Makefile.inc1 revision 99219 
1#
2# $FreeBSD: head/Makefile.inc1 99219 2002-07-01 17:51:43Z jmallett $
3#
4# Make command line options:
5#	-DMAKE_KERBEROS4 to build KerberosIV
6#	-DMAKE_KERBEROS5 to build Kerberos5
7#	-DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8#	-DNOCLEAN do not clean at all
9#	-DNOCRYPT will prevent building of crypt versions
10#	-DNOPROFILE do not build profiled libraries
11#	-DNOSECURE do not go into secure subdir
12#	-DNOGAMES do not go into games subdir
13#	-DNOSHARE do not go into share subdir
14#	-DNOINFO do not make or install info files
15#	-DNOLIBC_R do not build libc_r.
16#	-DNO_FORTRAN do not build g77 and related libraries.
17#	-DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18#	-DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19#	-DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20#	-DNO_PORTSUPDATE do not update ports in ${MAKE} update
21#	-DNO_DOCUPDATE do not update doc in ${MAKE} update
22#	LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23#	TARGET_ARCH="arch" to crossbuild world to a different arch
24
25#
26# The intended user-driven targets are:
27# buildworld  - rebuild *everything*, including glue to help do upgrades
28# installworld- install everything built by "buildworld"
29# update      - convenient way to update your source tree (eg: sup/cvs)
30# most        - build user commands, no libraries or include files
31# installmost - install user commands, no libraries or include files
32#
33# Standard targets (not defined here) are documented in the makefiles in
34# /usr/share/mk.  These include:
35#		obj depend all install clean cleandepend cleanobj
36
37# Put initial settings here.
38SUBDIR=
39
40# We must do share/info early so that installation of info `dir'
41# entries works correctly.  Do it first since it is less likely to
42# grow dependencies on include and lib than vice versa.
43.if exists(${.CURDIR}/share/info)
44SUBDIR+= share/info
45.endif
46
47.if exists(${.CURDIR}/include)
48SUBDIR+= include
49.endif
50.if exists(${.CURDIR}/lib)
51SUBDIR+= lib
52.endif
53
54.if exists(${.CURDIR}/bin)
55SUBDIR+= bin
56.endif
57.if exists(${.CURDIR}/games) && !defined(NOGAMES)
58SUBDIR+= games
59.endif
60.if exists(${.CURDIR}/gnu)
61SUBDIR+= gnu
62.endif
63.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
64    !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
65SUBDIR+= kerberosIV
66.endif
67.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
68    !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
69SUBDIR+= kerberos5
70.endif
71.if exists(${.CURDIR}/libexec)
72SUBDIR+= libexec
73.endif
74.if exists(${.CURDIR}/sbin)
75SUBDIR+= sbin
76.endif
77.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
78SUBDIR+= secure
79.endif
80.if exists(${.CURDIR}/share) && !defined(NOSHARE)
81SUBDIR+= share
82.endif
83.if exists(${.CURDIR}/sys)
84SUBDIR+= sys
85.endif
86.if exists(${.CURDIR}/usr.bin)
87SUBDIR+= usr.bin
88.endif
89.if exists(${.CURDIR}/usr.sbin)
90SUBDIR+= usr.sbin
91.endif
92
93# etc must be last for "distribute" to work
94.if exists(${.CURDIR}/etc)
95SUBDIR+= etc
96.endif
97
98# These are last, since it is nice to at least get the base system
99# rebuilt before you do them.
100.if defined(LOCAL_DIRS)
101.for _DIR in ${LOCAL_DIRS}
102.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
103SUBDIR+= ${_DIR}
104.endif
105.endfor
106.endif
107
108.if defined(SUBDIR_OVERRIDE)
109SUBDIR=		${SUBDIR_OVERRIDE}
110.endif
111
112.if defined(NOCLEANDIR)
113CLEANDIR=	clean cleandepend
114.else
115CLEANDIR=	cleandir
116.endif
117
118CVS?=		cvs
119SUP?=		/usr/local/bin/cvsup
120SUPFLAGS?=	-g -L 2 -P -
121.if defined(SUPHOST)
122SUPFLAGS+=	-h ${SUPHOST}
123.endif
124
125MAKEOBJDIRPREFIX?=	/usr/obj
126TARGET_ARCH?=	${MACHINE_ARCH}
127.if ${TARGET_ARCH} == ${MACHINE_ARCH}
128TARGET?=	${MACHINE}
129.else
130TARGET?=	${TARGET_ARCH}
131.endif
132.if make(buildworld)
133BUILD_ARCH!=	sysctl -n hw.machine_arch
134.if ${MACHINE_ARCH} != ${BUILD_ARCH}
135.error To cross-build, set TARGET_ARCH.
