rc.conf revision 127342
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 127342 2004-03-23 22:30:15Z mlaier $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_debug="NO" # Set to YES to enable debugging output from rc.d 23rc_info="NO" # Enables display of informational messages at boot. 24rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 25swapfile="NO" # Set to name of swapfile if aux swapfile desired. 26apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 27apmd_enable="NO" # Run apmd to handle APM event from userland. 28apmd_flags="" # Flags to apmd (if enabled). 29devd_enable="NO" # Run devd, to trigger programs on device tree changes. 30kldxref_enable="NO" # Build linker.hints files with kldxref(8). 31kldxref_clobber="NO" # Overwrite old linker.hints at boot. 32kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 33pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 34pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 35pccard_beep="2" # pccard beep type. 36pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 37pccardd_flags="-z" # Additional flags for pccardd. 38pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 39pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 40removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 41local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 42script_name_sep=" " # Change if your startup scripts' names contain spaces 43rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 44 45# Experimental - test before enabling 46gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 47gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 48gbde_swap_enable="NO" # Set to YES to automatically initialize gbde swap 49 # devices listed in fstab with a random one-shot key 50 51fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 52background_fsck="YES" # Attempt to run fsck in the background where possible. 53background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 54netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 55extra_netfs_types="NO" # List of network extra filesystem types for delayed 56 # mount at startup (or NO). 57 58############################################################## 59### Network configuration sub-section ###################### 60############################################################## 61 62### Basic network and firewall/security options: ### 63hostname="" # Set this! 64nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 65dhclient_program="/sbin/dhclient" # Path to dhcp client program. 66dhclient_flags="" # Additional flags to pass to dhcp client. 67background_dhclient="NO" # Start dhcp client in the background. 68firewall_enable="NO" # Set to YES to enable firewall functionality 69firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 70firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 71firewall_quiet="NO" # Set to YES to suppress rule display 72firewall_logging="NO" # Set to YES to enable events logging 73firewall_flags="" # Flags passed to ipfw when type is a file 74ip_portrange_first="NO" # Set first dynamically allocated port 75ip_portrange_last="NO" # Set last dynamically allocated port 76ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 77ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 78ike_flags="" # Additional flags for IKE daemon 79ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 80ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 81natd_program="/sbin/natd" # path to natd, if you want a different one. 82natd_enable="NO" # Enable natd (if firewall_enable == YES). 83natd_interface="" # Public interface or IPaddress to use. 84natd_flags="" # Additional flags for natd. 85ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 86ipfilter_program="/sbin/ipf" # where the ipfilter program lives 87ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 88 # /usr/src/contrib/ipfilter/rules for examples 89ipfilter_flags="" # additional flags for ipfilter 90ipnat_enable="NO" # Set to YES to enable ipnat functionality 91ipnat_program="/sbin/ipnat" # where the ipnat program lives 92ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 93ipnat_flags="" # additional flags for ipnat 94ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 95ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 96ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 97ipfs_enable="NO" # Set to YES to enable saving and restoring 98 # of state tables at shutdown and boot 99ipfs_program="/sbin/ipfs" # where the ipfs program lives 100ipfs_flags="" # additional flags for ipfs 101pf_enable="NO" # Set to YES to enable packet filter (pf) 102pf_rules="/etc/pf.conf" # rules definition file for pf 103pf_program="/sbin/pfctl" # where the pfctl program lives 104pf_flags="" # additional flags for pfctl 105tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 106log_in_vain="0" # >=1 to log connects to ports w/o listeners. 107tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 108# For the following option you need to have TCP_DROP_SYNFIN set in your 109# kernel. Please refer to LINT and NOTES for details. 110tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 111 # NOTE: this violates the TCP specification 112icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 113icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 114network_interfaces="auto" # List of network interfaces (or "auto"). 115cloned_interfaces="" # List of cloned network interfaces to create. 116#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 117ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 118#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 119#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 120# 121# If you have any sppp(4) interfaces above, you might also want to set 122# the following parameters. Refer to spppcontrol(8) for their meaning. 123sppp_interfaces="" # List of sppp interfaces. 124#sppp_interfaces="isp0" # example: sppp over ISDN 125#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 126gif_interfaces="NO" # List of GIF tunnels (or "NO"). 127#gif_interfaces="gif0 gif1" # Examples typically for a router. 