ata.h revision 144330
1/*- 2 * Copyright (c) 2000 - 2005 S�ren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * $FreeBSD: head/sys/sys/ata.h 144330 2005-03-30 12:03:40Z sos $ 29 */ 30 31#ifndef _SYS_ATA_H_ 32#define _SYS_ATA_H_ 33 34#include <sys/ioccom.h> 35 36/* ATA/ATAPI device parameters */ 37struct ata_params { 38/*000*/ u_int16_t config; /* configuration info */ 39#define ATA_PROTO_MASK 0x8003 40#define ATA_PROTO_ATA 0x0000 41#define ATA_PROTO_ATAPI_12 0x8000 42#define ATA_PROTO_ATAPI_16 0x8001 43#define ATA_ATAPI_TYPE_MASK 0x1f00 44#define ATA_ATAPI_TYPE_DIRECT 0x0000 /* disk/floppy */ 45#define ATA_ATAPI_TYPE_TAPE 0x0100 /* streaming tape */ 46#define ATA_ATAPI_TYPE_CDROM 0x0500 /* CD-ROM device */ 47#define ATA_ATAPI_TYPE_OPTICAL 0x0700 /* optical disk */ 48#define ATA_DRQ_MASK 0x0060 49#define ATA_DRQ_SLOW 0x0000 /* cpu 3 ms delay */ 50#define ATA_DRQ_INTR 0x0020 /* interrupt 10 ms delay */ 51#define ATA_DRQ_FAST 0x0040 /* accel 50 us delay */ 52 53/*001*/ u_int16_t cylinders; /* # of cylinders */ 54 u_int16_t reserved2; 55/*003*/ u_int16_t heads; /* # heads */ 56 u_int16_t obsolete4; 57 u_int16_t obsolete5; 58/*006*/ u_int16_t sectors; /* # sectors/track */ 59/*007*/ u_int16_t vendor7[3]; 60/*010*/ u_int8_t serial[20]; /* serial number */ 61/*020*/ u_int16_t retired20; 62 u_int16_t retired21; 63 u_int16_t obsolete22; 64/*023*/ u_int8_t revision[8]; /* firmware revision */ 65/*027*/ u_int8_t model[40]; /* model name */ 66/*047*/ u_int16_t sectors_intr; /* sectors per interrupt */ 67/*048*/ u_int16_t usedmovsd; /* double word read/write? */ 68/*049*/ u_int16_t capabilities1; 69#define ATA_SUPPORT_DMA 0x0100 70#define ATA_SUPPORT_LBA 0x0200 71#define ATA_SUPPORT_OVERLAP 0x4000 72 73/*050*/ u_int16_t capabilities2; 74/*051*/ u_int16_t retired_piomode; /* PIO modes 0-2 */ 75#define ATA_RETIRED_PIO_MASK 0x0300 76 77/*052*/ u_int16_t retired_dmamode; /* DMA modes */ 78#define ATA_RETIRED_DMA_MASK 0x0003 79 80/*053*/ u_int16_t atavalid; /* fields valid */ 81#define ATA_FLAG_54_58 0x0001 /* words 54-58 valid */ 82#define ATA_FLAG_64_70 0x0002 /* words 64-70 valid */ 83#define ATA_FLAG_88 0x0004 /* word 88 valid */ 84 85/*054*/ u_int16_t current_cylinders; 86/*055*/ u_int16_t current_heads; 87/*056*/ u_int16_t current_sectors; 88/*057*/ u_int16_t current_size_1; 89/*058*/ u_int16_t current_size_2; 90/*059*/ u_int16_t multi; 91#define ATA_MULTI_VALID 0x0100 92 93/*060*/ u_int16_t lba_size_1; 94 u_int16_t lba_size_2; 95 u_int16_t obsolete62; 96/*063*/ u_int16_t mwdmamodes; /* multiword DMA modes */ 97/*064*/ u_int16_t apiomodes; /* advanced PIO modes */ 98 99/*065*/ u_int16_t mwdmamin; /* min. M/W DMA time/word ns */ 100/*066*/ u_int16_t mwdmarec; /* rec. M/W DMA time ns */ 101/*067*/ u_int16_t pioblind; /* min. PIO cycle w/o flow */ 102/*068*/ u_int16_t pioiordy; /* min. PIO cycle IORDY flow */ 103 u_int16_t reserved69; 104 u_int16_t reserved70; 105/*071*/ u_int16_t rlsovlap; /* rel time (us) for overlap */ 106/*072*/ u_int16_t rlsservice; /* rel time (us) for service */ 107 u_int16_t reserved73; 108 u_int16_t reserved74; 109/*075*/ u_int16_t queue; 110#define ATA_QUEUE_LEN(x) ((x) & 0x001f) 111 112 u_int16_t satacapabilities; 113#define ATA_SATA_GEN1 0x0002 114#define ATA_SATA_GEN2 0x0004 115#define ATA_SUPPORT_NCQ 0x0100 116#define ATA_SUPPORT_IFPWRMNGTRCV 0x0200 117 118 u_int16_t reserved77; 119 u_int16_t satasupport; 120#define ATA_SUPPORT_NONZERO 0x0002 121#define ATA_SUPPORT_AUTOACTIVATE 0x0004 122#define ATA_SUPPORT_IFPWRMNGT 0x0008 123#define ATA_SUPPORT_INORDERDATA 0x0010 124 u_int16_t sataenabled; 125 126/*080*/ u_int16_t version_major; 127/*081*/ u_int16_t version_minor; 128 129 struct { 130/*082/085*/ u_int16_t command1; 131#define ATA_SUPPORT_SMART 0x0001 132#define ATA_SUPPORT_SECURITY 0x0002 133#define ATA_SUPPORT_REMOVABLE 0x0004 134#define ATA_SUPPORT_POWERMGT 0x0008 135#define ATA_SUPPORT_PACKET 0x0010 136#define ATA_SUPPORT_WRITECACHE 0x0020 137#define ATA_SUPPORT_LOOKAHEAD 0x0040 138#define ATA_SUPPORT_RELEASEIRQ 0x0080 139#define ATA_SUPPORT_SERVICEIRQ 0x0100 140#define ATA_SUPPORT_RESET 0x0200 141#define ATA_SUPPORT_PROTECTED 0x0400 142#define ATA_SUPPORT_WRITEBUFFER 0x1000 143#define ATA_SUPPORT_READBUFFER 0x2000 144#define ATA_SUPPORT_NOP 0x4000 145 146/*083/086*/ u_int16_t command2; 147#define ATA_SUPPORT_MICROCODE 0x0001 148#define ATA_SUPPORT_QUEUED 0x0002 149#define ATA_SUPPORT_CFA 0x0004 150#define ATA_SUPPORT_APM 0x0008 151#define ATA_SUPPORT_NOTIFY 0x0010 152#define ATA_SUPPORT_STANDBY 0x0020 153#define ATA_SUPPORT_SPINUP 0x0040 154#define ATA_SUPPORT_MAXSECURITY 0x0100 155#define ATA_SUPPORT_AUTOACOUSTIC 0x0200 156#define ATA_SUPPORT_ADDRESS48 0x0400 157#define ATA_SUPPORT_OVERLAY 0x0800 158#define ATA_SUPPORT_FLUSHCACHE 0x1000 159#define ATA_SUPPORT_FLUSHCACHE48 0x2000 160 161/*084/087*/ u_int16_t extension; 162 } __packed support, enabled; 163 164/*088*/ u_int16_t udmamodes; /* UltraDMA modes */ 165/*089*/ u_int16_t erase_time; 166/*090*/ u_int16_t enhanced_erase_time; 167/*091*/ u_int16_t apm_value; 168/*092*/ u_int16_t master_passwd_revision; 169/*093*/ u_int16_t hwres; 170#define ATA_CABLE_ID 0x2000 171 172/*094*/ u_int16_t acoustic; 173#define ATA_ACOUSTIC_CURRENT(x) ((x) & 0x00ff) 174#define ATA_ACOUSTIC_VENDOR(x) (((x) & 0xff00) >> 8) 175 176/*095*/ u_int16_t stream_min_req_size; 177/*096*/ u_int16_t stream_transfer_time; 178/*097*/ u_int16_t stream_access_latency; 179/*098*/ u_int32_t stream_granularity; 180/*100*/ u_int16_t lba_size48_1; 181 u_int16_t lba_size48_2; 182 u_int16_t lba_size48_3; 183 u_int16_t lba_size48_4; 184 u_int16_t reserved104[23]; 185/*127*/ u_int16_t removable_status; 186/*128*/ u_int16_t security_status; 187 u_int16_t reserved129[31]; 188/*160*/ u_int16_t cfa_powermode1; 189 u_int16_t reserved161[15]; 190/*176*/ u_int16_t media_serial[30]; 191 u_int16_t reserved206[49]; 192/*255*/ u_int16_t integrity; 193} __packed; 194 195/* ATA transfer modes */ 196#define ATA_MODE_MASK 0x0f 197#define ATA_DMA_MASK 0xf0 198#define ATA_PIO 0x00 199#define ATA_PIO0 0x08 200#define ATA_PIO1 0x09 201#define ATA_PIO2 0x0a 202#define ATA_PIO3 0x0b 203#define ATA_PIO4 0x0c 204#define ATA_PIO_MAX 0x0f 205#define ATA_DMA 0x10 206#define ATA_WDMA0 0x20 207#define ATA_WDMA1 0x21 208#define ATA_WDMA2 0x22 209#define ATA_UDMA0 0x40 210#define ATA_UDMA1 0x41 211#define ATA_UDMA2 0x42 212#define ATA_UDMA3 0x43 213#define ATA_UDMA4 0x44 214#define ATA_UDMA5 0x45 215#define ATA_UDMA6 0x46 216#define ATA_SA150 0x47 217#define ATA_DMA_MAX 0x4f 218 219/* ATA commands */ 220#define ATA_NOP 0x00 /* NOP command */ 221#define ATA_NF_FLUSHQUEUE 0x00 /* flush queued cmd's */ 222#define ATA_NF_AUTOPOLL 0x01 /* start autopoll function */ 223#define ATA_ATAPI_RESET 0x08 /* reset ATAPI device */ 224#define ATA_READ 0x20 /* read command */ 225#define ATA_READ48 0x24 /* read command */ 226#define ATA_READ_DMA48 0x25 /* read w/DMA command */ 227#define ATA_READ_DMA_QUEUED48 0x26 /* read w/DMA QUEUED command */ 228#define ATA_READ_MUL48 0x29 /* read multi command */ 229#define ATA_WRITE 0x30 /* write command */ 230#define ATA_WRITE48 0x34 /* write command */ 231#define ATA_WRITE_DMA48 0x35 /* write w/DMA command */ 232#define ATA_WRITE_DMA_QUEUED48 0x36 /* write w/DMA QUEUED command */ 233#define ATA_WRITE_MUL48 0x39 /* write multi command */ 234#define ATA_PACKET_CMD 0xa0 /* packet command */ 235#define ATA_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ 236#define ATA_SERVICE 0xa2 /* service command */ 237#define ATA_READ_MUL 0xc4 /* read multi command */ 238#define ATA_WRITE_MUL 0xc5 /* write multi command */ 239#define ATA_SET_MULTI 0xc6 /* set multi size command */ 240#define ATA_READ_DMA_QUEUED 0xc7 /* read w/DMA QUEUED command */ 241#define ATA_READ_DMA 0xc8 /* read w/DMA command */ 242#define ATA_WRITE_DMA 0xca /* write w/DMA command */ 243#define ATA_WRITE_DMA_QUEUED 0xcc /* write w/DMA QUEUED command */ 244#define ATA_SLEEP 0xe6 /* sleep command */ 245#define ATA_FLUSHCACHE 0xe7 /* flush cache to disk */ 246#define ATA_FLUSHCACHE48 0xea /* flush cache to disk */ 247#define ATA_ATA_IDENTIFY 0xec /* get ATA params */ 248#define ATA_SETFEATURES 0xef /* features command */ 249#define ATA_SF_SETXFER 0x03 /* set