xref: /freebsd-10.2-release/contrib/gcc/ChangeLog.gcc43

2007-08-08  Andrew Haley  <aph@redhat.com> (r128087)

	* config/arm/libunwind.S (UNWIND_WRAPPER _Unwind_Backtrace): New.
	* config/arm/unwind-arm.h (__gnu_Unwind_Backtrace): New.
	* config/arm/unwind-arm.c (__gnu_Unwind_Backtrace): New.

2007-06-05  Joerg Wunsch  <j.gnu@uriah.heep.sax.de> (r125346)

	PR preprocessor/23479
	* doc/extend.texi: Document the 0b-prefixed binary integer
	constant extension.
	
2007-05-31  Eric Christopher  <echristo@apple.com> (r125246)

	* expr.c (convert_move): Assert that we don't have a BLKmode
	operand.
	(store_expr): Handle BLKmode moves by calling emit_block_move.

2007-05-27  Eric Christopher  <echristo@apple.com> (r125116)

	* config/rs6000/rs6000.c (rs6000_emit_prologue): Update
	sp_offset depending on stack size. Save r12 depending
	on registers we're saving later.
	(rs6000_emit_epilogue): Update sp_offset depending only
	on stack size.

2007-05-24  Richard Sandiford  <rsandifo@nildram.co.uk> (r125037)

	* postreload-gcse.c (reg_changed_after_insn_p): New function.
	(oprs_unchanged_p): Use it to check all registers in a REG.
	(record_opr_changes): Look for clobbers in CALL_INSN_FUNCTION_USAGE.
	(reg_set_between_after_reload_p): Delete.
	(reg_used_between_after_reload_p): Likewise.
	(reg_set_or_used_since_bb_start): Likewise.
	(eliminate_partially_redundant_load): Use reg_changed_after_insn_p
	and reg_used_between_p instead of reg_set_or_used_since_bb_start.
	Use reg_set_between_p instead of reg_set_between_after_reload_p.
	* rtlanal.c (reg_set_p): Check whether REG overlaps
	regs_invalidated_by_call, rather than just checking the
	membership of REGNO (REG).

2007-05-16  Eric Christopher  <echristo@apple.com> (r124763)

       * config/rs6000/rs6000.c (rs6000_emit_prologue): Move altivec register
        saving after stack push. Set sp_offset whenever we push.
        (rs6000_emit_epilogue): Move altivec register restore before stack push.

2007-05-03  Ian Lance Taylor  <iant@google.com> (r124381)

	* config/rs6000/rs6000.c (rs6000_override_options): Don't set
	MASK_PPC_GFXOPT for 8540 or 8548.

2007-05-01  Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> (r124341)

	* doc/invoke.texi: Fix typo, 'AMD Family 10h core' instead of 
	'AMD Family 10 core'.

2007-05-01  Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> (r124339)
 
	* config/i386/i386.c (override_options): Accept k8-sse3, opteron-sse3 
	and athlon64-sse3 as improved versions of k8, opteron and athlon64 
	with SSE3 instruction set support.
	* doc/invoke.texi: Likewise.

2007-05-01  Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> (r124330)

	* config/i386/i386.c (override_options): Tuning 32-byte loop
	alignment for amdfam10 architecture. Increasing the max loop
	alignment to 24 bytes.

2007-04-16  Lawrence Crowl  <crowl@google.com>

	* doc/invoke.texi (Debugging Options): Add documentation for the
	-femit-struct-debug options -femit-struct-debug-baseonly,
	-femit-struct-debug-reduced, and
	-femit-struct-debug-detailed[=...].

	* c-opts.c (c_common_handle_option): Add
	OPT_femit_struct_debug_baseonly, OPT_femit_struct_debug_reduced,
	and OPT_femit_struct_debug_detailed_.
	* c.opt: Add specifications for
	-femit-struct-debug-baseonly, -femit-struct-debug-reduced,
	and -femit-struct-debug-detailed[=...].
	* opts.c (set_struct_debug_option): Parse the
	-femit-struct-debug-... options.
	* opts.c (matches_main_base, main_input_basename,
	main_input_baselength, base_of_path, matches_main_base): Add
	variables and functions to compare header base name to compilation
	unit base name.
	* opts.c (should_emit_struct_debug): Add to determine to emit a
	structure based on the option.
	(dump_struct_debug) Also disabled function to debug this
	function.
	* opts.c (handle_options): Save the base name of the
	compilation unit.

