accept source routed packets to us 348 349### ATM interface options: ### 350atm_enable="NO" # Configure ATM interfaces (or NO). 351#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 352#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 353#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 354#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 355#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 356#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 357atm_pvcs="" # Set to PVC list (or leave empty). 358atm_arps="" # Set to permanent ARP list (or leave empty). 359 360### ISDN interface options: (see also: /usr/share/examples/isdn) ### 361isdn_enable="NO" # Enable the ISDN subsystem (or NO). 362isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 363isdn_flags="-dn -d0x1f9" # Flags for isdnd 364isdn_ttype="cons25" # terminal type for fullscreen mode 365isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 366isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 367isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 368 369### Bluetooth ### 370hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 371hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 372 373sdpd_enable="NO" # Enable sdpd(8) (or NO) 374sdpd_control="/var/run/sdp" # sdpd(8) control socket 375sdpd_groupname="nobody" # set spdp(8) user/group to run as after 376sdpd_username="nobody" # it initializes 377 378bthidd_enable="NO" # Enable bthidd(8) (or NO) 379bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 380bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 381 382### Miscellaneous network options: ### 383icmp_bmcastecho="NO" # respond to broadcast ping packets 384 385### IPv6 options: ### 386ipv6_enable="NO" # Set to YES to set up for IPv6. 387ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 388ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 389#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 390ipv6_static_routes="" # Set to static route list (or leave empty). 391#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 392 # route toward loopback interface. 393#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 394ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 395ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 396ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 397ipv6_router_flags="" # Flags to IPv6 routing daemon. 398#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 399 # addrs. 400#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 401 # node, you should stop advertisement. 402#ipv6_network_interfaces="ed0 ep0" # Examples for router 403 # or static configuration for end node. 404 # Choose correct prefix value. 405#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 406#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 407#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 408#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 409ipv6_default_interface="NO" # Default output interface for scoped addrs. 410 # Now this works only for IPv6 link local 411 # multicast addrs. 412rtsol_flags="" # Flags to IPv6 router solicitation. 413rtadvd_enable="NO" # Set to YES to enable an IPv6 router 414 # advertisement daemon. If set to YES, 415 # this router becomes a possible candidate 416 # IPv6 default router for local subnets. 417rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 418mroute6d_enable="NO" # Do IPv6 multicast routing. 419mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 420 # routing daemon. You need to 421 # install it from package or 422 # port. 423mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 424stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 425 # tunneling interface. Specify this entry 426 # to enable 6to4 interface. 427stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 428 # to limit peer addr range. Effective value 429 # is 0-31. 430stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 431 # If you like, you can set "AUTO" for this. 432stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 433ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 434 # IPv6-to-IPv4 TCP translator. You also need 435 # faithd(8) setup. 436ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 437 # communication. (like ::ffff:a.b.c.d) 438ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 439 # functionality 440ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 441ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 442ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 443ipv6_firewall_logging="NO" # Set to YES to enable events logging 444ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 445ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 446 # see /usr/src/contrib/ipfilter/rules 447 # for examples 448ip6addrctl_enable="YES" # Set to YES to enable default address selection 449ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 450 451############################################################## 452### System console options ################################# 453############################################################## 454 455keyboard="" # keyboard device to use (default /dev/kbd0). 456keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 457keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 458keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 459keychange="NO" # function keys default values (or NO). 460cursor="NO" # cursor type {normal|blink|destructive} (or NO). 461scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 462font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 463font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 464font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 465blanktime="300" # blank time (in seconds) or "NO" to turn it off. 466saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 467moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 468 # specifically overriden in rc.conf(5). 469moused_enable="NO" # Run the mouse daemon. 470moused_type="auto" # See man page for rc.conf(5) for available settings. 471moused_port="/dev/psm0" # Set to your mouse port. 472moused_flags="" # Any additional flags to moused. 473mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 474 # language code table, specify alternative range 475 # start like mousechar_start=3, see vidcontrol(1) 476allscreens_flags="" # Set this vidcontrol mode for all virtual screens 477allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 478 479############################################################## 480### Mail Transfer Agent (MTA) options ###################### 481############################################################## 482 483mta_start_script="/etc/rc.sendmail" 484 # Script to start your chosen MTA, called by /etc/rc. 485# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 486sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 487sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 488sendmail_procname="/usr/sbin/sendmail" # sendmail process name 489sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 490sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 491sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 492 # Flags for localhost-only MTA 493sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 494sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 495sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 496sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 497 # Flags for sendmail_msp_queue daemon. 498sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 499 500 501############################################################## 502### Miscellaneous administrative options ################### 503############################################################## 504 505auditd_enable="NO" # Run the audit daemon. 506auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 507auditd_flags="" # Which options to pass to the audit daemon. 508cron_enable="YES" # Run the periodic job daemon. 509cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 510cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 511cron_flags="" # Which options to pass to the cron daemon. 512lpd_enable="NO" # Run the line printer daemon. 513lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 514lpd_flags="" # Flags to lpd (if enabled). 515nscd_enable="NO" # Run the nsswitch caching daemon. 516chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 517chkprintcap_flags="-d" # Create missing directories by default. 518dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 519dumpdir="/var/crash" # Directory where crash dumps are to be stored 520savecore_flags="" # Used if dumpdev is enabled above, and present. 521enable_quotas="NO" # turn on quotas on startup (or NO). 522check_quotas="YES" # Check quotas on startup (or NO). 523quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 524quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 525quotacheck_flags="-a" # Check all file system quotas (if enabled) 526accounting_enable="NO" # Turn on process accounting (or NO). 527ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 528ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 529 530# Emulation/compatibility services provided by /etc/rc.d/abi 531sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 532linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 533svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 534 535clear_tmp_enable="NO" # Clear /tmp at startup. 536clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 537ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 538ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 539 # shared library search paths 540ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 541ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 542 # a.out shared library search paths 543ldconfig_local_dirs="/usr/local/libdata/ldconfig" 544 # Local directories with ldconfig configuration files. 545ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 546 # Local directories with 32-bit compatibility ldconfig 547 # configuration files. 548kern_securelevel_enable="NO" # kernel security level (see init(8)), 549kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 550 # Note that setting securelevel to 0 will result 551 # in the system booting with securelevel set to 1, as 552 # init(8) will raise the level when rc(8) completes. 553update_motd="YES" # update version info in /etc/motd (or NO) 554entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 555 # /var/db/entropy-file is preferred if / is not avail. 556entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 557entropy_save_sz="2048" # Size of the entropy cache files. 558entropy_save_num="8" # Number of entropy cache files to save. 559harvest_interrupt="YES" # Entropy device harvests interrupt randomness 560harvest_ethernet="YES" # Entropy device harvests ethernet randomness 561harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 562dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 563watchdogd_enable="NO" # Start the software watchdog daemon 564devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 565 # devfs(8) rules. 566devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 567devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 568 # apply (must be mounted already, i.e. fstab(5)) 569performance_cx_lowest="HIGH" # Online CPU idle state 570performance_cpu_freq="NONE" # Online CPU frequency 571economy_cx_lowest="HIGH" # Offline CPU idle state 572economy_cpu_freq="NONE" # Offline CPU frequency 573virecover_enable="YES" # Perform housekeeping for the vi(1) editor 574ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 575bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 576 # ruleset file. 577newsyslog_enable="YES" # Run newsyslog at startup. 578newsyslog_flags="-CN" # Newsyslog flags to create marked files 579mixer_enable="YES" # Run the sound mixer. 580 581############################################################## 582### Jail Configuration ####################################### 583############################################################## 584jail_enable="NO" # Set to NO to disable starting of any jails 585jail_list="" # Space separated list of names of jails 586jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 587jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 588jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 589 590# 591# To use rc's built-in jail infrastructure create entries for 592# each jail, specified in jail_list, with the following variables. 593# NOTES: 594# - replace 'example' with the jail's name. 595# - except rootdir, hostname and ip, all of the following variables may be made 596# global jail variables if you don't specify a jail name (ie. jail_interface). 597# 598#jail_example_rootdir="/usr/jail/default" # Jail's root directory 599#jail_example_hostname="default.domain.com" # Jail's hostname 600#jail_example_ip="192.168.0.10" # Jail's IP number 601#jail_example_interface="" # Interface to create the IP alias on 602#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 603#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 604 # starting the jail. More than one can be 605 # specified using a trailing number 606#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 607#jail_example_devfs_enable="NO" # mount devfs in the jail 608#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 609#jail_example_procfs_enable="NO" # mount procfs in jail 610#jail_example_mount_enable="NO" # mount/umount jail's fs 611#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 612#jail_example_fstab="" # fstab(5) for mount/umount 613#jail_example_flags="-l -U root" # flags for jail(8) 614 615############################################################## 616### Define source_rc_confs, the mechanism used by /etc/rc.* ## 617### scripts to source rc_conf_files overrides safely. ## 618############################################################## 619 620if [ -z "${source_rc_confs_defined}" ]; then 621 source_rc_confs_defined=yes 622 source_rc_confs () { 623 local i sourced_files 624 for i in ${rc_conf_files}; do 625 case ${sourced_files} in 626 *:$i:*) 627 ;; 628 *) 629 sourced_files="${sourced_files}:$i:" 630 if [ -r $i ]; then 631 . $i 632 fi 633 ;; 634 esac 635 done 636 } 637fi 638