rc.conf revision 111982
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 111982 2003-03-08 09:50:11Z markm $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_ng="YES" # Set to NO to disable new-style rc scripts. 23rc_debug="NO" # Set to YES to enable debugging output from rc.d 24rc_info="YES" # Enables display of informational messages at boot. 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 28apmd_enable="NO" # Run apmd to handle APM event from userland. 29apmd_flags="" # Flags to apmd (if enabled). 30devd_enable="NO" # Run devd, to trigger programs on device tree changes. 31pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 32pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 33pccard_beep="2" # pccard beep type. 34pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 35pccardd_flags="-z" # Additional flags for pccardd. 36pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 37pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 38removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 39local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 40script_name_sep=" " # Change if your startup scripts' names contain spaces 41rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 42fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 43background_fsck="YES" # Attempt to run fsck in the background where possible. 44background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 45extra_netfs_types="NO" # List of network extra filesystem types for delayed 46 # mount at startup (or NO). 47 48############################################################## 49### Network configuration sub-section ###################### 50############################################################## 51 52### Basic network and firewall/security options: ### 53hostname="" # Set this! 54nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 55dhcp_program="/sbin/dhclient" # Path to dhcp client program. 56dhcp_flags="" # Additional flags to pass to dhcp client. 57firewall_enable="NO" # Set to YES to enable firewall functionality 58firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 59firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 60firewall_quiet="NO" # Set to YES to suppress rule display 61firewall_logging="NO" # Set to YES to enable events logging 62firewall_flags="" # Flags passed to ipfw when type is a file 63ip_portrange_first="NO" # Set first dynamically allocated port 64ip_portrange_last="NO" # Set last dynamically allocated port 65ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 66ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 67natd_program="/sbin/natd" # path to natd, if you want a different one. 68natd_enable="NO" # Enable natd (if firewall_enable == YES). 69natd_interface="" # Public interface or IPaddress to use. 70natd_flags="" # Additional flags for natd. 71ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 72ipfilter_program="/sbin/ipf" # where the ipfilter program lives 73ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 74 # /usr/src/contrib/ipfilter/rules for examples 75ipfilter_flags="" # additional flags for ipfilter 76ipnat_enable="NO" # Set to YES to enable ipnat functionality 77ipnat_program="/sbin/ipnat" # where the ipnat program lives 78ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 79ipnat_flags="" # additional flags for ipnat 80ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 81ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 82ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 83ipfs_enable="NO" # Set to YES to enable saving and restoring 84 # of state tables at shutdown and boot 85ipfs_program="/sbin/ipfs" # where the ipfs program lives 86ipfs_flags="" # additional flags for ipfs 87tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 88log_in_vain="0" # >=1 to log connects to ports w/o listeners. 89tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 90# For the following option you need to have TCP_DROP_SYNFIN set in your 91# kernel. Please refer to LINT and NOTES for details. 92tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 93 # NOTE: this violates the TCP specification 94icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 95icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 96network_interfaces="auto" # List of network interfaces (or "auto"). 97cloned_interfaces="" # List of cloned network interfaces to create. 98#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 99ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 100#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 101#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 102# 103# If you have any sppp(4) interfaces above, you might also want to set 104# the following parameters. Refer to spppcontrol(8) for their meaning. 105sppp_interfaces="" # List of sppp interfaces. 106#sppp_interfaces="isp0" # example: sppp over ISDN 107#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 108gif_interfaces="NO" # List of GIF tunnels (or "NO"). 109#gif_interfaces="gif0 gif1" # Examples typically for a router. 110 # Choose correct tunnel addrs. 111#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 112#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 113 114# User ppp configuration. 115ppp_enable="NO" # Start user-ppp (or NO). 116ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 117 # For details see man page for ppp(8). Default is auto. 118ppp_nat="YES" # Use PPP's internal network address translation or NO. 119ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 120ppp_user="root" # Which user to run ppp as 121 122### Network daemon (miscellaneous) ### 123syslogd_enable="YES" # Run syslog daemon (or NO). 124syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 125syslogd_flags="-s" # Flags to syslogd (if enabled). 126#syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 127inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 128inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 129inetd_flags="-wW" # Optional flags to inetd 130# 131# named. It may be possible to run named in a sandbox, man security for 132# details. 133# 134named_rcng="NO" # XXX Temporary. Enable to use new rc 135 # functionality in support of named. See 136 # variables below. 137named_enable="NO" # Run named, the DNS server (or NO). 138named_program="/usr/sbin/named" # path to named, if you want a different one. 139named_flags="-u bind -g bind" # Flags for named 140named_pidfile="/var/run/named/pid" # Pid file 141named_chrootdir="" # Chroot directory (or "" not to auto-chroot it) 142named_chroot_autoupdate="YES" # Automatically install/update chrooted 143 # components of named. See /etc/rc.d/named. 144named_symlink_enable="YES" # Symlink /var/run/named.pid and /var/run/ndc 145 # to their chrooted counterparts. 146 147# 148# kerberos. Do not run the admin daemons on slave servers 149# 150kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 151kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 152kadmind5_server_enable="NO" # Run kadmind (or NO) 153kadmind5_server="/usr/libexec/k5admind" # path to kerberos 5 admin daemon 154kerberos_stash="NO" # Is the kerberos master key stashed? 155 156rwhod_enable="NO" # Run the rwho daemon (or NO). 