rc.conf revision 175656
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 175656 2008-01-25 05:23:01Z mtm $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEMS" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 44tmpsize="20m" # Size of mfs /tmp if created 45tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 47varsize="32m" # Size of mfs /var if created 48varmfs_flags="-S" # Extra mount options for the mfs /var 49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 50cleanvar_enable="YES" # Clean the /var directory 51local_startup="/usr/local/etc/rc.d" # startup script dirs. 52script_name_sep=" " # Change if your startup scripts' names contain spaces 53rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 54 55# ZFS support 56zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 57 58# Experimental - test before enabling 59gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 60gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 61gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 62gbde_lockdir="/etc" # Where to look for gbde lockfiles 63 64# GELI disk encryption configuration. 65geli_devices="" # List of devices to automatically attach in addition to 66 # GELI devices listed in /etc/fstab. 67geli_tries="" # Number of times to attempt attaching geli device. 68 # If empty, kern.geom.eli.tries will be used. 69geli_default_flags="" # Default flags for geli(8). 70geli_autodetach="YES" # Automatically detach on last close. 71 # Providers are marked as such when all file systems are 72 # mounted. 73# Example use. 74#geli_devices="da1 mirror/home" 75#geli_da1_flags="-p -k /etc/geli/da1.keys" 76#geli_da1_autodetach="NO" 77#geli_mirror_home_flags="-k /etc/geli/home.keys" 78 79geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 80 # swap partitions. 81 82root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 83fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 84background_fsck="YES" # Attempt to run fsck in the background where possible. 85background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 86netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 87extra_netfs_types="NO" # List of network extra filesystem types for delayed 88 # mount at startup (or NO). 89 90############################################################## 91### Network configuration sub-section ###################### 92############################################################## 93 94### Basic network and firewall/security options: ### 95hostname="" # Set this! 96hostid_enable="YES" # Set host UUID. 97hostid_file="/etc/hostid" # File with hostuuid. 98nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 99dhclient_program="/sbin/dhclient" # Path to dhcp client program. 100dhclient_flags="" # Extra flags to pass to dhcp client. 101#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 102background_dhclient="NO" # Start dhcp client in the background. 103#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 104synchronous_dhclient="YES" # Start dhclient directly on configured 105 # interfaces during startup. 106firewall_enable="NO" # Set to YES to enable firewall functionality 107firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 108firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 109firewall_quiet="NO" # Set to YES to suppress rule display 110firewall_logging="NO" # Set to YES to enable events logging 111firewall_flags="" # Flags passed to ipfw when type is a file 112firewall_myservices="" # List of TCP ports on which this host 113 # offers services 114firewall_allowservices="" # List of IPs which has access to 115 # $firewall_myservices 116firewall_trusted="" # List of IPs which has full access to this host 117firewall_logdeny="NO" # Set to YES to log default denied incoming 118 # packets. 119firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 120 # for which denied incoming packets are not 121 # logged. 122firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 123firewall_nat_interface="" # Public interface or IPaddress to use 124firewall_nat_flags="" # Additional configuration parameters 125ip_portrange_first="NO" # Set first dynamically allocated port 126ip_portrange_last="NO" # Set last dynamically allocated port 127ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 128ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 129ike_flags="" # Additional flags for IKE daemon 130ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 131ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 132natd_program="/sbin/natd" # path to natd, if you want a different one. 133natd_enable="NO" # Enable natd (if firewall_enable == YES). 134natd_interface="" # Public interface or IPaddress to use. 135natd_flags="" # Additional flags for natd. 136ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 137ipfilter_program="/sbin/ipf" # where the ipfilter program lives 138ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 139 # /usr/src/contrib/ipfilter/rules for examples 140ipfilter_flags="" # additional flags for ipfilter 141ipnat_enable="NO" # Set to YES to enable ipnat functionality 142ipnat_program="/sbin/ipnat" # where the ipnat program lives 143ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 144ipnat_flags="" # additional flags for ipnat 145ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 146ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 147ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 148ipfs_enable="NO" # Set to YES to enable saving and restoring 149 # of state tables at shutdown and boot 150ipfs_program="/sbin/ipfs" # where the ipfs program lives 151ipfs_flags="" # additional flags for ipfs 152pf_enable="NO" # Set to YES to enable packet filter (pf) 153pf_rules="/etc/pf.conf" # rules definition file for pf 154pf_program="/sbin/pfctl" # where the pfctl program lives 155pf_flags="" # additional flags for pfctl 156pflog_enable="NO" # Set to YES to enable packet filter logging 157pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 158pflog_program="/sbin/pflogd" # where the pflogd program lives 159pflog_flags="" # additional flags for pflogd 160ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 161ftpproxy_flags="" # additional flags for ftp-proxy(8) 162pfsync_enable="NO" # Expose pf state to other hosts for syncing 163pfsync_syncdev="" # Interface for pfsync to work through 164pfsync_syncpeer="" # IP address of pfsync peer host 165pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 166tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 167log_in_vain="0" # >=1 to log connects to ports w/o listeners. 168tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 169tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 170 # NOTE: this violates the TCP specification 171icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 172icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 173network_interfaces="auto" # List of network interfaces (or "auto"). 174cloned_interfaces="" # List of cloned network interfaces to create. 175#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 176ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 177#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 178#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 179#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 180#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 181# 182#autobridge_interfaces="bridge0" # List of bridges to check 183#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 184# 185# If you have any sppp(4) interfaces above, you might also want to set 186# the following parameters. Refer to spppcontrol(8) for their meaning. 187sppp_interfaces="" # List of sppp interfaces. 188#sppp_interfaces="isp0" # example: sppp over ISDN 189#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 190gif_interfaces="" # List of GIF tunnels. 191#gif_interfaces="gif0 gif1" # Examples typically for a router. 192 # Choose correct tunnel addrs. 193#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 194#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 195fec_interfaces="" # List of Fast EtherChannels. 196#fec_interfaces="fec0 fec1" 197#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 198#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 199 200# User ppp configuration. 201ppp_enable="NO" # Start user-ppp (or NO). 202ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 203ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 204 # For details see man page for ppp(8). Default is auto. 205ppp_nat="YES" # Use PPP's internal network address translation or NO. 206ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 207ppp_user="root" # Which user to run ppp as 208 209# Start multiple instances of ppp at boot time 210#ppp_profile="profile1 profile2 profile3" # Which profiles to use 211#ppp_profile1_mode="ddial" # Override ppp mode for profile1 212#ppp_profile2_nat="NO" # Override nat mode for profile2 213# profile3 uses default ppp_mode and ppp_nat 214 215### Network daemon (miscellaneous) ### 216hostapd_enable="NO" # Run hostap daemon. 217syslogd_enable="YES" # Run syslog daemon (or NO). 218syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 219syslogd_flags="-s" # Flags to syslogd (if enabled). 220inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 221inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 222inetd_flags="-wW -C 60" # Optional flags to inetd 223# 224# named. It may be possible to run named in a sandbox, man security for 225# details. 226# 227named_enable="NO" # Run named, the DNS server (or NO). 228named_program="/usr/sbin/named" # path to named, if you want a different one. 229#named_flags="" # Flags for named 230named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 231named_uid="bind" # User to run named as 232named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 233named_chroot_autoupdate="YES" # Automatically install/update chrooted 234 # components of named. See /etc/rc.d/named. 235named_symlink_enable="YES" # Symlink the chrooted pid file 236 237# 238# kerberos. Do not run the admin daemons on slave servers 239# 240kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 241kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 242kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server 243kadmind5_server_enable="NO" # Run kadmind (or NO) 244kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 245kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 246kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 247 248rwhod_enable="NO" # Run the rwho daemon (or NO). 249rwhod_flags="" # Flags for rwhod 250rarpd_enable="NO" # Run rarpd (or NO). 251rarpd_flags="" # Flags to rarpd. 252bootparamd_enable="NO" # Run bootparamd (or NO). 253bootparamd_flags="" # Flags to bootparamd 254pppoed_enable="NO" # Run the PPP over Ethernet daemon. 255pppoed_provider="*" # Provider and ppp(8) config file entry. 256pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 257pppoed_interface="fxp0" # The interface that pppoed runs on. 258sshd_enable="NO" # Enable sshd 259sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 260sshd_flags="" # Additional flags for sshd. 261ftpd_enable="NO" # Enable stand-alone ftpd. 262ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 263ftpd_flags="" # Additional flags to stand-alone ftpd. 264 265### Network daemon (NFS): All need rpcbind_enable="YES" ### 266amd_enable="NO" # Run amd service with $amd_flags (or NO). 267amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 268amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 269amd_map_program="NO" # Can be set to "ypcat -k amd.master" 270nfs_client_enable="NO" # This host is an NFS client (or NO). 271nfs_access_cache="60" # Client cache timeout in seconds 272nfs_server_enable="NO" # This host is an NFS server (or NO). 273nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 274idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 275idmapd_flags="" # Additional flags for idmapd. 