make.conf revision 76073
1# $FreeBSD: head/share/examples/etc/make.conf 76073 2001-04-27 12:15:15Z ru $ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 8# It allows you to override macro definitions to make without changing 9# your source tree, or anything the source tree installs. 10# 11# This file must be in valid Makefile syntax. 12# 13# You have to find the things you can put here in the Makefiles and 14# documentation of the source tree. 15# 16# 17# The CPUTYPE variable controls which processor should be targetted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognised: 24# Intel x86 architecture: 25# (AMD CPUs) k7 k6-2 k6 k5 26# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 27# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4 28# Intel ia64 architecture: itanium 29# 30#CPUTYPE=i686 31#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 32#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 33# 34# CFLAGS controls the compiler settings used when compiling C code. 35# Note that optimization settings above -O (-O2, ...) are not recommended 36# or supported for compiling the world or the kernel - please revert any 37# nonstandard optimization settings to "-O" before submitting bug reports 38# to the developers. 39# Note also that at this time the -O2 setting is known to produce BROKEN 40# CODE on the Alpha platform. 41# 42#CFLAGS= -O -pipe 43# 44# CXXFLAGS controls the compiler settings used when compiling C++ code. 45# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 46# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 47# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 48# 49#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 50# 51# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 52# for use in developing FreeBSD and testing changes. They can be used by 53# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. 54# 55BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 56 -Wcast-qual -Wchar-subscripts -Wconversion -Winline \ 57 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 58 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 59# 60# To compile just the kernel with special optimizations, you should use 61# this instead of CFLAGS (which is not applicable to kernel builds anyway). 62# There is very little to gain by using higher optimization levels, and doing 63# so can cause problems. 64# 65#COPTFLAGS= -O -pipe 66# 67# Compare before install 68#INSTALL=install -C 69# 70# Mtree will follow symlinks 71#MTREE_FOLLOWS_SYMLINKS= -L 72# 73# To enable installing suidperl with the setuid bit turned on 74#ENABLE_SUIDPERL= true 75# 76# To build perl with thread support 77#PERL_THREADED= true 78# 79# To build ppp with normal permissions 80#PPP_NOSUID= true 81# 82# To enable installing ssh(1) with the setuid bit turned on 83#ENABLE_SUID_SSH= true 84# 85# To avoid building various parts of the base system: 86#NO_CVS= true # do not build CVS 87#NO_BIND= true # do not build BIND 88#NO_FORTRAN= true # do not build g77 and related libraries 89#NO_LPR= true # do not build lpr and related programs 90#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 91#NO_MODULES= true # do not build modules with the kernel 92#NO_OBJC= true # do not build Objective C support 93#NO_OPENSSH= true # do not build OpenSSH 94#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 95#NO_SENDMAIL= true # do not build sendmail and related programs 96#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 97#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 98#NO_X= true # do not compile in XWindows support (e.g. doscmd) 99#NOCRYPT= true # do not build any crypto code 100#NOGAMES= true # do not build games (games/ subdir) 101#NOINFO= true # do not make or install info files 102#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 103#NOPERL= true # do not build perl. Disables OpenSSL optimizations 104#NOPROFILE= true # Avoid compiling profiled libraries 105#NOSECURE= true # do not build crypto code in secure/ subdir 106#NOSHARE= true # do not go into the share subdir 107#NOUUCP= true # do not build uucp related programs 108# 109# To build the OpenSSL manpages, uncomment the following. These are not 110# built by default because they clobber a number of system manpages with 111# manpages describing parts of the OpenSSL toolkit, including passwd(1), 112# err(3), md5(3), and others. 113# 114#WANT_OPENSSL_MANPAGES= true 115# 116# To build sys/modules when building the world (our old way of doing things) 117#MODULES_WITH_WORLD=true # do not build modules when building kernel 118# 119# 120# The following controls building optional IDEA code in libcrypto and 121# certain ports. Patents are involved - you must not use this unless 122# you either have a license or fall within patent 'fair use' 123# provisions. 