make.conf revision 77262
1# $FreeBSD: head/share/examples/etc/make.conf 77262 2001-05-27 11:23:31Z sheldonh $ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 8# It allows you to override macro definitions to make without changing 9# your source tree, or anything the source tree installs. 10# 11# This file must be in valid Makefile syntax. 12# 13# You have to find the things you can put here in the Makefiles and 14# documentation of the source tree. 15# 16# 17# The CPUTYPE variable controls which processor should be targetted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognised: 24# Intel x86 architecture: 25# (AMD CPUs) k7 k6-2 k6 k5 26# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 27# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4 28# Intel ia64 architecture: itanium 29# 30#CPUTYPE=i686 31#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 32#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 33# 34# CFLAGS controls the compiler settings used when compiling C code. 35# Note that optimization settings above -O (-O2, ...) are not recommended 36# or supported for compiling the world or the kernel - please revert any 37# nonstandard optimization settings to "-O" before submitting bug reports 38# to the developers. 39# Note also that at this time the -O2 setting is known to produce BROKEN 40# CODE on the Alpha platform. 41# 42#CFLAGS= -O -pipe 43# 44# CXXFLAGS controls the compiler settings used when compiling C++ code. 45# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 46# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 47# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 48# 49#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 50# 51# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 52# for use in developing FreeBSD and testing changes. They can be used by 53# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. 54# 55BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 56 -Wcast-qual -Wchar-subscripts -Wconversion -Winline \ 57 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 58 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 59# 60# To compile just the kernel with special optimizations, you should use 61# this instead of CFLAGS (which is not applicable to kernel builds anyway). 62# There is very little to gain by using higher optimization levels, and doing 63# so can cause problems. 64# 65#COPTFLAGS= -O -pipe 66# 67# Compare before install 68#INSTALL=install -C 69# 70# Mtree will follow symlinks 71#MTREE_FOLLOWS_SYMLINKS= -L 72# 73# To enable installing suidperl with the setuid bit turned on 74#ENABLE_SUIDPERL= true 75# 76# To build perl with experimental thread support 77# Do NOT enable this unless you have read the installation documentation 78# from the Perl distribution and understand the implications. 79#PERL_THREADED= true 80# 81# To build ppp with normal permissions 82#PPP_NOSUID= true 83# 84# To enable installing ssh(1) with the setuid bit turned on 85#ENABLE_SUID_SSH= true 86# 87# To avoid building various parts of the base system: 88#NO_CVS= true # do not build CVS 89#NO_BIND= true # do not build BIND 90#NO_FORTRAN= true # do not build g77 and related libraries 91#NO_I4B= true # do not build isdn4bsd package 92#NO_LPR= true # do not build lpr and related programs 93#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 94#NO_MODULES= true # do not build modules with the kernel 95#NO_OBJC= true # do not build Objective C support 96#NO_OPENSSH= true # do not build OpenSSH 97#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 98#NO_SENDMAIL= true # do not build sendmail and related programs 99#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 100#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 101#NO_X= true # do not compile in XWindows support (e.g. doscmd) 102#NOCRYPT= true # do not build any crypto code 103#NOGAMES= true # do not build games (games/ subdir) 104#NOINFO= true # do not make or install info files 105#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 106#NOPERL= true # do not build perl. Disables OpenSSL optimizations 107#NOPROFILE= true # Avoid compiling profiled libraries 108#NOSECURE= true # do not build crypto code in secure/ subdir 109#NOSHARE= true # do not go into the share subdir 110#NOUUCP= true # do not build uucp related programs 111# 112# To build the OpenSSL manpages, uncomment the following. These are not 113# built by default because they clobber a number of system manpages with 114# manpages describing parts of the OpenSSL toolkit, including passwd(1), 115# err(3), md5(3), and others. 116# 117#WANT_OPENSSL_MANPAGES= true 118# 119# To build sys/modules when building the world (our old way of doing things) 120#MODULES_WITH_WORLD=true # do not build modules when building kernel 121# 122# 123# The following controls building optional IDEA code in libcrypto and 124# certain ports. Patents are involved - you must not use this unless 125# you either have a license or fall within patent 'fair use' 126# provisions. 