rc.conf revision 136447
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 136447 2004-10-12 18:45:15Z des $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_debug="NO" # Set to YES to enable debugging output from rc.d 23rc_info="NO" # Enables display of informational messages at boot. 24rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 25swapfile="NO" # Set to name of swapfile if aux swapfile desired. 26apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 27apmd_enable="NO" # Run apmd to handle APM event from userland. 28apmd_flags="" # Flags to apmd (if enabled). 29devd_enable="YES" # Run devd, to trigger programs on device tree changes. 30kldxref_enable="NO" # Build linker.hints files with kldxref(8). 31kldxref_clobber="NO" # Overwrite old linker.hints at boot. 32kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 33pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 34pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 35pccard_beep="2" # pccard beep type. 36pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 37pccardd_flags="-z" # Additional flags for pccardd. 38pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 39pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 40removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 41tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 42tmpsize="20m" # Size of mfs /tmp if created 43varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 44varsize="32m" # Size of mfs /var if created 45populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 46local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 47script_name_sep=" " # Change if your startup scripts' names contain spaces 48rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 49 50# Experimental - test before enabling 51gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 52gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 53gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 54gbde_lockdir="/etc" # Where to look for gbde lockfiles 55gbde_swap_enable="NO" # Set to YES to automatically initialize gbde swap 56 # devices listed in fstab with a random one-shot key 57 58fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 59background_fsck="YES" # Attempt to run fsck in the background where possible. 60background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 61netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 62extra_netfs_types="NO" # List of network extra filesystem types for delayed 63 # mount at startup (or NO). 64 65############################################################## 66### Network configuration sub-section ###################### 67############################################################## 68 69### Basic network and firewall/security options: ### 70hostname="" # Set this! 71nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 72dhclient_program="/sbin/dhclient" # Path to dhcp client program. 73dhclient_flags="" # Additional flags to pass to dhcp client. 74background_dhclient="NO" # Start dhcp client in the background. 75firewall_enable="NO" # Set to YES to enable firewall functionality 76firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 77firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 78firewall_quiet="NO" # Set to YES to suppress rule display 79firewall_logging="NO" # Set to YES to enable events logging 80firewall_flags="" # Flags passed to ipfw when type is a file 81ip_portrange_first="NO" # Set first dynamically allocated port 82ip_portrange_last="NO" # Set last dynamically allocated port 83ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 84ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 85ike_flags="" # Additional flags for IKE daemon 86ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 87ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 88natd_program="/sbin/natd" # path to natd, if you want a different one. 89natd_enable="NO" # Enable natd (if firewall_enable == YES). 90natd_interface="" # Public interface or IPaddress to use. 91natd_flags="" # Additional flags for natd. 92ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 93ipfilter_program="/sbin/ipf" # where the ipfilter program lives 94ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 95 # /usr/src/contrib/ipfilter/rules for examples 96ipfilter_flags="" # additional flags for ipfilter 97ipnat_enable="NO" # Set to YES to enable ipnat functionality 98ipnat_program="/sbin/ipnat" # where the ipnat program lives 99ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 100ipnat_flags="" # additional flags for ipnat 101ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 102ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 103ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 104ipfs_enable="NO" # Set to YES to enable saving and restoring 105 # of state tables at shutdown and boot 106ipfs_program="/sbin/ipfs" # where the ipfs program lives 107ipfs_flags="" # additional flags for ipfs 108pf_enable="NO" # Set to YES to enable packet filter (pf) 109pf_rules="/etc/pf.conf" # rules definition file for pf 110pf_program="/sbin/pfctl" # where the pfctl program lives 111pf_flags="" # additional flags for pfctl 112pflog_enable="NO" # Set to YES to enable packet filter logging 113pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 114pflog_program="/sbin/pflogd" # where the pflogd program lives 115pflog_flags="" # additional flags for pflogd 116tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 117log_in_vain="0" # >=1 to log connects to ports w/o listeners. 118tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 119# For the following option you need to have TCP_DROP_SYNFIN set in your 120# kernel. Please refer to LINT and NOTES for details. 121tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 122 # NOTE: this violates the TCP specification 123icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 124icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 125network_interfaces="auto" # List of network interfaces (or "auto"). 126cloned_interfaces="" # List of cloned network interfaces to create. 127#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 128ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 129#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 130#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 131# 132# If you have any sppp(4) interfaces above, you might also want to set 133# the following parameters. Refer to spppcontrol(8) for their meaning. 