rc.conf revision 158431
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 158431 2006-05-11 14:23:43Z flz $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="mountcritlocal" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43removable_route_flush="YES" # Flush routes when removing an interface 44tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 45tmpsize="20m" # Size of mfs /tmp if created 46tmpmfs_flags="-S -M" # Extra mdmfs options for the mfs /tmp 47varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 48varsize="32m" # Size of mfs /var if created 49varmfs_flags="-S -M" # Extra mount options for the mfs /var 50populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 51cleanvar_enable="YES" # Clean the /var directory 52local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 53script_name_sep=" " # Change if your startup scripts' names contain spaces 54rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 55 56# Experimental - test before enabling 57gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 58gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 59gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 60gbde_lockdir="/etc" # Where to look for gbde lockfiles 61 62# GELI disk encryption configuration. 63geli_devices="" # List of devices to automatically attach in addition to 64 # GELI devices listed in /etc/fstab. 65geli_tries="" # Number of times to attempt attaching geli device. 66 # If empty, kern.geom.eli.tries will be used. 67geli_default_flags="" # Default flags for geli(8). 68geli_autodetach="YES" # Automatically detach on last close. 69 # Providers are marked as such when all file systems are 70 # mounted. 71# Example use. 72#geli_devices="da1 mirror/home" 73#geli_da1_flags="-p -k /etc/geli/da1.keys" 74#geli_da1_autodetach="NO" 75#geli_mirror_home_flags="-k /etc/geli/home.keys" 76 77geli_swap_flags="-a aes -l 256 -s 4096 -d" # Options for GELI-encrypted 78 # swap partitions. 79 80root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 81fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 82background_fsck="YES" # Attempt to run fsck in the background where possible. 83background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 84netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 85extra_netfs_types="NO" # List of network extra filesystem types for delayed 86 # mount at startup (or NO). 87 88############################################################## 89### Network configuration sub-section ###################### 90############################################################## 91 92### Basic network and firewall/security options: ### 93hostname="" # Set this! 94nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 95dhclient_program="/sbin/dhclient" # Path to dhcp client program. 96dhclient_flags="" # Additional flags to pass to dhcp client. 97background_dhclient="NO" # Start dhcp client in the background. 98synchronous_dhclient="YES" # Start dhclient directly on configured 99 # interfaces during startup. 100firewall_enable="NO" # Set to YES to enable firewall functionality 101firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 102firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 103firewall_quiet="NO" # Set to YES to suppress rule display 104firewall_logging="NO" # Set to YES to enable events logging 105firewall_flags="" # Flags passed to ipfw when type is a file 106ip_portrange_first="NO" # Set first dynamically allocated port 107ip_portrange_last="NO" # Set last dynamically allocated port 108ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 109ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 110ike_flags="" # Additional flags for IKE daemon 111ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 112ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 113natd_program="/sbin/natd" # path to natd, if you want a different one. 114natd_enable="NO" # Enable natd (if firewall_enable == YES). 115natd_interface="" # Public interface or IPaddress to use. 116natd_flags="" # Additional flags for natd. 117ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 118ipfilter_program="/sbin/ipf" # where the ipfilter program lives 119ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 120 # /usr/src/contrib/ipfilter/rules for examples 121ipfilter_flags="" # additional flags for ipfilter 122ipnat_enable="NO" # Set to YES to enable ipnat functionality 123ipnat_program="/sbin/ipnat" # where the ipnat program lives 124ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 125ipnat_flags="" # additional flags for ipnat 126ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 127ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 128ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 129ipfs_enable="NO" # Set to YES to enable saving and restoring 130 # of state tables at shutdown and boot 131ipfs_program="/sbin/ipfs" # where the ipfs program lives 132ipfs_flags="" # additional flags for ipfs 133pf_enable="NO" # Set to YES to enable packet filter (pf) 134pf_rules="/etc/pf.conf" # rules definition file for pf 135pf_program="/sbin/pfctl" # where the pfctl program lives 136pf_flags="" # additional flags for pfctl 137pflog_enable="NO" # Set to YES to enable packet filter logging 138pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 139pflog_program="/sbin/pflogd" # where the pflogd program lives 140pflog_flags="" # additional flags for pflogd 141pfsync_enable="NO" # Expose pf state to other hosts for syncing 142pfsync_syncdev="" # Interface for pfsync to work through 143pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 144tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 145log_in_vain="0" # >=1 to log connects to ports w/o listeners. 146tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 147# For the following option you need to have TCP_DROP_SYNFIN set in your 148# kernel. Please refer to LINT and NOTES for details. 149tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 150 # NOTE: this violates the TCP specification 151icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 152icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 153network_interfaces="auto" # List of network interfaces (or "auto"). 154cloned_interfaces="" # List of cloned network interfaces to create. 155#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 156ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 157#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 158#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 159#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 160#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 161# 162# If you have any sppp(4) interfaces above, you might also want to set 163# the following parameters. Refer to spppcontrol(8) for their meaning. 164sppp_interfaces="" # List of sppp interfaces. 165#sppp_interfaces="isp0" # example: sppp over ISDN 166#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 167gif_interfaces="NO" # List of GIF tunnels (or "NO"). 168#gif_interfaces="gif0 gif1" # Examples typically for a router. 169 # Choose correct tunnel addrs. 170#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 171#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 172 173# User ppp configuration. 174ppp_enable="NO" # Start user-ppp (or NO). 175ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 176ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 177 # For details see man page for ppp(8). Default is auto. 178ppp_nat="YES" # Use PPP's internal network address translation or NO. 179ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 180ppp_user="root" # Which user to run ppp as 181 182### Network daemon (miscellaneous) ### 183hostapd_enable="NO" # Run hostap daemon. 184syslogd_enable="YES" # Run syslog daemon (or NO). 185syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 186syslogd_flags="-s" # Flags to syslogd (if enabled). 187inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 188inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 189inetd_flags="-wW -C 60" # Optional flags to inetd 190# 191# named. It may be possible to run named in a sandbox, man security for 192# details. 193# 194named_enable="NO" # Run named, the DNS server (or NO). 195named_program="/usr/sbin/named" # path to named, if you want a different one. 196#named_flags="" # Flags for named 197named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 198named_uid="bind" # User to run named as 199named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 200named_chroot_autoupdate="YES" # Automatically install/update chrooted 201 # components of named. See /etc/rc.d/named. 202named_symlink_enable="YES" # Symlink the chrooted pid file 203 204# 205# kerberos. Do not run the admin daemons on slave servers 206# 207kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 208kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 209kerberos5_server_flags="" # Additional flags to the kerberos 5 server 210kadmind5_server_enable="NO" # Run kadmind (or NO) 211kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 212kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 213kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 214 215rwhod_enable="NO" # Run the rwho daemon (or NO). 216rwhod_flags="" # Flags for rwhod 217rarpd_enable="NO" # Run rarpd (or NO). 218rarpd_flags="" # Flags to rarpd. 219bootparamd_enable="NO" # Run bootparamd (or NO). 220bootparamd_flags="" # Flags to bootparamd 221pppoed_enable="NO" # Run the PPP over Ethernet daemon. 222pppoed_provider="*" # Provider and ppp(8) config file entry. 223pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 224pppoed_interface="fxp0" # The interface that pppoed runs on. 225sshd_enable="NO" # Enable sshd 226sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 227sshd_flags="" # Additional flags for sshd. 228ftpd_enable="NO" # Enable stand-alone ftpd. 229ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 230ftpd_flags="" # Additional flags to stand-alone ftpd. 231 232### Network daemon (NFS): All need rpcbind_enable="YES" ### 233amd_enable="NO" # Run amd service with $amd_flags (or NO). 234amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 235amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 236amd_map_program="NO" # Can be set to "ypcat -k amd.master" 237nfs_client_enable="NO" # This host is an NFS client (or NO). 238nfs_access_cache="2" # Client cache timeout in seconds 239nfs_server_enable="NO" # This host is an NFS server (or NO). 240nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 241mountd_enable="NO" # Run mountd (or NO). 242mountd_flags="-r" # Flags to mountd (if NFS server enabled). 243weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 244nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 245nfs_bufpackets="" # bufspace (in packets) for client 246rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 247rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 248rpcbind_enable="NO" # Run the portmapper service (YES/NO). 249rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 250rpcbind_flags="" # Flags to rpcbind (if enabled). 251rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 252keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 253keyserv_flags="" # Flags to keyserv (if enabled). 254 255### Network Time Services options: ### 256timed_enable="NO" # Run the time daemon (or NO). 