rc.conf revision 138889
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 138889 2004-12-15 12:39:28Z brian $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_debug="NO" # Set to YES to enable debugging output from rc.d 23rc_info="NO" # Enables display of informational messages at boot. 24rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 25swapfile="NO" # Set to name of swapfile if aux swapfile desired. 26apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 27apmd_enable="NO" # Run apmd to handle APM event from userland. 28apmd_flags="" # Flags to apmd (if enabled). 29devd_enable="YES" # Run devd, to trigger programs on device tree changes. 30kldxref_enable="NO" # Build linker.hints files with kldxref(8). 31kldxref_clobber="NO" # Overwrite old linker.hints at boot. 32kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 33pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 34pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 35pccard_beep="2" # pccard beep type. 36pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 37pccardd_flags="-z" # Additional flags for pccardd. 38pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 39pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 40removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 41tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 42tmpsize="20m" # Size of mfs /tmp if created 43tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 44varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 45varsize="32m" # Size of mfs /var if created 46varmfs_flags="-S" # Extra mount options for the mfs /var 47populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 48local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 49script_name_sep=" " # Change if your startup scripts' names contain spaces 50rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 51 52# Experimental - test before enabling 53gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 54gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 55gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 56gbde_lockdir="/etc" # Where to look for gbde lockfiles 57gbde_swap_enable="NO" # Set to YES to automatically initialize gbde swap 58 # devices listed in fstab with a random one-shot key 59 60root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 61fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 62background_fsck="YES" # Attempt to run fsck in the background where possible. 63background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 64netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 65extra_netfs_types="NO" # List of network extra filesystem types for delayed 66 # mount at startup (or NO). 67 68############################################################## 69### Network configuration sub-section ###################### 70############################################################## 71 72### Basic network and firewall/security options: ### 73hostname="" # Set this! 74nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 75dhclient_program="/sbin/dhclient" # Path to dhcp client program. 76dhclient_flags="" # Additional flags to pass to dhcp client. 77background_dhclient="NO" # Start dhcp client in the background. 78firewall_enable="NO" # Set to YES to enable firewall functionality 79firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 80firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 81firewall_quiet="NO" # Set to YES to suppress rule display 82firewall_logging="NO" # Set to YES to enable events logging 83firewall_flags="" # Flags passed to ipfw when type is a file 84ip_portrange_first="NO" # Set first dynamically allocated port 85ip_portrange_last="NO" # Set last dynamically allocated port 86ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 87ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 88ike_flags="" # Additional flags for IKE daemon 89ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 90ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 91natd_program="/sbin/natd" # path to natd, if you want a different one. 92natd_enable="NO" # Enable natd (if firewall_enable == YES). 93natd_interface="" # Public interface or IPaddress to use. 94natd_flags="" # Additional flags for natd. 95ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 96ipfilter_program="/sbin/ipf" # where the ipfilter program lives 97ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 98 # /usr/src/contrib/ipfilter/rules for examples 99ipfilter_flags="" # additional flags for ipfilter 100ipnat_enable="NO" # Set to YES to enable ipnat functionality 101ipnat_program="/sbin/ipnat" # where the ipnat program lives 102ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 103ipnat_flags="" # additional flags for ipnat 104ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 105ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 106ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 107ipfs_enable="NO" # Set to YES to enable saving and restoring 108 # of state tables at shutdown and boot 109ipfs_program="/sbin/ipfs" # where the ipfs program lives 110ipfs_flags="" # additional flags for ipfs 111pf_enable="NO" # Set to YES to enable packet filter (pf) 112pf_rules="/etc/pf.conf" # rules definition file for pf 113pf_program="/sbin/pfctl" # where the pfctl program lives 114pf_flags="" # additional flags for pfctl 115pflog_enable="NO" # Set to YES to enable packet filter logging 116pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 117pflog_program="/sbin/pflogd" # where the pflogd program lives 118pflog_flags="" # additional flags for pflogd 119tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 120log_in_vain="0" # >=1 to log connects to ports w/o listeners. 121tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 122# For the following option you need to have TCP_DROP_SYNFIN set in your 123# kernel. Please refer to LINT and NOTES for details. 124tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 125 # NOTE: this violates the TCP specification 126icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 127icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 128network_interfaces="auto" # List of network interfaces (or "auto"). 129cloned_interfaces="" # List of cloned network interfaces to create. 130#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 131ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 132#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 133#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 134#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 135# 136# If you have any sppp(4) interfaces above, you might also want to set 137# the following parameters. Refer to spppcontrol(8) for their meaning. 