	* langhooks-def.h (LANG_HOOKS_GENERIC_TYPE_P): Define.
        (LANG_HOOKS_FOR_TYPES_INITIALIZER): Add.
	This hook indicates if a type is generic.  Set it by default
	to "never generic".
	* langhooks.h (struct lang_hooks_for_types): Add a new hook
	to determine if a struct type is generic or not.
	* cp/cp-tree.h (class_tmpl_impl_spec_p): Declare a C++ hook.
	* cp/tree.c (class_tmpl_impl_spec_p): Implement the C++ hook.
	* cp/cp-lang.c (LANG_HOOKS_GENERIC_TYPE_P): Override null C hook
	with live C++ hook.

	* flags.h (enum debug_info_usage): Add an enumeration to describe
	a program's use of a structure type.
	* dwarf2out.c (gen_struct_or_union_type_die): Add a new parameter
	to indicate the program's usage of the type.  Filter structs based
	on the -femit-struct-debug-... specification.
	(gen_type_die): Split into two routines, gen_type_die and
	gen_type_die_with_usage.  gen_type_die is now a wrapper
	that assumes direct usage.
	(gen_type_die_with_usage): Replace calls to gen_type_die
	with gen_type_die_with_usage adding the program usage of
	the referenced type.
	(dwarf2out_imported_module_or_decl): Suppress struct debug
	information using should_emit_struct_debug when appropriate.

2007-04-16  Ian Lance Taylor  <iant@google.com> (r123906)

	* tree-ssa-propagate.c (cfg_blocks_add): Insert blocks with fewer
	predecessors at head rather than tail.


2007-04-12  Richard Guenther  <rguenther@suse.de> (r123736)

	PR tree-optimization/24689
	PR tree-optimization/31307
	* fold-const.c (operand_equal_p): Compare INTEGER_CST array
	indices by value.
	* gimplify.c (canonicalize_addr_expr): To be consistent with
	gimplify_compound_lval only set operands two and three of
	ARRAY_REFs if they are not gimple_min_invariant.  This makes
	it never at this place.
	* tree-ssa-ccp.c (maybe_fold_offset_to_array_ref): Likewise.

2007-04-07  H.J. Lu  <hongjiu.lu@intel.com> (r123639)

	* config/i386/i386.c (ix86_handle_option): Handle SSSE3.

2007-03-28  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com> (r123313)

	* config.gcc: Accept barcelona as a variant of amdfam10.
	* config/i386/i386.c (override_options): Likewise.
	* doc/invoke.texi: Likewise.

2007-03-12  Seongbae Park <seongbae.park@gmail.com>

	* c-decl.c (warn_variable_length_array): New function.
	Refactored from grokdeclarator to handle warn_vla
	and handle unnamed array case.
	(grokdeclarator): Refactored VLA warning case.
	* c.opt (Wvla): New flag.

2007-03-11  Ian Lance Taylor  <iant@google.com> (r122831 - partial)

	* tree-vrp.c (vrp_int_const_binop): Handle PLUS_EXPR and
	the *_DIV_EXPR codes correctly with overflow infinities.

2007-02-09  Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> (r121763)

	* config/i386/driver-i386.c: Turn on -mtune=native for AMDFAM10.
	(bit_SSE4a): New.

2007-02-08  Harsha Jagasia  <harsha.jagasia@amd.com> (r121726)

	* config/i386/xmmintrin.h: Make inclusion of emmintrin.h
	conditional to __SSE2__.
	(Entries below should have been added to first ChangeLog
	entry for amdfam10 dated 2007-02-05)
	* config/i386/emmintrin.h: Generate #error if __SSE2__ is not
	defined.
	* config/i386/pmmintrin.h: Generate #error if __SSE3__ is not
	defined.
	* config/i386/tmmintrin.h: Generate #error if __SSSE3__ is not
	defined.

