make.conf revision 103048
1# $FreeBSD: head/share/examples/etc/make.conf 103048 2002-09-07 01:26:11Z kris $ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# /etc/make.conf, if present, will be read by make (see 8# /usr/share/mk/sys.mk). It allows you to override macro definitions 9# to make without changing your source tree, or anything the source 10# tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# There are additional things you can put into /etc/make.conf. 15# You have to find those in the Makefiles and documentation of 16# the source tree. 17# 18# 19# The CPUTYPE variable controls which processor should be targeted for 20# generated code. This controls processor-specific optimizations in 21# certain code (currently only OpenSSL) as well as modifying the value 22# of CFLAGS to contain the appropriate optimization directive to gcc. 23# The automatic setting of CFLAGS may be overridden using the 24# NO_CPU_CFLAGS variable below. 25# Currently the following CPU types are recognized: 26# Intel x86 architecture: 27# (AMD CPUs) athlon-mp athlon-xp athlon-4 athlon-tbird athlon k6-3 28# k6-2 k6 k5 29# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 30# Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4 31# Intel ia64 architecture: itanium 32# 33# (?= allows to buildworld for a different CPUTYPE.) 34# 35#CPUTYPE?=i686 36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 38# 39# CFLAGS controls the compiler settings used when compiling C code. 40# Note that optimization settings above -O (-O2, ...) are not recommended 41# or supported for compiling the world or the kernel - please revert any 42# nonstandard optimization settings to "-O" before submitting bug reports 43# to the developers. 44# Note also that at this time the -O2 setting is known to produce BROKEN 45# CODE on the Alpha platform. 46# 47#CFLAGS= -O -pipe 48# 49# CXXFLAGS controls the compiler settings used when compiling C++ code. 50# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 51# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 52# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 53# 54#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 55# 56# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 57# for use in developing FreeBSD and testing changes. They can be used by 58# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 59# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 60# 61#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 62# -Wcast-qual -Wchar-subscripts -Winline \ 63# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 64# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 65# 66# To compile just the kernel with special optimizations, you should use 67# this instead of CFLAGS (which is not applicable to kernel builds anyway). 68# There is very little to gain by using higher optimization levels, and doing 69# so can cause problems. 70# 71#COPTFLAGS= -O -pipe 72# 73# To build the system compiler such that it forces high optimization levels to 74# a lower one. GCC -O2+ is known to trigger known optimizer bugs at various 75# times -- this is worse on the Alpha platform. The value assigned here will 76# be the highest optimization value used. 77#WANT_FORCE_OPTIMIZATION_DOWNGRADE=1 78# 79# Compare before install 80#INSTALL=install -C 81# 82# Mtree will follow symlinks 83#MTREE_FOLLOWS_SYMLINKS= -L 84# 85# To build ppp with normal permissions 86#PPP_NOSUID= true 87# 88# To enable installing ssh(1) with the setuid bit turned on 89#ENABLE_SUID_SSH= true 90# 91# To enable installing newgrp(1) with the setuid bit turned on. 92# Without the setuid bit, newgrp cannot change users' groups. 93#ENABLE_SUID_NEWGRP= true 94# 95# To avoid building various parts of the base system: 96#NO_CVS= true # do not build CVS 97#NO_CXX= true # do not build C++ and friends 98#NO_BIND= true # do not build BIND 99#NO_FORTRAN= true # do not build g77 and related libraries 100#NO_GDB= true # do not build GDB 101#NO_I4B= true # do not build isdn4bsd package 102#NO_IPFILTER= true # do not build IP Filter package 103#NO_LPR= true # do not build lpr and related programs 104#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 105#NO_MODULES= true # do not build modules with the kernel 106#NO_OBJC= true # do not build Objective C support 107#NO_OPENSSH= true # do not build OpenSSH 108#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 109#NO_PERL_WRAPPER= true # do not build the wrapper in /usr/bin/perl 110#NO_SENDMAIL= true # do not build sendmail and related programs 111#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 112#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 113#NO_X= true # do not compile in XWindows support (e.g. doscmd) 114#NOCRYPT= true # do not build any crypto code 115#NOGAMES= true # do not build games (games/ subdir) 116#NOINFO= true # do not make or install info files 117#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 118#NOPROFILE= true # Avoid compiling profiled libraries 119#NOSECURE= true # do not build crypto code in secure/ subdir 120#NOSHARE= true # do not go into the share subdir 121# 122# To build the OpenSSL manpages, uncomment the following. These are not 123# built by default because they clobber a number of system manpages with 124# manpages describing parts of the OpenSSL toolkit, including passwd(1), 125# err(3), md5(3), and others. 126# 127#WANT_OPENSSL_MANPAGES= true 128# 129# To build sys/modules when building the world (our old way of doing things) 130#MODULES_WITH_WORLD=true # do not build modules when building kernel 131# 132# The list of modules to build instead of all of them. 133#MODULES_OVERRIDE= linux ipfw 134# 135# The following controls building optional IDEA code in libcrypto and 136# certain ports. Patents are involved - you must not use this unless 137# you either have a license or fall within patent 'fair use' 138# provisions. 139# 140# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 141# 142# IDEA is patented in the USA and many European countries - thought to 143# be OK to use for any non-commercial use. This is optional. 