276mountd_enable="NO" # Run mountd (or NO). 277mountd_flags="-r" # Flags to mountd (if NFS server enabled). 278weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 279nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 280nfs_bufpackets="" # bufspace (in packets) for client 281rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 282rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 283rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 284rpc_statd_flags="" # Flags to rpc.statd (if enabled). 285rpcbind_enable="NO" # Run the portmapper service (YES/NO). 286rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 287rpcbind_flags="" # Flags to rpcbind (if enabled). 288rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 289keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 290keyserv_flags="" # Flags to keyserv (if enabled). 291 292### Network Time Services options: ### 293timed_enable="NO" # Run the time daemon (or NO). 294timed_flags="" # Flags to timed (if enabled). 295ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 296ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 297ntpdate_flags="-b" # Flags to ntpdate (if enabled). 298ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 299ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 300ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 301ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 302ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 303ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 304ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 305 # Flags to ntpd (if enabled). 306 307# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 308nis_client_enable="NO" # We're an NIS client (or NO). 309nis_client_flags="" # Flags to ypbind (if enabled). 310nis_ypset_enable="NO" # Run ypset at boot time (or NO). 311nis_ypset_flags="" # Flags to ypset (if enabled). 312nis_server_enable="NO" # We're an NIS server (or NO). 313nis_server_flags="" # Flags to ypserv (if enabled). 314nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 315nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 316nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 317nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 318 319### SNMP daemon ### 320# Be sure to understand the security implications of running SNMP v1/v2 321# in your network. 322bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 323bsnmpd_flags="" # Flags for bsnmpd. 324 325### Network routing options: ### 326defaultrouter="NO" # Set to default gateway (or NO). 327static_routes="" # Set to static route list (or leave empty). 328natm_static_routes="" # Set to static route list for NATM (or leave empty). 329gateway_enable="NO" # Set to YES if this host will be a gateway. 330router_enable="NO" # Set to YES to enable a routing daemon. 331router="/sbin/routed" # Name of routing daemon to use if enabled. 332router_flags="-q" # Flags for routing daemon. 333mrouted_enable="NO" # Do IPv4 multicast routing. 334mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 335 # routing daemon. You need to 336 # install it from package or 337 # port. 338mrouted_flags="" # Flags for multicast routing daemon. 339ipxgateway_enable="NO" # Set to YES to enable IPX routing. 340ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 341ipxrouted_flags="" # Flags for IPX routing daemon. 342arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 343forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 344accept_sourceroute="NO" # accept source routed packets to us 345 346### ATM interface options: ### 347atm_enable="NO" # Configure ATM interfaces (or NO). 348#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 349#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 350#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 351#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 352#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 353#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 354atm_pvcs="" # Set to PVC list (or leave empty). 355atm_arps="" # Set to permanent ARP list (or leave empty). 356 357### ISDN interface options: (see also: /usr/share/examples/isdn) ### 358isdn_enable="NO" # Enable the ISDN subsystem (or NO). 359isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 360isdn_flags="-dn -d0x1f9" # Flags for isdnd 361isdn_ttype="cons25" # terminal type for fullscreen mode 362isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 363isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 364isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 365 366### Bluetooth ### 367hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 368hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 369 370sdpd_enable="NO" # Enable sdpd(8) (or NO) 371sdpd_control="/var/run/sdp" # sdpd(8) control socket 372sdpd_groupname="nobody" # set spdp(8) user/group to run as after 373sdpd_username="nobody" # it initializes 374 375bthidd_enable="NO" # Enable bthidd(8) (or NO) 376bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 377bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 378 379### Miscellaneous network options: ### 380icmp_bmcastecho="NO" # respond to broadcast ping packets 381 382### IPv6 options: ### 383ipv6_enable="NO" # Set to YES to set up for IPv6. 384ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 385ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 386#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 387ipv6_static_routes="" # Set to static route list (or leave empty). 388#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 389 # route toward loopback interface. 390#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 391ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 392ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 393ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 394ipv6_router_flags="" # Flags to IPv6 routing daemon. 