rc.conf revision 149401
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 149401 2005-08-24 01:23:49Z brooks $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27swapfile="NO" # Set to name of swapfile if aux swapfile desired. 28apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 29apmd_enable="NO" # Run apmd to handle APM event from userland. 30apmd_flags="" # Flags to apmd (if enabled). 31devd_enable="YES" # Run devd, to trigger programs on device tree changes. 32kldxref_enable="NO" # Build linker.hints files with kldxref(8). 33kldxref_clobber="NO" # Overwrite old linker.hints at boot. 34kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 35pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 36pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 37pccard_beep="2" # pccard beep type. 38pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 39pccardd_flags="-z" # Additional flags for pccardd. 40pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43removable_route_flush="YES" # Flush routes when removing an interface 44tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 45tmpsize="20m" # Size of mfs /tmp if created 46tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 47varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 48varsize="32m" # Size of mfs /var if created 49varmfs_flags="-S" # Extra mount options for the mfs /var 50populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 51local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 52script_name_sep=" " # Change if your startup scripts' names contain spaces 53rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 54 55# Experimental - test before enabling 56gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 57gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 58gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 59gbde_lockdir="/etc" # Where to look for gbde lockfiles 60 61# GELI disk encryption configuration. 62geli_devices="" # List of devices to automatically attach in addition to 63 # GELI devices listed in /etc/fstab. 64geli_tries="" # Number of times to attempt attaching geli device. 65 # If empty, kern.geom.eli.tries will be used. 66geli_default_flags="" # Default flags for geli(8). 67geli_autodetach="YES" # Automatically detach on last close. 68 # Providers are marked as such when all file systems are 69 # mounted. 70# Example use. 71#geli_devices="da1 mirror/home" 72#geli_da1_flags="-p -k /etc/geli/da1.keys" 73#geli_da1_autodetach="NO" 74#geli_mirror_home_flags="-k /etc/geli/home.keys" 75 76geli_swap_flags="-a aes -l 256 -s 4096 -d" # Options for GELI-encrypted 77 # swap partitions. 78 79root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 80fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 81background_fsck="YES" # Attempt to run fsck in the background where possible. 82background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 83netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 84extra_netfs_types="NO" # List of network extra filesystem types for delayed 85 # mount at startup (or NO). 86 87############################################################## 88### Network configuration sub-section ###################### 89############################################################## 90 91### Basic network and firewall/security options: ### 92hostname="" # Set this! 93nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 94dhclient_program="/sbin/dhclient" # Path to dhcp client program. 95dhclient_flags="" # Additional flags to pass to dhcp client. 96background_dhclient="NO" # Start dhcp client in the background. 97firewall_enable="NO" # Set to YES to enable firewall functionality 98firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 99firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 100firewall_quiet="NO" # Set to YES to suppress rule display 101firewall_logging="NO" # Set to YES to enable events logging 102firewall_flags="" # Flags passed to ipfw when type is a file 103ip_portrange_first="NO" # Set first dynamically allocated port 104ip_portrange_last="NO" # Set last dynamically allocated port 105ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 106ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 107ike_flags="" # Additional flags for IKE daemon 108ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 109ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 110natd_program="/sbin/natd" # path to natd, if you want a different one. 111natd_enable="NO" # Enable natd (if firewall_enable == YES). 112natd_interface="" # Public interface or IPaddress to use. 113natd_flags="" # Additional flags for natd. 114ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 115ipfilter_program="/sbin/ipf" # where the ipfilter program lives 116ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 117 # /usr/src/contrib/ipfilter/rules for examples 118ipfilter_flags="" # additional flags for ipfilter 119ipnat_enable="NO" # Set to YES to enable ipnat functionality 120ipnat_program="/sbin/ipnat" # where the ipnat program lives 121ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 122ipnat_flags="" # additional flags for ipnat 123ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 124ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 125ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 126ipfs_enable="NO" # Set to YES to enable saving and restoring 127 # of state tables at shutdown and boot 128ipfs_program="/sbin/ipfs" # where the ipfs program lives 129ipfs_flags="" # additional flags for ipfs 130pf_enable="NO" # Set to YES to enable packet filter (pf) 131pf_rules="/etc/pf.conf" # rules definition file for pf 132pf_program="/sbin/pfctl" # where the pfctl program lives 133pf_flags="" # additional flags for pfctl 134pflog_enable="NO" # Set to YES to enable packet filter logging 135pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 136pflog_program="/sbin/pflogd" # where the pflogd program lives 137pflog_flags="" # additional flags for pflogd 138tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 139log_in_vain="0" # >=1 to log connects to ports w/o listeners. 140tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 141# For the following option you need to have TCP_DROP_SYNFIN set in your 142# kernel. Please refer to LINT and NOTES for details. 143tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 144 # NOTE: this violates the TCP specification 145icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 146icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 147network_interfaces="auto" # List of network interfaces (or "auto"). 148cloned_interfaces="" # List of cloned network interfaces to create. 