124# 125# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 126# 127# IDEA is patented in the USA and many european countries - thought to 128# be OK to use for any non-commercial use. This is optional. 129#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 130# 131# To avoid running MAKEDEV all on /dev during install set NO_MAKEDEV_RUN. 132# If you don't want to install MAKEDEV set NO_MAKEDEV_INSTALL, this implies 133# NO_MAKEDEV_RUN. 134#NO_MAKEDEV_INSTALL= true 135#NO_MAKEDEV_RUN= true 136# 137# If you do not want unformatted manual pages to be compressed 138# when they are installed: 139# 140#NOMANCOMPRESS= true 141# 142# 143# If you want the "compat" shared libraries installed as part of your normal 144# builds, uncomment these: 145# 146#COMPAT1X= yes 147#COMPAT20= yes 148#COMPAT21= yes 149#COMPAT22= yes 150#COMPAT3X= yes 151#COMPAT4X= yes 152# 153# 154# If you do not want additional documentation (some of which are 155# a few hundred KB's) for ports to be installed: 156# 157#NOPORTDOCS= true 158# 159# 160# Default format for system documentation, depends on your printer. 161# Set this to "ascii" for simple printers or screen 162# 163#PRINTERDEVICE= ps 164# 165# 166# How long to wait for a console keypress before booting the default kernel. 167# This value is approximately in milliseconds. Keypresses are accepted by the 168# BIOS before booting from disk, making it possible to give custom boot 169# parameters even when this is set to 0. 170# 171#BOOTWAIT=0 172#BOOTWAIT=30000 173# 174# By default, the system will always use the keyboard/video card as system 175# console. However, the boot blocks may be dynamically configured to use a 176# serial port in addition to or instead of the keyboard/video console. 177# 178# By default we use COM1 as our serial console port *if* we're going to use 179# a serial port as our console at all. Alter as necessary. 180# 181# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 182# 183#BOOT_COMCONSOLE_PORT= 0x3F8 184# 185# The default serial console speed is 9600. Set the speed to a larger value 186# for better interactive response. 187# 188#BOOT_COMCONSOLE_SPEED= 115200 189# 190# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 191# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 192# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 193# still mount the server's '/' (i.e. rather then load the server's kernel). 194# 195#LOADER_TFTP_SUPPORT= YES 196# 197# By default, the ports collection attempts to use XFree86 3.3.X. If 198# you are running XFree86 4.X, uncomment this line. 199# 200#XFREE86_VERSION= 4 201# 202# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 203# If you have a XFree86 from before 3.0 that has the X distribution in 204# /usr/X386, you want to uncomment this. 205# 206#X11BASE= /usr/X386 207# 208# 209# If you have Motif on your system, uncomment this. 210# 211#HAVE_MOTIF= yes 212#MOTIF_STATIC= yes 213# 214# If the default location of the Motif library (specified below) is NOT 215# appropriate for you, uncomment this and change it to the correct value. 216# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 217# 218#MOTIFLIB= -L${X11BASE}/lib -lXm 219# 220# 221# If you're resident in the USA, this will help various ports to determine 222# whether or not they should attempt to comply with the various U.S. 223# export regulations on certain types of software which do not apply to 224# anyone else in the world. 225# 226#USA_RESIDENT= YES 227# 228# 229# Override "don't install a port that's already installed" behavior. 230# One might wish to do this for ports debugging or to unconditionally 231# reinstall a set of suspect/broken ports. 232# 233#FORCE_PKG_REGISTER= YES 234# 235# 236# If you're behind a firewall and need FTP or HTTP proxy services for 237# ports collection fetching to work, the following examples give the 238# necessary syntax. See the fetch(3) man page for details. 239# 240#FTP_PROXY= 10.0.0.1:21 241#HTTP_PROXY= 10.0.0.1:80 242# 243# 244# Port master sites. 245# 246# If you want your port fetches to go somewhere else than the default 247# (specified below) in case the distfile/patchfile was not found, 248# uncomment this and change it to a location nearest you. (Don't 249# remove the "/${DIST_SUBDIR}/" part.) 250# 251#MASTER_SITE_BACKUP?