bpf.c revision 252614
1/* $OpenBSD: bpf.c,v 1.13 2004/05/05 14:28:58 deraadt Exp $ */ 2 3/* BPF socket interface code, originally contributed by Archie Cobbs. */ 4 5/* 6 * Copyright (c) 1995, 1996, 1998, 1999 7 * The Internet Software Consortium. All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of The Internet Software Consortium nor the names 19 * of its contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND 23 * CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 24 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL THE INTERNET SOFTWARE CONSORTIUM OR 27 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 28 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 29 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 30 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 31 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 33 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * This software has been written for the Internet Software Consortium 37 * by Ted Lemon <mellon@fugue.com> in cooperation with Vixie 38 * Enterprises. To learn more about the Internet Software Consortium, 39 * see ``http://www.vix.com/isc''. To learn more about Vixie 40 * Enterprises, see ``http://www.vix.com''. 41 */ 42 43#include <sys/cdefs.h> 44__FBSDID("$FreeBSD: head/sbin/dhclient/bpf.c 252614 2013-07-03 21:45:29Z pjd $"); 45 46#include "dhcpd.h" 47#include <sys/ioctl.h> 48#include <sys/uio.h> 49 50#include <net/bpf.h> 51#include <netinet/in_systm.h> 52#include <netinet/ip.h> 53#include <netinet/udp.h> 54#include <netinet/if_ether.h> 55 56#define BPF_FORMAT "/dev/bpf%d" 57 58/* 59 * Called by get_interface_list for each interface that's discovered. 60 * Opens a packet filter for each interface and adds it to the select 61 * mask. 62 */ 63int 64if_register_bpf(struct interface_info *info) 65{ 66 char filename[50]; 67 int sock, b; 68 69 /* Open a BPF device */ 70 for (b = 0; 1; b++) { 71 snprintf(filename, sizeof(filename), BPF_FORMAT, b); 72 sock = open(filename, O_RDWR, 0); 73 if (sock < 0) { 74 if (errno == EBUSY) 75 continue; 76 else 77 error("Can't find free bpf: %m"); 78 } else 79 break; 80 } 81 82 /* Set the BPF device to point at this interface. */ 83 if (ioctl(sock, BIOCSETIF, info->ifp) < 0) 84 error("Can't attach interface %s to bpf device %s: %m", 85 info->name, filename); 86 87 return (sock); 88} 89 90void 91if_register_send(struct interface_info *info) 92{ 93 int sock, on = 1; 94 95 /* 96 * If we're using the bpf API for sending and receiving, we 97 * don't need to register this interface twice. 98 */ 99 info->wfdesc = info->rfdesc; 100 101 /* 102 * Use raw socket for unicast send. 103 */ 104 if ((sock = socket(AF_INET, SOCK_RAW, IPPROTO_UDP)) == -1) 105 error("socket(SOCK_RAW): %m"); 106 if (setsockopt(sock, IPPROTO_IP, IP_HDRINCL, &on, 107 sizeof(on)) == -1) 108 error("setsockopt(IP_HDRINCL): %m"); 109 info->ufdesc = sock; 110} 111 112/* 113 * Packet filter program... 114 * 115 * XXX: Changes to the filter program may require changes to the 116 * constant offsets used in if_register_send to patch the BPF program! 117 */ 118struct bpf_insn dhcp_bpf_filter[] = { 119 /* Make sure this is an IP packet... */ 120 BPF_STMT(BPF_LD + BPF_H + BPF_ABS, 12), 121 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, ETHERTYPE_IP, 0, 8), 122 123 /* Make sure it's a UDP packet... */ 124 BPF_STMT(BPF_LD + BPF_B + BPF_ABS, 23), 125 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 6), 126 127 /* Make sure this isn't a fragment... */ 128 BPF_STMT(BPF_LD + BPF_H + BPF_ABS, 20), 129 BPF_JUMP(BPF_JMP + BPF_JSET + BPF_K, 0x1fff, 4, 0), 130 131 /* Get the IP header length... */ 132 BPF_STMT(BPF_LDX + BPF_B + BPF_MSH, 14), 133 134 /* Make sure it's to the right port... */ 135 BPF_STMT(BPF_LD + BPF_H + BPF_IND, 16), 136 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 67, 0, 1), /* patch */ 137 138 /* If we passed all the tests, ask for the whole packet. */ 139 BPF_STMT(BPF_RET+BPF_K, (u_int)-1), 140 141 /* Otherwise, drop it. */ 142 BPF_STMT(BPF_RET+BPF_K, 0), 143}; 144 145int dhcp_bpf_filter_len = sizeof(dhcp_bpf_filter) / sizeof(struct bpf_insn); 146 147/* 148 * Packet write filter program: 149 * 'ip and udp and src port bootps and dst port (bootps or bootpc)' 150 */ 151struct bpf_insn dhcp_bpf_wfilter[] = { 152 BPF_STMT(BPF_LD + BPF_B + BPF_IND, 14), 153 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, (IPVERSION << 4) + 5, 0, 12), 154 155 /* Make sure this is an IP packet... */ 156 BPF_STMT(BPF_LD + BPF_H + BPF_ABS, 12), 157 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, ETHERTYPE_IP, 0, 10), 158 159 /* Make sure it's a UDP packet... */ 160 BPF_STMT(BPF_LD + BPF_B + BPF_ABS, 23), 161 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 8), 162 163 /* Make sure this isn't a fragment... */ 164 BPF_STMT(BPF_LD + BPF_H + BPF_ABS, 20), 165 BPF_JUMP(BPF_JMP + BPF_JSET + BPF_K, 0x1fff, 6, 0), /* patched */ 166 167 /* Get the IP header length... */ 168 BPF_STMT(BPF_LDX + BPF_B + BPF_MSH, 14), 169 170 /* Make sure it's from the right port... */ 171 BPF_STMT(BPF_LD + BPF_H + BPF_IND, 14), 172 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 68, 0, 3), 173 174 /* Make sure it is to the right ports ... */ 175 BPF_STMT(BPF_LD + BPF_H + BPF_IND, 16), 176 BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 67, 0, 1), 177 178 /* If we passed all the tests, ask for the whole packet. */ 179 BPF_STMT(BPF_RET+BPF_K, (u_int)-1), 180 181 /* Otherwise, drop it. */ 182 BPF_STMT(BPF_RET+BPF_K, 0), 183}; 184 185int dhcp_bpf_wfilter_len = sizeof(dhcp_bpf_wfilter) / sizeof(struct bpf_insn); 186 187void 188if_register_receive(struct interface_info *info) 189{ 190 struct bpf_version v; 191 struct bpf_program p; 192 int flag = 1, sz; 193 194 /* Open a BPF device and hang it on this interface... */ 195 info->rfdesc = if_register_bpf(info); 196 197 /* Make sure the BPF version is in range... */ 198 if (ioctl(info->rfdesc, BIOCVERSION, &v) < 0) 199 error("Can't get BPF version: %m"); 200 201 if (v.bv_major != BPF_MAJOR_VERSION || 202 v.bv_minor < BPF_MINOR_VERSION) 203 error("Kernel BPF version out of range - recompile dhcpd!"); 204 205 /* 206 * Set immediate mode so that reads return as soon as a packet 207 * comes in, rather than waiting for the input buffer to fill 208 * with packets. 209 */ 210 if (ioctl(info->rfdesc, BIOCIMMEDIATE, &flag) < 0) 211 error("Can't set immediate mode on bpf device: %m"); 212 213 /* Get the required BPF buffer length from the kernel. */ 214 if (ioctl(info->rfdesc, BIOCGBLEN, &sz) < 0) 215 error("Can't get bpf buffer length: %m"); 216 info->rbuf_max = sz; 217 info->rbuf = malloc(info->rbuf_max); 218 if (!info->rbuf) 219 error("Can't allocate %lu bytes for bpf input buffer.", 220 (unsigned long)info->rbuf_max); 221 info->rbuf_offset = 0; 222 info->rbuf_len = 0; 223 224 /* Set up the bpf filter program structure. */ 225 p.bf_len = dhcp_bpf_filter_len; 226 p.bf_insns = dhcp_bpf_filter; 227 228 /* Patch the server port into the BPF program... 229 * 230 * XXX: changes to filter program may require changes to the 231 * insn number(s) used below! 232 */ 233 dhcp_bpf_filter[8].k = LOCAL_PORT; 234 235 if (ioctl(info->rfdesc, BIOCSETF, &p) < 0) 236 error("Can't install packet filter program: %m"); 237 238 /* Set up the bpf write filter program structure. */ 239 p.bf_len = dhcp_bpf_wfilter_len; 240 p.bf_insns = dhcp_bpf_wfilter; 241 242 if (dhcp_bpf_wfilter[7].k == 0x1fff) 243 dhcp_bpf_wfilter[7].k = htons(IP_MF|IP_OFFMASK); 244 245 if (ioctl(info->rfdesc, BIOCSETWF, &p) < 0) 246 error("Can't install write filter program: %m"); 247 248 if (ioctl(info->rfdesc, BIOCLOCK, NULL) < 0) 249 error("Cannot lock bpf"); 250} 251 252ssize_t 253send_packet(struct interface_info *interface, struct dhcp_packet *raw, 254 size_t len, struct in_addr from, struct sockaddr_in *to) 255{ 256 unsigned char buf[256]; 257 struct iovec iov[2]; 258 struct msghdr msg; 259 int result, bufp = 0; 260 261 /* Assemble the headers... */ 262 if (to->sin_addr.s_addr == INADDR_BROADCAST) 263 assemble_hw_header(interface, buf, &bufp, NULL); 264 assemble_udp_ip_header(buf, &bufp, from.s_addr, 265 to->sin_addr.s_addr, to->sin_port, (unsigned