128 # Choose correct tunnel addrs. 129#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 130#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 131 132# User ppp configuration. 133ppp_enable="NO" # Start user-ppp (or NO). 134ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 135 # For details see man page for ppp(8). Default is auto. 136ppp_nat="YES" # Use PPP's internal network address translation or NO. 137ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 138ppp_user="root" # Which user to run ppp as 139 140### Network daemon (miscellaneous) ### 141syslogd_enable="YES" # Run syslog daemon (or NO). 142syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 143syslogd_flags="-s" # Flags to syslogd (if enabled). 144#syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 145inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 146inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 147inetd_flags="-wW -C 60" # Optional flags to inetd 148# 149# named. It may be possible to run named in a sandbox, man security for 150# details. 151# 152named_enable="NO" # Run named, the DNS server (or NO). 153named_program="/usr/sbin/named" # path to named, if you want a different one. 154named_flags="-u bind" # Flags for named 155named_pidfile="/var/run/named/pid" # Pid file 156named_chrootdir="" # Chroot directory (or "" not to auto-chroot it) 157named_chroot_autoupdate="YES" # Automatically install/update chrooted 158 # components of named. See /etc/rc.d/named. 159named_symlink_enable="YES" # Symlink ${named_pidfile} and /var/run/ndc 160 # to their chrooted counterparts. 161 162# 163# kerberos. Do not run the admin daemons on slave servers 164# 165kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 166kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 167kadmind5_server_enable="NO" # Run kadmind (or NO) 168kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 169kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 170kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 171 172rwhod_enable="NO" # Run the rwho daemon (or NO). 173rwhod_flags="" # Flags for rwhod 174rarpd_enable="NO" # Run rarpd (or NO). 175rarpd_flags="" # Flags to rarpd. 176bootparamd_enable="NO" # Run bootparamd (or NO). 177bootparamd_flags="" # Flags to bootparamd 178pppoed_enable="NO" # Run the PPP over Ethernet daemon. 179pppoed_provider="*" # Provider and ppp(8) config file entry. 180pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 181pppoed_interface="fxp0" # The interface that pppoed runs on. 182sshd_enable="NO" # Enable sshd 183sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 184sshd_flags="" # Additional flags for sshd. 185 186### Network daemon (NFS): All need rpcbind_enable="YES" ### 187amd_enable="NO" # Run amd service with $amd_flags (or NO). 188amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 189amd_map_program="NO" # Can be set to "ypcat -k amd.master" 190nfs_client_enable="NO" # This host is an NFS client (or NO). 191nfs_access_cache="2" # Client cache timeout in seconds 192nfs_server_enable="NO" # This host is an NFS server (or NO). 193nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 194mountd_enable="NO" # Run mountd (or NO). 195mountd_flags="-r" # Flags to mountd (if NFS server enabled). 196weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 197nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 198nfs_bufpackets="" # bufspace (in packets) for client 199rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 200rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 201rpcbind_enable="NO" # Run the portmapper service (YES/NO). 202rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 203rpcbind_flags="" # Flags to rpcbind (if enabled). 204rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 205keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 206keyserv_flags="" # Flags to keyserv (if enabled). 207 208### Network Time Services options: ### 209timed_enable="NO" # Run the time daemon (or NO). 210timed_flags="" # Flags to timed (if enabled). 211ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 212ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 213ntpdate_flags="-b" # Flags to ntpdate (if enabled). 214ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 215ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 216ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 217 # Flags to ntpd (if enabled). 218 219# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 220nis_client_enable="NO" # We're an NIS client (or NO). 221nis_client_flags="" # Flags to ypbind (if enabled). 222nis_ypset_enable="NO" # Run ypset at boot time (or NO). 223nis_ypset_flags="" # Flags to ypset (if enabled). 224nis_server_enable="NO" # We're an NIS server (or NO). 225nis_server_flags="" # Flags to ypserv (if enabled). 226nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 227nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 228nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 229nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 230 231### Network routing options: ### 232defaultrouter="NO" # Set to default gateway (or NO). 233static_routes="" # Set to static route list (or leave empty). 234natm_static_routes="" # Set to static route list for NATM (or leave empty). 235gateway_enable="NO" # Set to YES if this host will be a gateway. 236router_enable="NO" # Set to YES to enable a routing daemon. 237router="/sbin/routed" # Name of routing daemon to use if enabled. 238router_flags="-q" # Flags for routing daemon. 239mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 240mrouted_flags="" # Flags for multicast routing daemon. 241ipxgateway_enable="NO" # Set to YES to enable IPX routing. 242ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 243ipxrouted_flags="" # Flags for IPX routing daemon. 244arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 245forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 246accept_sourceroute="NO" # accept source routed packets to us 247 248### ATM interface options: ### 249atm_enable="NO" # Configure ATM interfaces (or NO). 