rc.conf revision 163378
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 163378 2006-10-15 14:19:06Z ceri $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="mountcritlocal" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 44tmpsize="20m" # Size of mfs /tmp if created 45tmpmfs_flags="-S -M" # Extra mdmfs options for the mfs /tmp 46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 47varsize="32m" # Size of mfs /var if created 48varmfs_flags="-S -M" # Extra mount options for the mfs /var 49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 50cleanvar_enable="YES" # Clean the /var directory 51local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 52script_name_sep=" " # Change if your startup scripts' names contain spaces 53rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 54 55# Experimental - test before enabling 56gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 57gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 58gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 59gbde_lockdir="/etc" # Where to look for gbde lockfiles 60 61# GELI disk encryption configuration. 62geli_devices="" # List of devices to automatically attach in addition to 63 # GELI devices listed in /etc/fstab. 64geli_tries="" # Number of times to attempt attaching geli device. 65 # If empty, kern.geom.eli.tries will be used. 66geli_default_flags="" # Default flags for geli(8). 67geli_autodetach="YES" # Automatically detach on last close. 68 # Providers are marked as such when all file systems are 69 # mounted. 70# Example use. 71#geli_devices="da1 mirror/home" 72#geli_da1_flags="-p -k /etc/geli/da1.keys" 73#geli_da1_autodetach="NO" 74#geli_mirror_home_flags="-k /etc/geli/home.keys" 75 76geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 77 # swap partitions. 78 79root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 80fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 81background_fsck="YES" # Attempt to run fsck in the background where possible. 82background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 83netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 84extra_netfs_types="NO" # List of network extra filesystem types for delayed 85 # mount at startup (or NO). 86 87############################################################## 88### Network configuration sub-section ###################### 89############################################################## 90 91### Basic network and firewall/security options: ### 92hostname="" # Set this! 93nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 94dhclient_program="/sbin/dhclient" # Path to dhcp client program. 95dhclient_flags="" # Extra flags to pass to dhcp client. 96dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 97background_dhclient="NO" # Start dhcp client in the background. 98background_dhclient_fxp0="" # Start dhcp client on fxp0 in the background. 99synchronous_dhclient="YES" # Start dhclient directly on configured 100 # interfaces during startup. 101firewall_enable="NO" # Set to YES to enable firewall functionality 102firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 103firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 104firewall_quiet="NO" # Set to YES to suppress rule display 105firewall_logging="NO" # Set to YES to enable events logging 106firewall_flags="" # Flags passed to ipfw when type is a file 107ip_portrange_first="NO" # Set first dynamically allocated port 108ip_portrange_last="NO" # Set last dynamically allocated port 109ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 110ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 111ike_flags="" # Additional flags for IKE daemon 112ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 113ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 114natd_program="/sbin/natd" # path to natd, if you want a different one. 115natd_enable="NO" # Enable natd (if firewall_enable == YES). 116natd_interface="" # Public interface or IPaddress to use. 117natd_flags="" # Additional flags for natd. 118ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 119ipfilter_program="/sbin/ipf" # where the ipfilter program lives 120ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 121 # /usr/src/contrib/ipfilter/rules for examples 122ipfilter_flags="" # additional flags for ipfilter 123ipnat_enable="NO" # Set to YES to enable ipnat functionality 124ipnat_program="/sbin/ipnat" # where the ipnat program lives 125ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 126ipnat_flags="" # additional flags for ipnat 127ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 128ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 129ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 130ipfs_enable="NO" # Set to YES to enable saving and restoring 131 # of state tables at shutdown and boot 132ipfs_program="/sbin/ipfs" # where the ipfs program lives 133ipfs_flags="" # additional flags for ipfs 134pf_enable="NO" # Set to YES to enable packet filter (pf) 135pf_rules="/etc/pf.conf" # rules definition file for pf 136pf_program="/sbin/pfctl" # where the pfctl program lives 137pf_flags="" # additional flags for pfctl 138pflog_enable="NO" # Set to YES to enable packet filter logging 139pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 140pflog_program="/sbin/pflogd" # where the pflogd program lives 141pflog_flags="" # additional flags for pflogd 142pfsync_enable="NO" # Expose pf state to other hosts for syncing 143pfsync_syncdev="" # Interface for pfsync to work through 144pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 145tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 146log_in_vain="0" # >=1 to log connects to ports w/o listeners. 147tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 148# For the following option you need to have TCP_DROP_SYNFIN set in your 149# kernel. Please refer to LINT and NOTES for details. 150tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 151 # NOTE: this violates the TCP specification 152icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 153icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 154network_interfaces="auto" # List of network interfaces (or "auto"). 155cloned_interfaces="" # List of cloned network interfaces to create. 156#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 157ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 158#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 159#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 160#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 161#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 162# 163#autobridge_interfaces="bridge0" # List of bridges to check 164#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 165# 166# If you have any sppp(4) interfaces above, you might also want to set 167# the following parameters. Refer to spppcontrol(8) for their meaning. 168sppp_interfaces="" # List of sppp interfaces. 169#sppp_interfaces="isp0" # example: sppp over ISDN 170#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 171gif_interfaces="NO" # List of GIF tunnels (or "NO"). 172#gif_interfaces="gif0 gif1" # Examples typically for a router. 173 # Choose correct tunnel addrs. 174#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 175#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 176 177# User ppp configuration. 178ppp_enable="NO" # Start user-ppp (or NO). 179ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 180ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 181 # For details see man page for ppp(8). Default is auto. 182ppp_nat="YES" # Use PPP's internal network address translation or NO. 183ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 184ppp_user="root" # Which user to run ppp as 185 186### Network daemon (miscellaneous) ### 187hostapd_enable="NO" # Run hostap daemon. 188syslogd_enable="YES" # Run syslog daemon (or NO). 189syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 190syslogd_flags="-s" # Flags to syslogd (if enabled). 191inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 192inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 193inetd_flags="-wW -C 60" # Optional flags to inetd 194# 195# named. It may be possible to run named in a sandbox, man security for 196# details. 197# 198named_enable="NO" # Run named, the DNS server (or NO). 199named_program="/usr/sbin/named" # path to named, if you want a different one. 200#named_flags="" # Flags for named 201named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 202named_uid="bind" # User to run named as 203named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 204named_chroot_autoupdate="YES" # Automatically install/update chrooted 205 # components of named. See /etc/rc.d/named. 206named_symlink_enable="YES" # Symlink the chrooted pid file 207 208# 209# kerberos. Do not run the admin daemons on slave servers 210# 211kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 212kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 213kerberos5_server_flags="" # Additional flags to the kerberos 5 server 214kadmind5_server_enable="NO" # Run kadmind (or NO) 215kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 216kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 217kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 218 219rwhod_enable="NO" # Run the rwho daemon (or NO). 220rwhod_flags="" # Flags for rwhod 221rarpd_enable="NO" # Run rarpd (or NO). 222rarpd_flags="" # Flags to rarpd. 223bootparamd_enable="NO" # Run bootparamd (or NO). 224bootparamd_flags="" # Flags to bootparamd 225pppoed_enable="NO" # Run the PPP over Ethernet daemon. 226pppoed_provider="*" # Provider and ppp(8) config file entry. 227pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 228pppoed_interface="fxp0" # The interface that pppoed runs on. 229sshd_enable="NO" # Enable sshd 230sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 231sshd_flags="" # Additional flags for sshd. 232ftpd_enable="NO" # Enable stand-alone ftpd. 233ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 234ftpd_flags="" # Additional flags to stand-alone ftpd. 235 236### Network daemon (NFS): All need rpcbind_enable="YES" ### 237amd_enable="NO" # Run amd service with $amd_flags (or NO). 238amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 239amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 240amd_map_program="NO" # Can be set to "ypcat -k amd.master" 241nfs_client_enable="NO" # This host is an NFS client (or NO). 242nfs_access_cache="60" # Client cache timeout in seconds 243nfs_server_enable="NO" # This host is an NFS server (or NO). 244nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 245idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). 246mountd_enable="NO" # Run mountd (or NO). 247mountd_flags="-r" # Flags to mountd (if NFS server enabled). 248weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 249nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 250nfs_bufpackets="" # bufspace (in packets) for client 251rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 252rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 253rpcbind_enable="NO" # Run the portmapper service (YES/NO). 254rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 255rpcbind_flags="" # Flags to rpcbind (if enabled). 256rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 257keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 258keyserv_flags="" # Flags to keyserv (if enabled). 259 260### Network Time Services options: ### 261timed_enable="NO" # Run the time daemon (or NO). 262timed_flags="" # Flags to timed (if enabled). 263ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 264ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 265ntpdate_flags="-b" # Flags to ntpdate (if enabled). 266ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 267ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 268ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 269ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 270ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 271ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 272ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 273 # Flags to ntpd (if enabled). 274 275# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 276nis_client_enable="NO" # We're an NIS client (or NO). 277nis_client_flags="" # Flags to ypbind (if enabled). 278nis_ypset_enable="NO" # Run ypset at boot time (or NO). 279nis_ypset_flags="" # Flags to ypset (if enabled). 280nis_server_enable="NO" # We're an NIS server (or NO). 281nis_server_flags="" # Flags to ypserv (if enabled). 282nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 283nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 284nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 285nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 286 287### SNMP daemon ### 288# Be sure to understand the security implications of running SNMP v1/v2 289# in your network. 290bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 291bsnmpd_flags="" # Flags for bsnmpd. 292 293### Network routing options: ### 294defaultrouter="NO" # Set to default gateway (or NO). 295static_routes="" # Set to static route list (or leave empty). 296natm_static_routes="" # Set to static route list for NATM (or leave empty). 297gateway_enable="NO" # Set to YES if this host will be a gateway. 298router_enable="NO" # Set to YES to enable a routing daemon. 299router="/sbin/routed" # Name of routing daemon to use if enabled. 300router_flags="-q" # Flags for routing daemon. 301mrouted_enable="NO" # Do IPv4 multicast routing. 302mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 303 # routing daemon. You need to 304 # install it from package or 305 # port. 306mrouted_flags="" # Flags for multicast routing daemon. 307ipxgateway_enable="NO" # Set to YES to enable IPX routing. 308ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 309ipxrouted_flags="" # Flags for IPX routing daemon. 310arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 311forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 312accept_sourceroute="NO" # accept source routed packets to us 313 314### ATM interface options: ### 315atm_enable="NO" # Configure ATM interfaces (or NO). 316#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 317#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 318#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 319#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 320#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 321#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 322atm_pvcs="" # Set to PVC list (or leave empty). 323atm_arps="" # Set to permanent ARP list (or leave empty). 324 325### ISDN interface options: (see also: /usr/share/examples/isdn) ### 326isdn_enable="NO" # Enable the ISDN subsystem (or NO). 327isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 328isdn_flags="-dn -d0x1f9" # Flags for isdnd 329isdn_ttype="cons25" # terminal type for fullscreen mode 330isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 331isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 332isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 333 334### Bluetooth ### 335hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 336hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 337 338sdpd_enable="NO" # Enable sdpd(8) (or NO) 339sdpd_control="/var/run/sdp" # sdpd(8) control socket 340sdpd_groupname="nobody" # set spdp(8) user/group to run as after 341sdpd_username="nobody" # it initializes 342 343bthidd_enable="NO" # Enable bthidd(8) (or NO) 344bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 345bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 346 347### Miscellaneous network options: ### 348icmp_bmcastecho="NO" # respond to broadcast ping packets 349 350### IPv6 options: ### 351ipv6_enable="NO" # Set to YES to set up for IPv6. 352ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 353ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 354#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 355ipv6_static_routes="" # Set to static route list (or leave empty). 356#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 357 # route toward loopback interface. 358#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 359ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 360ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 361ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 362ipv6_router_flags="" # Flags to IPv6 routing daemon. 363#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 364 # addrs. 365#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 366 # node, you should stop advertisement. 367#ipv6_network_interfaces="ed0 ep0" # Examples for router 368 # or static configuration for end node. 369 # Choose correct prefix value. 