rc.conf revision 168283
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 168283 2007-04-02 22:53:07Z des $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="FILESYSTEM" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 44tmpsize="20m" # Size of mfs /tmp if created 45tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 47varsize="32m" # Size of mfs /var if created 48varmfs_flags="-S" # Extra mount options for the mfs /var 49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 50cleanvar_enable="YES" # Clean the /var directory 51local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 52script_name_sep=" " # Change if your startup scripts' names contain spaces 53rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 54 55# Experimental - test before enabling 56gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 57gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 58gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 59gbde_lockdir="/etc" # Where to look for gbde lockfiles 60 61# GELI disk encryption configuration. 62geli_devices="" # List of devices to automatically attach in addition to 63 # GELI devices listed in /etc/fstab. 64geli_tries="" # Number of times to attempt attaching geli device. 65 # If empty, kern.geom.eli.tries will be used. 66geli_default_flags="" # Default flags for geli(8). 67geli_autodetach="YES" # Automatically detach on last close. 68 # Providers are marked as such when all file systems are 69 # mounted. 70# Example use. 71#geli_devices="da1 mirror/home" 72#geli_da1_flags="-p -k /etc/geli/da1.keys" 73#geli_da1_autodetach="NO" 74#geli_mirror_home_flags="-k /etc/geli/home.keys" 75 76geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 77 # swap partitions. 78 79root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 80fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 81background_fsck="YES" # Attempt to run fsck in the background where possible. 82background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 83netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 84extra_netfs_types="NO" # List of network extra filesystem types for delayed 85 # mount at startup (or NO). 86 87############################################################## 88### Network configuration sub-section ###################### 89############################################################## 90 91### Basic network and firewall/security options: ### 92hostname="" # Set this! 93nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 94dhclient_program="/sbin/dhclient" # Path to dhcp client program. 95dhclient_flags="" # Extra flags to pass to dhcp client. 96#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 97background_dhclient="NO" # Start dhcp client in the background. 98#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 99synchronous_dhclient="YES" # Start dhclient directly on configured 100 # interfaces during startup. 101firewall_enable="NO" # Set to YES to enable firewall functionality 102firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 103firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 104firewall_quiet="NO" # Set to YES to suppress rule display 105firewall_logging="NO" # Set to YES to enable events logging 106firewall_flags="" # Flags passed to ipfw when type is a file 107firewall_myservices="" # List of TCP ports on which this host 108 # offers services 109firewall_allowservices="" # List of IPs which has access to 110 # $firewall_myservices 111firewall_trusted="" # List of IPs which has full access to this host 112firewall_logdeny="NO" # Set to YES to log default denied incoming 113 # packets. 114firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 115 # for which denied incoming packets are not 116 # logged. 117ip_portrange_first="NO" # Set first dynamically allocated port 118ip_portrange_last="NO" # Set last dynamically allocated port 119ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 120ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 121ike_flags="" # Additional flags for IKE daemon 122ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 123ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 124natd_program="/sbin/natd" # path to natd, if you want a different one. 125natd_enable="NO" # Enable natd (if firewall_enable == YES). 126natd_interface="" # Public interface or IPaddress to use. 127natd_flags="" # Additional flags for natd. 128ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 129ipfilter_program="/sbin/ipf" # where the ipfilter program lives 130ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 131 # /usr/src/contrib/ipfilter/rules for examples 132ipfilter_flags="" # additional flags for ipfilter 133ipnat_enable="NO" # Set to YES to enable ipnat functionality 134ipnat_program="/sbin/ipnat" # where the ipnat program lives 135ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 136ipnat_flags="" # additional flags for ipnat 137ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 138ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 139ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 140ipfs_enable="NO" # Set to YES to enable saving and restoring 141 # of state tables at shutdown and boot 142ipfs_program="/sbin/ipfs" # where the ipfs program lives 143ipfs_flags="" # additional flags for ipfs 144pf_enable="NO" # Set to YES to enable packet filter (pf) 145pf_rules="/etc/pf.conf" # rules definition file for pf 146pf_program="/sbin/pfctl" # where the pfctl program lives 147pf_flags="" # additional flags for pfctl 148pflog_enable="NO" # Set to YES to enable packet filter logging 149pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 150pflog_program="/sbin/pflogd" # where the pflogd program lives 151pflog_flags="" # additional flags for pflogd 152pfsync_enable="NO" # Expose pf state to other hosts for syncing 153pfsync_syncdev="" # Interface for pfsync to work through 154pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 155tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 156log_in_vain="0" # >=1 to log connects to ports w/o listeners. 157tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 158# For the following option you need to have TCP_DROP_SYNFIN set in your 159# kernel. Please refer to LINT and NOTES for details. 160tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 161 # NOTE: this violates the TCP specification 162icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 163icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 164network_interfaces="auto" # List of network interfaces (or "auto"). 165cloned_interfaces="" # List of cloned network interfaces to create. 166#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 167ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 168#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 169#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 170#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 171#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 172# 173#autobridge_interfaces="bridge0" # List of bridges to check 174#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 175# 176# If you have any sppp(4) interfaces above, you might also want to set 177# the following parameters. Refer to spppcontrol(8) for their meaning. 178sppp_interfaces="" # List of sppp interfaces. 179#sppp_interfaces="isp0" # example: sppp over ISDN 180#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 181gif_interfaces="" # List of GIF tunnels. 182#gif_interfaces="gif0 gif1" # Examples typically for a router. 183 # Choose correct tunnel addrs. 184#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 185#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 186fec_interfaces="" # List of Fast EtherChannels. 187#fec_interfaces="fec0 fec1" 188#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 189#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 190 191# User ppp configuration. 192ppp_enable="NO" # Start user-ppp (or NO). 193ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 194ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 195 # For details see man page for ppp(8). Default is auto. 196ppp_nat="YES" # Use PPP's internal network address translation or NO. 197ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 198ppp_user="root" # Which user to run ppp as 199 200### Network daemon (miscellaneous) ### 201hostapd_enable="NO" # Run hostap daemon. 202syslogd_enable="YES" # Run syslog daemon (or NO). 203syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 204syslogd_flags="-s" # Flags to syslogd (if enabled). 205inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 206inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 207inetd_flags="-wW -C 60" # Optional flags to inetd 208# 209# named. It may be possible to run named in a sandbox, man security for 210# details. 211# 212named_enable="NO" # Run named, the DNS server (or NO). 213named_program="/usr/sbin/named" # path to named, if you want a different one. 214#named_flags="" # Flags for named 215named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 216named_uid="bind" # User to run named as 217named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 218named_chroot_autoupdate="YES" # Automatically install/update chrooted 219 # components of named. See /etc/rc.d/named. 220named_symlink_enable="YES" # Symlink the chrooted pid file 221 222# 223# kerberos. Do not run the admin daemons on slave servers 224# 225kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 226kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 227kerberos5_server_flags="" # Additional flags to the kerberos 5 server 228kadmind5_server_enable="NO" # Run kadmind (or NO) 229kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 230kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 231kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 232 233rwhod_enable="NO" # Run the rwho daemon (or NO). 234rwhod_flags="" # Flags for rwhod 235rarpd_enable="NO" # Run rarpd (or NO). 236rarpd_flags="" # Flags to rarpd. 237bootparamd_enable="NO" # Run bootparamd (or NO). 238bootparamd_flags="" # Flags to bootparamd 239pppoed_enable="NO" # Run the PPP over Ethernet daemon. 240pppoed_provider="*" # Provider and ppp(8) config file entry. 241pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 242pppoed_interface="fxp0" # The interface that pppoed runs on. 243sshd_enable="NO" # Enable sshd 244sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 245sshd_flags="" # Additional flags for sshd. 246ftpd_enable="NO" # Enable stand-alone ftpd. 247ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 248ftpd_flags="" # Additional flags to stand-alone ftpd. 249 250### Network daemon (NFS): All need rpcbind_enable="YES" ### 251amd_enable="NO" # Run amd service with $amd_flags (or NO). 252amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 253amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 254amd_map_program="NO" # Can be set to "ypcat -k amd.master" 255nfs_client_enable="NO" # This host is an NFS client (or NO). 256nfs_access_cache="60" # Client cache timeout in seconds 257nfs_server_enable="NO" # This host is an NFS server (or NO). 258nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 259idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 260idmapd_flags="" # Additional flags for idmapd. 261mountd_enable="NO" # Run mountd (or NO). 262mountd_flags="-r" # Flags to mountd (if NFS server enabled). 263weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 264nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 265nfs_bufpackets="" # bufspace (in packets) for client 266rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 267rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 268rpcbind_enable="NO" # Run the portmapper service (YES/NO). 269rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 270rpcbind_flags="" # Flags to rpcbind (if enabled). 271rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 272keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 273keyserv_flags="" # Flags to keyserv (if enabled). 274 275### Network Time Services options: ### 276timed_enable="NO" # Run the time daemon (or NO). 277timed_flags="" # Flags to timed (if enabled). 278ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 279ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 280ntpdate_flags="-b" # Flags to ntpdate (if enabled). 281ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 282ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 283ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 284ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 285ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 286ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 287ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 288 # Flags to ntpd (if enabled). 289 290# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 291nis_client_enable="NO" # We're an NIS client (or NO). 292nis_client_flags="" # Flags to ypbind (if enabled). 293nis_ypset_enable="NO" # Run ypset at boot time (or NO). 294nis_ypset_flags="" # Flags to ypset (if enabled). 295nis_server_enable="NO" # We're an NIS server (or NO). 296nis_server_flags="" # Flags to ypserv (if enabled). 297nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 298nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 299nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 300nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 301 302### SNMP daemon ### 303# Be sure to understand the security implications of running SNMP v1/v2 304# in your network. 305bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 306bsnmpd_flags="" # Flags for bsnmpd. 307 308### Network routing options: ### 309defaultrouter="NO" # Set to default gateway (or NO). 310static_routes="" # Set to static route list (or leave empty). 311natm_static_routes="" # Set to static route list for NATM (or leave empty). 312gateway_enable="NO" # Set to YES if this host will be a gateway. 313router_enable="NO" # Set to YES to enable a routing daemon. 314router="/sbin/routed" # Name of routing daemon to use if enabled. 315router_flags="-q" # Flags for routing daemon. 316mrouted_enable="NO" # Do IPv4 multicast routing. 317mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 318 # routing daemon. You need to 319 # install it from package or 320 # port. 321mrouted_flags="" # Flags for multicast routing daemon. 322ipxgateway_enable="NO" # Set to YES to enable IPX routing. 323ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 324ipxrouted_flags="" # Flags for IPX routing daemon. 325arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 326forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 327accept_sourceroute="NO" # accept source routed packets to us 328 329### ATM interface options: ### 330atm_enable="NO" # Configure ATM interfaces (or NO). 331#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 332#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 333#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 334#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 335#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 336#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 337atm_pvcs="" # Set to PVC list (or leave empty). 338atm_arps="" # Set to permanent ARP list (or leave empty). 339 340### ISDN interface options: (see also: /usr/share/examples/isdn) ### 341isdn_enable="NO" # Enable the ISDN subsystem (or NO). 342isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 343isdn_flags="-dn -d0x1f9" # Flags for isdnd 344isdn_ttype="cons25" # terminal type for fullscreen mode 345isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 346isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 347isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 348 349### Bluetooth ### 350hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 351hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 352 353sdpd_enable="NO" # Enable sdpd(8) (or NO) 354sdpd_control="/var/run/sdp" # sdpd(8) control socket 355sdpd_groupname="nobody" # set spdp(8) user/group to run as after 356sdpd_username="nobody" # it initializes 357 358bthidd_enable="NO" # Enable bthidd(8) (or NO) 359bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 360bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 361 362### Miscellaneous network options: ### 363icmp_bmcastecho="NO" # respond to broadcast ping packets 364 365### IPv6 options: ### 366ipv6_enable="NO" # Set to YES to set up for IPv6. 367ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 368ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 369#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 370ipv6_static_routes="" # Set to static route list (or leave empty). 371#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 372 # route toward loopback interface. 373#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 374ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 375ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 376ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 377ipv6_router_flags="" # Flags to IPv6 routing daemon. 378#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 379 # addrs. 380#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 381 # node, you should stop advertisement. 382#ipv6_network_interfaces="ed0 ep0" # Examples for router 383 # or static configuration for end node. 384 # Choose correct prefix value. 