257timed_flags="" # Flags to timed (if enabled). 258ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 259ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 260ntpdate_flags="-b" # Flags to ntpdate (if enabled). 261ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 262ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 263ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 264ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 265ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 266 # Flags to ntpd (if enabled). 267 268# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 269nis_client_enable="NO" # We're an NIS client (or NO). 270nis_client_flags="" # Flags to ypbind (if enabled). 271nis_ypset_enable="NO" # Run ypset at boot time (or NO). 272nis_ypset_flags="" # Flags to ypset (if enabled). 273nis_server_enable="NO" # We're an NIS server (or NO). 274nis_server_flags="" # Flags to ypserv (if enabled). 275nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 276nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 277nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 278nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 279 280### SNMP daemon ### 281# Be sure to understand the security implications of running SNMP v1/v2 282# in your network. 283bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 284bsnmpd_flags="" # Flags for bsnmpd. 285 286### Network routing options: ### 287defaultrouter="NO" # Set to default gateway (or NO). 288static_routes="" # Set to static route list (or leave empty). 289natm_static_routes="" # Set to static route list for NATM (or leave empty). 290gateway_enable="NO" # Set to YES if this host will be a gateway. 291router_enable="NO" # Set to YES to enable a routing daemon. 292router="/sbin/routed" # Name of routing daemon to use if enabled. 293router_flags="-q" # Flags for routing daemon. 294mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 295mrouted_flags="" # Flags for multicast routing daemon. 296ipxgateway_enable="NO" # Set to YES to enable IPX routing. 297ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 298ipxrouted_flags="" # Flags for IPX routing daemon. 299arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 300forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 301accept_sourceroute="NO" # accept source routed packets to us 302 303### ATM interface options: ### 304atm_enable="NO" # Configure ATM interfaces (or NO). 305#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 306#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 307#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 308#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 309#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 310#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 311atm_pvcs="" # Set to PVC list (or leave empty). 312atm_arps="" # Set to permanent ARP list (or leave empty). 313 314### ISDN interface options: (see also: /usr/share/examples/isdn) ### 315isdn_enable="NO" # Enable the ISDN subsystem (or NO). 316isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 317isdn_flags="-dn -d0x1f9" # Flags for isdnd 318isdn_ttype="cons25" # terminal type for fullscreen mode 319isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 320isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 321isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 322 323### Bluetooth ### 324hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 325hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 326 327sdpd_enable="NO" # Enable sdpd(8) (or NO) 328sdpd_control="/var/run/sdp" # sdpd(8) control socket 329sdpd_groupname="nobody" # set spdp(8) user/group to run as after 330sdpd_username="nobody" # it initializes 331 332### Miscellaneous network options: ### 333icmp_bmcastecho="NO" # respond to broadcast ping packets 334 335### IPv6 options: ### 336ipv6_enable="NO" # Set to YES to set up for IPv6. 337ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 338ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 339#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 340ipv6_static_routes="" # Set to static route list (or leave empty). 341#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 342 # route toward loopback interface. 343#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 344ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 345ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 346ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 347ipv6_router_flags="" # Flags to IPv6 routing daemon. 348#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 349 # addrs. 350#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 351 # node, you should stop advertisement. 352#ipv6_network_interfaces="ed0 ep0" # Examples for router 353 # or static configuration for end node. 354 # Choose correct prefix value. 355#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 356#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 357#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 358#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 359ipv6_default_interface="NO" # Default output interface for scoped addrs. 360 # Now this works only for IPv6 link local 361 # multicast addrs. 362rtsol_flags="" # Flags to IPv6 router solicitation. 363rtadvd_enable="NO" # Set to YES to enable an IPv6 router 364 # advertisement daemon. If set to YES, 365 # this router becomes a possible candidate 366 # IPv6 default router for local subnets. 367rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 368mroute6d_enable="NO" # Do IPv6 multicast routing. 369mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 370 # routing daemon. You need to 371 # install it from package or 372 # port. 373mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 374stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 375 # tunneling interface. Specify this entry 376 # to enable 6to4 interface. 377stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 378 # to limit peer addr range. Effective value 379 # is 0-31. 380stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 381 # If you like, you can set "AUTO" for this. 382stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 383ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 384 # IPv6-to-IPv4 TCP translator. You also need 385 # faithd(8) setup. 386ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 387 # communication. (like ::ffff:a.b.c.d) 388ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 389 # functionality 390ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 391ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 392ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 393ipv6_firewall_logging="NO" # Set to YES to enable events logging 394ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 395ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 396 # see /usr/src/contrib/ipfilter/rules 397 # for examples 398ip6addrctl_enable="NO" # Set to YES to enable default address selection 399ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 400 401############################################################## 402### System console options ################################# 403############################################################## 404 405keyboard="" # keyboard device to use (default /dev/kbd0). 406keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 407keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 408keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 409keychange="NO" # function keys default values (or NO). 410cursor="NO" # cursor type {normal|blink|destructive} (or NO). 411scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 412font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 413font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 414font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 415blanktime="300" # blank time (in seconds) or "NO" to turn it off. 416saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 417moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 418 # specifically overriden in rc.conf(5). 419moused_enable="NO" # Run the mouse daemon. 420moused_type="auto" # See man page for rc.conf(5) for available settings. 421moused_port="/dev/psm0" # Set to your mouse port. 422moused_flags="" # Any additional flags to moused. 423mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 424 # language code table, specify alternative range 425 # start like mousechar_start=3, see vidcontrol(1) 426allscreens_flags="" # Set this vidcontrol mode for all virtual screens 427allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 428 429 430############################################################## 431### pcvt console driver options ############################ 432############################################################## 433 434pcvt_verbose="NO" # set to YES to enable verbose configuration messages 435pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 436pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 437pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 438pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 439pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 440pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 441pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 442pcvt_blanktime="NO" # blank time (in seconds) (or NO). 443pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 444pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 445pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 446 447 448############################################################## 449### Mail Transfer Agent (MTA) options ###################### 450############################################################## 451 452mta_start_script="/etc/rc.sendmail" 453 # Script to start your chosen MTA, called by /etc/rc. 454# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 455sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 456sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 457sendmail_procname="/usr/sbin/sendmail" # sendmail process name 458sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 459sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 460sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 461 # Flags for localhost-only MTA 462sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 463sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 464sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 465sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 466 # Flags for sendmail_msp_queue daemon. 467 468 469############################################################## 470### Miscellaneous administrative options ################### 471############################################################## 472 473auditd_enable="NO" # Run the audit daemon. 474auditd_flags="" # Which options to pass to the audit daemon. 475cached_enable="NO" # Run the nsswitch caching daemon. 476cron_enable="YES" # Run the periodic job daemon. 477cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 478cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 479cron_flags="" # Which options to pass to the cron daemon. 480lpd_enable="NO" # Run the line printer daemon. 481lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 482lpd_flags="" # Flags to lpd (if enabled). 483chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 484chkprintcap_flags="-d" # Create missing directories by default. 485dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 486dumpdir="/var/crash" # Directory where crash dumps are to be stored 487savecore_flags="" # Used if dumpdev is enabled above, and present. 488enable_quotas="NO" # turn on quotas on startup (or NO). 489check_quotas="YES" # Check quotas on startup (or NO). 490accounting_enable="NO" # Turn on process accounting (or NO). 491ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 492ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 493 494# Emulation/compatibility services provided by /etc/rc.d/abi 495sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 496linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 497svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 498 499osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 500clear_tmp_enable="NO" # Clear /tmp at startup. 501clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 502ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 503ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 504 # shared library search paths 505ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths 506ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 507 # a.out shared library search paths 508ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" 509 # Local directories with ldconfig configuration files. 510ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" 511 # Local directories with 32-bit compatibility ldconfig 512 # configuration files. 513kern_securelevel_enable="NO" # kernel security level (see init(8)), 514kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 515 # Note that setting securelevel to 0 will result 516 # in the system booting with securelevel set to 1, as 517 # init(8) will raise the level when rc(8) completes. 518update_motd="YES" # update version info in /etc/motd (or NO) 519unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 520entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 521 # /var/db/entropy-file is preferred if / is not avail. 522entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 523entropy_save_sz="2048" # Size of the entropy cache files. 524entropy_save_num="8" # Number of entropy cache files to save. 525harvest_interrupt="YES" # Entropy device harvests interrupt randomness 526harvest_ethernet="YES" # Entropy device harvests ethernet randomness 527harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 528dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 529watchdogd_enable="NO" # Start the software watchdog daemon 530devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 531 # devfs(8) rules. 532devfs_system_ruleset="" # The name of a ruleset to apply to /dev 533devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 534 # apply (must be mounted already, i.e. fstab(5)) 535performance_cx_lowest="LOW" # Online CPU idle state 536performance_cpu_freq="NONE" # Online CPU frequency 537economy_cx_lowest="LOW" # Offline CPU idle state 538economy_cpu_freq="NONE" # Offline CPU frequency 539virecover_enable="YES" # Perform housekeeping for the vi(1) editor 540ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 541bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 542 # ruleset file. 543newsyslog_enable="YES" # Run newsyslog at startup. 544newsyslog_flags="-CN" # Newsyslog flags to create marked files 545 546############################################################## 547### Jail Configuration ####################################### 548############################################################## 549jail_enable="NO" # Set to NO to disable starting of any jails 550jail_list="" # Space separated list of names of jails 551jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 552jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 553jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 554 555# 556# To use rc's built-in jail infrastructure create entries for 557# each jail, specified in jail_list, with the following variables. 558# NOTES: 559# - replace 'example' with the jail's name. 560# - except rootdir, hostname and ip, all of the following variables may be made 561# global jail variables if you don't specify a jail name (ie. jail_interface). 562# 563#jail_example_rootdir="/usr/jail/default" # Jail's root directory 564#jail_example_hostname="default.domain.com" # Jail's hostname 565#jail_example_ip="192.168.0.10" # Jail's IP number 566#jail_example_interface="" # Interface to create the IP alias on 567#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 568#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 569#jail_example_devfs_enable="NO" # mount devfs in the jail 570#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 571#jail_example_procfs_enable="NO" # mount procfs in jail 572#jail_example_mount_enable="NO" # mount/umount jail's fs 573#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 574#jail_example_fstab="" # fstab(5) for mount/umount 575#jail_example_flags="-l -U root" # flags for jail(8) 576 577############################################################## 578### Define source_rc_confs, the mechanism used by /etc/rc.* ## 579### scripts to source rc_conf_files overrides safely. ## 580############################################################## 581 582if [ -z "${source_rc_confs_defined}" ]; then 583 source_rc_confs_defined=yes 584 source_rc_confs () { 585 local i sourced_files 586 for i in ${rc_conf_files}; do 587 case ${sourced_files} in 588 *:$i:*) 589 ;; 590 *) 591 sourced_files="${sourced_files}:$i:" 592 if [ -r $i ]; then 593 . $i 594 fi 595 ;; 596 esac 597 done 598 } 599fi 600