136.endif
137.endif
138.if ${MACHINE} == ${TARGET}
139OBJTREE=	${MAKEOBJDIRPREFIX}
140.else
141OBJTREE=	${MAKEOBJDIRPREFIX}/${TARGET}
142.endif
143WORLDTMP=	${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
144# /usr/games added for fortune which depend on strfile
145STRICTTMPPATH=	${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
146TMPPATH=	${STRICTTMPPATH}:${PATH}
147OBJFORMAT_PATH?=	/usr/libexec
148
149INSTALLTMP!=	/usr/bin/mktemp -d -u -t install
150
151#
152# Building a world goes through the following stages
153#
154# 1. bootstrap-tool stage [BMAKE]
155#	This stage is responsible for creating programs that
156#	are needed for backward compatibility reasons. They
157#	are not built as cross-tools.
158# 2. build-tool stage [TMAKE]
159#	This stage is responsible for creating the object
160#	tree and building any tools that are needed during
161#	the build process.
162# 3. cross-tool stage [XMAKE]
163#	This stage is responsible for creating any tools that
164#	are needed for cross-builds. A cross-compiler is one
165#	of them.
166# 4. world stage [WMAKE]
167#	This stage actually builds the world.
168# 5. install stage (optional) [IMAKE]
169#	This stage installs a previously built world.
170#
171
172# Common environment for world related stages
173CROSSENV=	MAKEOBJDIRPREFIX=${OBJTREE} \
174		MACHINE_ARCH=${TARGET_ARCH} \
175		MACHINE=${TARGET} \
176		OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
177		GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
178		GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
179		GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
180
181# bootstrap-tool stage
182BMAKEENV=	MAKEOBJDIRPREFIX=${WORLDTMP} \
183		DESTDIR= \
184		INSTALL="sh ${.CURDIR}/tools/install.sh"
185BMAKE=		${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
186		-DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
187		-DNO_WERROR
188
189# build-tool stage
190TMAKEENV=	MAKEOBJDIRPREFIX=${OBJTREE} \
191		DESTDIR= \
192		INSTALL="sh ${.CURDIR}/tools/install.sh"
193TMAKE=		${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
194
195# cross-tool stage
196XMAKE=		TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
197
198# world stage
199WMAKEENV=	${CROSSENV} \
200		DESTDIR=${WORLDTMP} \
201		INSTALL="sh ${.CURDIR}/tools/install.sh" \
202		PATH=${TMPPATH}
203WMAKE=		${WMAKEENV} ${MAKE} -f Makefile.inc1
204
205# install stage
206IMAKEENV=	${CROSSENV} \
207		PATH=${STRICTTMPPATH}:${INSTALLTMP}
208IMAKE=		${IMAKEENV} ${MAKE} -f Makefile.inc1
209
210# kernel stage
211KMAKEENV=	${WMAKEENV} \
212		OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
213
214USRDIRS=	usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
215		usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
216		usr/share/dict \
217		usr/share/groff_font/devX100 \
218		usr/share/groff_font/devX100-12 \
219		usr/share/groff_font/devX75 \
220		usr/share/groff_font/devX75-12 \
221		usr/share/groff_font/devascii \
222		usr/share/groff_font/devcp1047 \
223		usr/share/groff_font/devdvi \
224		usr/share/groff_font/devhtml \
225		usr/share/groff_font/devkoi8-r \
226		usr/share/groff_font/devlatin1 \
227		usr/share/groff_font/devlbp \
228		usr/share/groff_font/devlj4 \
229		usr/share/groff_font/devps \
230		usr/share/groff_font/devutf8 \
231		usr/share/tmac/mdoc usr/share/tmac/mm
232
233INCDIRS=	arpa dev fs g++/backward g++/bits g++/ext isc isofs libmilter \
234		objc openssl protocols readline rpc rpcsvc security ufs
235
236#
237# buildworld
238#
239# Attempt to rebuild the entire system, with reasonable chance of
240# success, regardless of how old your existing system is.
