rc.conf revision 152441
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 152441 2005-11-14 23:34:50Z brooks $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27swapfile="NO" # Set to name of swapfile if aux swapfile desired. 28apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 29apmd_enable="NO" # Run apmd to handle APM event from userland. 30apmd_flags="" # Flags to apmd (if enabled). 31devd_enable="YES" # Run devd, to trigger programs on device tree changes. 32kldxref_enable="NO" # Build linker.hints files with kldxref(8). 33kldxref_clobber="NO" # Overwrite old linker.hints at boot. 34kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 35pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 36pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 37pccard_beep="2" # pccard beep type. 38pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 39pccardd_flags="-z" # Additional flags for pccardd. 40pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43removable_route_flush="YES" # Flush routes when removing an interface 44tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 45tmpsize="20m" # Size of mfs /tmp if created 46tmpmfs_flags="-S -M" # Extra mdmfs options for the mfs /tmp 47varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 48varsize="32m" # Size of mfs /var if created 49varmfs_flags="-S -M" # Extra mount options for the mfs /var 50populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 51local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 52script_name_sep=" " # Change if your startup scripts' names contain spaces 53rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 54 55# Experimental - test before enabling 56gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 57gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 58gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 59gbde_lockdir="/etc" # Where to look for gbde lockfiles 60 61# GELI disk encryption configuration. 62geli_devices="" # List of devices to automatically attach in addition to 63 # GELI devices listed in /etc/fstab. 64geli_tries="" # Number of times to attempt attaching geli device. 65 # If empty, kern.geom.eli.tries will be used. 66geli_default_flags="" # Default flags for geli(8). 67geli_autodetach="YES" # Automatically detach on last close. 68 # Providers are marked as such when all file systems are 69 # mounted. 70# Example use. 71#geli_devices="da1 mirror/home" 72#geli_da1_flags="-p -k /etc/geli/da1.keys" 73#geli_da1_autodetach="NO" 74#geli_mirror_home_flags="-k /etc/geli/home.keys" 75 76geli_swap_flags="-a aes -l 256 -s 4096 -d" # Options for GELI-encrypted 77 # swap partitions. 78 79root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 80fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 81background_fsck="YES" # Attempt to run fsck in the background where possible. 82background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 83netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 84extra_netfs_types="NO" # List of network extra filesystem types for delayed 85 # mount at startup (or NO). 86 87############################################################## 88### Network configuration sub-section ###################### 89############################################################## 90 91### Basic network and firewall/security options: ### 92hostname="" # Set this! 93nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 94dhclient_program="/sbin/dhclient" # Path to dhcp client program. 95dhclient_flags="" # Additional flags to pass to dhcp client. 96background_dhclient="NO" # Start dhcp client in the background. 97firewall_enable="NO" # Set to YES to enable firewall functionality 98firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 99firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 100firewall_quiet="NO" # Set to YES to suppress rule display 101firewall_logging="NO" # Set to YES to enable events logging 102firewall_flags="" # Flags passed to ipfw when type is a file 103ip_portrange_first="NO" # Set first dynamically allocated port 104ip_portrange_last="NO" # Set last dynamically allocated port 105ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 106ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 107ike_flags="" # Additional flags for IKE daemon 108ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 109ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 110natd_program="/sbin/natd" # path to natd, if you want a different one. 111natd_enable="NO" # Enable natd (if firewall_enable == YES). 112natd_interface="" # Public interface or IPaddress to use. 113natd_flags="" # Additional flags for natd. 114ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 115ipfilter_program="/sbin/ipf" # where the ipfilter program lives 116ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 117 # /usr/src/contrib/ipfilter/rules for examples 118ipfilter_flags="" # additional flags for ipfilter 119ipnat_enable="NO" # Set to YES to enable ipnat functionality 120ipnat_program="/sbin/ipnat" # where the ipnat program lives 121ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 122ipnat_flags="" # additional flags for ipnat 123ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 124ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 125ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 126ipfs_enable="NO" # Set to YES to enable saving and restoring 127 # of state tables at shutdown and boot 128ipfs_program="/sbin/ipfs" # where the ipfs program lives 129ipfs_flags="" # additional flags for ipfs 130pf_enable="NO" # Set to YES to enable packet filter (pf) 131pf_rules="/etc/pf.conf" # rules definition file for pf 132pf_program="/sbin/pfctl" # where the pfctl program lives 133pf_flags="" # additional flags for pfctl 134pflog_enable="NO" # Set to YES to enable packet filter logging 135pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 136pflog_program="/sbin/pflogd" # where the pflogd program lives 137pflog_flags="" # additional flags for pflogd 138pfsync_enable="NO" # Expose pf state to other hosts for syncing 139pfsync_syncdev="" # Interface for pfsync to work through 140pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 141tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 142log_in_vain="0" # >=1 to log connects to ports w/o listeners. 143tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 144# For the following option you need to have TCP_DROP_SYNFIN set in your 145# kernel. Please refer to LINT and NOTES for details. 146tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 147 # NOTE: this violates the TCP specification 148icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 149icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 150network_interfaces="auto" # List of network interfaces (or "auto"). 151cloned_interfaces="" # List of cloned network interfaces to create. 152#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 153ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 154#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 155#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 156#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 157#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 158# 159# If you have any sppp(4) interfaces above, you might also want to set 160# the following parameters. Refer to spppcontrol(8) for their meaning. 161sppp_interfaces="" # List of sppp interfaces. 162#sppp_interfaces="isp0" # example: sppp over ISDN 163#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 164gif_interfaces="NO" # List of GIF tunnels (or "NO"). 165#gif_interfaces="gif0 gif1" # Examples typically for a router. 166 # Choose correct tunnel addrs. 167#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 168#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 169 170# User ppp configuration. 171ppp_enable="NO" # Start user-ppp (or NO). 172ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 173ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 174 # For details see man page for ppp(8). Default is auto. 175ppp_nat="YES" # Use PPP's internal network address translation or NO. 176ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 177ppp_user="root" # Which user to run ppp as 178 179### Network daemon (miscellaneous) ### 180syslogd_enable="YES" # Run syslog daemon (or NO). 181syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 182syslogd_flags="-s" # Flags to syslogd (if enabled). 183inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 184inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 185inetd_flags="-wW -C 60" # Optional flags to inetd 186# 187# named. It may be possible to run named in a sandbox, man security for 188# details. 189# 190named_enable="NO" # Run named, the DNS server (or NO). 191named_program="/usr/sbin/named" # path to named, if you want a different one. 192named_flags="-u bind" # Flags for named 193named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 194named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 195named_chroot_autoupdate="YES" # Automatically install/update chrooted 196 # components of named. See /etc/rc.d/named. 197named_symlink_enable="YES" # Symlink the chrooted pid file 198 199# 200# kerberos. Do not run the admin daemons on slave servers 201# 202kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 203kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 204kerberos5_server_flags="" # Additional flags to the kerberos 5 server 205kadmind5_server_enable="NO" # Run kadmind (or NO) 206kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 207kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 208kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 209 210rwhod_enable="NO" # Run the rwho daemon (or NO). 211rwhod_flags="" # Flags for rwhod 212rarpd_enable="NO" # Run rarpd (or NO). 213rarpd_flags="" # Flags to rarpd. 214bootparamd_enable="NO" # Run bootparamd (or NO). 215bootparamd_flags="" # Flags to bootparamd 216pppoed_enable="NO" # Run the PPP over Ethernet daemon. 217pppoed_provider="*" # Provider and ppp(8) config file entry. 218pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 219pppoed_interface="fxp0" # The interface that pppoed runs on. 220sshd_enable="NO" # Enable sshd 221sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 222sshd_flags="" # Additional flags for sshd. 223 224### Network daemon (NFS): All need rpcbind_enable="YES" ### 225amd_enable="NO" # Run amd service with $amd_flags (or NO). 226amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 227amd_map_program="NO" # Can be set to "ypcat -k amd.master" 228nfs_client_enable="NO" # This host is an NFS client (or NO). 229nfs_access_cache="2" # Client cache timeout in seconds 230nfs_server_enable="NO" # This host is an NFS server (or NO). 231nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 232mountd_enable="NO" # Run mountd (or NO). 233mountd_flags="-r" # Flags to mountd (if NFS server enabled). 234weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 235nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 236nfs_bufpackets="" # bufspace (in packets) for client 237rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 238rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 239rpcbind_enable="NO" # Run the portmapper service (YES/NO). 240rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 241rpcbind_flags="" # Flags to rpcbind (if enabled). 242rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 243keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 244keyserv_flags="" # Flags to keyserv (if enabled). 245 246### Network Time Services options: ### 247timed_enable="NO" # Run the time daemon (or NO). 248timed_flags="" # Flags to timed (if enabled). 249ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 250ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 251ntpdate_flags="-b" # Flags to ntpdate (if enabled). 252ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 253ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 254ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 255ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 256 # Flags to ntpd (if enabled). 257 258# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 259nis_client_enable="NO" # We're an NIS client (or NO). 260nis_client_flags="" # Flags to ypbind (if enabled). 261nis_ypset_enable="NO" # Run ypset at boot time (or NO). 262nis_ypset_flags="" # Flags to ypset (if enabled). 263nis_server_enable="NO" # We're an NIS server (or NO). 264nis_server_flags="" # Flags to ypserv (if enabled). 265nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 266nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 267nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 268nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 269 270### SNMP daemon ### 271# Be sure to understand the security implications of running SNMP v1/v2 272# in your network. 273bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 274bsnmpd_flags="" # Flags for bsnmpd. 275 276### Network routing options: ### 277defaultrouter="NO" # Set to default gateway (or NO). 278static_routes="" # Set to static route list (or leave empty). 279natm_static_routes="" # Set to static route list for NATM (or leave empty). 280gateway_enable="NO" # Set to YES if this host will be a gateway. 281router_enable="NO" # Set to YES to enable a routing daemon. 282router="/sbin/routed" # Name of routing daemon to use if enabled. 283router_flags="-q" # Flags for routing daemon. 284mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 285mrouted_flags="" # Flags for multicast routing daemon. 286ipxgateway_enable="NO" # Set to YES to enable IPX routing. 287ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 288ipxrouted_flags="" # Flags for IPX routing daemon. 289arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 290forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 291accept_sourceroute="NO" # accept source routed packets to us 292 293### ATM interface options: ### 294atm_enable="NO" # Configure ATM interfaces (or NO). 295#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 296#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 297#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 298#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 299#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 300#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 301atm_pvcs="" # Set to PVC list (or leave empty). 302atm_arps="" # Set to permanent ARP list (or leave empty). 303 304### ISDN interface options: (see also: /usr/share/examples/isdn) ### 305isdn_enable="NO" # Enable the ISDN subsystem (or NO). 306isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 307isdn_flags="-dn -d0x1f9" # Flags for isdnd 308isdn_ttype="cons25" # terminal type for fullscreen mode 309isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 310isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 311isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 312 313### Bluetooth ### 314hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 315hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 316 317sdpd_enable="NO" # Enable sdpd(8) (or NO) 318sdpd_control="/var/run/sdp" # sdpd(8) control socket 319sdpd_group="nobody" # set spdp(8) user/group to run as after 320sdpd_user="nobody" # it initializes 321 322### Miscellaneous network options: ### 323icmp_bmcastecho="NO" # respond to broadcast ping packets 324 325### IPv6 options: ### 326ipv6_enable="NO" # Set to YES to set up for IPv6. 327ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 328ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 329#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 330ipv6_static_routes="" # Set to static route list (or leave empty). 331#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 332 # route toward loopback interface. 333#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 334ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 335ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 336ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 337ipv6_router_flags="" # Flags to IPv6 routing daemon. 338#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 339 # addrs. 340#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 341 # node, you should stop advertisement. 342#ipv6_network_interfaces="ed0 ep0" # Examples for router 343 # or static configuration for end node. 344 # Choose correct prefix value. 345#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 346#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 347#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 348#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 349ipv6_default_interface="NO" # Default output interface for scoped addrs. 