2007-02-07  Jakub Jelinek  <jakub@redhat.com> (r121687)

	* config/i386/i386.c (override_options): Set PTA_SSSE3 for core2.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/athlon.md (athlon_fldxf_k8, athlon_fld_k8,
	athlon_fstxf_k8, athlon_fst_k8, athlon_fist, athlon_fmov,
	athlon_fadd_load, athlon_fadd_load_k8, athlon_fadd, athlon_fmul,
	athlon_fmul_load, athlon_fmul_load_k8, athlon_fsgn,
	athlon_fdiv_load, athlon_fdiv_load_k8, athlon_fdiv_k8,
	athlon_fpspc_load, athlon_fpspc, athlon_fcmov_load,
	athlon_fcmov_load_k8, athlon_fcmov_k8, athlon_fcomi_load_k8,
	athlon_fcomi, athlon_fcom_load_k8, athlon_fcom): Added amdfam10.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/i386.md (x86_sahf_1, cmpfp_i_mixed, cmpfp_i_sse,
	cmpfp_i_i387, cmpfp_iu_mixed, cmpfp_iu_sse, cmpfp_iu_387,
	swapsi, swaphi_1, swapqi_1, swapdi_rex64, fix_truncsfdi_sse,
	fix_truncdfdi_sse, fix_truncsfsi_sse, fix_truncdfsi_sse,
	x86_fldcw_1, floatsisf2_mixed, floatsisf2_sse, floatdisf2_mixed,
	floatdisf2_sse, floatsidf2_mixed, floatsidf2_sse,
	floatdidf2_mixed, floatdidf2_sse, muldi3_1_rex64, mulsi3_1,
	mulsi3_1_zext, mulhi3_1, mulqi3_1, umulqihi3_1, mulqihi3_insn,
	umulditi3_insn, umulsidi3_insn, mulditi3_insn, mulsidi3_insn,
	umuldi3_highpart_rex64, umulsi3_highpart_insn,
	umulsi3_highpart_zext, smuldi3_highpart_rex64,
	smulsi3_highpart_insn, smulsi3_highpart_zext, x86_64_shld,
	x86_shld_1, x86_64_shrd, sqrtsf2_mixed, sqrtsf2_sse,
	sqrtsf2_i387, sqrtdf2_mixed, sqrtdf2_sse, sqrtdf2_i387,
	sqrtextendsfdf2_i387, sqrtxf2, sqrtextendsfxf2_i387,
	sqrtextenddfxf2_i387): Added amdfam10_decode.
	
	* config/i386/athlon.md (athlon_idirect_amdfam10,
	athlon_ivector_amdfam10, athlon_idirect_load_amdfam10,
	athlon_ivector_load_amdfam10, athlon_idirect_both_amdfam10,
	athlon_ivector_both_amdfam10, athlon_idirect_store_amdfam10,
	athlon_ivector_store_amdfam10): New define_insn_reservation.
	(athlon_idirect_loadmov, athlon_idirect_movstore): Added
	amdfam10.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/athlon.md (athlon_call_amdfam10,
	athlon_pop_amdfam10, athlon_lea_amdfam10): New
	define_insn_reservation.
	(athlon_branch, athlon_push, athlon_leave_k8, athlon_imul_k8,
	athlon_imul_k8_DI, athlon_imul_mem_k8, athlon_imul_mem_k8_DI,
	athlon_idiv, athlon_idiv_mem, athlon_str): Added amdfam10.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/athlon.md (athlon_sseld_amdfam10,
	athlon_mmxld_amdfam10, athlon_ssest_amdfam10,
	athlon_mmxssest_short_amdfam10): New define_insn_reservation.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/athlon.md (athlon_sseins_amdfam10): New
	define_insn_reservation.
	* config/i386/i386.md (sseins): Added sseins to define_attr type
	and define_attr unit.
	* config/i386/sse.md: Set type attribute to sseins for insertq
	and insertqi.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/athlon.md (sselog_load_amdfam10, sselog_amdfam10,
	ssecmpvector_load_amdfam10, ssecmpvector_amdfam10,
	ssecomi_load_amdfam10, ssecomi_amdfam10,
	sseaddvector_load_amdfam10, sseaddvector_amdfam10): New
	define_insn_reservation.
	(ssecmp_load_k8, ssecmp, sseadd_load_k8, seadd): Added amdfam10.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/athlon.md (cvtss2sd_load_amdfam10,
	cvtss2sd_amdfam10, cvtps2pd_load_amdfam10, cvtps2pd_amdfam10,
	cvtsi2sd_load_amdfam10, cvtsi2ss_load_amdfam10,
	cvtsi2sd_amdfam10, cvtsi2ss_amdfam10, cvtsd2ss_load_amdfam10,
	cvtsd2ss_amdfam10, cvtpd2ps_load_amdfam10, cvtpd2ps_amdfam10,
	cvtsX2si_load_amdfam10, cvtsX2si_amdfam10): New 
	define_insn_reservation.

