rc.conf revision 155208
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 155208 2006-02-02 10:02:19Z rwatson $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27early_late_divider="mountcritlocal" # Script that separates early/late 28 # stages of the boot process. Make sure you know 29 # the ramifications if you change this. 30 # See rc.conf(5) for more details. 31 32swapfile="NO" # Set to name of swapfile if aux swapfile desired. 33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 34apmd_enable="NO" # Run apmd to handle APM event from userland. 35apmd_flags="" # Flags to apmd (if enabled). 36devd_enable="YES" # Run devd, to trigger programs on device tree changes. 37devd_flags="" # Additional flags for devd(8). 38kldxref_enable="NO" # Build linker.hints files with kldxref(8). 39kldxref_clobber="NO" # Overwrite old linker.hints at boot. 40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 41pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 42pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 43pccard_beep="2" # pccard beep type. 44pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 45pccardd_flags="-z" # Additional flags for pccardd. 46pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 47powerd_enable="NO" # Run powerd to lower our power usage. 48powerd_flags="" # Flags to powerd (if enabled). 49removable_route_flush="YES" # Flush routes when removing an interface 50tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 51tmpsize="20m" # Size of mfs /tmp if created 52tmpmfs_flags="-S -M" # Extra mdmfs options for the mfs /tmp 53varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 54varsize="32m" # Size of mfs /var if created 55varmfs_flags="-S -M" # Extra mount options for the mfs /var 56populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 57cleanvar_enable="YES" # Clean the /var directory 58local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 59script_name_sep=" " # Change if your startup scripts' names contain spaces 60rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 61 62# Experimental - test before enabling 63gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 64gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 65gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 66gbde_lockdir="/etc" # Where to look for gbde lockfiles 67 68# GELI disk encryption configuration. 69geli_devices="" # List of devices to automatically attach in addition to 70 # GELI devices listed in /etc/fstab. 71geli_tries="" # Number of times to attempt attaching geli device. 72 # If empty, kern.geom.eli.tries will be used. 73geli_default_flags="" # Default flags for geli(8). 74geli_autodetach="YES" # Automatically detach on last close. 75 # Providers are marked as such when all file systems are 76 # mounted. 77# Example use. 78#geli_devices="da1 mirror/home" 79#geli_da1_flags="-p -k /etc/geli/da1.keys" 80#geli_da1_autodetach="NO" 81#geli_mirror_home_flags="-k /etc/geli/home.keys" 82 83geli_swap_flags="-a aes -l 256 -s 4096 -d" # Options for GELI-encrypted 84 # swap partitions. 85 86root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 87fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 88background_fsck="YES" # Attempt to run fsck in the background where possible. 89background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 90netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 91extra_netfs_types="NO" # List of network extra filesystem types for delayed 92 # mount at startup (or NO). 93 94############################################################## 95### Network configuration sub-section ###################### 96############################################################## 97 98### Basic network and firewall/security options: ### 99hostname="" # Set this! 100nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 101dhclient_program="/sbin/dhclient" # Path to dhcp client program. 102dhclient_flags="" # Additional flags to pass to dhcp client. 103background_dhclient="NO" # Start dhcp client in the background. 104firewall_enable="NO" # Set to YES to enable firewall functionality 105firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 106firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 107firewall_quiet="NO" # Set to YES to suppress rule display 108firewall_logging="NO" # Set to YES to enable events logging 109firewall_flags="" # Flags passed to ipfw when type is a file 110ip_portrange_first="NO" # Set first dynamically allocated port 111ip_portrange_last="NO" # Set last dynamically allocated port 112ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 113ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 114ike_flags="" # Additional flags for IKE daemon 115ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 116ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 117natd_program="/sbin/natd" # path to natd, if you want a different one. 118natd_enable="NO" # Enable natd (if firewall_enable == YES). 