make.conf revision 81557
1# $FreeBSD: head/share/examples/etc/make.conf 81557 2001-08-12 18:47:56Z markm $ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 8# It allows you to override macro definitions to make without changing 9# your source tree, or anything the source tree installs. 10# 11# This file must be in valid Makefile syntax. 12# 13# You have to find the things you can put here in the Makefiles and 14# documentation of the source tree. 15# 16# 17# The CPUTYPE variable controls which processor should be targetted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognised: 24# Intel x86 architecture: 25# (AMD CPUs) k7 k6-2 k6 k5 26# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 27# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4 28# Intel ia64 architecture: itanium 29# 30#CPUTYPE=i686 31#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 32#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 33# 34# CFLAGS controls the compiler settings used when compiling C code. 35# Note that optimization settings above -O (-O2, ...) are not recommended 36# or supported for compiling the world or the kernel - please revert any 37# nonstandard optimization settings to "-O" before submitting bug reports 38# to the developers. 39# Note also that at this time the -O2 setting is known to produce BROKEN 40# CODE on the Alpha platform. 41# 42#CFLAGS= -O -pipe 43# 44# CXXFLAGS controls the compiler settings used when compiling C++ code. 45# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 46# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 47# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 48# 49#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 50# 51# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 52# for use in developing FreeBSD and testing changes. They can be used by 53# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 54# included here due to compiler bugs, eg: mkdir()'s mode_t argument. 55# 56BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 57 -Wcast-qual -Wchar-subscripts -Winline \ 58 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 59 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 60# 61# To compile just the kernel with special optimizations, you should use 62# this instead of CFLAGS (which is not applicable to kernel builds anyway). 63# There is very little to gain by using higher optimization levels, and doing 64# so can cause problems. 65# 66#COPTFLAGS= -O -pipe 67# 68# Compare before install 69#INSTALL=install -C 70# 71# Mtree will follow symlinks 72#MTREE_FOLLOWS_SYMLINKS= -L 73# 74# To enable installing suidperl with the setuid bit turned on 75#ENABLE_SUIDPERL= true 76# 77# To build ppp with normal permissions 78#PPP_NOSUID= true 79# 80# To enable installing ssh(1) with the setuid bit turned on 81#ENABLE_SUID_SSH= true 82# 83# To avoid building various parts of the base system: 84#NO_CVS= true # do not build CVS 85#NO_BIND= true # do not build BIND 86#NO_FORTRAN= true # do not build g77 and related libraries 87#NO_I4B= true # do not build isdn4bsd package 88#NO_LPR= true # do not build lpr and related programs 89#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 90#NO_MODULES= true # do not build modules with the kernel 91#NO_OBJC= true # do not build Objective C support 92#NO_OPENSSH= true # do not build OpenSSH 93#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 94#NO_SENDMAIL= true # do not build sendmail and related programs 95#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 96#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 97#NO_X= true # do not compile in XWindows support (e.g. doscmd) 98#NOCRYPT= true # do not build any crypto code 99#NOGAMES= true # do not build games (games/ subdir) 100#NOINFO= true # do not make or install info files 101#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 102#NOPERL= true # do not build perl. Disables OpenSSL optimizations 103#NOPROFILE= true # Avoid compiling profiled libraries 104#NOSECURE= true # do not build crypto code in secure/ subdir 105#NOSHARE= true # do not go into the share subdir 106#NOUUCP= true # do not build uucp related programs 107# 108# To build the OpenSSL manpages, uncomment the following. These are not 109# built by default because they clobber a number of system manpages with 110# manpages describing parts of the OpenSSL toolkit, including passwd(1), 111# err(3), md5(3), and others. 112# 113#WANT_OPENSSL_MANPAGES= true 114# 115# To build sys/modules when building the world (our old way of doing things) 116#MODULES_WITH_WORLD=true # do not build modules when building kernel 117# 118# 119# The following controls building optional IDEA code in libcrypto and 120# certain ports. Patents are involved - you must not use this unless 121# you either have a license or fall within patent 'fair use' 122# provisions. 