144#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 145# 146# To avoid running MAKEDEV all on /dev during install set NO_MAKEDEV_RUN. 147# If you don't want to install MAKEDEV set NO_MAKEDEV_INSTALL, this implies 148# NO_MAKEDEV_RUN. 149#NO_MAKEDEV_INSTALL= true 150#NO_MAKEDEV_RUN= true 151# 152# If you do not want unformatted manual pages to be compressed 153# when they are installed: 154# 155#NOMANCOMPRESS= true 156# 157# 158# If you want the "compat" shared libraries installed as part of your normal 159# builds, uncomment these: 160# 161#COMPAT1X= yes 162#COMPAT20= yes 163#COMPAT21= yes 164#COMPAT22= yes 165#COMPAT3X= yes 166#COMPAT4X= yes 167# 168# 169# Default format for system documentation, depends on your printer. 170# Set this to "ascii" for simple printers or screen 171# 172#PRINTERDEVICE= ps 173# 174# 175# How long to wait for a console keypress before booting the default kernel. 176# This value is approximately in milliseconds. Keypresses are accepted by the 177# BIOS before booting from disk, making it possible to give custom boot 178# parameters even when this is set to 0. 179# 180#BOOTWAIT=0 181#BOOTWAIT=30000 182# 183# By default, the system will always use the keyboard/video card as system 184# console. However, the boot blocks may be dynamically configured to use a 185# serial port in addition to or instead of the keyboard/video console. 186# 187# By default we use COM1 as our serial console port *if* we're going to use 188# a serial port as our console at all. Alter as necessary. 189# 190# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 191# 192#BOOT_COMCONSOLE_PORT= 0x3F8 193# 194# The default serial console speed is 9600. Set the speed to a larger value 195# for better interactive response. 196# 197#BOOT_COMCONSOLE_SPEED= 115200 198# 199# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 200# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 201# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 202# still mount the server's '/' (i.e. rather than load the server's kernel). 203# 204#LOADER_TFTP_SUPPORT= YES 205# 206# 207# Kerberos IV 208# If you want KerberosIV (KTH eBones), define this: 209# 210#MAKE_KERBEROS4= yes 211# 212# 213# Kerberos 5 214# If you want Kerberos 5 (KTH Heimdal), define this: 215# 216#MAKE_KERBEROS5= yes 217# 218# Kerberos 5 su (k5su) 219# If you want to use the k5su utility, define this to have it installed 220# set-user-ID. 221#ENABLE_SUID_K5SU= yes 222# 223# 224# Kerberos5 225# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 226# define this (this is also used to tell ssh1 that kerberos is needed): 227# 228#KRB5_HOME= /usr/local 229# 230# 231# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 232# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 233# information on CVSup and these files). To use, do "make update" in /usr/src. 234# 235#SUP_UPDATE= yes 236# 237#SUP= /usr/local/bin/cvsup 238#SUPFLAGS= -g -L 2 239#SUPHOST= cvsup.uk.FreeBSD.org 240#SUPFILE= /usr/share/examples/cvsup/standard-supfile 241#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 242#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 243# 244# top(1) uses a hash table for the user names. The size of this hash 245# can be tuned to match the number of local users. The table size should 246# be a prime number approximately twice as large as the number of lines in 247# /etc/passwd. The default number is 20011. 248# 249#TOP_TABLE_SIZE= 101 250# 251# Documentation 252# 253# The list of languages and encodings to build and install 254# 255#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 256# 257# 258# sendmail 259# 260# The following sets the default m4 configuration file to use at 261# install time. Use with caution as a make install will overwrite 262# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 263# deprecated. The value should be a fully qualified path name. 264# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 265# create /etc/mail/sendmail.cf before installworld installs an 266# updated sendmail binary. 267# 268#SENDMAIL_MC=/etc/mail/myconfig.mc 269# 270# The following sets the default m4 configuration file for mail 271# submission to use at install time. Use with caution as a make 272# install will overwrite any existing /etc/mail/submit.cf. The 273# value should be a fully qualified path name. 274# Avoid using a value of /etc/mail/submit.mc as a buildworld will 275# create /etc/mail/submit.cf before installworld installs an 276# updated sendmail binary. 277# 278#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 279# 280# If you need to build additional .cf files during a make buildworld, 281# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 282# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 283# create /etc/mail/sendmail.cf before installworld installs an 284# updated sendmail binary. 285# 286#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 287# 288# Setting the following variable modifies the flags passed to m4 when 289# building a .cf file from a .mc file. It can be used to enable 290# features disabled by default. 291# 292#SENDMAIL_M4_FLAGS= 293# 294# Setting the following variables modifies the build environment for 295# sendmail and its related utilities. For example, SASL support can be 296# added with settings such as: 297# 298# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 299# SENDMAIL_LDFLAGS=-L/usr/local/lib 300# SENDMAIL_LDADD=-lsasl 301# 302# Note: If you are using Cyrus SASL with other applications which require 303# access to the sasldb file, you should add the following to your 304# sendmail.mc file: 305# 306# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 307# 308#SENDMAIL_CFLAGS= 309#SENDMAIL_LDFLAGS= 310#SENDMAIL_LDADD= 311#SENDMAIL_DPADD= 312# 313# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 314# set-user-ID root binary instead of a set-group-ID smmsp binary and will 315# prevent the installation of /etc/mail/submit.cf. 316# This is a deprecated mode of operation. See etc/mail/README for more 317# information. 318# 319#SENDMAIL_SET_USER_ID= 320# 321# The permissions to use on alias and map databases generated using 322# /etc/mail/Makefile. Defaults to 0640. 323# 324#SENDMAIL_MAP_PERMS= 325