119natd_interface="" # Public interface or IPaddress to use. 120natd_flags="" # Additional flags for natd. 121ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 122ipfilter_program="/sbin/ipf" # where the ipfilter program lives 123ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 124 # /usr/src/contrib/ipfilter/rules for examples 125ipfilter_flags="" # additional flags for ipfilter 126ipnat_enable="NO" # Set to YES to enable ipnat functionality 127ipnat_program="/sbin/ipnat" # where the ipnat program lives 128ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 129ipnat_flags="" # additional flags for ipnat 130ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 131ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 132ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 133ipfs_enable="NO" # Set to YES to enable saving and restoring 134 # of state tables at shutdown and boot 135ipfs_program="/sbin/ipfs" # where the ipfs program lives 136ipfs_flags="" # additional flags for ipfs 137pf_enable="NO" # Set to YES to enable packet filter (pf) 138pf_rules="/etc/pf.conf" # rules definition file for pf 139pf_program="/sbin/pfctl" # where the pfctl program lives 140pf_flags="" # additional flags for pfctl 141pflog_enable="NO" # Set to YES to enable packet filter logging 142pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 143pflog_program="/sbin/pflogd" # where the pflogd program lives 144pflog_flags="" # additional flags for pflogd 145pfsync_enable="NO" # Expose pf state to other hosts for syncing 146pfsync_syncdev="" # Interface for pfsync to work through 147pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 148tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 149log_in_vain="0" # >=1 to log connects to ports w/o listeners. 150tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 151# For the following option you need to have TCP_DROP_SYNFIN set in your 152# kernel. Please refer to LINT and NOTES for details. 153tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 154 # NOTE: this violates the TCP specification 155icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 156icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 157network_interfaces="auto" # List of network interfaces (or "auto"). 158cloned_interfaces="" # List of cloned network interfaces to create. 159#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 160ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 161#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 162#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 163#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 164#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 165# 166# If you have any sppp(4) interfaces above, you might also want to set 167# the following parameters. Refer to spppcontrol(8) for their meaning. 168sppp_interfaces="" # List of sppp interfaces. 169#sppp_interfaces="isp0" # example: sppp over ISDN 170#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 171gif_interfaces="NO" # List of GIF tunnels (or "NO"). 172#gif_interfaces="gif0 gif1" # Examples typically for a router. 173 # Choose correct tunnel addrs. 174#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 175#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 176 177# User ppp configuration. 178ppp_enable="NO" # Start user-ppp (or NO). 179ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 180ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 181 # For details see man page for ppp(8). Default is auto. 182ppp_nat="YES" # Use PPP's internal network address translation or NO. 183ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 184ppp_user="root" # Which user to run ppp as 185 186### Network daemon (miscellaneous) ### 187syslogd_enable="YES" # Run syslog daemon (or NO). 188syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 189syslogd_flags="-s" # Flags to syslogd (if enabled). 190inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 191inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 192inetd_flags="-wW -C 60" # Optional flags to inetd 193# 194# named. It may be possible to run named in a sandbox, man security for 195# details. 196# 197named_enable="NO" # Run named, the DNS server (or NO). 198named_program="/usr/sbin/named" # path to named, if you want a different one. 199named_flags="-u bind" # Flags for named 200named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 201named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 202named_chroot_autoupdate="YES" # Automatically install/update chrooted 203 # components of named. See /etc/rc.d/named. 204named_symlink_enable="YES" # Symlink the chrooted pid file 205 206# 207# kerberos. Do not run the admin daemons on slave servers 208# 209kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 210kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 211kerberos5_server_flags="" # Additional flags to the kerberos 5 server 212kadmind5_server_enable="NO" # Run kadmind (or NO) 213kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 214kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 215kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 216 217rwhod_enable="NO" # Run the rwho daemon (or NO). 218rwhod_flags="" # Flags for rwhod 219rarpd_enable="NO" # Run rarpd (or NO). 220rarpd_flags="" # Flags to rarpd. 221bootparamd_enable="NO" # Run bootparamd (or NO). 222bootparamd_flags="" # Flags to bootparamd 223pppoed_enable="NO" # Run the PPP over Ethernet daemon. 224pppoed_provider="*" # Provider and ppp(8) config file entry. 225pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 226pppoed_interface="fxp0" # The interface that pppoed runs on. 227sshd_enable="NO" # Enable sshd 228sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 229sshd_flags="" # Additional flags for sshd. 230ftpd_enable="NO" # Enable stand-alone ftpd. 231ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 232ftpd_flags="" # Additional flags to stand-alone ftpd. 233 234### Network daemon (NFS): All need rpcbind_enable="YES" ### 235amd_enable="NO" # Run amd service with $amd_flags (or NO). 236amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 237amd_map_program="NO" # Can be set to "ypcat -k amd.master" 238nfs_client_enable="NO" # This host is an NFS client (or NO). 239nfs_access_cache="2" # Client cache timeout in seconds 240nfs_server_enable="NO" # This host is an NFS server (or NO). 241nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 242mountd_enable="NO" # Run mountd (or NO). 243mountd_flags="-r" # Flags to mountd (if NFS server enabled). 244weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 245nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 246nfs_bufpackets="" # bufspace (in packets) for client 247rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 248rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 249rpcbind_enable="NO" # Run the portmapper service (YES/NO). 250rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 251rpcbind_flags="" # Flags to rpcbind (if enabled). 252rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 253keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 254keyserv_flags="" # Flags to keyserv (if enabled). 255 256### Network Time Services options: ### 257timed_enable="NO" # Run the time daemon (or NO). 258timed_flags="" # Flags to timed (if enabled). 259ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 260ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 261ntpdate_flags="-b" # Flags to ntpdate (if enabled). 262ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 263ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 264ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 265ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 266 # Flags to ntpd (if enabled). 267 268# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 269nis_client_enable="NO" # We're an NIS client (or NO). 270nis_client_flags="" # Flags to ypbind (if enabled). 271nis_ypset_enable="NO" # Run ypset at boot time (or NO). 272nis_ypset_flags="" # Flags to ypset (if enabled). 273nis_server_enable="NO" # We're an NIS server (or NO). 274nis_server_flags="" # Flags to ypserv (if enabled). 275nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 276nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 277nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 278nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 279 280### SNMP daemon ### 281# Be sure to understand the security implications of running SNMP v1/v2 282# in your network. 283bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 284bsnmpd_flags="" # Flags for bsnmpd. 285 286### Network routing options: ### 287defaultrouter="NO" # Set to default gateway (or NO). 288static_routes="" # Set to static route list (or leave empty). 289natm_static_routes="" # Set to static route list for NATM (or leave empty). 290gateway_enable="NO" # Set to YES if this host will be a gateway. 291router_enable="NO" # Set to YES to enable a routing daemon. 292router="/sbin/routed" # Name of routing daemon to use if enabled. 293router_flags="-q" # Flags for routing daemon. 294mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 295mrouted_flags="" # Flags for multicast routing daemon. 296ipxgateway_enable="NO" # Set to YES to enable IPX routing. 297ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 298ipxrouted_flags="" # Flags for IPX routing daemon. 299arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 300forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 301accept_sourceroute="NO" # accept source routed packets to us 302 303### ATM interface options: ### 304atm_enable="NO" # Configure ATM interfaces (or NO). 305#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 306#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 307#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 308#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 309#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 310#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 311atm_pvcs="" # Set to PVC list (or leave empty). 312atm_arps="" # Set to permanent ARP list (or leave empty). 313 314### ISDN interface options: (see also: /usr/share/examples/isdn) ### 315isdn_enable="NO" # Enable the ISDN subsystem (or NO). 316isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 317isdn_flags="-dn -d0x1f9" # Flags for isdnd 318isdn_ttype="cons25" # terminal type for fullscreen mode 319isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 320isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 321isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 322 323### Bluetooth ### 324hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 325hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 326 327sdpd_enable="NO" # Enable sdpd(8) (or NO) 328sdpd_control="/var/run/sdp" # sdpd(8) control socket 329sdpd_groupname="nobody" # set spdp(8) user/group to run as after 330sdpd_username="nobody" # it initializes 331 332### Miscellaneous network options: ### 333icmp_bmcastecho="NO" # respond to broadcast ping packets 334 335### IPv6 options: ### 336ipv6_enable="NO" # Set to YES to set up for IPv6. 337ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 338ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 339#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 340ipv6_static_routes="" # Set to static route list (or leave empty). 341#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 342 # route toward loopback interface. 343#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 344ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 345ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 346ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 347ipv6_router_flags="" # Flags to IPv6 routing daemon. 348#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 349 # addrs. 350#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 351 # node, you should stop advertisement. 352#ipv6_network_interfaces="ed0 ep0" # Examples for router 353 # or static configuration for end node. 354 # Choose correct prefix value. 355#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 356#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 357#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 358#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 359ipv6_default_interface="NO" # Default output interface for scoped addrs. 