	* config/i386/sse.md (cvtsi2ss, cvtsi2ssq, cvtss2si,
	cvtss2siq, cvttss2si, cvttss2siq, cvtsi2sd, cvtsi2sdq,
	cvtsd2si, cvtsd2siq, cvttsd2si, cvttsd2siq,
	cvtpd2dq, cvttpd2dq, cvtsd2ss, cvtss2sd,
	cvtpd2ps, cvtps2pd): Added amdfam10_decode attribute.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/athlon.md (athlon_ssedivvector_amdfam10,
	athlon_ssedivvector_load_amdfam10, athlon_ssemulvector_amdfam10,
	athlon_ssemulvector_load_amdfam10): New define_insn_reservation.
	(athlon_ssediv, athlon_ssediv_load_k8, athlon_ssemul,
	athlon_ssemul_load_k8): Added amdfam10.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/i386.h (TARGET_SSE_UNALIGNED_MOVE_OPTIMAL): New macro.
	(x86_sse_unaligned_move_optimal): New variable.
	
	* config/i386/i386.c (x86_sse_unaligned_move_optimal): Enable for  
	m_AMDFAM10.
	(ix86_expand_vector_move_misalign): Add code to generate movupd/movups
	for unaligned vector SSE double/single precision loads for AMDFAM10.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)

	* config/i386/i386.h (TARGET_AMDFAM10): New macro.
	(TARGET_CPU_CPP_BUILTINS): Add code for amdfam10.
	Define TARGET_CPU_DEFAULT_amdfam10.
	(TARGET_CPU_DEFAULT_NAMES): Add amdfam10.
	(processor_type): Add PROCESSOR_AMDFAM10.	
	
	* config/i386/i386.md: Add amdfam10 as a new cpu attribute to match
	processor_type in config/i386/i386.h.
	Enable imul peepholes for TARGET_AMDFAM10.
	
	* config.gcc: Add support for --with-cpu option for amdfam10.
	
	* config/i386/i386.c (amdfam10_cost): New variable.
	(m_AMDFAM10): New macro.
	(m_ATHLON_K8_AMDFAM10): New macro.
	(x86_use_leave, x86_push_memory, x86_movx, x86_unroll_strlen,
	x86_cmove, x86_3dnow_a, x86_deep_branch, x86_use_simode_fiop,
	x86_promote_QImode, x86_integer_DFmode_moves,
	x86_partial_reg_dependency, x86_memory_mismatch_stall, 
	x86_accumulate_outgoing_args, x86_arch_always_fancy_math_387,
	x86_sse_partial_reg_dependency, x86_sse_typeless_stores,
	x86_use_ffreep, x86_use_incdec, x86_four_jump_limit,
	x86_schedule, x86_use_bt, x86_cmpxchg16b, x86_pad_returns):
	Enable/disable for amdfam10.
	(override_options): Add amdfam10_cost to processor_target_table.
	Set up PROCESSOR_AMDFAM10 for amdfam10 entry in 
	processor_alias_table.
	(ix86_issue_rate): Add PROCESSOR_AMDFAM10.
	(ix86_adjust_cost): Add code for amdfam10.