241#
242_worldtmp:
243	@echo
244	@echo "--------------------------------------------------------------"
245	@echo ">>> Rebuilding the temporary build tree"
246	@echo "--------------------------------------------------------------"
247.if !defined(NOCLEAN)
248	rm -rf ${WORLDTMP}
249.else
250	# XXX - These two can depend on any header file.
251	rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
252	rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
253.endif
254.for _dir in ${USRDIRS}
255	mkdir -p ${WORLDTMP}/${_dir}
256.endfor
257.for _dir in ${INCDIRS}
258	mkdir -p ${WORLDTMP}/usr/include/${_dir}
259.endfor
260	ln -sf ${.CURDIR}/sys ${WORLDTMP}
261_bootstrap-tools:
262	@echo
263	@echo "--------------------------------------------------------------"
264	@echo ">>> stage 1: bootstrap tools"
265	@echo "--------------------------------------------------------------"
266	cd ${.CURDIR}; ${BMAKE} bootstrap-tools
267_cleanobj:
268.if !defined(NOCLEAN)
269	@echo
270	@echo "--------------------------------------------------------------"
271	@echo ">>> stage 2: cleaning up the object tree"
272	@echo "--------------------------------------------------------------"
273	cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
274.endif
275_obj:
276	@echo
277	@echo "--------------------------------------------------------------"
278	@echo ">>> stage 2: rebuilding the object tree"
279	@echo "--------------------------------------------------------------"
280	cd ${.CURDIR}; ${WMAKE} par-obj
281_build-tools:
282	@echo
283	@echo "--------------------------------------------------------------"
284	@echo ">>> stage 2: build tools"
285	@echo "--------------------------------------------------------------"
286	cd ${.CURDIR}; ${TMAKE} build-tools
287_cross-tools:
288	@echo
289	@echo "--------------------------------------------------------------"
290	@echo ">>> stage 3: cross tools"
291	@echo "--------------------------------------------------------------"
292	cd ${.CURDIR}; ${XMAKE} cross-tools
293_includes:
294	@echo
295	@echo "--------------------------------------------------------------"
296	@echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
297	@echo "--------------------------------------------------------------"
298	cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
299_libraries:
300	@echo
301	@echo "--------------------------------------------------------------"
302	@echo ">>> stage 4: building libraries"
303	@echo "--------------------------------------------------------------"
304	cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
305_depend:
306	@echo
307	@echo "--------------------------------------------------------------"
308	@echo ">>> stage 4: make dependencies"
309	@echo "--------------------------------------------------------------"
310	cd ${.CURDIR}; ${WMAKE} par-depend
311everything:
312	@echo
313	@echo "--------------------------------------------------------------"
314	@echo ">>> stage 4: building everything.."
315	@echo "--------------------------------------------------------------"
316	cd ${.CURDIR}; ${WMAKE} all
317
318
319WMAKE_TGTS=
320.if !defined(SUBDIR_OVERRIDE)
321WMAKE_TGTS+=	_worldtmp _bootstrap-tools
322.endif
323WMAKE_TGTS+=	_cleanobj _obj _build-tools
324.if !defined(SUBDIR_OVERRIDE)
325WMAKE_TGTS+=	_cross-tools
326.endif
327WMAKE_TGTS+=	_includes _libraries _depend everything
328
329buildworld: ${WMAKE_TGTS}
330.ORDER: ${WMAKE_TGTS}
331
332#
333# installcheck
334#
335# Checks to be sure system is ready for installworld
336#
337installcheck:
338.if !defined(NO_SENDMAIL)
339	@if ! `grep -q '^smmsp:' /etc/passwd`; then \
340		echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
341		false; \
342	fi
343	@if ! `grep -q '^smmsp:' /etc/group`; then \
344		echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
345		false; \
346	fi
347.endif
348
349#
350# distributeworld
351#
352# Distributes everything compiled by a `buildworld'.
353#
354# installworld
355#
356# Installs everything compiled by a 'buildworld'.
357#
358distributeworld installworld: installcheck
359	mkdir -p ${INSTALLTMP}
360	for prog in [ awk cat chflags chmod chown date echo egrep find grep \
361	    ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
362	    test true uname wc zic; do \
363		cp `which $$prog` ${INSTALLTMP}; \
364	done
365	cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
366	rm -rf ${INSTALLTMP}
367
368#
369# reinstall
370#
371# If you have a build server, you can NFS mount the source and obj directories
372# and do a 'make reinstall' on the *client* to install new binaries from the
373# most recent server build.
