rc.conf revision 168546
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 168546 2007-04-09 19:21:27Z pjd $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEMS" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 44tmpsize="20m" # Size of mfs /tmp if created 45tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 47varsize="32m" # Size of mfs /var if created 48varmfs_flags="-S" # Extra mount options for the mfs /var 49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 50cleanvar_enable="YES" # Clean the /var directory 51local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 52script_name_sep=" " # Change if your startup scripts' names contain spaces 53rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 54 55# ZFS support 56zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 57 58# Experimental - test before enabling 59gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 60gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 61gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 62gbde_lockdir="/etc" # Where to look for gbde lockfiles 63 64# GELI disk encryption configuration. 65geli_devices="" # List of devices to automatically attach in addition to 66 # GELI devices listed in /etc/fstab. 67geli_tries="" # Number of times to attempt attaching geli device. 68 # If empty, kern.geom.eli.tries will be used. 69geli_default_flags="" # Default flags for geli(8). 70geli_autodetach="YES" # Automatically detach on last close. 71 # Providers are marked as such when all file systems are 72 # mounted. 73# Example use. 74#geli_devices="da1 mirror/home" 75#geli_da1_flags="-p -k /etc/geli/da1.keys" 76#geli_da1_autodetach="NO" 77#geli_mirror_home_flags="-k /etc/geli/home.keys" 78 79geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 80 # swap partitions. 81 82root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 83fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 84background_fsck="YES" # Attempt to run fsck in the background where possible. 85background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 86netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 87extra_netfs_types="NO" # List of network extra filesystem types for delayed 88 # mount at startup (or NO). 89 90############################################################## 91### Network configuration sub-section ###################### 92############################################################## 93 94### Basic network and firewall/security options: ### 95hostname="" # Set this! 96hostid_enable="YES" # Set host UUID. 97hostid_file="/etc/hostid" # File with hostuuid. 98nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 99dhclient_program="/sbin/dhclient" # Path to dhcp client program. 100dhclient_flags="" # Extra flags to pass to dhcp client. 101#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 102background_dhclient="NO" # Start dhcp client in the background. 103#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 104synchronous_dhclient="YES" # Start dhclient directly on configured 105 # interfaces during startup. 106firewall_enable="NO" # Set to YES to enable firewall functionality 107firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 108firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 109firewall_quiet="NO" # Set to YES to suppress rule display 110firewall_logging="NO" # Set to YES to enable events logging 111firewall_flags="" # Flags passed to ipfw when type is a file 112firewall_myservices="" # List of TCP ports on which this host 113 # offers services 114firewall_allowservices="" # List of IPs which has access to 115 # $firewall_myservices 116firewall_trusted="" # List of IPs which has full access to this host 117firewall_logdeny="NO" # Set to YES to log default denied incoming 118 # packets. 119firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 120 # for which denied incoming packets are not 121 # logged. 122ip_portrange_first="NO" # Set first dynamically allocated port 123ip_portrange_last="NO" # Set last dynamically allocated port 124ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 125ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 126ike_flags="" # Additional flags for IKE daemon 127ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 128ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 129natd_program="/sbin/natd" # path to natd, if you want a different one. 130natd_enable="NO" # Enable natd (if firewall_enable == YES). 131natd_interface="" # Public interface or IPaddress to use. 132natd_flags="" # Additional flags for natd. 133ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 134ipfilter_program="/sbin/ipf" # where the ipfilter program lives 135ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 136 # /usr/src/contrib/ipfilter/rules for examples 137ipfilter_flags="" # additional flags for ipfilter 138ipnat_enable="NO" # Set to YES to enable ipnat functionality 139ipnat_program="/sbin/ipnat" # where the ipnat program lives 140ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 141ipnat_flags="" # additional flags for ipnat 142ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 143ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 144ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 145ipfs_enable="NO" # Set to YES to enable saving and restoring 146 # of state tables at shutdown and boot 147ipfs_program="/sbin/ipfs" # where the ipfs program lives 148ipfs_flags="" # additional flags for ipfs 149pf_enable="NO" # Set to YES to enable packet filter (pf) 150pf_rules="/etc/pf.conf" # rules definition file for pf 151pf_program="/sbin/pfctl" # where the pfctl program lives 152pf_flags="" # additional flags for pfctl 153pflog_enable="NO" # Set to YES to enable packet filter logging 154pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 155pflog_program="/sbin/pflogd" # where the pflogd program lives 156pflog_flags="" # additional flags for pflogd 157pfsync_enable="NO" # Expose pf state to other hosts for syncing 158pfsync_syncdev="" # Interface for pfsync to work through 159pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 160tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 161log_in_vain="0" # >=1 to log connects to ports w/o listeners. 162tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 163# For the following option you need to have TCP_DROP_SYNFIN set in your 164# kernel. Please refer to LINT and NOTES for details. 165tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 166 # NOTE: this violates the TCP specification 167icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 168icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 169network_interfaces="auto" # List of network interfaces (or "auto"). 170cloned_interfaces="" # List of cloned network interfaces to create. 171#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 172ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 173#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 174#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 175#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 176#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 177# 178#autobridge_interfaces="bridge0" # List of bridges to check 179#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 180# 181# If you have any sppp(4) interfaces above, you might also want to set 182# the following parameters. Refer to spppcontrol(8) for their meaning. 183sppp_interfaces="" # List of sppp interfaces. 184#sppp_interfaces="isp0" # example: sppp over ISDN 185#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 186gif_interfaces="" # List of GIF tunnels. 187#gif_interfaces="gif0 gif1" # Examples typically for a router. 188 # Choose correct tunnel addrs. 189#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 190#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 191fec_interfaces="" # List of Fast EtherChannels. 192#fec_interfaces="fec0 fec1" 193#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 194#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 195 196# User ppp configuration. 197ppp_enable="NO" # Start user-ppp (or NO). 198ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 199ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 200 # For details see man page for ppp(8). Default is auto. 201ppp_nat="YES" # Use PPP's internal network address translation or NO. 202ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 203ppp_user="root" # Which user to run ppp as 204 205### Network daemon (miscellaneous) ### 206hostapd_enable="NO" # Run hostap daemon. 207syslogd_enable="YES" # Run syslog daemon (or NO). 208syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 209syslogd_flags="-s" # Flags to syslogd (if enabled). 210inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 211inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 212inetd_flags="-wW -C 60" # Optional flags to inetd 213# 214# named. It may be possible to run named in a sandbox, man security for 215# details. 216# 217named_enable="NO" # Run named, the DNS server (or NO). 218named_program="/usr/sbin/named" # path to named, if you want a different one. 219#named_flags="" # Flags for named 220named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 221named_uid="bind" # User to run named as 222named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 223named_chroot_autoupdate="YES" # Automatically install/update chrooted 224 # components of named. See /etc/rc.d/named. 225named_symlink_enable="YES" # Symlink the chrooted pid file 226 227# 228# kerberos. Do not run the admin daemons on slave servers 229# 230kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 231kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 232kerberos5_server_flags="" # Additional flags to the kerberos 5 server 233kadmind5_server_enable="NO" # Run kadmind (or NO) 234kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 235kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 236kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 237 238rwhod_enable="NO" # Run the rwho daemon (or NO). 239rwhod_flags="" # Flags for rwhod 240rarpd_enable="NO" # Run rarpd (or NO). 241rarpd_flags="" # Flags to rarpd. 242bootparamd_enable="NO" # Run bootparamd (or NO). 243bootparamd_flags="" # Flags to bootparamd 244pppoed_enable="NO" # Run the PPP over Ethernet daemon. 245pppoed_provider="*" # Provider and ppp(8) config file entry. 246pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 247pppoed_interface="fxp0" # The interface that pppoed runs on. 248sshd_enable="NO" # Enable sshd 249sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 250sshd_flags="" # Additional flags for sshd. 251ftpd_enable="NO" # Enable stand-alone ftpd. 252ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 253ftpd_flags="" # Additional flags to stand-alone ftpd. 254 255### Network daemon (NFS): All need rpcbind_enable="YES" ### 256amd_enable="NO" # Run amd service with $amd_flags (or NO). 257amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 258amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 259amd_map_program="NO" # Can be set to "ypcat -k amd.master" 260nfs_client_enable="NO" # This host is an NFS client (or NO). 261nfs_access_cache="60" # Client cache timeout in seconds 262nfs_server_enable="NO" # This host is an NFS server (or NO). 263nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 264idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 265idmapd_flags="" # Additional flags for idmapd. 266mountd_enable="NO" # Run mountd (or NO). 267mountd_flags="-r" # Flags to mountd (if NFS server enabled). 268weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 269nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 270nfs_bufpackets="" # bufspace (in packets) for client 271rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 272rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 273rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 274rpc_statd_flags="" # Flags to rpc.statd (if enabled). 275rpcbind_enable="NO" # Run the portmapper service (YES/NO). 276rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 277rpcbind_flags="" # Flags to rpcbind (if enabled). 278rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 279keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 280keyserv_flags="" # Flags to keyserv (if enabled). 281 282### Network Time Services options: ### 283timed_enable="NO" # Run the time daemon (or NO). 284timed_flags="" # Flags to timed (if enabled). 285ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 286ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 287ntpdate_flags="-b" # Flags to ntpdate (if enabled). 288ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 289ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 290ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 291ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 292ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 293ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 294ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 295 # Flags to ntpd (if enabled). 296 297# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 298nis_client_enable="NO" # We're an NIS client (or NO). 299nis_client_flags="" # Flags to ypbind (if enabled). 300nis_ypset_enable="NO" # Run ypset at boot time (or NO). 301nis_ypset_flags="" # Flags to ypset (if enabled). 302nis_server_enable="NO" # We're an NIS server (or NO). 303nis_server_flags="" # Flags to ypserv (if enabled). 304nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 305nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 306nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 307nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 308 309### SNMP daemon ### 310# Be sure to understand the security implications of running SNMP v1/v2 311# in your network. 312bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 313bsnmpd_flags="" # Flags for bsnmpd. 314 315### Network routing options: ### 316defaultrouter="NO" # Set to default gateway (or NO). 317static_routes="" # Set to static route list (or leave empty). 318natm_static_routes="" # Set to static route list for NATM (or leave empty). 319gateway_enable="NO" # Set to YES if this host will be a gateway. 320router_enable="NO" # Set to YES to enable a routing daemon. 321router="/sbin/routed" # Name of routing daemon to use if enabled. 322router_flags="-q" # Flags for routing daemon. 323mrouted_enable="NO" # Do IPv4 multicast routing. 324mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 325 # routing daemon. You need to 326 # install it from package or 327 # port. 328mrouted_flags="" # Flags for multicast routing daemon. 329ipxgateway_enable="NO" # Set to YES to enable IPX routing. 330ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 331ipxrouted_flags="" # Flags for IPX routing daemon. 332arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 333forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 334accept_sourceroute="NO" # accept source routed packets to us 335 336### ATM interface options: ### 337atm_enable="NO" # Configure ATM interfaces (or NO). 338#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 339#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 340#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 341#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 342#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 343#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 344atm_pvcs="" # Set to PVC list (or leave empty). 345atm_arps="" # Set to permanent ARP list (or leave empty). 346 347### ISDN interface options: (see also: /usr/share/examples/isdn) ### 348isdn_enable="NO" # Enable the ISDN subsystem (or NO). 349isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 350isdn_flags="-dn -d0x1f9" # Flags for isdnd 351isdn_ttype="cons25" # terminal type for fullscreen mode 352isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 353isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 354isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 355 356### Bluetooth ### 357hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 358hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 359 360sdpd_enable="NO" # Enable sdpd(8) (or NO) 361sdpd_control="/var/run/sdp" # sdpd(8) control socket 362sdpd_groupname="nobody" # set spdp(8) user/group to run as after 363sdpd_username="nobody" # it initializes 364 365bthidd_enable="NO" # Enable bthidd(8) (or NO) 366bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 367bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 368 369### Miscellaneous network options: ### 370icmp_bmcastecho="NO" # respond to broadcast ping packets 371 372### IPv6 options: ### 373ipv6_enable="NO" # Set to YES to set up for IPv6. 374ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 375ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 376#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 377ipv6_static_routes="" # Set to static route list (or leave empty). 378#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 379 # route toward loopback interface. 380#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 381ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 382ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 383ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 384ipv6_router_flags="" # Flags to IPv6 routing daemon. 385#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 386 # addrs. 387#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 388 # node, you should stop advertisement. 