rc.conf revision 147610
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: head/etc/defaults/rc.conf 147610 2005-06-26 16:30:20Z pjd $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 27swapfile="NO" # Set to name of swapfile if aux swapfile desired. 28apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 29apmd_enable="NO" # Run apmd to handle APM event from userland. 30apmd_flags="" # Flags to apmd (if enabled). 31devd_enable="YES" # Run devd, to trigger programs on device tree changes. 32kldxref_enable="NO" # Build linker.hints files with kldxref(8). 33kldxref_clobber="NO" # Overwrite old linker.hints at boot. 34kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 35pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 36pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 37pccard_beep="2" # pccard beep type. 38pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 39pccardd_flags="-z" # Additional flags for pccardd. 40pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 41powerd_enable="NO" # Run powerd to lower our power usage. 42powerd_flags="" # Flags to powerd (if enabled). 43removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 44removable_route_flush="YES" # Flush routes when removing an interface 45tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 46tmpsize="20m" # Size of mfs /tmp if created 47tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 48varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 49varsize="32m" # Size of mfs /var if created 50varmfs_flags="-S" # Extra mount options for the mfs /var 51populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 52local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 53script_name_sep=" " # Change if your startup scripts' names contain spaces 54rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 55 56# Experimental - test before enabling 57gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 58gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 59gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 60gbde_lockdir="/etc" # Where to look for gbde lockfiles 61gbde_swap_enable="NO" # Set to YES to automatically initialize gbde swap 62 # devices listed in fstab with a random one-shot key 63 64root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 65fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 66background_fsck="YES" # Attempt to run fsck in the background where possible. 67background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 68netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 69extra_netfs_types="NO" # List of network extra filesystem types for delayed 70 # mount at startup (or NO). 71 72############################################################## 73### Network configuration sub-section ###################### 74############################################################## 75 76### Basic network and firewall/security options: ### 77hostname="" # Set this! 78nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 79dhclient_program="/sbin/dhclient" # Path to dhcp client program. 80dhclient_flags="" # Additional flags to pass to dhcp client. 81background_dhclient="NO" # Start dhcp client in the background. 82firewall_enable="NO" # Set to YES to enable firewall functionality 83firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 84firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 85firewall_quiet="NO" # Set to YES to suppress rule display 86firewall_logging="NO" # Set to YES to enable events logging 87firewall_flags="" # Flags passed to ipfw when type is a file 88ip_portrange_first="NO" # Set first dynamically allocated port 89ip_portrange_last="NO" # Set last dynamically allocated port 90ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 91ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 92ike_flags="" # Additional flags for IKE daemon 93ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 94ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 95natd_program="/sbin/natd" # path to natd, if you want a different one. 96natd_enable="NO" # Enable natd (if firewall_enable == YES). 97natd_interface="" # Public interface or IPaddress to use. 98natd_flags="" # Additional flags for natd. 99ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 100ipfilter_program="/sbin/ipf" # where the ipfilter program lives 101ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 102 # /usr/src/contrib/ipfilter/rules for examples 103ipfilter_flags="" # additional flags for ipfilter 104ipnat_enable="NO" # Set to YES to enable ipnat functionality 105ipnat_program="/sbin/ipnat" # where the ipnat program lives 106ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 107ipnat_flags="" # additional flags for ipnat 108ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 109ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 110ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 111ipfs_enable="NO" # Set to YES to enable saving and restoring 112 # of state tables at shutdown and boot 113ipfs_program="/sbin/ipfs" # where the ipfs program lives 114ipfs_flags="" # additional flags for ipfs 115pf_enable="NO" # Set to YES to enable packet filter (pf) 116pf_rules="/etc/pf.conf" # rules definition file for pf 117pf_program="/sbin/pfctl" # where the pfctl program lives 118pf_flags="" # additional flags for pfctl 119pflog_enable="NO" # Set to YES to enable packet filter logging 120pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 121pflog_program="/sbin/pflogd" # where the pflogd program lives 122pflog_flags="" # additional flags for pflogd 123tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 124log_in_vain="0" # >=1 to log connects to ports w/o listeners. 125tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 126# For the following option you need to have TCP_DROP_SYNFIN set in your 127# kernel. Please refer to LINT and NOTES for details. 128tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 129 # NOTE: this violates the TCP specification 130icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 131icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 132network_interfaces="auto" # List of network interfaces (or "auto"). 133cloned_interfaces="" # List of cloned network interfaces to create. 134#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 135ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 136#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 137#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 138#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 139# 140# If you have any sppp(4) interfaces above, you might also want to set 141# the following parameters. Refer to spppcontrol(8) for their meaning. 