2007-02-05  Harsha Jagasia  <harsha.jagasia@amd.com> (r121625)
	
	* config/i386/i386.opt: Add new Advanced Bit Manipulation (-mabm)
	instruction set feature flag. Add new (-mpopcnt) flag for popcnt 
	instruction. Add new SSE4A (-msse4a) instruction set feature flag.
	* config/i386/i386.h: Add builtin definition for SSE4A.
	* config/i386/i386.md: Add support for ABM instructions 
	(popcnt and lzcnt).
	* config/i386/sse.md: Add support for SSE4A instructions
	(movntss, movntsd, extrq, insertq).
	* config/i386/i386.c: Add support for ABM and SSE4A builtins.
	Add -march=amdfam10 flag.
	* config/i386/ammintrin.h: Add support for SSE4A intrinsics.
	* doc/invoke.texi: Add documentation on flags for sse4a, abm, popcnt
	and amdfam10.
	* doc/extend.texi: Add documentation for SSE4A builtins.

2007-01-24  Jakub Jelinek  <jakub@redhat.com> (r121140)

	* config/i386/i386.h (x86_cmpxchg16b): Remove const.
	(TARGET_CMPXCHG16B): Define to x86_cmpxchg16b.
	* config/i386/i386.c (x86_cmpxchg16b): Remove const.
	(override_options): Add PTA_CX16 flag.  Set x86_cmpxchg16b
	for CPUs that have PTA_CX16 set.

2007-01-17  Eric Christopher  <echristo@apple.com> (r120846)

	* config.gcc: Support core2 processor.

2006-12-13  Ian Lance Taylor  <iant@google.com> (r119855)

	PR c++/19564
	PR c++/19756
	* c-typeck.c (parser_build_binary_op): Move parentheses warnings
	to warn_about_parentheses in c-common.c.
	* c-common.c (warn_about_parentheses): New function.
	* c-common.h (warn_about_parentheses): Declare.
	* doc/invoke.texi (Warning Options): Update -Wparentheses
	description.

2006-12-12  Geoffrey Keating  <geoffk@apple.com> (r119820)
 
	* mips-tdump.c: Replace CROSS_COMPILE with
	CROSS_DIRECTORY_STRUCTURE.
	* mips-tfile.c: Likewise.
	* gcc.c: Likewise.
	* configure.ac: Likewise.
	* cppdefault.c: Likewise.
	* Makefile.in: Likewise.
	* config/alpha/osf.h: Likewise.
	* config/i386/cygwin.h: Likewise.
	* config/i386/beos-elf.h: Likewise.
	* config/i386/nto.h: Likewise.
	* config/svr4.h: Likewise.
	* config/rs6000/aix.h: Likewise.
	* config/rs6000/sysv4.h: Likewise.
	* collect2.c: Likewise.
	* configure: Regenerate.

 	* doc/tm.texi (Alignment Output): Document that ASM_OUTPUT_SKIP
 	actually takes an unsigned HOST_WIDE_INT for its second parameter.

2006-12-02  H.J. Lu  <hongjiu.lu@intel.com> (r119454 - partial)

	PR target/30040
	* config/i386/driver-i386.c (bit_SSSE3): New.

2006-11-27  Uros Bizjak  <ubizjak@gmail.com> (r119260)

	* config/i386/i386.c (x86_ext_80387_constants): Add m_K8, m_CORE2
	and m_GENERIC64.

2006-11-18  Vladimir Makarov  <vmakarov@redhat.com> (r118973)

	* doc/invoke.texi (core2): Add item.

	* config/i386/i386.h (TARGET_CORE2, TARGET_CPU_DEFAULT_core2): New
	macros.
	(TARGET_CPU_CPP_BUILTINS): Add code for core2.
	(TARGET_CPU_DEFAULT_generic): Change value.
	(TARGET_CPU_DEFAULT_NAMES): Add core2.
	(processor_type): Add new constant PROCESSOR_CORE2.

	* config/i386/i386.md (cpu): Add core2.