157rwhod_flags="" # Flags for rwhod 158rarpd_enable="NO" # Run rarpd (or NO). 159rarpd_flags="" # Flags to rarpd. 160bootparamd_enable="NO" # Run bootparamd (or NO). 161bootparamd_flags="" # Flags to bootparamd 162xtend_enable="NO" # Run the X-10 power controller daemon. 163xtend_flags="" # Flags to xtend (if enabled). 164pppoed_enable="NO" # Run the PPP over Ethernet daemon. 165pppoed_provider="*" # Provider and ppp(8) config file entry. 166pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 167pppoed_interface="fxp0" # The interface that pppoed runs on. 168sshd_enable="NO" # Enable sshd 169sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 170sshd_flags="" # Additional flags for sshd. 171 172### Network daemon (NFS): All need rpcbind_enable="YES" ### 173amd_enable="NO" # Run amd service with $amd_flags (or NO). 174amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 175amd_map_program="NO" # Can be set to "ypcat -k amd.master" 176nfs_client_enable="NO" # This host is an NFS client (or NO). 177nfs_access_cache="2" # Client cache timeout in seconds 178nfs_server_enable="NO" # This host is an NFS server (or NO). 179nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 180mountd_enable="NO" # Run mountd (or NO). 181mountd_flags="-r" # Flags to mountd (if NFS server enabled). 182weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 183nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 184nfs_bufpackets="" # bufspace (in packets) for client 185rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 186rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 187rpcbind_enable="NO" # Run the portmapper service (YES/NO). 188rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 189rpcbind_flags="" # Flags to rpcbind (if enabled). 190rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 191keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 192keyserv_flags="" # Flags to keyserv (if enabled). 193 194### Network Time Services options: ### 195timed_enable="NO" # Run the time daemon (or NO). 196timed_flags="" # Flags to timed (if enabled). 197ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 198ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 199ntpdate_flags="-b" # Flags to ntpdate (if enabled). 200ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 201ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 202ntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 203 204# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 205nis_client_enable="NO" # We're an NIS client (or NO). 206nis_client_flags="" # Flags to ypbind (if enabled). 207nis_ypset_enable="NO" # Run ypset at boot time (or NO). 208nis_ypset_flags="" # Flags to ypset (if enabled). 209nis_server_enable="NO" # We're an NIS server (or NO). 210nis_server_flags="" # Flags to ypserv (if enabled). 211nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 212nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 213nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 214nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 215 216### Network routing options: ### 217defaultrouter="NO" # Set to default gateway (or NO). 218static_routes="" # Set to static route list (or leave empty). 219gateway_enable="NO" # Set to YES if this host will be a gateway. 220router_enable="NO" # Set to YES to enable a routing daemon. 221router="/sbin/routed" # Name of routing daemon to use if enabled. 222router_flags="-q" # Flags for routing daemon. 223mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 224mrouted_flags="" # Flags for multicast routing daemon. 225ipxgateway_enable="NO" # Set to YES to enable IPX routing. 226ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 227ipxrouted_flags="" # Flags for IPX routing daemon. 228arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 229forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 230accept_sourceroute="NO" # accept source routed packets to us 231 232### ATM interface options: ### 233atm_enable="NO" # Configure ATM interfaces (or NO). 234#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 235#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 236#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 237#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 238#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 239#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 240atm_pvcs="" # Set to PVC list (or leave empty). 241atm_arps="" # Set to permanent ARP list (or leave empty). 242 243### ISDN interface options: (see also: /usr/share/examples/isdn) ### 244isdn_enable="NO" # Enable the ISDN subsystem (or NO). 245isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 246isdn_flags="-dn -d0x1f9" # Flags for isdnd 247isdn_ttype="cons25" # terminal type for fullscreen mode 248isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 249isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 250isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 251 252### Miscellaneous network options: ### 253icmp_bmcastecho="NO" # respond to broadcast ping packets 254 255### IPv6 options: ### 256ipv6_enable="NO" # Set to YES to set up for IPv6. 257ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 258ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 259#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 260ipv6_static_routes="" # Set to static route list (or leave empty). 261#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 262 # route toward loopback interface. 263#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 264ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 265ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 266ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 267ipv6_router_flags="" # Flags to IPv6 routing daemon. 268#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 269 # addrs. 270#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 271 # node, you should stop advertisement. 272#ipv6_network_interfaces="ed0 ep0" # Examples for router 273 # or static configuration for end node. 274 # Choose correct prefix value. 275#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 276#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 277#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 278#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 279ipv6_default_interface="NO" # Default output interface for scoped addrs. 280 # Now this works only for IPv6 link local 281 # multicast addrs. 282rtadvd_enable="NO" # Set to YES to enable an IPv6 router 283 # advertisement daemon. If set to YES, 284 # this router becomes a possible candidate 285 # IPv6 default router for local subnets. 286rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 287mroute6d_enable="NO" # Do IPv6 multicast routing. 288mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 289 # routing daemon. You need to 290 # install it from package or 291 # port. 292mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 293stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 294 # tunneling interface. Specify this entry 295 # to enable 6to4 interface. 296stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 297 # to limit peer addr range. Effective value 298 # is 0-31. 299stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 300 # If you like, you can set "AUTO" for this. 301stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 302ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 303 # IPv6-to-IPv4 TCP translator. You also need 304 # faithd(8) setup. 305ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 306 # communication. (like ::ffff:a.b.c.d) 307ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 308 # functionality 309ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 310ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 311ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 312ipv6_firewall_logging="NO" # Set to YES to enable events logging 313ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 314ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 315 # see /usr/src/contrib/ipfilter/rules 316 # for examples 317 318############################################################## 319### System console options ################################# 320############################################################## 321 322keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 323keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 324keybell="NO" # bell to duration.pitch or normal or visual (or NO). 325keychange="NO" # function keys default values (or NO). 326cursor="NO" # cursor type {normal|blink|destructive} (or NO). 327scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 328font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 329font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 330font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 331blanktime="300" # blank time (in seconds) or "NO" to turn it off. 332saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 333moused_enable="NO" # Run the mouse daemon. 334moused_type="auto" # See man page for rc.conf(5) for available settings. 335moused_port="/dev/psm0" # Set to your mouse port. 336moused_flags="" # Any additional flags to moused. 337mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 338 # language code table, specify alternative range 339 # start like mousechar_start=3, see vidcontrol(1) 340allscreens_flags="" # Set this vidcontrol mode for all virtual screens 341allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 342 343 344############################################################## 345### pcvt console driver options ############################ 346############################################################## 347 348pcvt_verbose="NO" # set to YES to enable verbose configuration messages 349pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 350pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 351pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 352pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 353pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 354pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 355pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 356pcvt_blanktime="NO" # blank time (in seconds) (or NO). 357pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 358pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 359pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 360 361 362############################################################## 363### Mail Transfer Agent (MTA) options ###################### 364############################################################## 365 366mta_start_script="/etc/rc.sendmail" 367 # Script to start your chosen MTA, called by /etc/rc. 368# Settings for /etc/rc.sendmail: 369sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 370sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 371sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 372sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 373 # Flags for localhost-only MTA 374sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 375sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 376sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 377sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 378 # Flags for sendmail_msp_queue daemon. 379 380 381############################################################## 382### Miscellaneous administrative options ################### 383############################################################## 384 385cron_enable="YES" # Run the periodic job daemon. 386cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 387cron_flags="" # Which options to pass to the cron daemon. 388lpd_enable="NO" # Run the line printer daemon. 389lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 390lpd_flags="" # Flags to lpd (if enabled). 391usbd_enable="NO" # Run the usbd daemon. 392usbd_flags="" # Flags to usbd (if enabled). 393dumpdev="NO" # Device name to crashdump to (or NO). 394dumpdir="/var/crash" # Directory where crash dumps are to be stored 395savecore_flags="" # Used if dumpdev is enabled above, and present. 396enable_quotas="NO" # turn on quotas on startup (or NO). 397check_quotas="YES" # Check quotas on startup (or NO). 398accounting_enable="NO" # Turn on process accounting (or NO). 399ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 400ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 401sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 402linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 403svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 404osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 405clear_tmp_enable="NO" # Clear /tmp at startup. 406ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 407ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 408 # shared library search paths 409ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 410 # a.out shared library search paths 411kern_securelevel_enable="NO" # kernel security level (see init(8)), 412kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 413lomac_enable="NO" # start lomac(4) security module at boot 414update_motd="YES" # update version info in /etc/motd (or NO) 415start_vinum="NO" # set to YES to start vinum 416unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 417entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 418 # /var/db/entropy is preferred if / is not available. 419entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 420entropy_save_sz="2048" # Size of the entropy cache files. 421entropy_save_num="8" # Number of entropy cache files to save. 422harvest_interrupt="YES" # Entropy device harvests interrupt randomness 423harvest_ethernet="YES" # Entropy device harvests ethernet randomness 424harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 425dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 426 427############################################################## 428### Define source_rc_confs, the mechanism used by /etc/rc.* ## 429### scripts to source rc_conf_files overrides safely. ## 430############################################################## 431 432if [ -z "${source_rc_confs_defined}" ]; then 433 source_rc_confs_defined=yes 434 source_rc_confs () { 435 local i sourced_files 436 for i in ${rc_conf_files}; do 437 case ${sourced_files} in 438 *:$i:*) 439 ;; 440 *) 441 sourced_files="${sourced_files}:$i:" 442 if [ -r $i ]; then 443 . $i 444 fi 445 ;; 446 esac 447 done 448 } 449fi 450