250#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 251#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 252#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 253#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 254#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 255#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 256atm_pvcs="" # Set to PVC list (or leave empty). 257atm_arps="" # Set to permanent ARP list (or leave empty). 258 259### ISDN interface options: (see also: /usr/share/examples/isdn) ### 260isdn_enable="NO" # Enable the ISDN subsystem (or NO). 261isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 262isdn_flags="-dn -d0x1f9" # Flags for isdnd 263isdn_ttype="cons25" # terminal type for fullscreen mode 264isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 265isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 266isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 267 268### Miscellaneous network options: ### 269icmp_bmcastecho="NO" # respond to broadcast ping packets 270 271### IPv6 options: ### 272ipv6_enable="NO" # Set to YES to set up for IPv6. 273ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 274ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 275#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 276ipv6_static_routes="" # Set to static route list (or leave empty). 277#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 278 # route toward loopback interface. 279#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 280ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 281ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 282ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 283ipv6_router_flags="" # Flags to IPv6 routing daemon. 284#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 285 # addrs. 286#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 287 # node, you should stop advertisement. 288#ipv6_network_interfaces="ed0 ep0" # Examples for router 289 # or static configuration for end node. 290 # Choose correct prefix value. 291#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 292#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 293#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 294#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 295ipv6_default_interface="NO" # Default output interface for scoped addrs. 296 # Now this works only for IPv6 link local 297 # multicast addrs. 298rtsol_flags="" # Flags to IPv6 router solicitation. 299rtadvd_enable="NO" # Set to YES to enable an IPv6 router 300 # advertisement daemon. If set to YES, 301 # this router becomes a possible candidate 302 # IPv6 default router for local subnets. 303rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 304mroute6d_enable="NO" # Do IPv6 multicast routing. 305mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 306 # routing daemon. You need to 307 # install it from package or 308 # port. 309mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 310stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 311 # tunneling interface. Specify this entry 312 # to enable 6to4 interface. 313stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 314 # to limit peer addr range. Effective value 315 # is 0-31. 316stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 317 # If you like, you can set "AUTO" for this. 318stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 319ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 320 # IPv6-to-IPv4 TCP translator. You also need 321 # faithd(8) setup. 322ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 323 # communication. (like ::ffff:a.b.c.d) 324ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 325 # functionality 326ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 327ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 328ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 329ipv6_firewall_logging="NO" # Set to YES to enable events logging 330ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 331ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 332 # see /usr/src/contrib/ipfilter/rules 333 # for examples 334 335############################################################## 336### System console options ################################# 337############################################################## 338 339keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 340keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 341keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 342keychange="NO" # function keys default values (or NO). 343cursor="NO" # cursor type {normal|blink|destructive} (or NO). 344scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 345font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 346font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 347font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 348blanktime="300" # blank time (in seconds) or "NO" to turn it off. 349saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 350moused_enable="NO" # Run the mouse daemon. 351moused_type="auto" # See man page for rc.conf(5) for available settings. 352moused_port="/dev/psm0" # Set to your mouse port. 353moused_flags="" # Any additional flags to moused. 354mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 355 # language code table, specify alternative range 356 # start like mousechar_start=3, see vidcontrol(1) 357allscreens_flags="" # Set this vidcontrol mode for all virtual screens 358allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 359 360 361############################################################## 362### pcvt console driver options ############################ 363############################################################## 364 365pcvt_verbose="NO" # set to YES to enable verbose configuration messages 366pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 367pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 368pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 369pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 370pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 371pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 372pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 373pcvt_blanktime="NO" # blank time (in seconds) (or NO). 374pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 375pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 376pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 377 378 379############################################################## 380### Mail Transfer Agent (MTA) options ###################### 381############################################################## 382 383mta_start_script="/etc/rc.sendmail" 384 # Script to start your chosen MTA, called by /etc/rc. 385# Settings for /etc/rc.sendmail: 386sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 387sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 388sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 389sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 390 # Flags for localhost-only MTA 391sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 392sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 393sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 394sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 395 # Flags for sendmail_msp_queue daemon. 396 397 398############################################################## 399### Miscellaneous administrative options ################### 400############################################################## 401 402cron_enable="YES" # Run the periodic job daemon. 403cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 404cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 405cron_flags="" # Which options to pass to the cron daemon. 406lpd_enable="NO" # Run the line printer daemon. 407lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 408lpd_flags="" # Flags to lpd (if enabled). 409usbd_enable="NO" # Run the usbd daemon. 410usbd_flags="" # Flags to usbd (if enabled). 411dumpdev="NO" # Device name to crashdump to (or NO). 412dumpdir="/var/crash" # Directory where crash dumps are to be stored 413savecore_flags="" # Used if dumpdev is enabled above, and present. 414enable_quotas="NO" # turn on quotas on startup (or NO). 415check_quotas="YES" # Check quotas on startup (or NO). 416accounting_enable="NO" # Turn on process accounting (or NO). 417ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 418ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 419sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 420linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 421svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 422osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 423clear_tmp_enable="NO" # Clear /tmp at startup. 424ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 425ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 426 # shared library search paths 427ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 428 # a.out shared library search paths 429kern_securelevel_enable="NO" # kernel security level (see init(8)), 430kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 431lomac_enable="NO" # start lomac(4) security module at boot 432update_motd="YES" # update version info in /etc/motd (or NO) 433start_vinum="NO" # set to YES to start vinum 434unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 435entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 436 # /var/db/entropy is preferred if / is not available. 437entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 438entropy_save_sz="2048" # Size of the entropy cache files. 439entropy_save_num="8" # Number of entropy cache files to save. 440harvest_interrupt="YES" # Entropy device harvests interrupt randomness 441harvest_ethernet="YES" # Entropy device harvests ethernet randomness 442harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 443dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 444watchdogd_enable="NO" # Start the software watchdog daemon 445devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 446 # devfs(8) rules. 447devfs_system_ruleset="" # The name of a ruleset to apply to /dev 448performance_cx_lowest="HIGH" # Online CPU idle state 449performance_throttle_state="HIGH" # Online throttling state 450economy_cx_lowest="LOW" # Offline CPU idle state 451economy_throttle_state="HIGH" # Offline throttling state 452virecover_enable="YES" # Perform housekeeping for the vi(1) editor 453 454############################################################## 455### Jail Configuration ####################################### 456############################################################## 457jail_enable="NO" # Set to NO to disable starting of any jails 458jail_list="" # Space separated list of names of jails 459jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 460jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 461jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 462 463# 464# To use rc's built-in jail infrastructure create entries for 465# each jail, specified in jail_list, with the following variables. 466# NOTE: replace 'example' with the jail's name. 467# 468#jail_example_rootdir="/usr/jail/default" # Jail's root directory 469#jail_example_hostname="default.domain.com" # Jail's hostname 470#jail_example_ip="192.168.0.10" # Jail's IP number 471#jail_example_exec="/bin/sh /etc/rc" # command to execute in jail 472#jail_example_devfs_enable="NO" # mount devfs in the jail 473#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail 474#jail_example_procfs_enable="NO" # mount procfs in jail 475#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail 476 477############################################################## 478### Define source_rc_confs, the mechanism used by /etc/rc.* ## 479### scripts to source rc_conf_files overrides safely. ## 480############################################################## 481 482if [ -z "${source_rc_confs_defined}" ]; then 483 source_rc_confs_defined=yes 484 source_rc_confs () { 485 local i sourced_files 486 for i in ${rc_conf_files}; do 487 case ${sourced_files} in 488 *:$i:*) 489 ;; 490 *) 491 sourced_files="${sourced_files}:$i:" 492 if [ -r $i ]; then 493 . $i 494 fi 495 ;; 496 esac 497 done 498 } 499fi 500