transfer mode */ 250#define ATA_SF_ENAB_WCACHE 0x02 /* enable write cache */ 251#define ATA_SF_DIS_WCACHE 0x82 /* disable write cache */ 252#define ATA_SF_ENAB_RCACHE 0xaa /* enable readahead cache */ 253#define ATA_SF_DIS_RCACHE 0x55 /* disable readahead cache */ 254#define ATA_SF_ENAB_RELIRQ 0x5d /* enable release interrupt */ 255#define ATA_SF_DIS_RELIRQ 0xdd /* disable release interrupt */ 256#define ATA_SF_ENAB_SRVIRQ 0x5e /* enable service interrupt */ 257#define ATA_SF_DIS_SRVIRQ 0xde /* disable service interrupt */ 258 259/* ATAPI commands */ 260#define ATAPI_TEST_UNIT_READY 0x00 /* check if device is ready */ 261#define ATAPI_REZERO 0x01 /* rewind */ 262#define ATAPI_REQUEST_SENSE 0x03 /* get sense data */ 263#define ATAPI_FORMAT 0x04 /* format unit */ 264#define ATAPI_READ 0x08 /* read data */ 265#define ATAPI_WRITE 0x0a /* write data */ 266#define ATAPI_WEOF 0x10 /* write filemark */ 267#define ATAPI_WF_WRITE 0x01 268#define ATAPI_SPACE 0x11 /* space command */ 269#define ATAPI_SP_FM 0x01 270#define ATAPI_SP_EOD 0x03 271#define ATAPI_MODE_SELECT 0x15 /* mode select */ 272#define ATAPI_ERASE 0x19 /* erase */ 273#define ATAPI_MODE_SENSE 0x1a /* mode sense */ 274#define ATAPI_START_STOP 0x1b /* start/stop unit */ 275#define ATAPI_SS_LOAD 0x01 276#define ATAPI_SS_RETENSION 0x02 277#define ATAPI_SS_EJECT 0x04 278#define ATAPI_PREVENT_ALLOW 0x1e /* media removal */ 279#define ATAPI_READ_FORMAT_CAPACITIES 0x23 /* get format capacities */ 280#define ATAPI_READ_CAPACITY 0x25 /* get volume capacity */ 281#define ATAPI_READ_BIG 0x28 /* read data */ 282#define ATAPI_WRITE_BIG 0x2a /* write data */ 283#define ATAPI_LOCATE 0x2b /* locate to position */ 284#define ATAPI_READ_POSITION 0x34 /* read position */ 285#define ATAPI_SYNCHRONIZE_CACHE 0x35 /* flush buf, close channel */ 286#define ATAPI_WRITE_BUFFER 0x3b /* write device buffer */ 287#define ATAPI_READ_BUFFER 0x3c /* read device buffer */ 288#define ATAPI_READ_SUBCHANNEL 0x42 /* get subchannel info */ 289#define ATAPI_READ_TOC 0x43 /* get table of contents */ 290#define ATAPI_PLAY_10 0x45 /* play by lba */ 291#define ATAPI_PLAY_MSF 0x47 /* play by MSF address */ 292#define ATAPI_PLAY_TRACK 0x48 /* play by track number */ 293#define ATAPI_PAUSE 0x4b /* pause audio operation */ 294#define ATAPI_READ_DISK_INFO 0x51 /* get disk info structure */ 295#define ATAPI_READ_TRACK_INFO 0x52 /* get track info structure */ 296#define ATAPI_RESERVE_TRACK 0x53 /* reserve track */ 297#define ATAPI_SEND_OPC_INFO 0x54 /* send OPC structurek */ 298#define ATAPI_MODE_SELECT_BIG 0x55 /* set device parameters */ 299#define ATAPI_REPAIR_TRACK 0x58 /* repair track */ 300#define ATAPI_READ_MASTER_CUE 0x59 /* read master CUE info */ 301#define ATAPI_MODE_SENSE_BIG 