123# 124# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 125# 126# IDEA is patented in the USA and many european countries - thought to 127# be OK to use for any non-commercial use. This is optional. 128#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 129# 130# To avoid running MAKEDEV all on /dev during install set NO_MAKEDEV_RUN. 131# If you don't want to install MAKEDEV set NO_MAKEDEV_INSTALL, this implies 132# NO_MAKEDEV_RUN. 133#NO_MAKEDEV_INSTALL= true 134#NO_MAKEDEV_RUN= true 135# 136# If you do not want unformatted manual pages to be compressed 137# when they are installed: 138# 139#NOMANCOMPRESS= true 140# 141# 142# If you want the "compat" shared libraries installed as part of your normal 143# builds, uncomment these: 144# 145#COMPAT1X= yes 146#COMPAT20= yes 147#COMPAT21= yes 148#COMPAT22= yes 149#COMPAT3X= yes 150#COMPAT4X= yes 151# 152# 153# If you do not want additional documentation (some of which are 154# a few hundred KB's) for ports to be installed: 155# 156#NOPORTDOCS= true 157# 158# 159# Default format for system documentation, depends on your printer. 160# Set this to "ascii" for simple printers or screen 161# 162#PRINTERDEVICE= ps 163# 164# 165# How long to wait for a console keypress before booting the default kernel. 166# This value is approximately in milliseconds. Keypresses are accepted by the 167# BIOS before booting from disk, making it possible to give custom boot 168# parameters even when this is set to 0. 169# 170#BOOTWAIT=0 171#BOOTWAIT=30000 172# 173# By default, the system will always use the keyboard/video card as system 174# console. However, the boot blocks may be dynamically configured to use a 175# serial port in addition to or instead of the keyboard/video console. 176# 177# By default we use COM1 as our serial console port *if* we're going to use 178# a serial port as our console at all. Alter as necessary. 179# 180# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 181# 182#BOOT_COMCONSOLE_PORT= 0x3F8 183# 184# The default serial console speed is 9600. Set the speed to a larger value 185# for better interactive response. 186# 187#BOOT_COMCONSOLE_SPEED= 115200 188# 189# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 190# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 191# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 192# still mount the server's '/' (i.e. rather then load the server's kernel). 193# 194#LOADER_TFTP_SUPPORT= YES 195# 196# By default, the ports collection attempts to use XFree86 3.3.X. If 197# you are running XFree86 4.X, uncomment this line. 198# 199#XFREE86_VERSION= 4 200# 201# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 202# If you have a XFree86 from before 3.0 that has the X distribution in 203# /usr/X386, you want to uncomment this. 204# 205#X11BASE= /usr/X386 206# 207# 208# If you have Motif on your system, uncomment this. 209# 210#HAVE_MOTIF= yes 211#MOTIF_STATIC= yes 212# 213# If the default location of the Motif library (specified below) is NOT 214# appropriate for you, uncomment this and change it to the correct value. 215# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 216# 217#MOTIFLIB= -L${X11BASE}/lib -lXm 218# 219# 220# If you're resident in the USA, this will help various ports to determine 221# whether or not they should attempt to comply with the various U.S. 222# export regulations on certain types of software which do not apply to 223# anyone else in the world. 224# 225#USA_RESIDENT= YES 226# 227# 228# Override "don't install a port that's already installed" behavior. 229# One might wish to do this for ports debugging or to unconditionally 230# reinstall a set of suspect/broken ports. 231# 232#FORCE_PKG_REGISTER= YES 233# 234# 235# If you're behind a firewall and need FTP or HTTP proxy services for 236# ports collection fetching to work, the following examples give the 237# necessary syntax. See the fetch(3) man page for details. 238# 239#FTP_PROXY= 10.0.0.1:21 240#HTTP_PROXY= 10.0.0.1:80 241# 242# 243# Port master sites. 244# 245# If you want your port fetches to go somewhere else than the default 246# (specified below) in case the distfile/patchfile was not found, 247# uncomment this and change it to a location nearest you. (Don't 248# remove the "/${DIST_SUBDIR}/" part.) 249# 250#MASTER_SITE_BACKUP?