395#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 396 # addrs. 397#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 398 # node, you should stop advertisement. 399#ipv6_network_interfaces="ed0 ep0" # Examples for router 400 # or static configuration for end node. 401 # Choose correct prefix value. 402#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 403#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 404#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 405#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 406ipv6_default_interface="NO" # Default output interface for scoped addrs. 407 # Now this works only for IPv6 link local 408 # multicast addrs. 409rtsol_flags="" # Flags to IPv6 router solicitation. 410rtadvd_enable="NO" # Set to YES to enable an IPv6 router 411 # advertisement daemon. If set to YES, 412 # this router becomes a possible candidate 413 # IPv6 default router for local subnets. 414rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 415mroute6d_enable="NO" # Do IPv6 multicast routing. 416mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 417 # routing daemon. You need to 418 # install it from package or 419 # port. 420mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 421stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 422 # tunneling interface. Specify this entry 423 # to enable 6to4 interface. 424stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 425 # to limit peer addr range. Effective value 426 # is 0-31. 427stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 428 # If you like, you can set "AUTO" for this. 429stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 430ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 431 # IPv6-to-IPv4 TCP translator. You also need 432 # faithd(8) setup. 433ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 434 # communication. (like ::ffff:a.b.c.d) 435ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 436 # functionality 437ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 438ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 439ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 440ipv6_firewall_logging="NO" # Set to YES to enable events logging 441ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 442ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 443 # see /usr/src/contrib/ipfilter/rules 444 # for examples 445ip6addrctl_enable="YES" # Set to YES to enable default address selection 446ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 447 448############################################################## 449### System console options ################################# 450############################################################## 451 452keyboard="" # keyboard device to use (default /dev/kbd0). 453keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 454keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 455keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 456keychange="NO" # function keys default values (or NO). 457cursor="NO" # cursor type {normal|blink|destructive} (or NO). 458scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 459font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 460font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 461font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 462blanktime="300" # blank time (in seconds) or "NO" to turn it off. 463saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 464moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 465 # specifically overriden in rc.conf(5). 466moused_enable="NO" # Run the mouse daemon. 467moused_type="auto" # See man page for rc.conf(5) for available settings. 468moused_port="/dev/psm0" # Set to your mouse port. 469moused_flags="" # Any additional flags to moused. 470mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 471 # language code table, specify alternative range 472 # start like mousechar_start=3, see vidcontrol(1) 473allscreens_flags="" # Set this vidcontrol mode for all virtual screens 474allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 475 476############################################################## 477### Mail Transfer Agent (MTA) options ###################### 478############################################################## 479 480mta_start_script="/etc/rc.sendmail" 481 # Script to start your chosen MTA, called by /etc/rc. 482# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 483sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 484sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 485sendmail_procname="/usr/sbin/sendmail" # sendmail process name 486sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 487sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 488sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 489 # Flags for localhost-only MTA 490sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 491sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 492sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 493sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 494 # Flags for sendmail_msp_queue daemon. 495sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 496 497 498############################################################## 499### Miscellaneous administrative options ################### 500############################################################## 501 502auditd_enable="NO" # Run the audit daemon. 503auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 504auditd_flags="" # Which options to pass to the audit daemon. 505cron_enable="YES" # Run the periodic job daemon. 506cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 507cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 508cron_flags="" # Which options to pass to the cron daemon. 509lpd_enable="NO" # Run the line printer daemon. 510lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 511lpd_flags="" # Flags to lpd (if enabled). 512nscd_enable="NO" # Run the nsswitch caching daemon. 513chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 514chkprintcap_flags="-d" # Create missing directories by default. 515dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 516dumpdir="/var/crash" # Directory where crash dumps are to be stored 517savecore_flags="" # Used if dumpdev is enabled above, and present. 518enable_quotas="NO" # turn on quotas on startup (or NO). 519check_quotas="YES" # Check quotas on startup (or NO). 520quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 521quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 522quotacheck_flags="-a" # Check all file system quotas (if enabled) 523accounting_enable="NO" # Turn on process accounting (or NO). 524ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 525ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 526 527# Emulation/compatibility services provided by /etc/rc.d/abi 528sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 529linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 530svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 531 532clear_tmp_enable="NO" # Clear /tmp at startup. 533clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 534ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 535ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 536 # shared library search paths 537ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 538ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 539 # a.out shared library search paths 540ldconfig_local_dirs="/usr/local/libdata/ldconfig" 541 # Local directories with ldconfig configuration files. 542ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 543 # Local directories with 32-bit compatibility ldconfig 544 # configuration files. 545kern_securelevel_enable="NO" # kernel security level (see init(8)), 546kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 547 # Note that setting securelevel to 0 will result 548 # in the system booting with securelevel set to 1, as 549 # init(8) will raise the level when rc(8) completes. 550update_motd="YES" # update version info in /etc/motd (or NO) 551entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 552 # /var/db/entropy-file is preferred if / is not avail. 553entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 554entropy_save_sz="2048" # Size of the entropy cache files. 555entropy_save_num="8" # Number of entropy cache files to save. 556harvest_interrupt="YES" # Entropy device harvests interrupt randomness 557harvest_ethernet="YES" # Entropy device harvests ethernet randomness 558harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 559dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 560watchdogd_enable="NO" # Start the software watchdog daemon 561devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 562 # devfs(8) rules. 563devfs_system_ruleset="" # The name of a ruleset to apply to /dev 564devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 565 # apply (must be mounted already, i.e. fstab(5)) 566performance_cx_lowest="HIGH" # Online CPU idle state 567performance_cpu_freq="NONE" # Online CPU frequency 568economy_cx_lowest="HIGH" # Offline CPU idle state 569economy_cpu_freq="NONE" # Offline CPU frequency 570virecover_enable="YES" # Perform housekeeping for the vi(1) editor 571ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 572bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 573 # ruleset file. 574newsyslog_enable="YES" # Run newsyslog at startup. 575newsyslog_flags="-CN" # Newsyslog flags to create marked files 576mixer_enable="YES" # Run the sound mixer. 577 578############################################################## 579### Jail Configuration ####################################### 580############################################################## 581jail_enable="NO" # Set to NO to disable starting of any jails 582jail_list="" # Space separated list of names of jails 583jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 584jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 585jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 586 587# 588# To use rc's built-in jail infrastructure create entries for 589# each jail, specified in jail_list, with the following variables. 590# NOTES: 591# - replace 'example' with the jail's name. 592# - except rootdir, hostname and ip, all of the following variables may be made 593# global jail variables if you don't specify a jail name (ie. jail_interface). 594# 595#jail_example_rootdir="/usr/jail/default" # Jail's root directory 596#jail_example_hostname="default.domain.com" # Jail's hostname 597#jail_example_ip="192.168.0.10" # Jail's IP number 598#jail_example_interface="" # Interface to create the IP alias on 599#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 600#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 601 # starting the jail. More than one can be 602 # specified using a trailing number 603#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 604#jail_example_devfs_enable="NO" # mount devfs in the jail 605#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 606#jail_example_procfs_enable="NO" # mount procfs in jail 607#jail_example_mount_enable="NO" # mount/umount jail's fs 608#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 609#jail_example_fstab="" # fstab(5) for mount/umount 610#jail_example_flags="-l -U root" # flags for jail(8) 611 612############################################################## 613### Define source_rc_confs, the mechanism used by /etc/rc.* ## 614### scripts to source rc_conf_files overrides safely. ## 615############################################################## 616 617if [ -z "${source_rc_confs_defined}" ]; then 618 source_rc_confs_defined=yes 619 source_rc_confs () { 620 local i sourced_files 621 for i in ${rc_conf_files}; do 622 case ${sourced_files} in 623 *:$i:*) 624 ;; 625 *) 626 sourced_files="${sourced_files}:$i:" 627 if [ -r $i ]; then 628 . $i 629 fi 630 ;; 631 esac 632 done 633 } 634fi 635