rc.conf revision 168410
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 168410 2007-04-06 02:27:02Z pjd $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEMS" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 44tmpsize="20m" # Size of mfs /tmp if created 45tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 47varsize="32m" # Size of mfs /var if created 48varmfs_flags="-S" # Extra mount options for the mfs /var 49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 50cleanvar_enable="YES" # Clean the /var directory 51local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 52script_name_sep=" " # Change if your startup scripts' names contain spaces 53rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 54 55# ZFS support 56zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 57 58# Experimental - test before enabling 59gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 60gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 61gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 62gbde_lockdir="/etc" # Where to look for gbde lockfiles 63 64# GELI disk encryption configuration. 65geli_devices="" # List of devices to automatically attach in addition to 66 # GELI devices listed in /etc/fstab. 67geli_tries="" # Number of times to attempt attaching geli device. 68 # If empty, kern.geom.eli.tries will be used. 69geli_default_flags="" # Default flags for geli(8). 70geli_autodetach="YES" # Automatically detach on last close. 71 # Providers are marked as such when all file systems are 72 # mounted. 73# Example use. 74#geli_devices="da1 mirror/home" 75#geli_da1_flags="-p -k /etc/geli/da1.keys" 76#geli_da1_autodetach="NO" 77#geli_mirror_home_flags="-k /etc/geli/home.keys" 78 79geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 80 # swap partitions. 81 82root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 83fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 84background_fsck="YES" # Attempt to run fsck in the background where possible. 85background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 86netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 87extra_netfs_types="NO" # List of network extra filesystem types for delayed 88 # mount at startup (or NO). 89 90############################################################## 91### Network configuration sub-section ###################### 92############################################################## 93 94### Basic network and firewall/security options: ### 95hostname="" # Set this! 96nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 97dhclient_program="/sbin/dhclient" # Path to dhcp client program. 98dhclient_flags="" # Extra flags to pass to dhcp client. 99#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 100background_dhclient="NO" # Start dhcp client in the background. 101#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 102synchronous_dhclient="YES" # Start dhclient directly on configured 103 # interfaces during startup. 104firewall_enable="NO" # Set to YES to enable firewall functionality 105firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 106firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 107firewall_quiet="NO" # Set to YES to suppress rule display 108firewall_logging="NO" # Set to YES to enable events logging 109firewall_flags="" # Flags passed to ipfw when type is a file 110firewall_myservices="" # List of TCP ports on which this host 111 # offers services 112firewall_allowservices="" # List of IPs which has access to 113 # $firewall_myservices 114firewall_trusted="" # List of IPs which has full access to this host 115firewall_logdeny="NO" # Set to YES to log default denied incoming 116 # packets. 117firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 118 # for which denied incoming packets are not 119 # logged. 120ip_portrange_first="NO" # Set first dynamically allocated port 121ip_portrange_last="NO" # Set last dynamically allocated port 122ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 123ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 124ike_flags="" # Additional flags for IKE daemon 125ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 126ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 127natd_program="/sbin/natd" # path to natd, if you want a different one. 128natd_enable="NO" # Enable natd (if firewall_enable == YES). 129natd_interface="" # Public interface or IPaddress to use. 130natd_flags="" # Additional flags for natd. 131ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 132ipfilter_program="/sbin/ipf" # where the ipfilter program lives 133ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 134 # /usr/src/contrib/ipfilter/rules for examples 135ipfilter_flags="" # additional flags for ipfilter 136ipnat_enable="NO" # Set to YES to enable ipnat functionality 137ipnat_program="/sbin/ipnat" # where the ipnat program lives 138ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 139ipnat_flags="" # additional flags for ipnat 140ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 141ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 142ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 143ipfs_enable="NO" # Set to YES to enable saving and restoring 144 # of state tables at shutdown and boot 145ipfs_program="/sbin/ipfs" # where the ipfs program lives 146ipfs_flags="" # additional flags for ipfs 147pf_enable="NO" # Set to YES to enable packet filter (pf) 148pf_rules="/etc/pf.conf" # rules definition file for pf 149pf_program="/sbin/pfctl" # where the pfctl program lives 150pf_flags="" # additional flags for pfctl 151pflog_enable="NO" # Set to YES to enable packet filter logging 152pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 153pflog_program="/sbin/pflogd" # where the pflogd program lives 154pflog_flags="" # additional flags for pflogd 155pfsync_enable="NO" # Expose pf state to other hosts for syncing 156pfsync_syncdev="" # Interface for pfsync to work through 157pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 158tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 159log_in_vain="0" # >=1 to log connects to ports w/o listeners. 160tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 161# For the following option you need to have TCP_DROP_SYNFIN set in your 162# kernel. Please refer to LINT and NOTES for details. 163tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 164 # NOTE: this violates the TCP specification 165icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 166icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 167network_interfaces="auto" # List of network interfaces (or "auto"). 168cloned_interfaces="" # List of cloned network interfaces to create. 169#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 170ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 171#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 172#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 173#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 174#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 175# 176#autobridge_interfaces="bridge0" # List of bridges to check 177#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 178# 179# If you have any sppp(4) interfaces above, you might also want to set 180# the following parameters. Refer to spppcontrol(8) for their meaning. 181sppp_interfaces="" # List of sppp interfaces. 182#sppp_interfaces="isp0" # example: sppp over ISDN 183#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 184gif_interfaces="" # List of GIF tunnels. 185#gif_interfaces="gif0 gif1" # Examples typically for a router. 186 # Choose correct tunnel addrs. 187#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 188#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 189fec_interfaces="" # List of Fast EtherChannels. 190#fec_interfaces="fec0 fec1" 191#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 192#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 193 194# User ppp configuration. 195ppp_enable="NO" # Start user-ppp (or NO). 196ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 197ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 198 # For details see man page for ppp(8). Default is auto. 199ppp_nat="YES" # Use PPP's internal network address translation or NO. 200ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 201ppp_user="root" # Which user to run ppp as 202 203### Network daemon (miscellaneous) ### 204hostapd_enable="NO" # Run hostap daemon. 205syslogd_enable="YES" # Run syslog daemon (or NO). 206syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 207syslogd_flags="-s" # Flags to syslogd (if enabled). 208inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 209inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 210inetd_flags="-wW -C 60" # Optional flags to inetd 211# 212# named. It may be possible to run named in a sandbox, man security for 213# details. 214# 215named_enable="NO" # Run named, the DNS server (or NO). 216named_program="/usr/sbin/named" # path to named, if you want a different one. 217#named_flags="" # Flags for named 218named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 219named_uid="bind" # User to run named as 220named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 221named_chroot_autoupdate="YES" # Automatically install/update chrooted 222 # components of named. See /etc/rc.d/named. 223named_symlink_enable="YES" # Symlink the chrooted pid file 224 225# 226# kerberos. Do not run the admin daemons on slave servers 227# 228kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 229kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 230kerberos5_server_flags="" # Additional flags to the kerberos 5 server 231kadmind5_server_enable="NO" # Run kadmind (or NO) 232kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 233kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 234kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 235 236rwhod_enable="NO" # Run the rwho daemon (or NO). 237rwhod_flags="" # Flags for rwhod 238rarpd_enable="NO" # Run rarpd (or NO). 239rarpd_flags="" # Flags to rarpd. 240bootparamd_enable="NO" # Run bootparamd (or NO). 241bootparamd_flags="" # Flags to bootparamd 242pppoed_enable="NO" # Run the PPP over Ethernet daemon. 243pppoed_provider="*" # Provider and ppp(8) config file entry. 244pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 245pppoed_interface="fxp0" # The interface that pppoed runs on. 246sshd_enable="NO" # Enable sshd 247sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 248sshd_flags="" # Additional flags for sshd. 249ftpd_enable="NO" # Enable stand-alone ftpd. 250ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 251ftpd_flags="" # Additional flags to stand-alone ftpd. 252 253### Network daemon (NFS): All need rpcbind_enable="YES" ### 254amd_enable="NO" # Run amd service with $amd_flags (or NO). 255amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 256amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 257amd_map_program="NO" # Can be set to "ypcat -k amd.master" 258nfs_client_enable="NO" # This host is an NFS client (or NO). 259nfs_access_cache="60" # Client cache timeout in seconds 260nfs_server_enable="NO" # This host is an NFS server (or NO). 261nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 262idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 263idmapd_flags="" # Additional flags for idmapd. 264mountd_enable="NO" # Run mountd (or NO). 265mountd_flags="-r" # Flags to mountd (if NFS server enabled). 266weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 267nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 268nfs_bufpackets="" # bufspace (in packets) for client 269rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 270rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 271rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 272rpc_statd_flags="" # Flags to rpc.statd (if enabled). 273rpcbind_enable="NO" # Run the portmapper service (YES/NO). 274rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 275rpcbind_flags="" # Flags to rpcbind (if enabled). 276rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 277keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 278keyserv_flags="" # Flags to keyserv (if enabled). 279 280### Network Time Services options: ### 281timed_enable="NO" # Run the time daemon (or NO). 282timed_flags="" # Flags to timed (if enabled). 283ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 284ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 285ntpdate_flags="-b" # Flags to ntpdate (if enabled). 286ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 287ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 288ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 289ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 290ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 291ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 292ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 293 # Flags to ntpd (if enabled). 294 295# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 296nis_client_enable="NO" # We're an NIS client (or NO). 297nis_client_flags="" # Flags to ypbind (if enabled). 298nis_ypset_enable="NO" # Run ypset at boot time (or NO). 299nis_ypset_flags="" # Flags to ypset (if enabled). 300nis_server_enable="NO" # We're an NIS server (or NO). 301nis_server_flags="" # Flags to ypserv (if enabled). 302nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 303nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 304nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 305nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 306 307### SNMP daemon ### 308# Be sure to understand the security implications of running SNMP v1/v2 309# in your network. 310bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 311bsnmpd_flags="" # Flags for bsnmpd. 312 313### Network routing options: ### 314defaultrouter="NO" # Set to default gateway (or NO). 315static_routes="" # Set to static route list (or leave empty). 316natm_static_routes="" # Set to static route list for NATM (or leave empty). 317gateway_enable="NO" # Set to YES if this host will be a gateway. 318router_enable="NO" # Set to YES to enable a routing daemon. 319router="/sbin/routed" # Name of routing daemon to use if enabled. 320router_flags="-q" # Flags for routing daemon. 321mrouted_enable="NO" # Do IPv4 multicast routing. 322mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 323 # routing daemon. You need to 324 # install it from package or 325 # port. 326mrouted_flags="" # Flags for multicast routing daemon. 327ipxgateway_enable="NO" # Set to YES to enable IPX routing. 328ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 329ipxrouted_flags="" # Flags for IPX routing daemon. 330arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 331forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 332accept_sourceroute="NO" # accept source routed packets to us 333 334### ATM interface options: ### 335atm_enable="NO" # Configure ATM interfaces (or NO). 336#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 337#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 338#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 339#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 340#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 341#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 342atm_pvcs="" # Set to PVC list (or leave empty). 343atm_arps="" # Set to permanent ARP list (or leave empty). 344 345### ISDN interface options: (see also: /usr/share/examples/isdn) ### 346isdn_enable="NO" # Enable the ISDN subsystem (or NO). 347isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 348isdn_flags="-dn -d0x1f9" # Flags for isdnd 349isdn_ttype="cons25" # terminal type for fullscreen mode 350isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 351isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 352isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 353 354### Bluetooth ### 355hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 356hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 357 358sdpd_enable="NO" # Enable sdpd(8) (or NO) 359sdpd_control="/var/run/sdp" # sdpd(8) control socket 360sdpd_groupname="nobody" # set spdp(8) user/group to run as after 361sdpd_username="nobody" # it initializes 362 363bthidd_enable="NO" # Enable bthidd(8) (or NO) 364bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 365bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 366 367### Miscellaneous network options: ### 368icmp_bmcastecho="NO" # respond to broadcast ping packets 369 370### IPv6 options: ### 371ipv6_enable="NO" # Set to YES to set up for IPv6. 372ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 373ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 374#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 375ipv6_static_routes="" # Set to static route list (or leave empty). 376#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 377 # route toward loopback interface. 378#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 379ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 380ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 381ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 382ipv6_router_flags="" # Flags to IPv6 routing daemon. 383#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 384 # addrs. 385#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 386 # node, you should stop advertisement. 