127# 128# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 129# 130# IDEA is patented in the USA and many european countries - thought to 131# be OK to use for any non-commercial use. This is optional. 132#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 133# 134# To avoid running MAKEDEV all on /dev during install set NO_MAKEDEV_RUN. 135# If you don't want to install MAKEDEV set NO_MAKEDEV_INSTALL, this implies 136# NO_MAKEDEV_RUN. 137#NO_MAKEDEV_INSTALL= true 138#NO_MAKEDEV_RUN= true 139# 140# If you do not want unformatted manual pages to be compressed 141# when they are installed: 142# 143#NOMANCOMPRESS= true 144# 145# 146# If you want the "compat" shared libraries installed as part of your normal 147# builds, uncomment these: 148# 149#COMPAT1X= yes 150#COMPAT20= yes 151#COMPAT21= yes 152#COMPAT22= yes 153#COMPAT3X= yes 154#COMPAT4X= yes 155# 156# 157# If you do not want additional documentation (some of which are 158# a few hundred KB's) for ports to be installed: 159# 160#NOPORTDOCS= true 161# 162# 163# Default format for system documentation, depends on your printer. 164# Set this to "ascii" for simple printers or screen 165# 166#PRINTERDEVICE= ps 167# 168# 169# How long to wait for a console keypress before booting the default kernel. 170# This value is approximately in milliseconds. Keypresses are accepted by the 171# BIOS before booting from disk, making it possible to give custom boot 172# parameters even when this is set to 0. 173# 174#BOOTWAIT=0 175#BOOTWAIT=30000 176# 177# By default, the system will always use the keyboard/video card as system 178# console. However, the boot blocks may be dynamically configured to use a 179# serial port in addition to or instead of the keyboard/video console. 180# 181# By default we use COM1 as our serial console port *if* we're going to use 182# a serial port as our console at all. Alter as necessary. 183# 184# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 185# 186#BOOT_COMCONSOLE_PORT= 0x3F8 187# 188# The default serial console speed is 9600. Set the speed to a larger value 189# for better interactive response. 190# 191#BOOT_COMCONSOLE_SPEED= 115200 192# 193# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 194# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 195# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 196# still mount the server's '/' (i.e. rather then load the server's kernel). 197# 198#LOADER_TFTP_SUPPORT= YES 199# 200# By default, the ports collection attempts to use XFree86 3.3.X. If 201# you are running XFree86 4.X, uncomment this line. 202# 203#XFREE86_VERSION= 4 204# 205# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 206# If you have a XFree86 from before 3.0 that has the X distribution in 207# /usr/X386, you want to uncomment this. 208# 209#X11BASE= /usr/X386 210# 211# 212# If you have Motif on your system, uncomment this. 213# 214#HAVE_MOTIF= yes 215#MOTIF_STATIC= yes 216# 217# If the default location of the Motif library (specified below) is NOT 218# appropriate for you, uncomment this and change it to the correct value. 219# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 220# 221#MOTIFLIB= -L${X11BASE}/lib -lXm 222# 223# 224# If you're resident in the USA, this will help various ports to determine 225# whether or not they should attempt to comply with the various U.S. 226# export regulations on certain types of software which do not apply to 227# anyone else in the world. 228# 229#USA_RESIDENT= YES 230# 231# 232# Override "don't install a port that's already installed" behavior. 233# One might wish to do this for ports debugging or to unconditionally 234# reinstall a set of suspect/broken ports. 235# 236#FORCE_PKG_REGISTER= YES 237# 238# 239# If you're behind a firewall and need FTP or HTTP proxy services for 240# ports collection fetching to work, the following examples give the 241# necessary syntax. See the fetch(3) man page for details. 242# 243#FTP_PROXY= 10.0.0.1:21 244#HTTP_PROXY= 10.0.0.1:80 245# 246# 247# Port master sites. 248# 249# If you want your port fetches to go somewhere else than the default 250# (specified below) in case the distfile/patchfile was not found, 251# uncomment this and change it to a location nearest you. (Don't 252# remove the "/${DIST_SUBDIR}/" part.) 253# 254#MASTER_SITE_BACKUP?