134sppp_interfaces="" # List of sppp interfaces. 135#sppp_interfaces="isp0" # example: sppp over ISDN 136#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 137gif_interfaces="NO" # List of GIF tunnels (or "NO"). 138#gif_interfaces="gif0 gif1" # Examples typically for a router. 139 # Choose correct tunnel addrs. 140#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 141#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 142 143# User ppp configuration. 144ppp_enable="NO" # Start user-ppp (or NO). 145ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 146 # For details see man page for ppp(8). Default is auto. 147ppp_nat="YES" # Use PPP's internal network address translation or NO. 148ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 149ppp_user="root" # Which user to run ppp as 150 151### Network daemon (miscellaneous) ### 152syslogd_enable="YES" # Run syslog daemon (or NO). 153syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 154syslogd_flags="-s" # Flags to syslogd (if enabled). 155inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 156inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 157inetd_flags="-wW -C 60" # Optional flags to inetd 158# 159# named. It may be possible to run named in a sandbox, man security for 160# details. 161# 162named_enable="NO" # Run named, the DNS server (or NO). 163named_program="/usr/sbin/named" # path to named, if you want a different one. 164named_flags="-u bind" # Flags for named 165named_pidfile="/var/run/named/pid" # Must set this in named.conf as well 166named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) 167named_chroot_autoupdate="YES" # Automatically install/update chrooted 168 # components of named. See /etc/rc.d/named. 169named_symlink_enable="YES" # Symlink the chrooted pid file 170 171# 172# kerberos. Do not run the admin daemons on slave servers 173# 174kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 175kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 176kadmind5_server_enable="NO" # Run kadmind (or NO) 177kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 178kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 179kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 180 181rwhod_enable="NO" # Run the rwho daemon (or NO). 182rwhod_flags="" # Flags for rwhod 183rarpd_enable="NO" # Run rarpd (or NO). 184rarpd_flags="" # Flags to rarpd. 185bootparamd_enable="NO" # Run bootparamd (or NO). 186bootparamd_flags="" # Flags to bootparamd 187pppoed_enable="NO" # Run the PPP over Ethernet daemon. 188pppoed_provider="*" # Provider and ppp(8) config file entry. 189pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 190pppoed_interface="fxp0" # The interface that pppoed runs on. 191sshd_enable="NO" # Enable sshd 192sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 193sshd_flags="" # Additional flags for sshd. 194 195### Network daemon (NFS): All need rpcbind_enable="YES" ### 196amd_enable="NO" # Run amd service with $amd_flags (or NO). 197amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 198amd_map_program="NO" # Can be set to "ypcat -k amd.master" 199nfs_client_enable="NO" # This host is an NFS client (or NO). 200nfs_access_cache="2" # Client cache timeout in seconds 201nfs_server_enable="NO" # This host is an NFS server (or NO). 202nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 203mountd_enable="NO" # Run mountd (or NO). 204mountd_flags="-r" # Flags to mountd (if NFS server enabled). 205weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 206nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 207nfs_bufpackets="" # bufspace (in packets) for client 208rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 209rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 210rpcbind_enable="NO" # Run the portmapper service (YES/NO). 211rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 212rpcbind_flags="" # Flags to rpcbind (if enabled). 213rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 214keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 215keyserv_flags="" # Flags to keyserv (if enabled). 216 217### Network Time Services options: ### 218timed_enable="NO" # Run the time daemon (or NO). 219timed_flags="" # Flags to timed (if enabled). 220ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 221ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 222ntpdate_flags="-b" # Flags to ntpdate (if enabled). 223ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 224ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 225ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 226ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 227 # Flags to ntpd (if enabled). 228 229# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 230nis_client_enable="NO" # We're an NIS client (or NO). 231nis_client_flags="" # Flags to ypbind (if enabled). 232nis_ypset_enable="NO" # Run ypset at boot time (or NO). 233nis_ypset_flags="" # Flags to ypset (if enabled). 234nis_server_enable="NO" # We're an NIS server (or NO). 235nis_server_flags="" # Flags to ypserv (if enabled). 236nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 237nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 238nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 239nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 240 241### Network routing options: ### 242defaultrouter="NO" # Set to default gateway (or NO). 243static_routes="" # Set to static route list (or leave empty). 244natm_static_routes="" # Set to static route list for NATM (or leave empty). 245gateway_enable="NO" # Set to YES if this host will be a gateway. 246router_enable="NO" # Set to YES to enable a routing daemon. 247router="/sbin/routed" # Name of routing daemon to use if enabled. 248router_flags="-q" # Flags for routing daemon. 249mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 250mrouted_flags="" # Flags for multicast routing daemon. 251ipxgateway_enable="NO" # Set to YES to enable IPX routing. 252ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 253ipxrouted_flags="" # Flags for IPX routing daemon. 254arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 255forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 256accept_sourceroute="NO" # accept source routed packets to us 257 258### ATM interface options: ### 259atm_enable="NO" # Configure ATM interfaces (or NO). 