138sppp_interfaces="" # List of sppp interfaces. 139#sppp_interfaces="isp0" # example: sppp over ISDN 140#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 141gif_interfaces="NO" # List of GIF tunnels (or "NO"). 142#gif_interfaces="gif0 gif1" # Examples typically for a router. 143 # Choose correct tunnel addrs. 144#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 145#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 146 147# User ppp configuration. 148ppp_enable="NO" # Start user-ppp (or NO). 149ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 150ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 151 # For details see man page for ppp(8). Default is auto. 152ppp_nat="YES" # Use PPP's internal network address translation or NO. 153ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 154ppp_user="root" # Which user to run ppp as 155 156### Network daemon (miscellaneous) ### 157syslogd_enable="YES" # Run syslog daemon (or NO). 158syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 159syslogd_flags="-s" # Flags to syslogd (if enabled). 160inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 161inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 162inetd_flags="-wW -C 60" # Optional flags to inetd 163# 164# named. It may be possible to run named in a sandbox, man security for 165# details. 166# 167named_enable="NO" # Run named, the DNS server (or NO). 168named_program="/usr/sbin/named" # path to named, if you want a different one. 169named_flags="-u bind" # Flags for named 170named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 171named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 172named_chroot_autoupdate="YES" # Automatically install/update chrooted 173 # components of named. See /etc/rc.d/named. 174named_symlink_enable="YES" # Symlink the chrooted pid file 175 176# 177# kerberos. Do not run the admin daemons on slave servers 178# 179kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 180kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 181kadmind5_server_enable="NO" # Run kadmind (or NO) 182kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 183kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 184kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 185 186rwhod_enable="NO" # Run the rwho daemon (or NO). 187rwhod_flags="" # Flags for rwhod 188rarpd_enable="NO" # Run rarpd (or NO). 189rarpd_flags="" # Flags to rarpd. 190bootparamd_enable="NO" # Run bootparamd (or NO). 191bootparamd_flags="" # Flags to bootparamd 192pppoed_enable="NO" # Run the PPP over Ethernet daemon. 193pppoed_provider="*" # Provider and ppp(8) config file entry. 194pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 195pppoed_interface="fxp0" # The interface that pppoed runs on. 196sshd_enable="NO" # Enable sshd 197sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 198sshd_flags="" # Additional flags for sshd. 199 200### Network daemon (NFS): All need rpcbind_enable="YES" ### 201amd_enable="NO" # Run amd service with $amd_flags (or NO). 202amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 203amd_map_program="NO" # Can be set to "ypcat -k amd.master" 204nfs_client_enable="NO" # This host is an NFS client (or NO). 205nfs_access_cache="2" # Client cache timeout in seconds 206nfs_server_enable="NO" # This host is an NFS server (or NO). 207nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 208mountd_enable="NO" # Run mountd (or NO). 209mountd_flags="-r" # Flags to mountd (if NFS server enabled). 210weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 211nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 212nfs_bufpackets="" # bufspace (in packets) for client 213rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 214rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 215rpcbind_enable="NO" # Run the portmapper service (YES/NO). 216rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 217rpcbind_flags="" # Flags to rpcbind (if enabled). 218rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 219keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 220keyserv_flags="" # Flags to keyserv (if enabled). 221 222### Network Time Services options: ### 223timed_enable="NO" # Run the time daemon (or NO). 224timed_flags="" # Flags to timed (if enabled). 225ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 226ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 227ntpdate_flags="-b" # Flags to ntpdate (if enabled). 228ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 229ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 230ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 231ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 232 # Flags to ntpd (if enabled). 233 234# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 235nis_client_enable="NO" # We're an NIS client (or NO). 236nis_client_flags="" # Flags to ypbind (if enabled). 237nis_ypset_enable="NO" # Run ypset at boot time (or NO). 238nis_ypset_flags="" # Flags to ypset (if enabled). 239nis_server_enable="NO" # We're an NIS server (or NO). 240nis_server_flags="" # Flags to ypserv (if enabled). 241nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 242nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 243nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 244nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 245 246### Network routing options: ### 247defaultrouter="NO" # Set to default gateway (or NO). 248static_routes="" # Set to static route list (or leave empty). 249natm_static_routes="" # Set to static route list for NATM (or leave empty). 250gateway_enable="NO" # Set to YES if this host will be a gateway. 251router_enable="NO" # Set to YES to enable a routing daemon. 252router="/sbin/routed" # Name of routing daemon to use if enabled. 253router_flags="-q" # Flags for routing daemon. 254mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 255mrouted_flags="" # Flags for multicast routing daemon. 256ipxgateway_enable="NO" # Set to YES to enable IPX routing. 257ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 258ipxrouted_flags="" # Flags for IPX routing daemon. 259arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 260forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 261accept_sourceroute="NO" # accept source routed packets to us 262 263### ATM interface options: ### 264atm_enable="NO" # Configure ATM interfaces (or NO). 