142sppp_interfaces="" # List of sppp interfaces. 143#sppp_interfaces="isp0" # example: sppp over ISDN 144#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 145gif_interfaces="NO" # List of GIF tunnels (or "NO"). 146#gif_interfaces="gif0 gif1" # Examples typically for a router. 147 # Choose correct tunnel addrs. 148#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 149#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 150 151# User ppp configuration. 152ppp_enable="NO" # Start user-ppp (or NO). 153ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 154ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 155 # For details see man page for ppp(8). Default is auto. 156ppp_nat="YES" # Use PPP's internal network address translation or NO. 157ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 158ppp_user="root" # Which user to run ppp as 159 160### Network daemon (miscellaneous) ### 161syslogd_enable="YES" # Run syslog daemon (or NO). 162syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 163syslogd_flags="-s" # Flags to syslogd (if enabled). 164inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 165inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 166inetd_flags="-wW -C 60" # Optional flags to inetd 167# 168# named. It may be possible to run named in a sandbox, man security for 169# details. 170# 171named_enable="NO" # Run named, the DNS server (or NO). 172named_program="/usr/sbin/named" # path to named, if you want a different one. 173named_flags="-u bind" # Flags for named 174named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 175named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 176named_chroot_autoupdate="YES" # Automatically install/update chrooted 177 # components of named. See /etc/rc.d/named. 178named_symlink_enable="YES" # Symlink the chrooted pid file 179 180# 181# kerberos. Do not run the admin daemons on slave servers 182# 183kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 184kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 185kadmind5_server_enable="NO" # Run kadmind (or NO) 186kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 187kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 188kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 189 190rwhod_enable="NO" # Run the rwho daemon (or NO). 191rwhod_flags="" # Flags for rwhod 192rarpd_enable="NO" # Run rarpd (or NO). 193rarpd_flags="" # Flags to rarpd. 194bootparamd_enable="NO" # Run bootparamd (or NO). 195bootparamd_flags="" # Flags to bootparamd 196pppoed_enable="NO" # Run the PPP over Ethernet daemon. 197pppoed_provider="*" # Provider and ppp(8) config file entry. 198pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 199pppoed_interface="fxp0" # The interface that pppoed runs on. 200sshd_enable="NO" # Enable sshd 201sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 202sshd_flags="" # Additional flags for sshd. 203 204### Network daemon (NFS): All need rpcbind_enable="YES" ### 205amd_enable="NO" # Run amd service with $amd_flags (or NO). 206amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 207amd_map_program="NO" # Can be set to "ypcat -k amd.master" 208nfs_client_enable="NO" # This host is an NFS client (or NO). 209nfs_access_cache="2" # Client cache timeout in seconds 210nfs_server_enable="NO" # This host is an NFS server (or NO). 211nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 212mountd_enable="NO" # Run mountd (or NO). 213mountd_flags="-r" # Flags to mountd (if NFS server enabled). 214weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 215nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 216nfs_bufpackets="" # bufspace (in packets) for client 217rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 218rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 219rpcbind_enable="NO" # Run the portmapper service (YES/NO). 220rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 221rpcbind_flags="" # Flags to rpcbind (if enabled). 222rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 223keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 224keyserv_flags="" # Flags to keyserv (if enabled). 225 226### Network Time Services options: ### 227timed_enable="NO" # Run the time daemon (or NO). 228timed_flags="" # Flags to timed (if enabled). 229ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 230ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 231ntpdate_flags="-b" # Flags to ntpdate (if enabled). 232ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 233ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 234ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 235ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 236 # Flags to ntpd (if enabled). 237 238# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 239nis_client_enable="NO" # We're an NIS client (or NO). 240nis_client_flags="" # Flags to ypbind (if enabled). 241nis_ypset_enable="NO" # Run ypset at boot time (or NO). 242nis_ypset_flags="" # Flags to ypset (if enabled). 243nis_server_enable="NO" # We're an NIS server (or NO). 244nis_server_flags="" # Flags to ypserv (if enabled). 245nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 246nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 247nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 248nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 249 250### SNMP daemon ### 251# Be sure to understand the security implications of running SNMP v1/v2 252# in your network. 253bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 254bsnmpd_flags="" # Flags for bsnmpd. 255 256### Network routing options: ### 257defaultrouter="NO" # Set to default gateway (or NO). 258static_routes="" # Set to static route list (or leave empty). 259natm_static_routes="" # Set to static route list for NATM (or leave empty). 260gateway_enable="NO" # Set to YES if this host will be a gateway. 261router_enable="NO" # Set to YES to enable a routing daemon. 262router="/sbin/routed" # Name of routing daemon to use if enabled. 263router_flags="-q" # Flags for routing daemon. 264mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 265mrouted_flags="" # Flags for multicast routing daemon. 266ipxgateway_enable="NO" # Set to YES to enable IPX routing. 267ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 268ipxrouted_flags="" # Flags for IPX routing daemon. 269arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 270forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 271accept_sourceroute="NO" # accept source routed packets to us 272 273### ATM interface options: ### 274atm_enable="NO" # Configure ATM interfaces (or NO). 