360 # Now this works only for IPv6 link local 361 # multicast addrs. 362rtsol_flags="" # Flags to IPv6 router solicitation. 363rtadvd_enable="NO" # Set to YES to enable an IPv6 router 364 # advertisement daemon. If set to YES, 365 # this router becomes a possible candidate 366 # IPv6 default router for local subnets. 367rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 368mroute6d_enable="NO" # Do IPv6 multicast routing. 369mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 370 # routing daemon. You need to 371 # install it from package or 372 # port. 373mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 374stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 375 # tunneling interface. Specify this entry 376 # to enable 6to4 interface. 377stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 378 # to limit peer addr range. Effective value 379 # is 0-31. 380stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 381 # If you like, you can set "AUTO" for this. 382stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 383ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 384 # IPv6-to-IPv4 TCP translator. You also need 385 # faithd(8) setup. 386ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 387 # communication. (like ::ffff:a.b.c.d) 388ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 389 # functionality 390ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 391ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 392ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 393ipv6_firewall_logging="NO" # Set to YES to enable events logging 394ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 395ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 396 # see /usr/src/contrib/ipfilter/rules 397 # for examples 398ip6addrctl_enable="NO" # Set to YES to enable default address selection 399ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 400 401############################################################## 402### System console options ################################# 403############################################################## 404 405keyboard="" # keyboard device to use (default /dev/kbd0). 406keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 407keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 408keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 409keychange="NO" # function keys default values (or NO). 410cursor="NO" # cursor type {normal|blink|destructive} (or NO). 411scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 412font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 413font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 414font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 415blanktime="300" # blank time (in seconds) or "NO" to turn it off. 416saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 417moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 418 # specifically overriden in rc.conf(5). 419moused_enable="NO" # Run the mouse daemon. 420moused_type="auto" # See man page for rc.conf(5) for available settings. 421moused_port="/dev/psm0" # Set to your mouse port. 422moused_flags="" # Any additional flags to moused. 423mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 424 # language code table, specify alternative range 425 # start like mousechar_start=3, see vidcontrol(1) 426allscreens_flags="" # Set this vidcontrol mode for all virtual screens 427allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 428 429 430############################################################## 431### pcvt console driver options ############################ 432############################################################## 433 434pcvt_verbose="NO" # set to YES to enable verbose configuration messages 435pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 436pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 437pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 438pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 439pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 440pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 441pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 442pcvt_blanktime="NO" # blank time (in seconds) (or NO). 443pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 444pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 445pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 446 447 448############################################################## 449### Mail Transfer Agent (MTA) options ###################### 450############################################################## 451 452mta_start_script="/etc/rc.sendmail" 453 # Script to start your chosen MTA, called by /etc/rc. 454# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 455sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 456sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 457sendmail_procname="/usr/sbin/sendmail" # sendmail process name 458sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 459sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 460sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 461 # Flags for localhost-only MTA 462sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 463sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 464sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 465sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 466 # Flags for sendmail_msp_queue daemon. 467 468 469############################################################## 470### Miscellaneous administrative options ################### 471############################################################## 472 473auditd_enable="NO" # Run the audit daemon. 474auditd_flags="" # Which options to pass to the audit daemon. 