char *)raw, len); 266 267 iov[0].iov_base = (char *)buf; 268 iov[0].iov_len = bufp; 269 iov[1].iov_base = (char *)raw; 270 iov[1].iov_len = len; 271 272 /* Fire it off */ 273 if (to->sin_addr.s_addr == INADDR_BROADCAST) 274 result = writev(interface->wfdesc, iov, 2); 275 else { 276 memset(&msg, 0, sizeof(msg)); 277 msg.msg_name = (struct sockaddr *)to; 278 msg.msg_namelen = sizeof(*to); 279 msg.msg_iov = iov; 280 msg.msg_iovlen = 2; 281 result = sendmsg(interface->ufdesc, &msg, 0); 282 } 283 284 if (result < 0) 285 warning("send_packet: %m"); 286 return (result); 287} 288 289ssize_t 290receive_packet(struct interface_info *interface, unsigned char *buf, 291 size_t len, struct sockaddr_in *from, struct hardware *hfrom) 292{ 293 int length = 0, offset = 0; 294 struct bpf_hdr hdr; 295 296 /* 297 * All this complexity is because BPF doesn't guarantee that 298 * only one packet will be returned at a time. We're getting 299 * what we deserve, though - this is a terrible abuse of the BPF 300 * interface. Sigh. 301 */ 302 303 /* Process packets until we get one we can return or until we've 304 * done a read and gotten nothing we can return... 305 */ 306 do { 307 /* If the buffer is empty, fill it. */ 308 if (interface->rbuf_offset >= interface->rbuf_len) { 309 length = read(interface->rfdesc, interface->rbuf, 310 interface->rbuf_max); 311 if (length <= 0) 312 return (length); 313 interface->rbuf_offset = 0; 314 interface->rbuf_len = length; 315 } 316 317 /* 318 * If there isn't room for a whole bpf header, something 319 * went wrong, but we'll ignore it and hope it goes 320 * away... XXX 321 */ 322 if (interface->rbuf_len - interface->rbuf_offset < 323 sizeof(hdr)) { 324 interface->rbuf_offset = interface->rbuf_len; 325 continue; 326 } 327 328 /* Copy out a bpf header... */ 329 memcpy(&hdr, &interface->rbuf[interface->rbuf_offset], 330 sizeof(hdr)); 331 332 /* 333 * If the bpf header plus data doesn't fit in what's 334 * left of the buffer, stick head in sand yet again... 335 */ 336 if (interface->rbuf_offset + hdr.bh_hdrlen + hdr.bh_caplen > 337 interface->rbuf_len) { 338 interface->rbuf_offset = interface->rbuf_len; 339 continue; 340 } 341 342 /* Skip over the BPF header... */ 343 interface->rbuf_offset += hdr.bh_hdrlen; 344 345 /* 346 * If the captured data wasn't the whole packet, or if 347 * the packet won't fit in the input buffer, all we can 348 * do is drop it. 349 */ 350 if (hdr.bh_caplen != hdr.bh_datalen) { 351 interface->rbuf_offset = 352 BPF_WORDALIGN(interface->rbuf_offset + 353 hdr.bh_caplen); 354 continue; 355 } 356 357 /* Decode the physical header... */ 358 offset = decode_hw_header(interface->rbuf, 359 interface->rbuf_offset, hfrom); 360 361 /* 362 * If a physical layer checksum failed (dunno of any 363 * physical layer that supports this, but WTH), skip 364 * this packet. 365 */ 366 if (offset < 0) { 367 interface->rbuf_offset = 368 BPF_WORDALIGN(interface->rbuf_offset + 369 hdr.bh_caplen); 370 continue; 371 } 372 interface->rbuf_offset += offset; 373 hdr.bh_caplen -= offset; 374 375 /* Decode the IP and UDP headers... */ 376 offset = decode_udp_ip_header(interface->rbuf, 377 interface->rbuf_offset, from, NULL, hdr.bh_caplen); 378 379 /* If the IP or UDP checksum was bad, skip the packet... */ 380 if (offset < 0) { 381 interface->rbuf_offset = 382 BPF_WORDALIGN(interface->rbuf_offset + 383 hdr.bh_caplen); 384 continue; 385 } 386 interface->rbuf_offset += offset; 387 hdr.bh_caplen -= offset; 388 389 /* 390 * If there's not enough room to stash the packet data, 391 * we have to skip it (this shouldn't happen in real 392 * life, though). 393 */ 394 if (hdr.bh_caplen > len) { 395 interface->rbuf_offset = 396 BPF_WORDALIGN(interface->rbuf_offset + 397 hdr.bh_caplen); 398 continue; 399 } 400 401 /* Copy out the data in the packet... */ 402 memcpy(buf, interface->rbuf + interface->rbuf_offset, 403 hdr.bh_caplen); 404 interface->rbuf_offset = 405 BPF_WORDALIGN(interface->rbuf_offset + 406 hdr.bh_caplen); 407 return (hdr.bh_caplen); 408 } while (!length); 409 return (0); 410} 411