350 # Now this works only for IPv6 link local 351 # multicast addrs. 352rtsol_flags="" # Flags to IPv6 router solicitation. 353rtadvd_enable="NO" # Set to YES to enable an IPv6 router 354 # advertisement daemon. If set to YES, 355 # this router becomes a possible candidate 356 # IPv6 default router for local subnets. 357rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 358mroute6d_enable="NO" # Do IPv6 multicast routing. 359mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 360 # routing daemon. You need to 361 # install it from package or 362 # port. 363mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 364stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 365 # tunneling interface. Specify this entry 366 # to enable 6to4 interface. 367stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 368 # to limit peer addr range. Effective value 369 # is 0-31. 370stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 371 # If you like, you can set "AUTO" for this. 372stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 373ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 374 # IPv6-to-IPv4 TCP translator. You also need 375 # faithd(8) setup. 376ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 377 # communication. (like ::ffff:a.b.c.d) 378ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 379 # functionality 380ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 381ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 382ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 383ipv6_firewall_logging="NO" # Set to YES to enable events logging 384ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 385ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 386 # see /usr/src/contrib/ipfilter/rules 387 # for examples 388ip6addrctl_enable="NO" # Set to YES to enable default address selection 389ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 390 391############################################################## 392### System console options ################################# 393############################################################## 394 395keyboard="" # keyboard device to use (default /dev/kbd0). 396keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 397keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 398keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 399keychange="NO" # function keys default values (or NO). 400cursor="NO" # cursor type {normal|blink|destructive} (or NO). 401scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 402font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 403font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 404font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 405blanktime="300" # blank time (in seconds) or "NO" to turn it off. 406saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 407moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 408 # specifically overriden in rc.conf(5). 409moused_enable="NO" # Run the mouse daemon. 410moused_type="auto" # See man page for rc.conf(5) for available settings. 411moused_port="/dev/psm0" # Set to your mouse port. 412moused_flags="" # Any additional flags to moused. 413mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 414 # language code table, specify alternative range 415 # start like mousechar_start=3, see vidcontrol(1) 416allscreens_flags="" # Set this vidcontrol mode for all virtual screens 417allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 418 419 420############################################################## 421### pcvt console driver options ############################ 422############################################################## 423 424pcvt_verbose="NO" # set to YES to enable verbose configuration messages 425pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 426pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 427pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 428pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 429pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 430pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 431pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 432pcvt_blanktime="NO" # blank time (in seconds) (or NO). 433pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 434pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 435pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 436 437 438############################################################## 439### Mail Transfer Agent (MTA) options ###################### 440############################################################## 441 442mta_start_script="/etc/rc.sendmail" 443 # Script to start your chosen MTA, called by /etc/rc. 444# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 445sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 446sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 447sendmail_procname="/usr/sbin/sendmail" # sendmail process name 448sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 449sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 450sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 451 # Flags for localhost-only MTA 452sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 453sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 454sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 455sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 456 # Flags for sendmail_msp_queue daemon. 