475cron_enable="YES" # Run the periodic job daemon. 476cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 477cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 478cron_flags="" # Which options to pass to the cron daemon. 479lpd_enable="NO" # Run the line printer daemon. 480lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 481lpd_flags="" # Flags to lpd (if enabled). 482chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 483chkprintcap_flags="-d" # Create missing directories by default. 484dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 485dumpdir="/var/crash" # Directory where crash dumps are to be stored 486savecore_flags="" # Used if dumpdev is enabled above, and present. 487enable_quotas="NO" # turn on quotas on startup (or NO). 488check_quotas="YES" # Check quotas on startup (or NO). 489accounting_enable="NO" # Turn on process accounting (or NO). 490ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 491ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 492 493# Emulation/compatibility services provided by /etc/rc.d/abi 494sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 495linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 496svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 497 498osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 499clear_tmp_enable="NO" # Clear /tmp at startup. 500clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 501ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 502ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 503 # shared library search paths 504ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 505 # a.out shared library search paths 506ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" 507 # Local directories with ldconfig configuration files. 508ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" 509 # Local directories with 32-bit compatibility ldconfig 510 # configuration files. 511kern_securelevel_enable="NO" # kernel security level (see init(8)), 512kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 513 # Note that setting securelevel to 0 will result 514 # in the system booting with securelevel set to 1, as 515 # init(8) will raise the level when rc(8) completes. 516update_motd="YES" # update version info in /etc/motd (or NO) 517unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 518entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 519 # /var/db/entropy-file is preferred if / is not avail. 520entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 521entropy_save_sz="2048" # Size of the entropy cache files. 522entropy_save_num="8" # Number of entropy cache files to save. 523harvest_interrupt="YES" # Entropy device harvests interrupt randomness 524harvest_ethernet="YES" # Entropy device harvests ethernet randomness 525harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 526dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 527watchdogd_enable="NO" # Start the software watchdog daemon 528devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 529 # devfs(8) rules. 530devfs_system_ruleset="" # The name of a ruleset to apply to /dev 531devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 532 # apply (must be mounted already, i.e. fstab(5)) 533performance_cx_lowest="LOW" # Online CPU idle state 534performance_cpu_freq="NONE" # Online CPU frequency 535economy_cx_lowest="LOW" # Offline CPU idle state 536economy_cpu_freq="NONE" # Offline CPU frequency 537virecover_enable="YES" # Perform housekeeping for the vi(1) editor 538ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 539bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 540 # ruleset file. 541newsyslog_enable="YES" # Run newsyslog at startup. 542newsyslog_flags="-CN" # Newsyslog flags to create marked files 543 544############################################################## 545### Jail Configuration ####################################### 546############################################################## 547jail_enable="NO" # Set to NO to disable starting of any jails 548jail_list="" # Space separated list of names of jails 549jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 550jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 551jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 552 553# 554# To use rc's built-in jail infrastructure create entries for 555# each jail, specified in jail_list, with the following variables. 556# NOTE: replace 'example' with the jail's name. 557# 558#jail_example_rootdir="/usr/jail/default" # Jail's root directory 559#jail_example_hostname="default.domain.com" # Jail's hostname 560#jail_example_ip="192.168.0.10" # Jail's IP number 561#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 562#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 563#jail_example_devfs_enable="NO" # mount devfs in the jail 564#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 565#jail_example_procfs_enable="NO" # mount procfs in jail 566#jail_example_mount_enable="NO" # mount/umount jail's fs 567#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 568#jail_example_fstab="" # fstab(5) for mount/umount 569#jail_example_flags="-l -U root" # flags for jail(8) 570 571############################################################## 572### Define source_rc_confs, the mechanism used by /etc/rc.* ## 573### scripts to source rc_conf_files overrides safely. ## 574############################################################## 575 576if [ -z "${source_rc_confs_defined}" ]; then 577 source_rc_confs_defined=yes 578 source_rc_confs () { 579 local i sourced_files 580 for i in ${rc_conf_files}; do 581 case ${sourced_files} in 582 *:$i:*) 583 ;; 584 *) 585 sourced_files="${sourced_files}:$i:" 586 if [ -r $i ]; then 587 . $i 588 fi 589 ;; 590 esac 591 done 592 } 593fi 594