275#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 276#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 277#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 278#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 279#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 280#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 281atm_pvcs="" # Set to PVC list (or leave empty). 282atm_arps="" # Set to permanent ARP list (or leave empty). 283 284### ISDN interface options: (see also: /usr/share/examples/isdn) ### 285isdn_enable="NO" # Enable the ISDN subsystem (or NO). 286isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 287isdn_flags="-dn -d0x1f9" # Flags for isdnd 288isdn_ttype="cons25" # terminal type for fullscreen mode 289isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 290isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 291isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 292 293### Miscellaneous network options: ### 294icmp_bmcastecho="NO" # respond to broadcast ping packets 295 296### IPv6 options: ### 297ipv6_enable="NO" # Set to YES to set up for IPv6. 298ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 299ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 300#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 301ipv6_static_routes="" # Set to static route list (or leave empty). 302#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 303 # route toward loopback interface. 304#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 305ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 306ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 307ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 308ipv6_router_flags="" # Flags to IPv6 routing daemon. 309#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 310 # addrs. 311#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 312 # node, you should stop advertisement. 313#ipv6_network_interfaces="ed0 ep0" # Examples for router 314 # or static configuration for end node. 315 # Choose correct prefix value. 316#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 317#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 318#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 319#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 320ipv6_default_interface="NO" # Default output interface for scoped addrs. 321 # Now this works only for IPv6 link local 322 # multicast addrs. 323rtsol_flags="" # Flags to IPv6 router solicitation. 324rtadvd_enable="NO" # Set to YES to enable an IPv6 router 325 # advertisement daemon. If set to YES, 326 # this router becomes a possible candidate 327 # IPv6 default router for local subnets. 328rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 329mroute6d_enable="NO" # Do IPv6 multicast routing. 330mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 331 # routing daemon. You need to 332 # install it from package or 333 # port. 334mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 335stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 336 # tunneling interface. Specify this entry 337 # to enable 6to4 interface. 338stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 339 # to limit peer addr range. Effective value 340 # is 0-31. 341stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 342 # If you like, you can set "AUTO" for this. 343stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 344ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 345 # IPv6-to-IPv4 TCP translator. You also need 346 # faithd(8) setup. 347ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 348 # communication. (like ::ffff:a.b.c.d) 349ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 350 # functionality 351ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 352ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 353ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 354ipv6_firewall_logging="NO" # Set to YES to enable events logging 355ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 356ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 357 # see /usr/src/contrib/ipfilter/rules 358 # for examples 359ip6addrctl_enable="NO" # Set to YES to enable default address selection 360ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 361 362############################################################## 363### System console options ################################# 364############################################################## 365 366keyboard="" # keyboard device to use (default /dev/kbd0). 367keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 368keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 369keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 370keychange="NO" # function keys default values (or NO). 371cursor="NO" # cursor type {normal|blink|destructive} (or NO). 372scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 373font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 374font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 375font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 376blanktime="300" # blank time (in seconds) or "NO" to turn it off. 377saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 378moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 379 # specifically overriden in rc.conf(5). 380moused_enable="NO" # Run the mouse daemon. 381moused_type="auto" # See man page for rc.conf(5) for available settings. 382moused_port="/dev/psm0" # Set to your mouse port. 383moused_flags="" # Any additional flags to moused. 384mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 385 # language code table, specify alternative range 386 # start like mousechar_start=3, see vidcontrol(1) 387allscreens_flags="" # Set this vidcontrol mode for all virtual screens 388allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 389 390 391############################################################## 392### pcvt console driver options ############################ 393############################################################## 394 395pcvt_verbose="NO" # set to YES to enable verbose configuration messages 396pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 397pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 398pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 399pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 400pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 401pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 402pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 403pcvt_blanktime="NO" # blank time (in seconds) (or NO). 404pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 405pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 406pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 407 408 409############################################################## 410### Mail Transfer Agent (MTA) options ###################### 411############################################################## 412 413mta_start_script="/etc/rc.sendmail" 414 # Script to start your chosen MTA, called by /etc/rc. 415# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 416sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 417sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 418sendmail_procname="/usr/sbin/sendmail" # sendmail process name 419sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 420sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 421sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 422 # Flags for localhost-only MTA 423sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 424sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 425sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 426sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 427 # Flags for sendmail_msp_queue daemon. 428 429 430############################################################## 431### Miscellaneous administrative options ################### 432############################################################## 433 434cron_enable="YES" # Run the periodic job daemon. 435cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 436cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 437cron_flags="" # Which options to pass to the cron daemon. 438lpd_enable="NO" # Run the line printer daemon. 439lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 440lpd_flags="" # Flags to lpd (if enabled). 441chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 442chkprintcap_flags="-d" # Create missing directories by default. 443usbd_enable="NO" # Run the usbd daemon. 444usbd_flags="" # Flags to usbd (if enabled). 445dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 446dumpdir="/var/crash" # Directory where crash dumps are to be stored 447savecore_flags="" # Used if dumpdev is enabled above, and present. 448enable_quotas="NO" # turn on quotas on startup (or NO). 449check_quotas="YES" # Check quotas on startup (or NO). 450accounting_enable="NO" # Turn on process accounting (or NO). 451ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 452ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 453sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 454linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 455svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 456osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 457clear_tmp_enable="NO" # Clear /tmp at startup. 458ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 459ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 460 # shared library search paths 461ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 462 # a.out shared library search paths 463kern_securelevel_enable="NO" # kernel security level (see init(8)), 464kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 465update_motd="YES" # update version info in /etc/motd (or NO) 466unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 467entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 468 # /var/db/entropy-file is preferred if / is not avail. 469entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 470entropy_save_sz="2048" # Size of the entropy cache files. 471entropy_save_num="8" # Number of entropy cache files to save. 472harvest_interrupt="YES" # Entropy device harvests interrupt randomness 473harvest_ethernet="YES" # Entropy device harvests ethernet randomness 474harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 475dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 476watchdogd_enable="NO" # Start the software watchdog daemon 477devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 478 # devfs(8) rules. 479devfs_system_ruleset="" # The name of a ruleset to apply to /dev 480devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 481 # apply (must be mounted already, i.e. fstab(5)) 482performance_cx_lowest="HIGH" # Online CPU idle state 483performance_cpu_freq="NONE" # Online CPU frequency 484economy_cx_lowest="HIGH" # Offline CPU idle state 485economy_cpu_freq="NONE" # Offline CPU frequency 486virecover_enable="YES" # Perform housekeeping for the vi(1) editor 487ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 488bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 489 # ruleset file. 490newsyslog_enable="YES" # Run newsyslog at startup. 491newsyslog_flags="-CN" # Newsyslog flags to create marked files 492 493############################################################## 494### Jail Configuration ####################################### 495############################################################## 496jail_enable="NO" # Set to NO to disable starting of any jails 497jail_list="" # Space separated list of names of jails 498jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 499jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 500jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 501 502# 503# To use rc's built-in jail infrastructure create entries for 504# each jail, specified in jail_list, with the following variables. 505# NOTE: replace 'example' with the jail's name. 506# 507#jail_example_rootdir="/usr/jail/default" # Jail's root directory 508#jail_example_hostname="default.domain.com" # Jail's hostname 509#jail_example_ip="192.168.0.10" # Jail's IP number 510#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 511#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 512#jail_example_devfs_enable="NO" # mount devfs in the jail 513#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 514#jail_example_procfs_enable="NO" # mount procfs in jail 515#jail_example_mount_enable="NO" # mount/umount jail's fs 516#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 517#jail_example_fstab="" # fstab(5) for mount/umount 518#jail_example_flags="-l -U root" # flags for jail(8) 519 520############################################################## 521### Define source_rc_confs, the mechanism used by /etc/rc.* ## 522### scripts to source rc_conf_files overrides safely. ## 523############################################################## 524 525if [ -z "${source_rc_confs_defined}" ]; then 526 source_rc_confs_defined=yes 527 source_rc_confs () { 528 local i sourced_files 529 for i in ${rc_conf_files}; do 530 case ${sourced_files} in 531 *:$i:*) 532 ;; 533 *) 534 sourced_files="${sourced_files}:$i:" 535 if [ -r $i ]; then 536 . $i 537 fi 538 ;; 539 esac 540 done 541 } 542fi 543