0x5a /* get device parameters */ 302#define ATAPI_CLOSE_TRACK 0x5b /* close track/session */ 303#define ATAPI_READ_BUFFER_CAPACITY 0x5c /* get buffer capicity */ 304#define ATAPI_SEND_CUE_SHEET 0x5d /* send CUE sheet */ 305#define ATAPI_BLANK 0xa1 /* blank the media */ 306#define ATAPI_SEND_KEY 0xa3 /* send DVD key structure */ 307#define ATAPI_REPORT_KEY 0xa4 /* get DVD key structure */ 308#define ATAPI_PLAY_12 0xa5 /* play by lba */ 309#define ATAPI_LOAD_UNLOAD 0xa6 /* changer control command */ 310#define ATAPI_READ_STRUCTURE 0xad /* get DVD structure */ 311#define ATAPI_PLAY_CD 0xb4 /* universal play command */ 312#define ATAPI_SET_SPEED 0xbb /* set drive speed */ 313#define ATAPI_MECH_STATUS 0xbd /* get changer status */ 314#define ATAPI_READ_CD 0xbe /* read data */ 315#define ATAPI_POLL_DSC 0xff /* poll DSC status bit */ 316 317struct ata_cmd { 318 int channel; 319 int device; 320 int cmd; 321#define ATAGMAXCHANNEL 0x0101 322#define ATAGPARM 0x0102 323#define ATAGMODE 0x0103 324#define ATASMODE 0x0104 325#define ATAREQUEST 0x0108 326#define ATAREINIT 0x0110 327#define ATAATTACH 0x0111 328#define ATADETACH 0x0112 329#define ATARAIDCREATE 0x0120 330#define ATARAIDDELETE 0x0121 331#define ATARAIDSTATUS 0x0122 332#define ATARAIDADDSPARE 0x0123 333#define ATARAIDREBUILD 0x0124 334#define ATAENCSTAT 0x0130 335 336 union { 337 int maxchan; 338 339 struct { 340 int type[2]; 341 char name[2][32]; 342 struct ata_params params[2]; 343 } param; 344 345 struct { 346 int mode[2]; 347 } mode; 348 349 struct { 350 union { 351 struct { 352 u_int8_t command; 353 u_int8_t feature; 354 u_int64_t lba; 355 u_int16_t count; 356 } ata; 357 struct { 358 char ccb[16]; 359 } atapi; 360 } u; 361 caddr_t data; 362 int count; 363 int flags; 364#define ATA_CMD_CONTROL 0x01 365#define ATA_CMD_READ 0x02 366#define ATA_CMD_WRITE 0x04 367#define ATA_CMD_ATAPI 0x08 368 369 int timeout; 370 int error; 371 } request; 372 373 struct raid_setup { 374 int type; 375#define AR_JBOD 0x01 376#define AR_SPAN 0x02 377#define AR_RAID0 0x04 378#define AR_RAID1 0x08 379#define AR_RAID01 0x10 380#define AR_RAID3 0x20 381#define AR_RAID4 0x40 382#define AR_RAID5 0x80 383 384 int total_disks; 385 int disks[16]; 386 int interleave; 387 int unit; 388 } raid_setup; 389 390 struct raid_status { 391 int type; 392 int total_disks; 393 int disks[16]; 394 int interleave; 395 int status; 396#define AR_READY 1 397#define AR_DEGRADED 2 398#define AR_REBUILDING 4 399 400 int progress; 401 } raid_status; 402 403 struct { 404 int disk; 405 } raid_spare; 406 407 struct { 408 int fan; 409 int temp; 410 int v05; 411 int v12; 412 } enclosure; 413 } u; 414}; 415 416#define IOCATA _IOWR('a', 1, struct ata_cmd) 417 418#endif /* _SYS_ATA_H_ */ 419