	* config/i386/i386.c (core2_cost): New initialized variable.
	(m_CORE2): New macro.
	(x86_use_leave, x86_push_memory, x86_movx, x86_unroll_strlen,
	x86_deep_branch, x86_partial_reg_stall, x86_use_simode_fiop,
	x86_use_cltd, x86_promote_QImode, x86_sub_esp_4, x86_sub_esp_8,
	x86_add_esp_4, x86_add_esp_8, x86_integer_DFmode_moves,
	x86_partial_reg_dependency, x86_memory_mismatch_stall,
	x86_accumulate_outgoing_args, x86_prologue_using_move,
	x86_epilogue_using_move, x86_arch_always_fancy_math_387,
	x86_sse_partial_reg_dependency, x86_rep_movl_optimal,
	x86_use_incdec, x86_four_jump_limit, x86_schedule,
	x86_pad_returns): Add m_CORE2.
	(override_options): Add entries for Core2.
	(ix86_issue_rate): Add case for Core2.
	
2006-11-07  Eric Christopher  <echristo@apple.com> (r118576)

	* libgcc2.c (__bswapdi2): Rename from bswapDI2.
	(__bswapsi2): Ditto.
	* libgcc2.h: Remove transformation of bswap routines.
	* config/i386/i386.md (bswapsi2): New.
	(bswapdi2): Ditto.

2006-10-31  Geoffrey Keating  <geoffk@apple.com> (r118360)
 
	* coverage.c (coverage_checksum_string): Update comment.
	* dwarf2out.c (switch_to_eh_frame_section): Update for removal
	of get_file_function_name.
	* cgraphunit.c (cgraph_build_static_cdtor): Update for rename
	of get_file_function_name_long.
	* tree.c (get_file_function_name): Rename from
	get_file_function_name_long; improve comment; handle 'I' and 'D'
	specially when the target has ctor/dtor support; remove special
	handling for 'F'.
	(get_file_function_name): Remove.
	* tree.h (get_file_function_name): Rename from
        get_file_function_name_long.
	(get_file_function_name): Remove prototype.

2006-10-31  Geoffrey Keating  <geoffk@apple.com> (r118356)

	* c-decl.c (grokdeclarator): Don't set DECL_EXTERNAL on
	inline static functions in c99 mode.

	PR 16622
	* doc/extend.texi (Inline): Update.
	* c-tree.h (struct language_function): Remove field 'extern_inline'.
	* c-decl.c (current_extern_inline): Delete.
	(pop_scope): Adjust test for an undefined nested function.
	Add warning about undeclared inline function.
	(diagnose_mismatched_decls): Update comments.  Disallow overriding
	of inline functions in a translation unit in C99.  Allow inline
	declarations in C99 at any time.
	(merge_decls): Boolize variables.  Handle C99 'extern inline'
	semantics.
	(grokdeclarator): Set DECL_EXTERNAL here for functions.  Handle
	C99 inline semantics.
	(start_function): Don't clear current_extern_inline.  Don't set
	DECL_EXTERNAL.
	(c_push_function_context): Don't push current_extern_inline.
	(c_pop_function_context): Don't restore current_extern_inline.

	PR 11377
	* c-typeck.c (build_external_ref): Warn about static variables
	used in extern inline functions.
	* c-decl.c (start_decl): Warn about static variables declared
	in extern inline functions.

2006-10-27  Vladimir Makarov  <vmakarov@redhat.com> (r118090)

	* config/i386/i386.h (TARGET_GEODE):
	(TARGET_CPU_CPP_BUILTINS): Add code for geode.
	(TARGET_CPU_DEFAULT_geode): New macro.
	(TARGET_CPU_DEFAULT_k6, TARGET_CPU_DEFAULT_k6_2,
	TARGET_CPU_DEFAULT_k6_3, TARGET_CPU_DEFAULT_athlon,
	TARGET_CPU_DEFAULT_athlon_sse, TARGET_CPU_DEFAULT_k8,
	TARGET_CPU_DEFAULT_pentium_m, TARGET_CPU_DEFAULT_prescott,
	TARGET_CPU_DEFAULT_nocona, TARGET_CPU_DEFAULT_generic): Increase
	the macro values.
	(TARGET_CPU_DEFAULT_NAMES): Add geode.
	(processor_type): Add PROCESSOR_GEODE.

	* config/i386/i386.md: Include geode.md.
	(cpu): Add geode.