385#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 386#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 387#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 388#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 389ipv6_default_interface="NO" # Default output interface for scoped addrs. 390 # Now this works only for IPv6 link local 391 # multicast addrs. 392rtsol_flags="" # Flags to IPv6 router solicitation. 393rtadvd_enable="NO" # Set to YES to enable an IPv6 router 394 # advertisement daemon. If set to YES, 395 # this router becomes a possible candidate 396 # IPv6 default router for local subnets. 397rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 398mroute6d_enable="NO" # Do IPv6 multicast routing. 399mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 400 # routing daemon. You need to 401 # install it from package or 402 # port. 403mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 404stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 405 # tunneling interface. Specify this entry 406 # to enable 6to4 interface. 407stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 408 # to limit peer addr range. Effective value 409 # is 0-31. 410stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 411 # If you like, you can set "AUTO" for this. 412stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 413ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 414 # IPv6-to-IPv4 TCP translator. You also need 415 # faithd(8) setup. 416ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 417 # communication. (like ::ffff:a.b.c.d) 418ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 419 # functionality 420ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 421ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 422ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 423ipv6_firewall_logging="NO" # Set to YES to enable events logging 424ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 425ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 426 # see /usr/src/contrib/ipfilter/rules 427 # for examples 428ip6addrctl_enable="YES" # Set to YES to enable default address selection 429ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 430 431############################################################## 432### System console options ################################# 433############################################################## 434 435keyboard="" # keyboard device to use (default /dev/kbd0). 436keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 437keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 438keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 439keychange="NO" # function keys default values (or NO). 440cursor="NO" # cursor type {normal|blink|destructive} (or NO). 441scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 442font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 443font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 444font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 445blanktime="300" # blank time (in seconds) or "NO" to turn it off. 446saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 447moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 448 # specifically overriden in rc.conf(5). 449moused_enable="NO" # Run the mouse daemon. 450moused_type="auto" # See man page for rc.conf(5) for available settings. 451moused_port="/dev/psm0" # Set to your mouse port. 452moused_flags="" # Any additional flags to moused. 453mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 454 # language code table, specify alternative range 455 # start like mousechar_start=3, see vidcontrol(1) 456allscreens_flags="" # Set this vidcontrol mode for all virtual screens 457allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 458 459############################################################## 460### Mail Transfer Agent (MTA) options ###################### 461############################################################## 462 463mta_start_script="/etc/rc.sendmail" 464 # Script to start your chosen MTA, called by /etc/rc. 465# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 466sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 467sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 468sendmail_procname="/usr/sbin/sendmail" # sendmail process name 469sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 470sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 471sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 472 # Flags for localhost-only MTA 473sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 474sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 475sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 476sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 477 # Flags for sendmail_msp_queue daemon. 478 479 480############################################################## 481### Miscellaneous administrative options ################### 482############################################################## 483 484auditd_enable="NO" # Run the audit daemon. 485auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 486auditd_flags="" # Which options to pass to the audit daemon. 487cached_enable="NO" # Run the nsswitch caching daemon. 488cron_enable="YES" # Run the periodic job daemon. 489cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 490cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 491cron_flags="" # Which options to pass to the cron daemon. 492lpd_enable="NO" # Run the line printer daemon. 493lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 494lpd_flags="" # Flags to lpd (if enabled). 495chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 496chkprintcap_flags="-d" # Create missing directories by default. 497dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 498dumpdir="/var/crash" # Directory where crash dumps are to be stored 499savecore_flags="" # Used if dumpdev is enabled above, and present. 500enable_quotas="NO" # turn on quotas on startup (or NO). 501check_quotas="YES" # Check quotas on startup (or NO). 502quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 503quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 504quotacheck_flags="-a" # Check all file system quotas (if enabled) 505accounting_enable="NO" # Turn on process accounting (or NO). 506ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 507ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 508 509# Emulation/compatibility services provided by /etc/rc.d/abi 510sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 511linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 512svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 513 514clear_tmp_enable="NO" # Clear /tmp at startup. 515clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 516ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 517ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 518 # shared library search paths 519ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 520ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 521 # a.out shared library search paths 522ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" 523 # Local directories with ldconfig configuration files. 524ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" 525 # Local directories with 32-bit compatibility ldconfig 526 # configuration files. 527kern_securelevel_enable="NO" # kernel security level (see init(8)), 528kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 529 # Note that setting securelevel to 0 will result 530 # in the system booting with securelevel set to 1, as 531 # init(8) will raise the level when rc(8) completes. 532update_motd="YES" # update version info in /etc/motd (or NO) 533entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 534 # /var/db/entropy-file is preferred if / is not avail. 535entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 536entropy_save_sz="2048" # Size of the entropy cache files. 537entropy_save_num="8" # Number of entropy cache files to save. 538harvest_interrupt="YES" # Entropy device harvests interrupt randomness 539harvest_ethernet="YES" # Entropy device harvests ethernet randomness 540harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 541dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 542watchdogd_enable="NO" # Start the software watchdog daemon 543devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 544 # devfs(8) rules. 545devfs_system_ruleset="" # The name of a ruleset to apply to /dev 546devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 547 # apply (must be mounted already, i.e. fstab(5)) 548performance_cx_lowest="HIGH" # Online CPU idle state 549performance_cpu_freq="NONE" # Online CPU frequency 550economy_cx_lowest="HIGH" # Offline CPU idle state 551economy_cpu_freq="NONE" # Offline CPU frequency 552virecover_enable="YES" # Perform housekeeping for the vi(1) editor 553ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 554bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 555 # ruleset file. 556newsyslog_enable="YES" # Run newsyslog at startup. 557newsyslog_flags="-CN" # Newsyslog flags to create marked files 558mixer_enable="YES" # Run the sound mixer. 559 560############################################################## 561### Jail Configuration ####################################### 562############################################################## 563jail_enable="NO" # Set to NO to disable starting of any jails 564jail_list="" # Space separated list of names of jails 565jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 566jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 567jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 568 569# 570# To use rc's built-in jail infrastructure create entries for 571# each jail, specified in jail_list, with the following variables. 572# NOTES: 573# - replace 'example' with the jail's name. 574# - except rootdir, hostname and ip, all of the following variables may be made 575# global jail variables if you don't specify a jail name (ie. jail_interface). 576# 577#jail_example_rootdir="/usr/jail/default" # Jail's root directory 578#jail_example_hostname="default.domain.com" # Jail's hostname 579#jail_example_ip="192.168.0.10" # Jail's IP number 580#jail_example_interface="" # Interface to create the IP alias on 581#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 582#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 583 # starting the jail. More than one can be 584 # specified using a trailing number 585#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 586#jail_example_devfs_enable="NO" # mount devfs in the jail 587#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 588#jail_example_procfs_enable="NO" # mount procfs in jail 589#jail_example_mount_enable="NO" # mount/umount jail's fs 590#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 591#jail_example_fstab="" # fstab(5) for mount/umount 592#jail_example_flags="-l -U root" # flags for jail(8) 593 594############################################################## 595### Define source_rc_confs, the mechanism used by /etc/rc.* ## 596### scripts to source rc_conf_files overrides safely. ## 597############################################################## 598 599if [ -z "${source_rc_confs_defined}" ]; then 600 source_rc_confs_defined=yes 601 source_rc_confs () { 602 local i sourced_files 603 for i in ${rc_conf_files}; do 604 case ${sourced_files} in 605 *:$i:*) 606 ;; 607 *) 608 sourced_files="${sourced_files}:$i:" 609 if [ -r $i ]; then 610 . $i 611 fi 612 ;; 613 esac 614 done 615 } 616fi 617