370#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 371#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 372#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 373#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 374ipv6_default_interface="NO" # Default output interface for scoped addrs. 375 # Now this works only for IPv6 link local 376 # multicast addrs. 377rtsol_flags="" # Flags to IPv6 router solicitation. 378rtadvd_enable="NO" # Set to YES to enable an IPv6 router 379 # advertisement daemon. If set to YES, 380 # this router becomes a possible candidate 381 # IPv6 default router for local subnets. 382rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 383mroute6d_enable="NO" # Do IPv6 multicast routing. 384mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 385 # routing daemon. You need to 386 # install it from package or 387 # port. 388mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 389stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 390 # tunneling interface. Specify this entry 391 # to enable 6to4 interface. 392stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 393 # to limit peer addr range. Effective value 394 # is 0-31. 395stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 396 # If you like, you can set "AUTO" for this. 397stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 398ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 399 # IPv6-to-IPv4 TCP translator. You also need 400 # faithd(8) setup. 401ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 402 # communication. (like ::ffff:a.b.c.d) 403ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 404 # functionality 405ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 406ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 407ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 408ipv6_firewall_logging="NO" # Set to YES to enable events logging 409ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 410ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 411 # see /usr/src/contrib/ipfilter/rules 412 # for examples 413ip6addrctl_enable="NO" # Set to YES to enable default address selection 414ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 415 416############################################################## 417### System console options ################################# 418############################################################## 419 420keyboard="" # keyboard device to use (default /dev/kbd0). 421keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 422keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 423keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 424keychange="NO" # function keys default values (or NO). 425cursor="NO" # cursor type {normal|blink|destructive} (or NO). 426scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 427font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 428font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 429font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 430blanktime="300" # blank time (in seconds) or "NO" to turn it off. 431saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 432moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 433 # specifically overriden in rc.conf(5). 434moused_enable="NO" # Run the mouse daemon. 435moused_type="auto" # See man page for rc.conf(5) for available settings. 436moused_port="/dev/psm0" # Set to your mouse port. 437moused_flags="" # Any additional flags to moused. 438mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 439 # language code table, specify alternative range 440 # start like mousechar_start=3, see vidcontrol(1) 441allscreens_flags="" # Set this vidcontrol mode for all virtual screens 442allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 443 444############################################################## 445### Mail Transfer Agent (MTA) options ###################### 446############################################################## 447 448mta_start_script="/etc/rc.sendmail" 449 # Script to start your chosen MTA, called by /etc/rc. 450# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 451sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 452sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 453sendmail_procname="/usr/sbin/sendmail" # sendmail process name 454sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 455sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 456sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 457 # Flags for localhost-only MTA 458sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 459sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 460sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 461sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 462 # Flags for sendmail_msp_queue daemon. 463 464 465############################################################## 466### Miscellaneous administrative options ################### 467############################################################## 468 469auditd_enable="NO" # Run the audit daemon. 470auditd_flags="" # Which options to pass to the audit daemon. 471cached_enable="NO" # Run the nsswitch caching daemon. 472cron_enable="YES" # Run the periodic job daemon. 473cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 474cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 475cron_flags="" # Which options to pass to the cron daemon. 476lpd_enable="NO" # Run the line printer daemon. 477lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 478lpd_flags="" # Flags to lpd (if enabled). 479chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 480chkprintcap_flags="-d" # Create missing directories by default. 481dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 482dumpdir="/var/crash" # Directory where crash dumps are to be stored 483savecore_flags="" # Used if dumpdev is enabled above, and present. 484enable_quotas="NO" # turn on quotas on startup (or NO). 485check_quotas="YES" # Check quotas on startup (or NO). 486accounting_enable="NO" # Turn on process accounting (or NO). 487ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 488ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 489 490# Emulation/compatibility services provided by /etc/rc.d/abi 491sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 492linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 493svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 494 495clear_tmp_enable="NO" # Clear /tmp at startup. 496clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 497ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 498ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 499 # shared library search paths 500ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 501ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 502 # a.out shared library search paths 503ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" 504 # Local directories with ldconfig configuration files. 505ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" 506 # Local directories with 32-bit compatibility ldconfig 507 # configuration files. 508kern_securelevel_enable="NO" # kernel security level (see init(8)), 509kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 510 # Note that setting securelevel to 0 will result 511 # in the system booting with securelevel set to 1, as 512 # init(8) will raise the level when rc(8) completes. 513update_motd="YES" # update version info in /etc/motd (or NO) 514entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 515 # /var/db/entropy-file is preferred if / is not avail. 516entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 517entropy_save_sz="2048" # Size of the entropy cache files. 518entropy_save_num="8" # Number of entropy cache files to save. 519harvest_interrupt="YES" # Entropy device harvests interrupt randomness 520harvest_ethernet="YES" # Entropy device harvests ethernet randomness 521harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 522dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 523watchdogd_enable="NO" # Start the software watchdog daemon 524devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 525 # devfs(8) rules. 526devfs_system_ruleset="" # The name of a ruleset to apply to /dev 527devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 528 # apply (must be mounted already, i.e. fstab(5)) 529performance_cx_lowest="HIGH" # Online CPU idle state 530performance_cpu_freq="NONE" # Online CPU frequency 531economy_cx_lowest="HIGH" # Offline CPU idle state 532economy_cpu_freq="NONE" # Offline CPU frequency 533virecover_enable="YES" # Perform housekeeping for the vi(1) editor 534ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 535bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 536 # ruleset file. 537newsyslog_enable="YES" # Run newsyslog at startup. 538newsyslog_flags="-CN" # Newsyslog flags to create marked files 539mixer_enable="YES" # Run the sound mixer. 540 541############################################################## 542### Jail Configuration ####################################### 543############################################################## 544jail_enable="NO" # Set to NO to disable starting of any jails 545jail_list="" # Space separated list of names of jails 546jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 547jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 548jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 549 550# 551# To use rc's built-in jail infrastructure create entries for 552# each jail, specified in jail_list, with the following variables. 553# NOTES: 554# - replace 'example' with the jail's name. 555# - except rootdir, hostname and ip, all of the following variables may be made 556# global jail variables if you don't specify a jail name (ie. jail_interface). 557# 558#jail_example_rootdir="/usr/jail/default" # Jail's root directory 559#jail_example_hostname="default.domain.com" # Jail's hostname 560#jail_example_ip="192.168.0.10" # Jail's IP number 561#jail_example_interface="" # Interface to create the IP alias on 562#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 563#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 564 # starting the jail. More than one can be 565 # specified using a trailing number 566#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 567#jail_example_devfs_enable="NO" # mount devfs in the jail 568#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 569#jail_example_procfs_enable="NO" # mount procfs in jail 570#jail_example_mount_enable="NO" # mount/umount jail's fs 571#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 572#jail_example_fstab="" # fstab(5) for mount/umount 573#jail_example_flags="-l -U root" # flags for jail(8) 574 575############################################################## 576### Define source_rc_confs, the mechanism used by /etc/rc.* ## 577### scripts to source rc_conf_files overrides safely. ## 578############################################################## 579 580if [ -z "${source_rc_confs_defined}" ]; then 581 source_rc_confs_defined=yes 582 source_rc_confs () { 583 local i sourced_files 584 for i in ${rc_conf_files}; do 585 case ${sourced_files} in 586 *:$i:*) 587 ;; 588 *) 589 sourced_files="${sourced_files}:$i:" 590 if [ -r $i ]; then 591 . $i 592 fi 593 ;; 594 esac 595 done 596 } 597fi 598