= \ 251# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 252# 253# If you want your port fetches to check the above site first (before 254# the MASTER_SITES specified in the port Makefiles), uncomment the 255# line below. You can also change the right side to point to wherever 256# you want. 257# 258#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 259# 260# Some ports use a special variable to point to a collection of 261# mirrors of well-known software archives. If you have a mirror close 262# to you, uncomment any of the following lines and change it to that 263# address. (Don't remove the "/%SUBDIR%/" part.) 264# 265# Note: the right hand sides of the following lines are only for your 266# information. For a full list of default sites, take a look at 267# bsd.sites.mk. 268# 269#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 270#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 271#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/ 272#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ 273#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 274#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 275#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ 276#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ 277#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ 278#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 279#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ 280#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ 281#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/ 282#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ 283#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ 284#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 285#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ 286#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 287#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ 288#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 289#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 290#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ 291#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ 292# 293# Also it is highly recommended that you configure MASTER_SORT_REGEX 294# to choose better mirror sites for you. List awk(1)-style regular 295# expressions separated by space so MASTER_SITES will be sorted in 296# that order. The following example is for Japanese users; change 297# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 298# of your nearest/upstream networks to meet your needs. 299# 300#MASTER_SORT_REGEX?= ^file: ^ftp://ftp\.FreeBSD\.org/pub/FreeBSD/ports/local-distfiles/ ://[^/]*\.jp/ ://[^/]*\.jp\. 301# 302# Ports can place their working directories somewhere other than under 303# /usr/ports. 304#WRKDIRPREFIX= /var/tmp 305# 306# Kerberos IV 307# If you want KerberosIV (KTH eBones), define this: 308# 309#MAKE_KERBEROS4= yes 310# 311# 312# Kerberos 5 313# If you want Kerberos 5 (KTH Heimdal), define this: 314# 315#MAKE_KERBEROS5= yes 316# 317# 318# Kerberos5 319# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 320# define this (this is also used to tell ssh1 that kerberos is needed): 321# 322#KRB5_HOME= /usr/local 323# 324# 325# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 326# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 327# information on CVSup and these files). To use, do "make update" in /usr/src. 328# 329#SUP_UPDATE= yes 330# 331#SUP= /usr/local/bin/cvsup 332#SUPFLAGS= -g -L 2 333#SUPHOST= cvsup.uk.FreeBSD.org 334#SUPFILE= /usr/share/examples/cvsup/standard-supfile 335#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 336#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 337# 338# top(1) uses a hash table for the user names. The size of this hash 339# can be tuned to match the number of local users. The table size should 340# be a prime number approximately twice as large as the number of lines in 341# /etc/passwd. The default number is 20011. 342# 343#TOP_TABLE_SIZE= 101 344# 345# Documentation 346# 347# The list of languages and encodings to build and install 348# 349#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 350# 351# 352# sendmail 353# 354# The following sets the default m4 configuration file to use at 355# install time. Use with caution as a make install will overwrite 356# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 357# deprecated. The value should be a fully qualified path name. 358# 359#SENDMAIL_MC=/etc/mail/myconfig.mc 360# 361# If you need to build additional .cf files during a make buildworld, 362# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 363# 364#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 365# 366# Setting the following variable modifies the flags passed to m4 when 367# building a .cf file from a .mc file. It can be used to enable 368# features disabled by default. 369# 370#SENDMAIL_M4_FLAGS= 371# 372# Setting the following variables modifies the build environment for 373# sendmail and its related utilities. For example, SASL support can be 374# added with settings such as: 375# 376# SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL 377# SENDMAIL_LDFLAGS=-L/usr/local/lib 378# SENDMAIL_LDADD=-lsasl 379# 380# Note: If you are using Cyrus SASL with other applications which require 381# access to the sasldb file, you should add '-D_FFR_UNSAFE_SASL' to 382# SENDMAIL_CFLAGS. Also, add the following to your sendmail.mc file: 383# 384# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLFile') 385# 386#SENDMAIL_CFLAGS= 387#SENDMAIL_LDFLAGS= 388#SENDMAIL_LDADD= 389#SENDMAIL_DPADD= 390