387#ipv6_network_interfaces="ed0 ep0" # Examples for router 388 # or static configuration for end node. 389 # Choose correct prefix value. 390#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 391#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 392#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 393#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 394ipv6_default_interface="NO" # Default output interface for scoped addrs. 395 # Now this works only for IPv6 link local 396 # multicast addrs. 397rtsol_flags="" # Flags to IPv6 router solicitation. 398rtadvd_enable="NO" # Set to YES to enable an IPv6 router 399 # advertisement daemon. If set to YES, 400 # this router becomes a possible candidate 401 # IPv6 default router for local subnets. 402rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 403mroute6d_enable="NO" # Do IPv6 multicast routing. 404mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 405 # routing daemon. You need to 406 # install it from package or 407 # port. 408mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 409stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 410 # tunneling interface. Specify this entry 411 # to enable 6to4 interface. 412stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 413 # to limit peer addr range. Effective value 414 # is 0-31. 415stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 416 # If you like, you can set "AUTO" for this. 417stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 418ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 419 # IPv6-to-IPv4 TCP translator. You also need 420 # faithd(8) setup. 421ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 422 # communication. (like ::ffff:a.b.c.d) 423ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 424 # functionality 425ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 426ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 427ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 428ipv6_firewall_logging="NO" # Set to YES to enable events logging 429ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 430ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 431 # see /usr/src/contrib/ipfilter/rules 432 # for examples 433ip6addrctl_enable="YES" # Set to YES to enable default address selection 434ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 435 436############################################################## 437### System console options ################################# 438############################################################## 439 440keyboard="" # keyboard device to use (default /dev/kbd0). 441keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 442keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 443keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 444keychange="NO" # function keys default values (or NO). 445cursor="NO" # cursor type {normal|blink|destructive} (or NO). 446scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 447font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 448font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 449font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 450blanktime="300" # blank time (in seconds) or "NO" to turn it off. 451saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 452moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 453 # specifically overriden in rc.conf(5). 454moused_enable="NO" # Run the mouse daemon. 455moused_type="auto" # See man page for rc.conf(5) for available settings. 456moused_port="/dev/psm0" # Set to your mouse port. 457moused_flags="" # Any additional flags to moused. 458mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 459 # language code table, specify alternative range 460 # start like mousechar_start=3, see vidcontrol(1) 461allscreens_flags="" # Set this vidcontrol mode for all virtual screens 462allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 463 464############################################################## 465### Mail Transfer Agent (MTA) options ###################### 466############################################################## 467 468mta_start_script="/etc/rc.sendmail" 469 # Script to start your chosen MTA, called by /etc/rc. 470# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 471sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 472sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 473sendmail_procname="/usr/sbin/sendmail" # sendmail process name 474sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 475sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 476sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 477 # Flags for localhost-only MTA 478sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 479sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 480sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 481sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 482 # Flags for sendmail_msp_queue daemon. 483 484 485############################################################## 486### Miscellaneous administrative options ################### 487############################################################## 488 489auditd_enable="NO" # Run the audit daemon. 490auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 491auditd_flags="" # Which options to pass to the audit daemon. 492cached_enable="NO" # Run the nsswitch caching daemon. 493cron_enable="YES" # Run the periodic job daemon. 494cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 495cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 496cron_flags="" # Which options to pass to the cron daemon. 497lpd_enable="NO" # Run the line printer daemon. 498lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 499lpd_flags="" # Flags to lpd (if enabled). 500chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 501chkprintcap_flags="-d" # Create missing directories by default. 502dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 503dumpdir="/var/crash" # Directory where crash dumps are to be stored 504savecore_flags="" # Used if dumpdev is enabled above, and present. 505enable_quotas="NO" # turn on quotas on startup (or NO). 506check_quotas="YES" # Check quotas on startup (or NO). 507quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 508quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 509quotacheck_flags="-a" # Check all file system quotas (if enabled) 510accounting_enable="NO" # Turn on process accounting (or NO). 511ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 512ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 513 514# Emulation/compatibility services provided by /etc/rc.d/abi 515sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 516linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 517svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 518 519clear_tmp_enable="NO" # Clear /tmp at startup. 520clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 521ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 522ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 523 # shared library search paths 524ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 525ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 526 # a.out shared library search paths 527ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" 528 # Local directories with ldconfig configuration files. 529ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" 530 # Local directories with 32-bit compatibility ldconfig 531 # configuration files. 532kern_securelevel_enable="NO" # kernel security level (see init(8)), 533kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 534 # Note that setting securelevel to 0 will result 535 # in the system booting with securelevel set to 1, as 536 # init(8) will raise the level when rc(8) completes. 537update_motd="YES" # update version info in /etc/motd (or NO) 538entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 539 # /var/db/entropy-file is preferred if / is not avail. 540entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 541entropy_save_sz="2048" # Size of the entropy cache files. 542entropy_save_num="8" # Number of entropy cache files to save. 543harvest_interrupt="YES" # Entropy device harvests interrupt randomness 544harvest_ethernet="YES" # Entropy device harvests ethernet randomness 545harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 546dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 547watchdogd_enable="NO" # Start the software watchdog daemon 548devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 549 # devfs(8) rules. 550devfs_system_ruleset="" # The name of a ruleset to apply to /dev 551devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 552 # apply (must be mounted already, i.e. fstab(5)) 553performance_cx_lowest="HIGH" # Online CPU idle state 554performance_cpu_freq="NONE" # Online CPU frequency 555economy_cx_lowest="HIGH" # Offline CPU idle state 556economy_cpu_freq="NONE" # Offline CPU frequency 557virecover_enable="YES" # Perform housekeeping for the vi(1) editor 558ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 559bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 560 # ruleset file. 561newsyslog_enable="YES" # Run newsyslog at startup. 562newsyslog_flags="-CN" # Newsyslog flags to create marked files 563mixer_enable="YES" # Run the sound mixer. 564 565############################################################## 566### Jail Configuration ####################################### 567############################################################## 568jail_enable="NO" # Set to NO to disable starting of any jails 569jail_list="" # Space separated list of names of jails 570jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 571jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 572jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 573 574# 575# To use rc's built-in jail infrastructure create entries for 576# each jail, specified in jail_list, with the following variables. 577# NOTES: 578# - replace 'example' with the jail's name. 579# - except rootdir, hostname and ip, all of the following variables may be made 580# global jail variables if you don't specify a jail name (ie. jail_interface). 581# 582#jail_example_rootdir="/usr/jail/default" # Jail's root directory 583#jail_example_hostname="default.domain.com" # Jail's hostname 584#jail_example_ip="192.168.0.10" # Jail's IP number 585#jail_example_interface="" # Interface to create the IP alias on 586#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 587#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 588 # starting the jail. More than one can be 589 # specified using a trailing number 590#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 591#jail_example_devfs_enable="NO" # mount devfs in the jail 592#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 593#jail_example_procfs_enable="NO" # mount procfs in jail 594#jail_example_mount_enable="NO" # mount/umount jail's fs 595#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 596#jail_example_fstab="" # fstab(5) for mount/umount 597#jail_example_flags="-l -U root" # flags for jail(8) 598 599############################################################## 600### Define source_rc_confs, the mechanism used by /etc/rc.* ## 601### scripts to source rc_conf_files overrides safely. ## 602############################################################## 603 604if [ -z "${source_rc_confs_defined}" ]; then 605 source_rc_confs_defined=yes 606 source_rc_confs () { 607 local i sourced_files 608 for i in ${rc_conf_files}; do 609 case ${sourced_files} in 610 *:$i:*) 611 ;; 612 *) 613 sourced_files="${sourced_files}:$i:" 614 if [ -r $i ]; then 615 . $i 616 fi 617 ;; 618 esac 619 done 620 } 621fi 622