265#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 266#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 267#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 268#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 269#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 270#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 271atm_pvcs="" # Set to PVC list (or leave empty). 272atm_arps="" # Set to permanent ARP list (or leave empty). 273 274### ISDN interface options: (see also: /usr/share/examples/isdn) ### 275isdn_enable="NO" # Enable the ISDN subsystem (or NO). 276isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 277isdn_flags="-dn -d0x1f9" # Flags for isdnd 278isdn_ttype="cons25" # terminal type for fullscreen mode 279isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 280isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 281isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 282 283### Miscellaneous network options: ### 284icmp_bmcastecho="NO" # respond to broadcast ping packets 285 286### IPv6 options: ### 287ipv6_enable="NO" # Set to YES to set up for IPv6. 288ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 289ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 290#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 291ipv6_static_routes="" # Set to static route list (or leave empty). 292#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 293 # route toward loopback interface. 294#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 295ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 296ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 297ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 298ipv6_router_flags="" # Flags to IPv6 routing daemon. 299#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 300 # addrs. 301#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 302 # node, you should stop advertisement. 303#ipv6_network_interfaces="ed0 ep0" # Examples for router 304 # or static configuration for end node. 305 # Choose correct prefix value. 306#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 307#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 308#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 309#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 310ipv6_default_interface="NO" # Default output interface for scoped addrs. 311 # Now this works only for IPv6 link local 312 # multicast addrs. 313rtsol_flags="" # Flags to IPv6 router solicitation. 314rtadvd_enable="NO" # Set to YES to enable an IPv6 router 315 # advertisement daemon. If set to YES, 316 # this router becomes a possible candidate 317 # IPv6 default router for local subnets. 318rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 319mroute6d_enable="NO" # Do IPv6 multicast routing. 320mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 321 # routing daemon. You need to 322 # install it from package or 323 # port. 324mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 325stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 326 # tunneling interface. Specify this entry 327 # to enable 6to4 interface. 328stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 329 # to limit peer addr range. Effective value 330 # is 0-31. 331stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 332 # If you like, you can set "AUTO" for this. 333stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 334ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 335 # IPv6-to-IPv4 TCP translator. You also need 336 # faithd(8) setup. 337ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 338 # communication. (like ::ffff:a.b.c.d) 339ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 340 # functionality 341ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 342ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 343ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 344ipv6_firewall_logging="NO" # Set to YES to enable events logging 345ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 346ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 347 # see /usr/src/contrib/ipfilter/rules 348 # for examples 349ip6addrctl_enable="NO" # Set to YES to enable default address selection 350ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 351 352############################################################## 353### System console options ################################# 354############################################################## 355 356keyboard="" # keyboard device to use (default /dev/kbd0). 357keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 358keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 359keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 360keychange="NO" # function keys default values (or NO). 361cursor="NO" # cursor type {normal|blink|destructive} (or NO). 362scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 363font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 364font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 365font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 366blanktime="300" # blank time (in seconds) or "NO" to turn it off. 367saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 368moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 369 # specifically overriden in rc.conf(5). 370moused_enable="NO" # Run the mouse daemon. 371moused_type="auto" # See man page for rc.conf(5) for available settings. 372moused_port="/dev/psm0" # Set to your mouse port. 373moused_flags="" # Any additional flags to moused. 374mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 375 # language code table, specify alternative range 376 # start like mousechar_start=3, see vidcontrol(1) 377allscreens_flags="" # Set this vidcontrol mode for all virtual screens 378allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 379 380 381############################################################## 382### pcvt console driver options ############################ 383############################################################## 384 385pcvt_verbose="NO" # set to YES to enable verbose configuration messages 386pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 387pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 388pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 389pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 390pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 391pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 392pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 393pcvt_blanktime="NO" # blank time (in seconds) (or NO). 394pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 395pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 396pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 397 398 399############################################################## 400### Mail Transfer Agent (MTA) options ###################### 401############################################################## 402 403mta_start_script="/etc/rc.sendmail" 404 # Script to start your chosen MTA, called by /etc/rc. 405# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 406sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 407sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 408sendmail_procname="/usr/sbin/sendmail" # sendmail process name 409sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 410sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 411sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 412 # Flags for localhost-only MTA 413sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 414sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 415sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 416sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 417 # Flags for sendmail_msp_queue daemon. 418 419 420############################################################## 421### Miscellaneous administrative options ################### 422############################################################## 423 424cron_enable="YES" # Run the periodic job daemon. 425cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 426cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 427cron_flags="" # Which options to pass to the cron daemon. 428lpd_enable="NO" # Run the line printer daemon. 429lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 430lpd_flags="" # Flags to lpd (if enabled). 431usbd_enable="NO" # Run the usbd daemon. 432usbd_flags="" # Flags to usbd (if enabled). 433dumpdev="NO" # Device name to crashdump to (or NO). 434dumpdir="/var/crash" # Directory where crash dumps are to be stored 435savecore_flags="" # Used if dumpdev is enabled above, and present. 436enable_quotas="NO" # turn on quotas on startup (or NO). 437check_quotas="YES" # Check quotas on startup (or NO). 438accounting_enable="NO" # Turn on process accounting (or NO). 439ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 440ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 441sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 442linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 443svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 444osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 445clear_tmp_enable="NO" # Clear /tmp at startup. 446ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 447ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" 448 # shared library search paths 449ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 450 # a.out shared library search paths 451kern_securelevel_enable="NO" # kernel security level (see init(8)), 452kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 453lomac_enable="NO" # start lomac(4) security module at boot 454update_motd="YES" # update version info in /etc/motd (or NO) 455unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 456entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 457 # /var/db/entropy is preferred if / is not available. 458entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 459entropy_save_sz="2048" # Size of the entropy cache files. 460entropy_save_num="8" # Number of entropy cache files to save. 461harvest_interrupt="YES" # Entropy device harvests interrupt randomness 462harvest_ethernet="YES" # Entropy device harvests ethernet randomness 463harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 464dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 465watchdogd_enable="NO" # Start the software watchdog daemon 466devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 467 # devfs(8) rules. 468devfs_system_ruleset="" # The name of a ruleset to apply to /dev 469devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 470 # apply (must be mounted already, i.e. fstab(5)) 471performance_cx_lowest="LOW" # Online CPU idle state 472performance_throttle_state="HIGH" # Online throttling state 473economy_cx_lowest="LOW" # Offline CPU idle state 474economy_throttle_state="HIGH" # Offline throttling state 475virecover_enable="YES" # Perform housekeeping for the vi(1) editor 476ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 477bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 478 # ruleset file. 479 480############################################################## 481### Jail Configuration ####################################### 482############################################################## 483jail_enable="NO" # Set to NO to disable starting of any jails 484jail_list="" # Space separated list of names of jails 485jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 486jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 487jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 488 489# 490# To use rc's built-in jail infrastructure create entries for 491# each jail, specified in jail_list, with the following variables. 492# NOTE: replace 'example' with the jail's name. 493# 494#jail_example_rootdir="/usr/jail/default" # Jail's root directory 495#jail_example_hostname="default.domain.com" # Jail's hostname 496#jail_example_ip="192.168.0.10" # Jail's IP number 497#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 498#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 499#jail_example_devfs_enable="NO" # mount devfs in the jail 500#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 501#jail_example_procfs_enable="NO" # mount procfs in jail 502#jail_example_mount_enable="NO" # mount/umount jail's fs 503#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 504#jail_example_fstab="" # fstab(5) for mount/umount 505 506############################################################## 507### Define source_rc_confs, the mechanism used by /etc/rc.* ## 508### scripts to source rc_conf_files overrides safely. ## 509############################################################## 510 511if [ -z "${source_rc_confs_defined}" ]; then 512 source_rc_confs_defined=yes 513 source_rc_confs () { 514 local i sourced_files 515 for i in ${rc_conf_files}; do 516 case ${sourced_files} in 517 *:$i:*) 518 ;; 519 *) 520 sourced_files="${sourced_files}:$i:" 521 if [ -r $i ]; then 522 . $i 523 fi 524 ;; 525 esac 526 done 527 } 528fi 529