= \ 252# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 253# 254# If you want your port fetches to check the above site first (before 255# the MASTER_SITES specified in the port Makefiles), uncomment the 256# line below. You can also change the right side to point to wherever 257# you want. 258# 259#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 260# 261# Some ports use a special variable to point to a collection of 262# mirrors of well-known software archives. If you have a mirror close 263# to you, uncomment any of the following lines and change it to that 264# address. (Don't remove the "/%SUBDIR%/" part.) 265# 266# Note: the right hand sides of the following lines are only for your 267# information. For a full list of default sites, take a look at 268# bsd.sites.mk. 269# 270#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 271#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 272#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ 273#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 274#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 275#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ 276#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ 277#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ 278#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 279#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ 280#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ 281#MASTER_SITE_RUBY= ftp://ftp.netlab.co.jp/pub/lang/ruby/%SUBDIR%/ 282#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ 283#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ 284#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 285#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ 286#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 287#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ 288#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 289#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 290#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ 291#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ 292# 293# Also it is highly recommended that you configure MASTER_SORT_REGEX 294# to choose better mirror sites for you. List awk(1)-style regular 295# expressions separated by space so MASTER_SITES will be sorted in 296# that order. The following example is for Japanese users; change 297# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 298# of your nearest/upstream networks to meet your needs. 299# 300#MASTER_SORT_REGEX?= ^file: ^ftp://ftp\.FreeBSD\.org/pub/FreeBSD/ports/local-distfiles/ ://[^/]*\.jp/ ://[^/]*\.jp\. 301# 302# Kerberos IV 303# If you want KerberosIV (KTH eBones), define this: 304# 305#MAKE_KERBEROS4= yes 306# 307# 308# Kerberos 5 309# If you want KerberosIV (KTH Heimdal), define this: 310# 311#MAKE_KERBEROS5= yes 312# 313# 314# Kerberos5 315# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 316# define this (this is also used to tell ssh1 that kerberos is needed): 317# 318#KRB5_HOME= /usr/local 319# 320# 321# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 322# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 323# information on CVSup and these files). To use, do "make update" in /usr/src. 324# 325#SUP_UPDATE= yes 326# 327#SUP= /usr/local/bin/cvsup 328#SUPFLAGS= -g -L 2 329#SUPHOST= cvsup.uk.FreeBSD.org 330#SUPFILE= /usr/share/examples/cvsup/standard-supfile 331#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 332#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 333# 334# top(1) uses a hash table for the user names. The size of this hash 335# can be tuned to match the number of local users. The table size should 336# be a prime number approximately twice as large as the number of lines in 337# /etc/passwd. The default number is 20011. 338# 339#TOP_TABLE_SIZE= 101 340# 341# Documentation 342# 343# The list of languages and encodings to build and install 344# 345#DOC_LANG= en_US.ISO_8859-1 ru_RU.KOI8-R 346# 347# 348# sendmail 349# 350# The following sets the default m4 configuration file to use at 351# install time. Use with caution as a make install will overwrite 352# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 353# deprecated. The value should be a fully qualified path name. 354# 355#SENDMAIL_MC=/etc/mail/myconfig.mc 356# 357# If you need to build additional .cf files during a make buildworld, 358# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 359# 360#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 361# 362# Setting the following variables modifes the build environment for 363# sendmail and its related utilities. For example, SASL support can be 364# added with settings such as: 365# 366# SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL 367# SENDMAIL_LDFLAGS=-L/usr/local/lib 368# SENDMAIL_LDADD=-lsasl 369# 370# Note: If you are using Cyrus SASL with other applications which require 371# access to the sasldb file, you should add '-D_FFR_UNSAFE_SASL' to 372# SENDMAIL_CFLAGS. Also, add the following to your sendmail.mc file: 373# 374# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLFile') 375# 376#SENDMAIL_CFLAGS= 377#SENDMAIL_LDFLAGS= 378#SENDMAIL_LDADD= 379#SENDMAIL_DPADD= 380