149#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 150ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 151#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 152#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 153#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 154# 155# If you have any sppp(4) interfaces above, you might also want to set 156# the following parameters. Refer to spppcontrol(8) for their meaning. 157sppp_interfaces="" # List of sppp interfaces. 158#sppp_interfaces="isp0" # example: sppp over ISDN 159#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 160gif_interfaces="NO" # List of GIF tunnels (or "NO"). 161#gif_interfaces="gif0 gif1" # Examples typically for a router. 162 # Choose correct tunnel addrs. 163#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 164#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 165 166# User ppp configuration. 167ppp_enable="NO" # Start user-ppp (or NO). 168ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 169ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 170 # For details see man page for ppp(8). Default is auto. 171ppp_nat="YES" # Use PPP's internal network address translation or NO. 172ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 173ppp_user="root" # Which user to run ppp as 174 175### Network daemon (miscellaneous) ### 176syslogd_enable="YES" # Run syslog daemon (or NO). 177syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 178syslogd_flags="-s" # Flags to syslogd (if enabled). 179inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 180inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 181inetd_flags="-wW -C 60" # Optional flags to inetd 182# 183# named. It may be possible to run named in a sandbox, man security for 184# details. 185# 186named_enable="NO" # Run named, the DNS server (or NO). 187named_program="/usr/sbin/named" # path to named, if you want a different one. 188named_flags="-u bind" # Flags for named 189named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 190named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 191named_chroot_autoupdate="YES" # Automatically install/update chrooted 192 # components of named. See /etc/rc.d/named. 193named_symlink_enable="YES" # Symlink the chrooted pid file 194 195# 196# kerberos. Do not run the admin daemons on slave servers 197# 198kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 199kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 200kadmind5_server_enable="NO" # Run kadmind (or NO) 201kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 202kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 203kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 204 205rwhod_enable="NO" # Run the rwho daemon (or NO). 206rwhod_flags="" # Flags for rwhod 207rarpd_enable="NO" # Run rarpd (or NO). 208rarpd_flags="" # Flags to rarpd. 209bootparamd_enable="NO" # Run bootparamd (or NO). 210bootparamd_flags="" # Flags to bootparamd 211pppoed_enable="NO" # Run the PPP over Ethernet daemon. 212pppoed_provider="*" # Provider and ppp(8) config file entry. 213pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 214pppoed_interface="fxp0" # The interface that pppoed runs on. 215sshd_enable="NO" # Enable sshd 216sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 217sshd_flags="" # Additional flags for sshd. 218 219### Network daemon (NFS): All need rpcbind_enable="YES" ### 220amd_enable="NO" # Run amd service with $amd_flags (or NO). 221amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 222amd_map_program="NO" # Can be set to "ypcat -k amd.master" 223nfs_client_enable="NO" # This host is an NFS client (or NO). 224nfs_access_cache="2" # Client cache timeout in seconds 225nfs_server_enable="NO" # This host is an NFS server (or NO). 226nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 227mountd_enable="NO" # Run mountd (or NO). 228mountd_flags="-r" # Flags to mountd (if NFS server enabled). 229weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 230nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 231nfs_bufpackets="" # bufspace (in packets) for client 232rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 233rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 234rpcbind_enable="NO" # Run the portmapper service (YES/NO). 235rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 236rpcbind_flags="" # Flags to rpcbind (if enabled). 237rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 238keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 239keyserv_flags="" # Flags to keyserv (if enabled). 240 241### Network Time Services options: ### 242timed_enable="NO" # Run the time daemon (or NO). 243timed_flags="" # Flags to timed (if enabled). 244ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 245ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 246ntpdate_flags="-b" # Flags to ntpdate (if enabled). 247ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 248ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 249ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 250ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 251 # Flags to ntpd (if enabled). 252 253# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 254nis_client_enable="NO" # We're an NIS client (or NO). 255nis_client_flags="" # Flags to ypbind (if enabled). 256nis_ypset_enable="NO" # Run ypset at boot time (or NO). 257nis_ypset_flags="" # Flags to ypset (if enabled). 258nis_server_enable="NO" # We're an NIS server (or NO). 259nis_server_flags="" # Flags to ypserv (if enabled). 260nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 261nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 262nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 263nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 264 265### SNMP daemon ### 266# Be sure to understand the security implications of running SNMP v1/v2 267# in your network. 268bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 269bsnmpd_flags="" # Flags for bsnmpd. 270 271### Network routing options: ### 272defaultrouter="NO" # Set to default gateway (or NO). 273static_routes="" # Set to static route list (or leave empty). 274natm_static_routes="" # Set to static route list for NATM (or leave empty). 275gateway_enable="NO" # Set to YES if this host will be a gateway. 276router_enable="NO" # Set to YES to enable a routing daemon. 277router="/sbin/routed" # Name of routing daemon to use if enabled. 278router_flags="-q" # Flags for routing daemon. 279mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 280mrouted_flags="" # Flags for multicast routing daemon. 281ipxgateway_enable="NO" # Set to YES to enable IPX routing. 282ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 283ipxrouted_flags="" # Flags for IPX routing daemon. 284arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 285forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 286accept_sourceroute="NO" # accept source routed packets to us 287 288### ATM interface options: ### 289atm_enable="NO" # Configure ATM interfaces (or NO). 