457 458 459############################################################## 460### Miscellaneous administrative options ################### 461############################################################## 462 463cron_enable="YES" # Run the periodic job daemon. 464cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 465cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 466cron_flags="" # Which options to pass to the cron daemon. 467lpd_enable="NO" # Run the line printer daemon. 468lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 469lpd_flags="" # Flags to lpd (if enabled). 470chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 471chkprintcap_flags="-d" # Create missing directories by default. 472usbd_enable="NO" # Run the usbd daemon. 473usbd_flags="" # Flags to usbd (if enabled). 474dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 475dumpdir="/var/crash" # Directory where crash dumps are to be stored 476savecore_flags="" # Used if dumpdev is enabled above, and present. 477enable_quotas="NO" # turn on quotas on startup (or NO). 478check_quotas="YES" # Check quotas on startup (or NO). 479accounting_enable="NO" # Turn on process accounting (or NO). 480ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 481ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 482sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 483linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 484svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 485osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 486clear_tmp_enable="NO" # Clear /tmp at startup. 487ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 488ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 489 # shared library search paths 490ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 491 # a.out shared library search paths 492kern_securelevel_enable="NO" # kernel security level (see init(8)), 493kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 494 # Note that setting securelevel to 0 will result 495 # in the system booting with securelevel set to 1, as 496 # init(8) will raise the level when rc(8) completes. 497update_motd="YES" # update version info in /etc/motd (or NO) 498unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 499entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 500 # /var/db/entropy-file is preferred if / is not avail. 501entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 502entropy_save_sz="2048" # Size of the entropy cache files. 503entropy_save_num="8" # Number of entropy cache files to save. 504harvest_interrupt="YES" # Entropy device harvests interrupt randomness 505harvest_ethernet="YES" # Entropy device harvests ethernet randomness 506harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 507dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 508watchdogd_enable="NO" # Start the software watchdog daemon 509devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 510 # devfs(8) rules. 511devfs_system_ruleset="" # The name of a ruleset to apply to /dev 512devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 513 # apply (must be mounted already, i.e. fstab(5)) 514performance_cx_lowest="HIGH" # Online CPU idle state 515performance_cpu_freq="NONE" # Online CPU frequency 516economy_cx_lowest="HIGH" # Offline CPU idle state 517economy_cpu_freq="NONE" # Offline CPU frequency 518virecover_enable="YES" # Perform housekeeping for the vi(1) editor 519ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 520bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 521 # ruleset file. 522newsyslog_enable="YES" # Run newsyslog at startup. 523newsyslog_flags="-CN" # Newsyslog flags to create marked files 524 525############################################################## 526### Jail Configuration ####################################### 527############################################################## 528jail_enable="NO" # Set to NO to disable starting of any jails 529jail_list="" # Space separated list of names of jails 530jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 531jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 532jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 533 534# 535# To use rc's built-in jail infrastructure create entries for 536# each jail, specified in jail_list, with the following variables. 537# NOTE: replace 'example' with the jail's name. 538# 539#jail_example_rootdir="/usr/jail/default" # Jail's root directory 540#jail_example_hostname="default.domain.com" # Jail's hostname 541#jail_example_ip="192.168.0.10" # Jail's IP number 542#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 543#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 544#jail_example_devfs_enable="NO" # mount devfs in the jail 545#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 546#jail_example_procfs_enable="NO" # mount procfs in jail 547#jail_example_mount_enable="NO" # mount/umount jail's fs 548#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 549#jail_example_fstab="" # fstab(5) for mount/umount 550#jail_example_flags="-l -U root" # flags for jail(8) 551 552############################################################## 553### Define source_rc_confs, the mechanism used by /etc/rc.* ## 554### scripts to source rc_conf_files overrides safely. ## 555############################################################## 556 557if [ -z "${source_rc_confs_defined}" ]; then 558 source_rc_confs_defined=yes 559 source_rc_confs () { 560 local i sourced_files 561 for i in ${rc_conf_files}; do 562 case ${sourced_files} in 563 *:$i:*) 564 ;; 565 *) 566 sourced_files="${sourced_files}:$i:" 567 if [ -r $i ]; then 568 . $i 569 fi 570 ;; 571 esac 572 done 573 } 574fi 575