= \ 255# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 256# 257# If you want your port fetches to check the above site first (before 258# the MASTER_SITES specified in the port Makefiles), uncomment the 259# line below. You can also change the right side to point to wherever 260# you want. 261# 262#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 263# 264# Some ports use a special variable to point to a collection of 265# mirrors of well-known software archives. If you have a mirror close 266# to you, uncomment any of the following lines and change it to that 267# address. (Don't remove the "/%SUBDIR%/" part.) 268# 269# Note: the right hand sides of the following lines are only for your 270# information. For a full list of default sites, take a look at 271# bsd.sites.mk. 272# 273#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 274#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 275#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ 276#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 277#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 278#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ 279#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ 280#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ 281#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 282#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ 283#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ 284#MASTER_SITE_RUBY= ftp://ftp.netlab.co.jp/pub/lang/ruby/%SUBDIR%/ 285#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ 286#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ 287#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 288#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ 289#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 290#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ 291#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 292#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 293#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ 294#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ 295# 296# Also it is highly recommended that you configure MASTER_SORT_REGEX 297# to choose better mirror sites for you. List awk(1)-style regular 298# expressions separated by space so MASTER_SITES will be sorted in 299# that order. The following example is for Japanese users; change 300# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 301# of your nearest/upstream networks to meet your needs. 302# 303#MASTER_SORT_REGEX?= ^file: ^ftp://ftp\.FreeBSD\.org/pub/FreeBSD/ports/local-distfiles/ ://[^/]*\.jp/ ://[^/]*\.jp\. 304# 305# Kerberos IV 306# If you want KerberosIV (KTH eBones), define this: 307# 308#MAKE_KERBEROS4= yes 309# 310# 311# Kerberos 5 312# If you want Kerberos 5 (KTH Heimdal), define this: 313# 314#MAKE_KERBEROS5= yes 315# 316# 317# Kerberos5 318# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 319# define this (this is also used to tell ssh1 that kerberos is needed): 320# 321#KRB5_HOME= /usr/local 322# 323# 324# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 325# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 326# information on CVSup and these files). To use, do "make update" in /usr/src. 327# 328#SUP_UPDATE= yes 329# 330#SUP= /usr/local/bin/cvsup 331#SUPFLAGS= -g -L 2 332#SUPHOST= cvsup.uk.FreeBSD.org 333#SUPFILE= /usr/share/examples/cvsup/standard-supfile 334#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 335#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 336# 337# top(1) uses a hash table for the user names. The size of this hash 338# can be tuned to match the number of local users. The table size should 339# be a prime number approximately twice as large as the number of lines in 340# /etc/passwd. The default number is 20011. 341# 342#TOP_TABLE_SIZE= 101 343# 344# Documentation 345# 346# The list of languages and encodings to build and install 347# 348#DOC_LANG= en_US.ISO_8859-1 ru_RU.KOI8-R 349# 350# 351# sendmail 352# 353# The following sets the default m4 configuration file to use at 354# install time. Use with caution as a make install will overwrite 355# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 356# deprecated. The value should be a fully qualified path name. 357# 358#SENDMAIL_MC=/etc/mail/myconfig.mc 359# 360# If you need to build additional .cf files during a make buildworld, 361# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 362# 363#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 364# 365# Setting the following variables modifes the build environment for 366# sendmail and its related utilities. For example, SASL support can be 367# added with settings such as: 368# 369# SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL 370# SENDMAIL_LDFLAGS=-L/usr/local/lib 371# SENDMAIL_LDADD=-lsasl 372# 373# Note: If you are using Cyrus SASL with other applications which require 374# access to the sasldb file, you should add '-D_FFR_UNSAFE_SASL' to 375# SENDMAIL_CFLAGS. Also, add the following to your sendmail.mc file: 376# 377# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLFile') 378# 379#SENDMAIL_CFLAGS= 380#SENDMAIL_LDFLAGS= 381#SENDMAIL_LDADD= 382#SENDMAIL_DPADD= 383