374#
375reinstall:
376	@echo "--------------------------------------------------------------"
377	@echo ">>> Making hierarchy"
378	@echo "--------------------------------------------------------------"
379	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
380	@echo
381	@echo "--------------------------------------------------------------"
382	@echo ">>> Installing everything.."
383	@echo "--------------------------------------------------------------"
384	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
385.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
386	@echo
387	@echo "--------------------------------------------------------------"
388	@echo ">>> Rebuilding man page indices"
389	@echo "--------------------------------------------------------------"
390	cd ${.CURDIR}/share/man; ${MAKE} makedb
391.endif
392
393redistribute:
394	@echo "--------------------------------------------------------------"
395	@echo ">>> Distributing everything.."
396	@echo "--------------------------------------------------------------"
397	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
398
399#
400# buildkernel and installkernel
401#
402# Which kernels to build and/or install is specified by setting
403# KERNCONF. If not defined a GENERIC kernel is built/installed.
404# Only the existing (depending TARGET) config files are used
405# for building kernels and only the first of these is designated
406# as the one being installed.
407#
408# Note that we have to use TARGET instead of TARGET_ARCH when
409# we're in kernel-land. Since only TARGET_ARCH is (expected) to
410# be set to cross-build, we have to make sure TARGET is set
411# properly.
412
413.if !defined(KERNCONF) && defined(KERNEL)
414KERNCONF=	${KERNEL}
415KERNWARN=	yes
416.else
417KERNCONF?=	GENERIC
418.endif
419INSTKERNNAME?=	kernel
420
421KRNLSRCDIR=	${.CURDIR}/sys
422KRNLCONFDIR=	${KRNLSRCDIR}/${TARGET}/conf
423KRNLOBJDIR=	${OBJTREE}${KRNLSRCDIR}
424KERNCONFDIR?=	${KRNLCONFDIR}
425
426BUILDKERNELS=
427INSTALLKERNEL=
428.for _kernel in ${KERNCONF}
429.if exists(${KERNCONFDIR}/${_kernel})
430BUILDKERNELS+=	${_kernel}
431.if empty(INSTALLKERNEL)
432INSTALLKERNEL= ${_kernel}
433.endif
434.endif
435.endfor
436
437#
438# buildkernel
439#
440# Builds all kernels defined by BUILDKERNELS.
441#
442buildkernel:
443.if empty(BUILDKERNELS)
444	@echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
445	@false
446.endif
447.if defined(KERNWARN)
448	@echo "--------------------------------------------------------------"
449	@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
450	@echo "--------------------------------------------------------------"
451	@sleep 3
452.endif
453	@echo
454.for _kernel in ${BUILDKERNELS}
455	@echo "--------------------------------------------------------------"
456	@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
457	@echo "--------------------------------------------------------------"
458	@echo "===> ${_kernel}"
459	mkdir -p ${KRNLOBJDIR}
460.if !defined(NO_KERNELCONFIG)
461	cd ${KRNLCONFDIR}; \
462		PATH=${TMPPATH} \
463		    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
464			${KERNCONFDIR}/${_kernel}
465.endif
466.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
467	cd ${KRNLOBJDIR}/${_kernel}; \
468	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
469.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
470	cd ${KRNLOBJDIR}/${_kernel}; \
471	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
472.endif
473.endif
474	cd ${KRNLOBJDIR}/${_kernel}; \
475		MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
476		    ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
477.if !defined(NO_KERNELDEPEND)
478	cd ${KRNLOBJDIR}/${_kernel}; \
479	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
480.endif
481	cd ${KRNLOBJDIR}/${_kernel}; \
482	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
483	@echo "--------------------------------------------------------------"
484	@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
485	@echo "--------------------------------------------------------------"
486.endfor
487
488#
489# installkernel
490#
491# Install the kernel defined by INSTALLKERNEL
492#
493installkernel reinstallkernel:
494	cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
495	    ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
496
497#
498# update
499#
500# Update the source tree, by running sup and/or running cvs to update to the
501# latest copy.
