rc.conf revision 161418
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 161418 2006-08-17 20:13:24Z brian $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="mountcritlocal" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43removable_route_flush="NO" # Flush routes when removing an interface 44tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 45tmpsize="20m" # Size of mfs /tmp if created 46tmpmfs_flags="-S -M" # Extra mdmfs options for the mfs /tmp 47varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 48varsize="32m" # Size of mfs /var if created 49varmfs_flags="-S -M" # Extra mount options for the mfs /var 50populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 51cleanvar_enable="YES" # Clean the /var directory 52local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 53script_name_sep=" " # Change if your startup scripts' names contain spaces 54rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 55 56# Experimental - test before enabling 57gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 58gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 59gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 60gbde_lockdir="/etc" # Where to look for gbde lockfiles 61 62# GELI disk encryption configuration. 63geli_devices="" # List of devices to automatically attach in addition to 64 # GELI devices listed in /etc/fstab. 65geli_tries="" # Number of times to attempt attaching geli device. 66 # If empty, kern.geom.eli.tries will be used. 67geli_default_flags="" # Default flags for geli(8). 68geli_autodetach="YES" # Automatically detach on last close. 69 # Providers are marked as such when all file systems are 70 # mounted. 71# Example use. 72#geli_devices="da1 mirror/home" 73#geli_da1_flags="-p -k /etc/geli/da1.keys" 74#geli_da1_autodetach="NO" 75#geli_mirror_home_flags="-k /etc/geli/home.keys" 76 77geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted 78 # swap partitions. 79 80root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 81fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 82background_fsck="YES" # Attempt to run fsck in the background where possible. 83background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 84netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 85extra_netfs_types="NO" # List of network extra filesystem types for delayed 86 # mount at startup (or NO). 87 88############################################################## 89### Network configuration sub-section ###################### 90############################################################## 91 92### Basic network and firewall/security options: ### 93hostname="" # Set this! 94nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 95dhclient_program="/sbin/dhclient" # Path to dhcp client program. 96dhclient_flags="" # Extra flags to pass to dhcp client. 97dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 98background_dhclient="NO" # Start dhcp client in the background. 99background_dhclient_fxp0="" # Start dhcp client on fxp0 in the background. 100synchronous_dhclient="YES" # Start dhclient directly on configured 101 # interfaces during startup. 102firewall_enable="NO" # Set to YES to enable firewall functionality 103firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 104firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 105firewall_quiet="NO" # Set to YES to suppress rule display 106firewall_logging="NO" # Set to YES to enable events logging 107firewall_flags="" # Flags passed to ipfw when type is a file 108ip_portrange_first="NO" # Set first dynamically allocated port 109ip_portrange_last="NO" # Set last dynamically allocated port 110ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 111ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 112ike_flags="" # Additional flags for IKE daemon 113ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 114ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 115natd_program="/sbin/natd" # path to natd, if you want a different one. 116natd_enable="NO" # Enable natd (if firewall_enable == YES). 117natd_interface="" # Public interface or IPaddress to use. 118natd_flags="" # Additional flags for natd. 119ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 120ipfilter_program="/sbin/ipf" # where the ipfilter program lives 121ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 122 # /usr/src/contrib/ipfilter/rules for examples 123ipfilter_flags="" # additional flags for ipfilter 124ipnat_enable="NO" # Set to YES to enable ipnat functionality 125ipnat_program="/sbin/ipnat" # where the ipnat program lives 126ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 127ipnat_flags="" # additional flags for ipnat 128ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 129ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 130ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 131ipfs_enable="NO" # Set to YES to enable saving and restoring 132 # of state tables at shutdown and boot 133ipfs_program="/sbin/ipfs" # where the ipfs program lives 134ipfs_flags="" # additional flags for ipfs 135pf_enable="NO" # Set to YES to enable packet filter (pf) 136pf_rules="/etc/pf.conf" # rules definition file for pf 137pf_program="/sbin/pfctl" # where the pfctl program lives 138pf_flags="" # additional flags for pfctl 139pflog_enable="NO" # Set to YES to enable packet filter logging 140pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 141pflog_program="/sbin/pflogd" # where the pflogd program lives 142pflog_flags="" # additional flags for pflogd 143pfsync_enable="NO" # Expose pf state to other hosts for syncing 144pfsync_syncdev="" # Interface for pfsync to work through 145pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 146tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 147log_in_vain="0" # >=1 to log connects to ports w/o listeners. 148tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 149# For the following option you need to have TCP_DROP_SYNFIN set in your 150# kernel. Please refer to LINT and NOTES for details. 151tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 152 # NOTE: this violates the TCP specification 153icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 154icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 155network_interfaces="auto" # List of network interfaces (or "auto"). 156cloned_interfaces="" # List of cloned network interfaces to create. 157#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 158ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 159#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 160#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 161#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 162#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 163# 164#autobridge_interfaces="bridge0" # List of bridges to check 165#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 166# 167# If you have any sppp(4) interfaces above, you might also want to set 168# the following parameters. Refer to spppcontrol(8) for their meaning. 169sppp_interfaces="" # List of sppp interfaces. 170#sppp_interfaces="isp0" # example: sppp over ISDN 171#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 172gif_interfaces="NO" # List of GIF tunnels (or "NO"). 173#gif_interfaces="gif0 gif1" # Examples typically for a router. 174 # Choose correct tunnel addrs. 175#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 176#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 177 178# User ppp configuration. 179ppp_enable="NO" # Start user-ppp (or NO). 180ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 181ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 182 # For details see man page for ppp(8). Default is auto. 183ppp_nat="YES" # Use PPP's internal network address translation or NO. 184ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 185ppp_user="root" # Which user to run ppp as 186 187### Network daemon (miscellaneous) ### 188hostapd_enable="NO" # Run hostap daemon. 189syslogd_enable="YES" # Run syslog daemon (or NO). 190syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 191syslogd_flags="-s" # Flags to syslogd (if enabled). 192inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 193inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 194inetd_flags="-wW -C 60" # Optional flags to inetd 195# 196# named. It may be possible to run named in a sandbox, man security for 197# details. 198# 199named_enable="NO" # Run named, the DNS server (or NO). 200named_program="/usr/sbin/named" # path to named, if you want a different one. 201#named_flags="" # Flags for named 202named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 203named_uid="bind" # User to run named as 204named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 205named_chroot_autoupdate="YES" # Automatically install/update chrooted 206 # components of named. See /etc/rc.d/named. 207named_symlink_enable="YES" # Symlink the chrooted pid file 208 209# 210# kerberos. Do not run the admin daemons on slave servers 211# 212kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 213kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 214kerberos5_server_flags="" # Additional flags to the kerberos 5 server 215kadmind5_server_enable="NO" # Run kadmind (or NO) 216kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 217kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 218kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 219 220rwhod_enable="NO" # Run the rwho daemon (or NO). 221rwhod_flags="" # Flags for rwhod 222rarpd_enable="NO" # Run rarpd (or NO). 223rarpd_flags="" # Flags to rarpd. 224bootparamd_enable="NO" # Run bootparamd (or NO). 225bootparamd_flags="" # Flags to bootparamd 226pppoed_enable="NO" # Run the PPP over Ethernet daemon. 227pppoed_provider="*" # Provider and ppp(8) config file entry. 228pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 229pppoed_interface="fxp0" # The interface that pppoed runs on. 230sshd_enable="NO" # Enable sshd 231sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 232sshd_flags="" # Additional flags for sshd. 233ftpd_enable="NO" # Enable stand-alone ftpd. 234ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 235ftpd_flags="" # Additional flags to stand-alone ftpd. 236 237### Network daemon (NFS): All need rpcbind_enable="YES" ### 238amd_enable="NO" # Run amd service with $amd_flags (or NO). 239amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 240amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 241amd_map_program="NO" # Can be set to "ypcat -k amd.master" 242nfs_client_enable="NO" # This host is an NFS client (or NO). 243nfs_access_cache="60" # Client cache timeout in seconds 244nfs_server_enable="NO" # This host is an NFS server (or NO). 245nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 246mountd_enable="NO" # Run mountd (or NO). 247mountd_flags="-r" # Flags to mountd (if NFS server enabled). 248weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 249nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 250nfs_bufpackets="" # bufspace (in packets) for client 251rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 252rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 253rpcbind_enable="NO" # Run the portmapper service (YES/NO). 254rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 255rpcbind_flags="" # Flags to rpcbind (if enabled). 256rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 257keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 258keyserv_flags="" # Flags to keyserv (if enabled). 259 260### Network Time Services options: ### 261timed_enable="NO" # Run the time daemon (or NO). 262timed_flags="" # Flags to timed (if enabled). 263ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 264ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 265ntpdate_flags="-b" # Flags to ntpdate (if enabled). 266ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 267ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 268ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 269ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 270ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 271ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 272ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 273 # Flags to ntpd (if enabled). 274 275# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 276nis_client_enable="NO" # We're an NIS client (or NO). 277nis_client_flags="" # Flags to ypbind (if enabled). 278nis_ypset_enable="NO" # Run ypset at boot time (or NO). 279nis_ypset_flags="" # Flags to ypset (if enabled). 280nis_server_enable="NO" # We're an NIS server (or NO). 281nis_server_flags="" # Flags to ypserv (if enabled). 282nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 283nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 284nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 285nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 286 287### SNMP daemon ### 288# Be sure to understand the security implications of running SNMP v1/v2 289# in your network. 290bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 291bsnmpd_flags="" # Flags for bsnmpd. 292 293### Network routing options: ### 294defaultrouter="NO" # Set to default gateway (or NO). 295static_routes="" # Set to static route list (or leave empty). 296natm_static_routes="" # Set to static route list for NATM (or leave empty). 297gateway_enable="NO" # Set to YES if this host will be a gateway. 298router_enable="NO" # Set to YES to enable a routing daemon. 299router="/sbin/routed" # Name of routing daemon to use if enabled. 300router_flags="-q" # Flags for routing daemon. 301mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 302mrouted_flags="" # Flags for multicast routing daemon. 303ipxgateway_enable="NO" # Set to YES to enable IPX routing. 304ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 305ipxrouted_flags="" # Flags for IPX routing daemon. 306arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 307forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 308accept_sourceroute="NO" # accept source routed packets to us 309 310### ATM interface options: ### 311atm_enable="NO" # Configure ATM interfaces (or NO). 312#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 313#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 314#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 315#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 316#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 317#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 318atm_pvcs="" # Set to PVC list (or leave empty). 319atm_arps="" # Set to permanent ARP list (or leave empty). 320 321### ISDN interface options: (see also: /usr/share/examples/isdn) ### 322isdn_enable="NO" # Enable the ISDN subsystem (or NO). 323isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 324isdn_flags="-dn -d0x1f9" # Flags for isdnd 325isdn_ttype="cons25" # terminal type for fullscreen mode 326isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 327isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 328isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 329 330### Bluetooth ### 331hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 332hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 333 334sdpd_enable="NO" # Enable sdpd(8) (or NO) 335sdpd_control="/var/run/sdp" # sdpd(8) control socket 336sdpd_groupname="nobody" # set spdp(8) user/group to run as after 337sdpd_username="nobody" # it initializes 338 339### Miscellaneous network options: ### 340icmp_bmcastecho="NO" # respond to broadcast ping packets 341 342### IPv6 options: ### 343ipv6_enable="NO" # Set to YES to set up for IPv6. 344ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 345ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 346#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 347ipv6_static_routes="" # Set to static route list (or leave empty). 348#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 349 # route toward loopback interface. 350#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 351ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 352ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 353ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 354ipv6_router_flags="" # Flags to IPv6 routing daemon. 355#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 356 # addrs. 357#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 358 # node, you should stop advertisement. 359#ipv6_network_interfaces="ed0 ep0" # Examples for router 360 # or static configuration for end node. 361 # Choose correct prefix value. 