389#ipv6_network_interfaces="ed0 ep0" # Examples for router 390 # or static configuration for end node. 391 # Choose correct prefix value. 392#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 393#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 394#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 395#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 396ipv6_default_interface="NO" # Default output interface for scoped addrs. 397 # Now this works only for IPv6 link local 398 # multicast addrs. 399rtsol_flags="" # Flags to IPv6 router solicitation. 400rtadvd_enable="NO" # Set to YES to enable an IPv6 router 401 # advertisement daemon. If set to YES, 402 # this router becomes a possible candidate 403 # IPv6 default router for local subnets. 404rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 405mroute6d_enable="NO" # Do IPv6 multicast routing. 406mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 407 # routing daemon. You need to 408 # install it from package or 409 # port. 410mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 411stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 412 # tunneling interface. Specify this entry 413 # to enable 6to4 interface. 414stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 415 # to limit peer addr range. Effective value 416 # is 0-31. 417stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 418 # If you like, you can set "AUTO" for this. 419stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 420ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 421 # IPv6-to-IPv4 TCP translator. You also need 422 # faithd(8) setup. 423ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 424 # communication. (like ::ffff:a.b.c.d) 425ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 426 # functionality 427ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 428ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 429ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 430ipv6_firewall_logging="NO" # Set to YES to enable events logging 431ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 432ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 433 # see /usr/src/contrib/ipfilter/rules 434 # for examples 435ip6addrctl_enable="YES" # Set to YES to enable default address selection 436ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 437 438############################################################## 439### System console options ################################# 440############################################################## 441 442keyboard="" # keyboard device to use (default /dev/kbd0). 443keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 444keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 445keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 446keychange="NO" # function keys default values (or NO). 447cursor="NO" # cursor type {normal|blink|destructive} (or NO). 448scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 449font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 450font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 451font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 452blanktime="300" # blank time (in seconds) or "NO" to turn it off. 453saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 454moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 455 # specifically overriden in rc.conf(5). 456moused_enable="NO" # Run the mouse daemon. 457moused_type="auto" # See man page for rc.conf(5) for available settings. 458moused_port="/dev/psm0" # Set to your mouse port. 459moused_flags="" # Any additional flags to moused. 460mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 461 # language code table, specify alternative range 462 # start like mousechar_start=3, see vidcontrol(1) 463allscreens_flags="" # Set this vidcontrol mode for all virtual screens 464allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 465 466############################################################## 467### Mail Transfer Agent (MTA) options ###################### 468############################################################## 469 470mta_start_script="/etc/rc.sendmail" 471 # Script to start your chosen MTA, called by /etc/rc. 472# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 473sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 474sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 475sendmail_procname="/usr/sbin/sendmail" # sendmail process name 476sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 477sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 478sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 479 # Flags for localhost-only MTA 480sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 481sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 482sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 483sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 484 # Flags for sendmail_msp_queue daemon. 485 486 487############################################################## 488### Miscellaneous administrative options ################### 489############################################################## 490 491auditd_enable="NO" # Run the audit daemon. 492auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 493auditd_flags="" # Which options to pass to the audit daemon. 494cached_enable="NO" # Run the nsswitch caching daemon. 495cron_enable="YES" # Run the periodic job daemon. 496cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 497cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 498cron_flags="" # Which options to pass to the cron daemon. 499lpd_enable="NO" # Run the line printer daemon. 500lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 501lpd_flags="" # Flags to lpd (if enabled). 502chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 503chkprintcap_flags="-d" # Create missing directories by default. 504dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 505dumpdir="/var/crash" # Directory where crash dumps are to be stored 506savecore_flags="" # Used if dumpdev is enabled above, and present. 507enable_quotas="NO" # turn on quotas on startup (or NO). 508check_quotas="YES" # Check quotas on startup (or NO). 509quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 510quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 511quotacheck_flags="-a" # Check all file system quotas (if enabled) 512accounting_enable="NO" # Turn on process accounting (or NO). 513ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 514ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 515 516# Emulation/compatibility services provided by /etc/rc.d/abi 517sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 518linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 519svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 520 521clear_tmp_enable="NO" # Clear /tmp at startup. 522clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 523ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 524ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 525 # shared library search paths 526ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 527ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 528 # a.out shared library search paths 529ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" 530 # Local directories with ldconfig configuration files. 531ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" 532 # Local directories with 32-bit compatibility ldconfig 533 # configuration files. 534kern_securelevel_enable="NO" # kernel security level (see init(8)), 535kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 536 # Note that setting securelevel to 0 will result 537 # in the system booting with securelevel set to 1, as 538 # init(8) will raise the level when rc(8) completes. 539update_motd="YES" # update version info in /etc/motd (or NO) 540entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 541 # /var/db/entropy-file is preferred if / is not avail. 542entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 543entropy_save_sz="2048" # Size of the entropy cache files. 544entropy_save_num="8" # Number of entropy cache files to save. 545harvest_interrupt="YES" # Entropy device harvests interrupt randomness 546harvest_ethernet="YES" # Entropy device harvests ethernet randomness 547harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 548dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 549watchdogd_enable="NO" # Start the software watchdog daemon 550devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 551 # devfs(8) rules. 552devfs_system_ruleset="" # The name of a ruleset to apply to /dev 553devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 554 # apply (must be mounted already, i.e. fstab(5)) 555performance_cx_lowest="HIGH" # Online CPU idle state 556performance_cpu_freq="NONE" # Online CPU frequency 557economy_cx_lowest="HIGH" # Offline CPU idle state 558economy_cpu_freq="NONE" # Offline CPU frequency 559virecover_enable="YES" # Perform housekeeping for the vi(1) editor 560ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 561bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 562 # ruleset file. 563newsyslog_enable="YES" # Run newsyslog at startup. 564newsyslog_flags="-CN" # Newsyslog flags to create marked files 565mixer_enable="YES" # Run the sound mixer. 566 567############################################################## 568### Jail Configuration ####################################### 569############################################################## 570jail_enable="NO" # Set to NO to disable starting of any jails 571jail_list="" # Space separated list of names of jails 572jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 573jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 574jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 575 576# 577# To use rc's built-in jail infrastructure create entries for 578# each jail, specified in jail_list, with the following variables. 579# NOTES: 580# - replace 'example' with the jail's name. 581# - except rootdir, hostname and ip, all of the following variables may be made 582# global jail variables if you don't specify a jail name (ie. jail_interface). 583# 584#jail_example_rootdir="/usr/jail/default" # Jail's root directory 585#jail_example_hostname="default.domain.com" # Jail's hostname 586#jail_example_ip="192.168.0.10" # Jail's IP number 587#jail_example_interface="" # Interface to create the IP alias on 588#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 589#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 590 # starting the jail. More than one can be 591 # specified using a trailing number 592#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 593#jail_example_devfs_enable="NO" # mount devfs in the jail 594#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 595#jail_example_procfs_enable="NO" # mount procfs in jail 596#jail_example_mount_enable="NO" # mount/umount jail's fs 597#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 598#jail_example_fstab="" # fstab(5) for mount/umount 599#jail_example_flags="-l -U root" # flags for jail(8) 600 601############################################################## 602### Define source_rc_confs, the mechanism used by /etc/rc.* ## 603### scripts to source rc_conf_files overrides safely. ## 604############################################################## 605 606if [ -z "${source_rc_confs_defined}" ]; then 607 source_rc_confs_defined=yes 608 source_rc_confs () { 609 local i sourced_files 610 for i in ${rc_conf_files}; do 611 case ${sourced_files} in 612 *:$i:*) 613 ;; 614 *) 615 sourced_files="${sourced_files}:$i:" 616 if [ -r $i ]; then 617 . $i 618 fi 619 ;; 620 esac 621 done 622 } 623fi 624