	* config/i386/i386.c (geode_cost): New initialized global
	variable.
	(m_GEODE, m_K6_GEODE): New macros.
	(x86_use_leave, x86_push_memory, x86_deep_branch, x86_use_sahf,
	x86_use_himode_fiop, x86_promote_QImode, x86_add_esp_4,
	x86_add_esp_8, x86_rep_movl_optimal, x86_ext_80387_constants,
	x86_schedule): Use m_K6_GEODE instead of m_K6.
	(x86_movx, x86_cmove): Set up m_GEODE.
	(x86_integer_DFmode_moves): Clear m_GEODE.
	(processor_target_table): Add entry for geode.
	(processor_alias_table): Ditto.

	* config/i386/geode.md: New file.

	* doc/invoke.texi: Add entry about geode processor.
    
2006-10-24  Richard Guenther  <rguenther@suse.de> (r118001)

	PR middle-end/28796
	* builtins.c (fold_builtin_classify): Use HONOR_INFINITIES
	and HONOR_NANS instead of MODE_HAS_INFINITIES and MODE_HAS_NANS
	for deciding optimizations in consistency with fold-const.c
	(fold_builtin_unordered_cmp): Likewise.

2006-10-22  H.J. Lu  <hongjiu.lu@intel.com> (r117958)

	* config.gcc (i[34567]86-*-*): Add tmmintrin.h to extra_headers.
	(x86_64-*-*): Likewise.

	* config/i386/i386.c (pta_flags): Add PTA_SSSE3.
	(override_options): Check SSSE3.
	(ix86_builtins): Add IX86_BUILTIN_PHADDW, IX86_BUILTIN_PHADDD,
	IX86_BUILTIN_PHADDSW, IX86_BUILTIN_PHSUBW, IX86_BUILTIN_PHSUBD,
	IX86_BUILTIN_PHSUBSW, IX86_BUILTIN_PMADDUBSW,
	IX86_BUILTIN_PMULHRSW, IX86_BUILTIN_PSHUFB,
	IX86_BUILTIN_PSIGNB, IX86_BUILTIN_PSIGNW, IX86_BUILTIN_PSIGND,
	IX86_BUILTIN_PALIGNR, IX86_BUILTIN_PABSB, IX86_BUILTIN_PABSW,
	IX86_BUILTIN_PABSD, IX86_BUILTIN_PHADDW128,
	IX86_BUILTIN_PHADDD128, IX86_BUILTIN_PHADDSW128,
	IX86_BUILTIN_PHSUBW128, IX86_BUILTIN_PHSUBD128,
	IX86_BUILTIN_PHSUBSW128, IX86_BUILTIN_PMADDUBSW128,
	IX86_BUILTIN_PMULHRSW128, IX86_BUILTIN_PSHUFB128,
	IX86_BUILTIN_PSIGNB128, IX86_BUILTIN_PSIGNW128,
	IX86_BUILTIN_PSIGND128, IX86_BUILTIN_PALIGNR128,
	IX86_BUILTIN_PABSB128, IX86_BUILTIN_PABSW128 and
	IX86_BUILTIN_PABSD128.
	(bdesc_2arg): Add SSSE3.
	(bdesc_1arg): Likewise.
	(ix86_init_mmx_sse_builtins): Support SSSE3.
	(ix86_expand_builtin): Likewise.
	* config/i386/i386.h (TARGET_CPU_CPP_BUILTINS): Likewise.

	* config/i386/i386.md (UNSPEC_PSHUFB): New.
	(UNSPEC_PSIGN): Likewise.
	(UNSPEC_PALIGNR): Likewise.
	Include mmx.md before sse.md.

	* config/i386/i386.opt: Add -mssse3.