362#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 363#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 364#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 365#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 366ipv6_default_interface="NO" # Default output interface for scoped addrs. 367 # Now this works only for IPv6 link local 368 # multicast addrs. 369rtsol_flags="" # Flags to IPv6 router solicitation. 370rtadvd_enable="NO" # Set to YES to enable an IPv6 router 371 # advertisement daemon. If set to YES, 372 # this router becomes a possible candidate 373 # IPv6 default router for local subnets. 374rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 375mroute6d_enable="NO" # Do IPv6 multicast routing. 376mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 377 # routing daemon. You need to 378 # install it from package or 379 # port. 380mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 381stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 382 # tunneling interface. Specify this entry 383 # to enable 6to4 interface. 384stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 385 # to limit peer addr range. Effective value 386 # is 0-31. 387stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 388 # If you like, you can set "AUTO" for this. 389stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 390ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 391 # IPv6-to-IPv4 TCP translator. You also need 392 # faithd(8) setup. 393ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 394 # communication. (like ::ffff:a.b.c.d) 395ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 396 # functionality 397ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 398ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 399ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 400ipv6_firewall_logging="NO" # Set to YES to enable events logging 401ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 402ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 403 # see /usr/src/contrib/ipfilter/rules 404 # for examples 405ip6addrctl_enable="NO" # Set to YES to enable default address selection 406ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 407 408############################################################## 409### System console options ################################# 410############################################################## 411 412keyboard="" # keyboard device to use (default /dev/kbd0). 413keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 414keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 415keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 416keychange="NO" # function keys default values (or NO). 417cursor="NO" # cursor type {normal|blink|destructive} (or NO). 418scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 419font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 420font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 421font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 422blanktime="300" # blank time (in seconds) or "NO" to turn it off. 423saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 424moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 425 # specifically overriden in rc.conf(5). 426moused_enable="NO" # Run the mouse daemon. 427moused_type="auto" # See man page for rc.conf(5) for available settings. 428moused_port="/dev/psm0" # Set to your mouse port. 429moused_flags="" # Any additional flags to moused. 430mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 431 # language code table, specify alternative range 432 # start like mousechar_start=3, see vidcontrol(1) 433allscreens_flags="" # Set this vidcontrol mode for all virtual screens 434allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 435 436############################################################## 437### Mail Transfer Agent (MTA) options ###################### 438############################################################## 439 440mta_start_script="/etc/rc.sendmail" 441 # Script to start your chosen MTA, called by /etc/rc. 442# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 443sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 444sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 445sendmail_procname="/usr/sbin/sendmail" # sendmail process name 446sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 447sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 448sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 449 # Flags for localhost-only MTA 450sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 451sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 452sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 453sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 454 # Flags for sendmail_msp_queue daemon. 455 456 457############################################################## 458### Miscellaneous administrative options ################### 459############################################################## 460 461auditd_enable="NO" # Run the audit daemon. 462auditd_flags="" # Which options to pass to the audit daemon. 463cached_enable="NO" # Run the nsswitch caching daemon. 464cron_enable="YES" # Run the periodic job daemon. 465cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 466cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 467cron_flags="" # Which options to pass to the cron daemon. 468lpd_enable="NO" # Run the line printer daemon. 469lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 470lpd_flags="" # Flags to lpd (if enabled). 471chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 472chkprintcap_flags="-d" # Create missing directories by default. 473dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 474dumpdir="/var/crash" # Directory where crash dumps are to be stored 475savecore_flags="" # Used if dumpdev is enabled above, and present. 476enable_quotas="NO" # turn on quotas on startup (or NO). 477check_quotas="YES" # Check quotas on startup (or NO). 478accounting_enable="NO" # Turn on process accounting (or NO). 479ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 480ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 481 482# Emulation/compatibility services provided by /etc/rc.d/abi 483sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 484linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 485svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 486 487clear_tmp_enable="NO" # Clear /tmp at startup. 488clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 489ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 490ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 491 # shared library search paths 492ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 493ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 494 # a.out shared library search paths 495ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" 496 # Local directories with ldconfig configuration files. 497ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" 498 # Local directories with 32-bit compatibility ldconfig 499 # configuration files. 500kern_securelevel_enable="NO" # kernel security level (see init(8)), 501kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 502 # Note that setting securelevel to 0 will result 503 # in the system booting with securelevel set to 1, as 504 # init(8) will raise the level when rc(8) completes. 505update_motd="YES" # update version info in /etc/motd (or NO) 506entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 507 # /var/db/entropy-file is preferred if / is not avail. 508entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 509entropy_save_sz="2048" # Size of the entropy cache files. 510entropy_save_num="8" # Number of entropy cache files to save. 511harvest_interrupt="YES" # Entropy device harvests interrupt randomness 512harvest_ethernet="YES" # Entropy device harvests ethernet randomness 513harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 514dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 515watchdogd_enable="NO" # Start the software watchdog daemon 516devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 517 # devfs(8) rules. 518devfs_system_ruleset="" # The name of a ruleset to apply to /dev 519devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 520 # apply (must be mounted already, i.e. fstab(5)) 521performance_cx_lowest="HIGH" # Online CPU idle state 522performance_cpu_freq="NONE" # Online CPU frequency 523economy_cx_lowest="HIGH" # Offline CPU idle state 524economy_cpu_freq="NONE" # Offline CPU frequency 525virecover_enable="YES" # Perform housekeeping for the vi(1) editor 526ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 527bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 528 # ruleset file. 529newsyslog_enable="YES" # Run newsyslog at startup. 530newsyslog_flags="-CN" # Newsyslog flags to create marked files 531 532############################################################## 533### Jail Configuration ####################################### 534############################################################## 535jail_enable="NO" # Set to NO to disable starting of any jails 536jail_list="" # Space separated list of names of jails 537jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 538jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 539jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 540 541# 542# To use rc's built-in jail infrastructure create entries for 543# each jail, specified in jail_list, with the following variables. 544# NOTES: 545# - replace 'example' with the jail's name. 546# - except rootdir, hostname and ip, all of the following variables may be made 547# global jail variables if you don't specify a jail name (ie. jail_interface). 548# 549#jail_example_rootdir="/usr/jail/default" # Jail's root directory 550#jail_example_hostname="default.domain.com" # Jail's hostname 551#jail_example_ip="192.168.0.10" # Jail's IP number 552#jail_example_interface="" # Interface to create the IP alias on 553#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 554#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for 555 # starting the jail. More than one can be 556 # specified using a trailing number 557#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 558#jail_example_devfs_enable="NO" # mount devfs in the jail 559#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 560#jail_example_procfs_enable="NO" # mount procfs in jail 561#jail_example_mount_enable="NO" # mount/umount jail's fs 562#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 563#jail_example_fstab="" # fstab(5) for mount/umount 564#jail_example_flags="-l -U root" # flags for jail(8) 565 566############################################################## 567### Define source_rc_confs, the mechanism used by /etc/rc.* ## 568### scripts to source rc_conf_files overrides safely. ## 569############################################################## 570 571if [ -z "${source_rc_confs_defined}" ]; then 572 source_rc_confs_defined=yes 573 source_rc_confs () { 574 local i sourced_files 575 for i in ${rc_conf_files}; do 576 case ${sourced_files} in 577 *:$i:*) 578 ;; 579 *) 580 sourced_files="${sourced_files}:$i:" 581 if [ -r $i ]; then 582 . $i 583 fi 584 ;; 585 esac 586 done 587 } 588fi 589