260#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 261#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 262#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 263#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 264#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 265#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 266atm_pvcs="" # Set to PVC list (or leave empty). 267atm_arps="" # Set to permanent ARP list (or leave empty). 268 269### ISDN interface options: (see also: /usr/share/examples/isdn) ### 270isdn_enable="NO" # Enable the ISDN subsystem (or NO). 271isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 272isdn_flags="-dn -d0x1f9" # Flags for isdnd 273isdn_ttype="cons25" # terminal type for fullscreen mode 274isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 275isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 276isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 277 278### Miscellaneous network options: ### 279icmp_bmcastecho="NO" # respond to broadcast ping packets 280 281### IPv6 options: ### 282ipv6_enable="NO" # Set to YES to set up for IPv6. 283ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 284ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 285#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 286ipv6_static_routes="" # Set to static route list (or leave empty). 287#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 288 # route toward loopback interface. 289#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 290ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 291ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 292ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 293ipv6_router_flags="" # Flags to IPv6 routing daemon. 294#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 295 # addrs. 296#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 297 # node, you should stop advertisement. 298#ipv6_network_interfaces="ed0 ep0" # Examples for router 299 # or static configuration for end node. 300 # Choose correct prefix value. 301#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 302#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 303#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 304#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 305ipv6_default_interface="NO" # Default output interface for scoped addrs. 306 # Now this works only for IPv6 link local 307 # multicast addrs. 308rtsol_flags="" # Flags to IPv6 router solicitation. 309rtadvd_enable="NO" # Set to YES to enable an IPv6 router 310 # advertisement daemon. If set to YES, 311 # this router becomes a possible candidate 312 # IPv6 default router for local subnets. 313rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 314mroute6d_enable="NO" # Do IPv6 multicast routing. 315mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 316 # routing daemon. You need to 317 # install it from package or 318 # port. 319mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 320stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 321 # tunneling interface. Specify this entry 322 # to enable 6to4 interface. 323stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 324 # to limit peer addr range. Effective value 325 # is 0-31. 326stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 327 # If you like, you can set "AUTO" for this. 328stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 329ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 330 # IPv6-to-IPv4 TCP translator. You also need 331 # faithd(8) setup. 332ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 333 # communication. (like ::ffff:a.b.c.d) 334ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 335 # functionality 336ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 337ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 338ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 339ipv6_firewall_logging="NO" # Set to YES to enable events logging 340ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 341ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 342 # see /usr/src/contrib/ipfilter/rules 343 # for examples 344ip6addrctl_enable="NO" # Set to YES to enable default address selection 345ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 346 347############################################################## 348### System console options ################################# 349############################################################## 350 351keyboard="" # keyboard device to use (default /dev/kbd0). 352keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 353keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 354keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 355keychange="NO" # function keys default values (or NO). 356cursor="NO" # cursor type {normal|blink|destructive} (or NO). 357scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 358font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 359font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 360font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 361blanktime="300" # blank time (in seconds) or "NO" to turn it off. 362saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 363moused_enable="NO" # Run the mouse daemon. 364moused_type="auto" # See man page for rc.conf(5) for available settings. 365moused_port="/dev/psm0" # Set to your mouse port. 366moused_flags="" # Any additional flags to moused. 367mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 368 # language code table, specify alternative range 369 # start like mousechar_start=3, see vidcontrol(1) 370allscreens_flags="" # Set this vidcontrol mode for all virtual screens 371allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 372 373 374############################################################## 375### pcvt console driver options ############################ 376############################################################## 377 378pcvt_verbose="NO" # set to YES to enable verbose configuration messages 379pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 380pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 381pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 382pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 383pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 384pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 385pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 386pcvt_blanktime="NO" # blank time (in seconds) (or NO). 387pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 388pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 389pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 390 391 392############################################################## 393### Mail Transfer Agent (MTA) options ###################### 394############################################################## 395 396mta_start_script="/etc/rc.sendmail" 397 # Script to start your chosen MTA, called by /etc/rc. 398# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 399sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 400sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 401sendmail_procname="/usr/sbin/sendmail" # sendmail process name 402sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 403sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 404sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 405 # Flags for localhost-only MTA 406sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 407sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 408sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 409sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 410 # Flags for sendmail_msp_queue daemon. 411 412 413############################################################## 414### Miscellaneous administrative options ################### 415############################################################## 416 417cron_enable="YES" # Run the periodic job daemon. 418cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 419cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 420cron_flags="" # Which options to pass to the cron daemon. 421lpd_enable="NO" # Run the line printer daemon. 422lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 423lpd_flags="" # Flags to lpd (if enabled). 424usbd_enable="NO" # Run the usbd daemon. 425usbd_flags="" # Flags to usbd (if enabled). 426dumpdev="NO" # Device name to crashdump to (or NO). 427dumpdir="/var/crash" # Directory where crash dumps are to be stored 428savecore_flags="" # Used if dumpdev is enabled above, and present. 429enable_quotas="NO" # turn on quotas on startup (or NO). 430check_quotas="YES" # Check quotas on startup (or NO). 431accounting_enable="NO" # Turn on process accounting (or NO). 432ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 433ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 434sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 435linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 436svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 437osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 438clear_tmp_enable="NO" # Clear /tmp at startup. 439ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 440ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/com 441pat/pkg" 442 # shared library search paths 443ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 444 # a.out shared library search paths 445kern_securelevel_enable="NO" # kernel security level (see init(8)), 446kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 447lomac_enable="NO" # start lomac(4) security module at boot 448update_motd="YES" # update version info in /etc/motd (or NO) 449start_vinum="NO" # set to YES to start vinum 450unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 451entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 452 # /var/db/entropy is preferred if / is not available. 453entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 454entropy_save_sz="2048" # Size of the entropy cache files. 455entropy_save_num="8" # Number of entropy cache files to save. 456harvest_interrupt="YES" # Entropy device harvests interrupt randomness 457harvest_ethernet="YES" # Entropy device harvests ethernet randomness 458harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 459dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 460watchdogd_enable="NO" # Start the software watchdog daemon 461devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 462 # devfs(8) rules. 463devfs_system_ruleset="" # The name of a ruleset to apply to /dev 464devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 465 # apply (must be mounted already, i.e. fstab(5)) 466performance_cx_lowest="LOW" # Online CPU idle state 467performance_throttle_state="HIGH" # Online throttling state 468economy_cx_lowest="LOW" # Offline CPU idle state 469economy_throttle_state="HIGH" # Offline throttling state 470virecover_enable="YES" # Perform housekeeping for the vi(1) editor 471ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 472bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 473 # ruleset file. 474 475############################################################## 476### Jail Configuration ####################################### 477############################################################## 478jail_enable="NO" # Set to NO to disable starting of any jails 479jail_list="" # Space separated list of names of jails 480jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 481jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 482jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 483 484# 485# To use rc's built-in jail infrastructure create entries for 486# each jail, specified in jail_list, with the following variables. 487# NOTE: replace 'example' with the jail's name. 488# 489#jail_example_rootdir="/usr/jail/default" # Jail's root directory 490#jail_example_hostname="default.domain.com" # Jail's hostname 491#jail_example_ip="192.168.0.10" # Jail's IP number 492#jail_example_exec="/bin/sh /etc/rc" # command to execute in jail 493#jail_example_devfs_enable="NO" # mount devfs in the jail 494#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 495#jail_example_procfs_enable="NO" # mount procfs in jail 496#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 497 498############################################################## 499### Define source_rc_confs, the mechanism used by /etc/rc.* ## 500### scripts to source rc_conf_files overrides safely. ## 501############################################################## 502 503if [ -z "${source_rc_confs_defined}" ]; then 504 source_rc_confs_defined=yes 505 source_rc_confs () { 506 local i sourced_files 507 for i in ${rc_conf_files}; do 508 case ${sourced_files} in 509 *:$i:*) 510 ;; 511 *) 512 sourced_files="${sourced_files}:$i:" 513 if [ -r $i ]; then 514 . $i 515 fi 516 ;; 517 esac 518 done 519 } 520fi 521