	* config/i386/sse.md (ssse3_phaddwv8hi3): New pattern for SSSE3.
	(ssse3_phaddwv4hi3): Likewise.
	(ssse3_phadddv4si3): Likewise.
	(ssse3_phadddv2si3): Likewise.
	(ssse3_phaddswv8hi3): Likewise.
	(ssse3_phaddswv4hi3): Likewise.
	(ssse3_phsubwv8hi3): Likewise.
	(ssse3_phsubwv4hi3): Likewise.
	(ssse3_phsubdv4si3): Likewise.
	(ssse3_phsubdv2si3): Likewise.
	(ssse3_phsubswv8hi3): Likewise.
	(ssse3_phsubswv4hi3): Likewise.
	(ssse3_pmaddubswv8hi3): Likewise.
	(ssse3_pmaddubswv4hi3): Likewise.
	(ssse3_pmulhrswv8hi3): Likewise.
	(ssse3_pmulhrswv4hi3): Likewise.
	(ssse3_pshufbv16qi3): Likewise.
	(ssse3_pshufbv8qi3): Likewise.
	(ssse3_psign<mode>3): Likewise.
	(ssse3_psign<mode>3): Likewise.
	(ssse3_palignrti): Likewise.
	(ssse3_palignrdi): Likewise.
	(abs<mode>2): Likewise.
	(abs<mode>2): Likewise.

	* config/i386/tmmintrin.h: New file.

	* doc/extend.texi: Document SSSE3 built-in functions.

	* doc/invoke.texi: Document -mssse3/-mno-ssse3 switches.

2006-10-22  H.J. Lu  <hongjiu.lu@intel.com> (r117959)
  	 
	* config/i386/tmmintrin.h: Remove the duplicated content.

2006-10-21  Richard Guenther  <rguenther@suse.de> (r117932)

	PR tree-optimization/3511
	* tree-ssa-pre.c (phi_translate): Fold CALL_EXPRs that
	got new invariant arguments during PHI translation.

2006-10-21  Richard Guenther  <rguenther@suse.de> (r117929)

	* builtins.c (fold_builtin_classify): Fix typo.

2006-09-07  Eric Christopher  <echristo@apple.com> (r118361)
	    Falk Hueffner  <falk@debian.org>

	* doc/extend.texi (__builtin_bswap32): Document.
	(__builtin_bswap64): Ditto.
	* doc/libgcc.texi (bswapsi2): Document.
	(bswapdi2): Ditto.
	* doc/rtl.texi (bswap): Document.
	* optabs.c (expand_unop): Don't widen a bswap.
	(init_optabs): Init bswap. Set libfuncs explicitly
	for bswapsi2 and bswapdi2.
	* optabs.h (OTI_bswap): New.
	(bswap_optab): Ditto.
	* genopinit.c (optabs): Handle bswap_optab.
	* tree.h (tree_index): Add TI_UINT32_TYPE and
	TI_UINT64_TYPE.
	(uint32_type_node): New.
	(uint64_type_node): Ditto.
	* tree.c (build_common_tree_nodes_2): Initialize
	uint32_type_node and uint64_type_node.
	* builtins.c (expand_builtin_bswap): New.
	(expand_builtin): Call.
	(fold_builtin_bswap): New.
	(fold_builtin_1): Call.
	* fold-const.c (tree_expr_nonnegative_p): Return true
	for bswap.
	* builtin-types.def (BT_UINT32): New.
	(BT_UINT64): Ditto.
	(BT_FN_UINT32_UINT32): Ditto.
	(BT_FN_UINT64_UINT64): Ditto.
	* builtins.def (BUILT_IN_BSWAP32): New.
	(BUILT_IN_BSWAP64): Ditto.
	* rtl.def (BSWAP): New.
	* genattrtab.c (check_attr_value): New.
	* libgcc2.c (__bswapSI2): New.
	(__bswapDI2): Ditto.
	* libgcc2.h (__bswapSI2): Declare.
	(__bswapDI2): Ditto.
	* mklibgcc.in (lib2funcs): Add _bswapsi2 and _bswapdi2.
	* simplify-rtx.c (simplify_const_unary_operation): Return
	0 for BSWAP.
	* libgcc-std.ver (__bwapsi2): Add.
	(__bswapdi2): Ditto.
	* reload1.c (eliminate_regs_1): Add bswap.
	(elimination_effects): Ditto.
	* config/i386/i386.h (x86_bswap): New.
	(TARGET_BSWAP): Use.
	* config/i386/i386.c (x86_bswap): Set.