290#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 291#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 292#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 293#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 294#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 295#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 296atm_pvcs="" # Set to PVC list (or leave empty). 297atm_arps="" # Set to permanent ARP list (or leave empty). 298 299### ISDN interface options: (see also: /usr/share/examples/isdn) ### 300isdn_enable="NO" # Enable the ISDN subsystem (or NO). 301isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 302isdn_flags="-dn -d0x1f9" # Flags for isdnd 303isdn_ttype="cons25" # terminal type for fullscreen mode 304isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 305isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 306isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 307 308### Miscellaneous network options: ### 309icmp_bmcastecho="NO" # respond to broadcast ping packets 310 311### IPv6 options: ### 312ipv6_enable="NO" # Set to YES to set up for IPv6. 313ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 314ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 315#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 316ipv6_static_routes="" # Set to static route list (or leave empty). 317#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 318 # route toward loopback interface. 319#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 320ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 321ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 322ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 323ipv6_router_flags="" # Flags to IPv6 routing daemon. 324#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 325 # addrs. 326#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 327 # node, you should stop advertisement. 328#ipv6_network_interfaces="ed0 ep0" # Examples for router 329 # or static configuration for end node. 330 # Choose correct prefix value. 331#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 332#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 333#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 334#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 335ipv6_default_interface="NO" # Default output interface for scoped addrs. 336 # Now this works only for IPv6 link local 337 # multicast addrs. 338rtsol_flags="" # Flags to IPv6 router solicitation. 339rtadvd_enable="NO" # Set to YES to enable an IPv6 router 340 # advertisement daemon. If set to YES, 341 # this router becomes a possible candidate 342 # IPv6 default router for local subnets. 343rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 344mroute6d_enable="NO" # Do IPv6 multicast routing. 345mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 346 # routing daemon. You need to 347 # install it from package or 348 # port. 349mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 350stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 351 # tunneling interface. Specify this entry 352 # to enable 6to4 interface. 353stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 354 # to limit peer addr range. Effective value 355 # is 0-31. 356stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 357 # If you like, you can set "AUTO" for this. 358stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 359ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 360 # IPv6-to-IPv4 TCP translator. You also need 361 # faithd(8) setup. 362ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 363 # communication. (like ::ffff:a.b.c.d) 364ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 365 # functionality 366ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 367ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 368ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 369ipv6_firewall_logging="NO" # Set to YES to enable events logging 370ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 371ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 372 # see /usr/src/contrib/ipfilter/rules 373 # for examples 374ip6addrctl_enable="NO" # Set to YES to enable default address selection 375ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 376 377############################################################## 378### System console options ################################# 379############################################################## 380 381keyboard="" # keyboard device to use (default /dev/kbd0). 382keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 383keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 384keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 385keychange="NO" # function keys default values (or NO). 386cursor="NO" # cursor type {normal|blink|destructive} (or NO). 387scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 388font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 389font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 390font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 391blanktime="300" # blank time (in seconds) or "NO" to turn it off. 392saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 393moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 394 # specifically overriden in rc.conf(5). 395moused_enable="NO" # Run the mouse daemon. 396moused_type="auto" # See man page for rc.conf(5) for available settings. 397moused_port="/dev/psm0" # Set to your mouse port. 398moused_flags="" # Any additional flags to moused. 399mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 400 # language code table, specify alternative range 401 # start like mousechar_start=3, see vidcontrol(1) 402allscreens_flags="" # Set this vidcontrol mode for all virtual screens 403allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 404 405 406############################################################## 407### pcvt console driver options ############################ 408############################################################## 409 410pcvt_verbose="NO" # set to YES to enable verbose configuration messages 411pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 412pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 413pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 414pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 415pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 416pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 417pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 418pcvt_blanktime="NO" # blank time (in seconds) (or NO). 419pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 420pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 421pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 422 423 424############################################################## 425### Mail Transfer Agent (MTA) options ###################### 426############################################################## 427 428mta_start_script="/etc/rc.sendmail" 429 # Script to start your chosen MTA, called by /etc/rc. 430# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 431sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 432sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 433sendmail_procname="/usr/sbin/sendmail" # sendmail process name 434sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 435sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 436sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 437 # Flags for localhost-only MTA 438sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 439sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 440sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 441sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 442 # Flags for sendmail_msp_queue daemon. 443 444 445############################################################## 446### Miscellaneous administrative options ################### 447############################################################## 448 449cron_enable="YES" # Run the periodic job daemon. 450cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 451cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 452cron_flags="" # Which options to pass to the cron daemon. 453lpd_enable="NO" # Run the line printer daemon. 454lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 455lpd_flags="" # Flags to lpd (if enabled). 456chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 457chkprintcap_flags="-d" # Create missing directories by default. 458usbd_enable="NO" # Run the usbd daemon. 459usbd_flags="" # Flags to usbd (if enabled). 460dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 461dumpdir="/var/crash" # Directory where crash dumps are to be stored 462savecore_flags="" # Used if dumpdev is enabled above, and present. 463enable_quotas="NO" # turn on quotas on startup (or NO). 464check_quotas="YES" # Check quotas on startup (or NO). 465accounting_enable="NO" # Turn on process accounting (or NO). 466ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 467ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 468sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 469linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 470svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 471osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 472clear_tmp_enable="NO" # Clear /tmp at startup. 473ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 474ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 475 # shared library search paths 476ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 477 # a.out shared library search paths 478kern_securelevel_enable="NO" # kernel security level (see init(8)), 479kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 480 # Note that setting securelevel to 0 will result 481 # in the system booting with securelevel set to 1, as 482 # init(8) will raise the level when rc(8) completes. 483update_motd="YES" # update version info in /etc/motd (or NO) 484unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 485entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 486 # /var/db/entropy-file is preferred if / is not avail. 487entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 488entropy_save_sz="2048" # Size of the entropy cache files. 489entropy_save_num="8" # Number of entropy cache files to save. 490harvest_interrupt="YES" # Entropy device harvests interrupt randomness 491harvest_ethernet="YES" # Entropy device harvests ethernet randomness 492harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 493dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 494watchdogd_enable="NO" # Start the software watchdog daemon 495devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 496 # devfs(8) rules. 497devfs_system_ruleset="" # The name of a ruleset to apply to /dev 498devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 499 # apply (must be mounted already, i.e. fstab(5)) 500performance_cx_lowest="HIGH" # Online CPU idle state 501performance_cpu_freq="NONE" # Online CPU frequency 502economy_cx_lowest="HIGH" # Offline CPU idle state 503economy_cpu_freq="NONE" # Offline CPU frequency 504virecover_enable="YES" # Perform housekeeping for the vi(1) editor 505ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 506bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 507 # ruleset file. 508newsyslog_enable="YES" # Run newsyslog at startup. 509newsyslog_flags="-CN" # Newsyslog flags to create marked files 510 511############################################################## 512### Jail Configuration ####################################### 513############################################################## 514jail_enable="NO" # Set to NO to disable starting of any jails 515jail_list="" # Space separated list of names of jails 516jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 517jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 518jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 519 520# 521# To use rc's built-in jail infrastructure create entries for 522# each jail, specified in jail_list, with the following variables. 523# NOTE: replace 'example' with the jail's name. 524# 525#jail_example_rootdir="/usr/jail/default" # Jail's root directory 526#jail_example_hostname="default.domain.com" # Jail's hostname 527#jail_example_ip="192.168.0.10" # Jail's IP number 528#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 529#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 530#jail_example_devfs_enable="NO" # mount devfs in the jail 531#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 532#jail_example_procfs_enable="NO" # mount procfs in jail 533#jail_example_mount_enable="NO" # mount/umount jail's fs 534#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 535#jail_example_fstab="" # fstab(5) for mount/umount 536#jail_example_flags="-l -U root" # flags for jail(8) 537 538############################################################## 539### Define source_rc_confs, the mechanism used by /etc/rc.* ## 540### scripts to source rc_conf_files overrides safely. ## 541############################################################## 542 543if [ -z "${source_rc_confs_defined}" ]; then 544 source_rc_confs_defined=yes 545 source_rc_confs () { 546 local i sourced_files 547 for i in ${rc_conf_files}; do 548 case ${sourced_files} in 549 *:$i:*) 550 ;; 551 *) 552 sourced_files="${sourced_files}:$i:" 553 if [ -r $i ]; then 554 . $i 555 fi 556 ;; 557 esac 558 done 559 } 560fi 561