502#
503update:
504.if defined(SUP_UPDATE)
505	@echo "--------------------------------------------------------------"
506	@echo ">>> Running ${SUP}"
507	@echo "--------------------------------------------------------------"
508.if defined(SUPFILE)
509	@${SUP} ${SUPFLAGS} ${SUPFILE}
510.endif
511.if defined(SUPFILE1)
512	@${SUP} ${SUPFLAGS} ${SUPFILE1}
513.endif
514.if defined(SUPFILE2)
515	@${SUP} ${SUPFLAGS} ${SUPFILE2}
516.endif
517.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
518	@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
519.endif
520.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
521	@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
522.endif
523.endif
524.if defined(CVS_UPDATE)
525	@echo "--------------------------------------------------------------"
526	@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
527	@echo "--------------------------------------------------------------"
528	cd ${.CURDIR}; ${CVS} -q update -A -P -d
529.endif
530
531#
532# most
533#
534# Build most of the user binaries on the existing system libs and includes.
535#
536most:
537	@echo "--------------------------------------------------------------"
538	@echo ">>> Building programs only"
539	@echo "--------------------------------------------------------------"
540.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
541	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ all
542.endfor
543
544#
545# installmost
546#
547# Install the binaries built by the 'most' target.  This does not include
548# libraries or include files.
549#
550installmost:
551	@echo "--------------------------------------------------------------"
552	@echo ">>> Installing programs only"
553	@echo "--------------------------------------------------------------"
554.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
555	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ install
556.endfor
557
558#
559# ------------------------------------------------------------------------
560#
561# From here onwards are utility targets used by the 'make world' and
562# related targets.  If your 'world' breaks, you may like to try to fix
563# the problem and manually run the following targets to attempt to
564# complete the build.  Beware, this is *not* guaranteed to work, you
565# need to have a pretty good grip on the current state of the system
566# to attempt to manually finish it.  If in doubt, 'make world' again.
567#
568
569#
570# bootstrap-tools: Build tools needed for compatibility
571#
572.if exists(${.CURDIR}/games) && !defined(NOGAMES)
573_strfile=	games/fortune/strfile
574.endif
575# This horrible kludge should be deleted in about 2 weeks, say July 9, 2002
576_cxx_version!=	${CXX} -v 2>&1 | awk '$$0 ~ /^gcc version/ {print $$3}'
577_cc_version!=  ${CC} -v 2>&1 | awk '$$0 ~ /^gcc version/ {print $$3}'
578.if ${CXX:T} != "c++" || \
579    (${_cxx_version} == ${_cc_version} && ${_cxx_version} != "3.1") || \
580    exists(/usr/lib/libstdc++.so.4)
581_cxx_consumers=	gnu/usr.bin/gperf gnu/usr.bin/groff
582.endif
583
584bootstrap-tools:
585.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \
586    usr.bin/makewhatis usr.bin/rpcgen usr.bin/uudecode \
587    usr.bin/xargs usr.bin/xinstall \
588    usr.sbin/config usr.sbin/kbdcontrol \
589    ${_cxx_consumers} gnu/usr.bin/texinfo
590	cd ${.CURDIR}/${_tool}; \
591		${MAKE} DIRPRFX=${_tool}/ obj; \
592		${MAKE} DIRPRFX=${_tool}/ depend; \
593		${MAKE} DIRPRFX=${_tool}/ all; \
594		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
595.endfor
596
597#
598# build-tools: Build special purpose build tools
599#
600.if exists(${.CURDIR}/games) && !defined(NOGAMES)
601_games=	games/adventure games/hack games/phantasia
602.endif
603
604.if exists(${.CURDIR}/share) && !defined(NOSHARE)
605_share=	share/syscons/scrnmaps
606.endif
607
608.if !defined(NO_FORTRAN)
609_fortran= gnu/usr.bin/cc/f771
610.endif
611
612.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
613    !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
614_libroken4= kerberosIV/lib/libroken
615.endif
616
617.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
618    !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
619_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
620    kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
621.endif
622
623build-tools:
624.for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
625    ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
626    usr.bin/awk usr.bin/file usr.sbin/sysinstall
627	cd ${.CURDIR}/${_tool}; ${MAKE} DIRPRFX=${_tool}/ build-tools
628.endfor
629
630#
631# cross-tools: Build cross-building tools
632#
633.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
634_elf2exe=	usr.sbin/elf2exe
635.endif
636
637.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
638_btxld=	usr.sbin/btxld
639.endif
640
641.if ${TARGET_ARCH} == "sparc64"
642_elf2aout=	usr.sbin/elf2aout
643.endif
644
645_xlint=	usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
646
647cross-tools:
648.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \
649    gnu/usr.bin/binutils usr.bin/objformat usr.sbin/crunch/crunchide \
650    gnu/usr.bin/cc ${_xlint}
651	cd ${.CURDIR}/${_tool}; \
652		${MAKE} DIRPRFX=${_tool}/ obj; \
653		${MAKE} DIRPRFX=${_tool}/ depend; \
654		${MAKE} DIRPRFX=${_tool}/ all; \
655		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
656.endfor
657
658#
659# hierarchy - ensure that all the needed directories are present
660#
661hierarchy:
662	cd ${.CURDIR}/etc;		${MAKE} distrib-dirs
663
664#
665# libraries - build all libraries, and install them under ${DESTDIR}.
666#
667# The list of libraries with dependents (${_prebuild_libs}) and their
668# interdependencies (__L) are built automatically by the
669# ${.CURDIR}/tools/make_libdeps.sh script.
670#
671libraries:
672	cd ${.CURDIR}; \
673	    ${MAKE} -f Makefile.inc1 _startup_libs; \
674	    ${MAKE} -f Makefile.inc1 _prebuild_libs; \
675	    ${MAKE} -f Makefile.inc1 _generic_libs;
676
677# These dependencies are not automatically generated:
678#
679# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
680# shared libraries for ELF.
681#
682_startup_libs=	gnu/lib/csu gnu/lib/libgcc
683.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-${OBJFORMAT})
684_startup_libs+=	lib/csu/${MACHINE_ARCH}-${OBJFORMAT}
685.else
686_startup_libs+=	lib/csu/${MACHINE_ARCH}
687.endif
688
689_prebuild_libs=
690
691_generic_libs=	gnu/lib
692
693.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
694_prebuild_libs+=	kerberos5/lib/libasn1
695_prebuild_libs+=	kerberos5/lib/libgssapi
696_prebuild_libs+=	kerberos5/lib/libkrb5
697_prebuild_libs+=	kerberos5/lib/libroken
698_generic_libs+=	kerberos5/lib
699.endif
700
701.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
702_prebuild_libs+=	kerberosIV/lib/libkrb
703kerberosIV/lib/libkrb__L: lib/libcrypt__L
704_generic_libs+=	kerberosIV/lib
705.endif
706
707_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \
708		lib/libncurses lib/libopie lib/libradius lib/librpcsvc \
709		lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
710		lib/libz lib/msun
711
712lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
713lib/libypclnt__L: lib/librpcsvc__L
714
715_generic_libs+=	lib
716
717.if !defined(NOCRYPT) && !defined(NOSECURE)
718.if !defined(NO_OPENSSL)
719_prebuild_libs+=	secure/lib/libcrypto secure/lib/libssl
720.if !defined(NO_OPENSSH)
721_prebuild_libs+=	secure/lib/libssh
722secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
723.endif
724.endif
725_generic_libs+=	secure/lib
726.endif
727
728_generic_libs+=	usr.bin/lex/lib
729
730.if ${MACHINE_ARCH} == "i386"
731_generic_libs+=	usr.sbin/pcvt/keycap
732.endif
733
734.for _lib in ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
735${_lib}__L: .PHONY
736.if exists(${.CURDIR}/${_lib})
737	cd ${.CURDIR}/${_lib}; \
738		${MAKE} DIRPRFX=${_lib}/ depend; \
739		${MAKE} DIRPRFX=${_lib}/ all; \
740		${MAKE} DIRPRFX=${_lib}/ install
741.endif
742.endfor
743
744_startup_libs: ${_startup_libs:S/$/__L/}
745_prebuild_libs: ${_prebuild_libs:S/$/__L/}
746_generic_libs: ${_generic_libs:S/$/__L/}
747
748.for __target in clean cleandepend cleandir depend includes obj
749.for entry in ${SUBDIR}
750${entry}.${__target}__D: .PHONY
751	@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
752		${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
753		edir=${entry}.${MACHINE_ARCH}; \
754		cd ${.CURDIR}/$${edir}; \
755	else \
756		${ECHODIR} "===> ${DIRPRFX}${entry}"; \
757		edir=${entry}; \
758		cd ${.CURDIR}/$${edir}; \
759	fi; \
760	${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
761.endfor
762par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
763.endfor
764
765.include <bsd.subdir.mk>
766