Makefile.inc1 revision 96669
1# 2# $FreeBSD: head/Makefile.inc1 96669 2002-05-15 16:29:45Z ru $ 3# 4# Make command line options: 5# -DMAKE_KERBEROS4 to build KerberosIV 6# -DMAKE_KERBEROS5 to build Kerberos5 7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 8# -DNOCLEAN do not clean at all 9# -DNOCRYPT will prevent building of crypt versions 10# -DNOPROFILE do not build profiled libraries 11# -DNOSECURE do not go into secure subdir 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PERL do not build perl5 and related libraries 21# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 22# -DNO_DOCUPDATE do not update doc in ${MAKE} update 23# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 24# TARGET_ARCH="arch" to crossbuild world to a different arch 25 26# 27# The intended user-driven targets are: 28# buildworld - rebuild *everything*, including glue to help do upgrades 29# installworld- install everything built by "buildworld" 30# update - convenient way to update your source tree (eg: sup/cvs) 31# most - build user commands, no libraries or include files 32# installmost - install user commands, no libraries or include files 33# 34# Standard targets (not defined here) are documented in the makefiles in 35# /usr/share/mk. These include: 36# obj depend all install clean cleandepend cleanobj 37 38# Put initial settings here. 39SUBDIR= 40 41# We must do share/info early so that installation of info `dir' 42# entries works correctly. Do it first since it is less likely to 43# grow dependencies on include and lib than vice versa. 44.if exists(${.CURDIR}/share/info) 45SUBDIR+= share/info 46.endif 47 48# We must do include and lib early so that the perl *.ph generation 49# works correctly as it uses the header files installed by this. 50.if exists(${.CURDIR}/include) 51SUBDIR+= include 52.endif 53.if exists(${.CURDIR}/lib) 54SUBDIR+= lib 55.endif 56 57.if exists(${.CURDIR}/bin) 58SUBDIR+= bin 59.endif 60.if exists(${.CURDIR}/games) && !defined(NOGAMES) 61SUBDIR+= games 62.endif 63.if exists(${.CURDIR}/gnu) 64SUBDIR+= gnu 65.endif 66.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \ 67 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4) 68SUBDIR+= kerberosIV 69.endif 70.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 71 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5) 72SUBDIR+= kerberos5 73.endif 74.if exists(${.CURDIR}/libexec) 75SUBDIR+= libexec 76.endif 77.if exists(${.CURDIR}/sbin) 78SUBDIR+= sbin 79.endif 80.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE) 81SUBDIR+= secure 82.endif 83.if exists(${.CURDIR}/share) && !defined(NOSHARE) 84SUBDIR+= share 85.endif 86.if exists(${.CURDIR}/sys) 87SUBDIR+= sys 88.endif 89.if exists(${.CURDIR}/usr.bin) 90SUBDIR+= usr.bin 91.endif 92.if exists(${.CURDIR}/usr.sbin) 93SUBDIR+= usr.sbin 94.endif 95 96# etc must be last for "distribute" to work 97.if exists(${.CURDIR}/etc) 98SUBDIR+= etc 99.endif 100 101# These are last, since it is nice to at least get the base system 102# rebuilt before you do them. 103.if defined(LOCAL_DIRS) 104.for _DIR in ${LOCAL_DIRS} 105.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 106SUBDIR+= ${_DIR} 107.endif 108.endfor 109.endif 110 111.if defined(SUBDIR_OVERRIDE) 112SUBDIR= ${SUBDIR_OVERRIDE} 113.endif 114 115.if defined(NOCLEANDIR) 116CLEANDIR= clean cleandepend 117.else 118CLEANDIR= cleandir 119.endif 120 121CVS?= cvs 122SUP?= /usr/local/bin/cvsup 123SUPFLAGS?= -g -L 2 -P - 124.if defined(SUPHOST) 125SUPFLAGS+= -h ${SUPHOST} 126.endif 127 128MAKEOBJDIRPREFIX?= /usr/obj 129TARGET_ARCH?= ${MACHINE_ARCH} 130.if ${TARGET_ARCH} == ${MACHINE_ARCH} 131TARGET?= ${MACHINE} 132.else 133TARGET?= ${TARGET_ARCH} 134.endif 135.if make(buildworld) 136BUILD_ARCH!= sysctl -n hw.machine_arch 137.if ${MACHINE_ARCH} != ${BUILD_ARCH} 138.error To cross-build, set TARGET_ARCH. 139.endif 140.endif 141.if ${MACHINE} == ${TARGET} 142OBJTREE= ${MAKEOBJDIRPREFIX} 143.else 144OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 145.endif 146WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 147# /usr/games added for fortune which depend on strfile 148STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 149TMPPATH= ${STRICTTMPPATH}:${PATH} 150OBJFORMAT_PATH?= /usr/libexec 151 152INSTALLTMP!= /usr/bin/mktemp -d -u -t install 153 154# 155# Building a world goes through the following stages 156# 157# 1. bootstrap-tool stage [BMAKE] 158# This stage is responsible for creating programs that 159# are needed for backward compatibility reasons. They 160# are not built as cross-tools. 161# 2. build-tool stage [TMAKE] 162# This stage is responsible for creating the object 163# tree and building any tools that are needed during 164# the build process. 165# 3. cross-tool stage [XMAKE] 166# This stage is responsible for creating any tools that 167# are needed for cross-builds. A cross-compiler is one 168# of them. 169# 4. world stage [WMAKE] 170# This stage actually builds the world. 171# 5. install stage (optional) [IMAKE] 172# This stage installs a previously built world. 173# 174 175# Common environment for world related stages 176CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 177 MACHINE_ARCH=${TARGET_ARCH} \ 178 MACHINE=${TARGET} \ 179 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \ 180 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.1 \ 181 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \ 182 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \ 183 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac 184 185# bootstrap-tool stage 186BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \ 187 DESTDIR= \ 188 INSTALL="sh ${.CURDIR}/tools/install.sh" 189BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 190 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 191 -DNO_WERROR 192 193# build-tool stage 194TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 195 DESTDIR= \ 196 INSTALL="sh ${.CURDIR}/tools/install.sh" 197TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING 198 199# cross-tool stage 200XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 201 202# world stage 203WMAKEENV= ${CROSSENV} \ 204 DESTDIR=${WORLDTMP} \ 205 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 206 PATH=${TMPPATH} 207WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 208 209# install stage 210IMAKEENV= ${CROSSENV} \ 211 PATH=${STRICTTMPPATH}:${INSTALLTMP} 212IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 213 214# kernel stage 215KMAKEENV= ${WMAKEENV} \ 216 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH} 217 218USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \ 219 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \ 220 usr/share/dict \ 221 usr/share/groff_font/devX100 \ 222 usr/share/groff_font/devX100-12 \ 223 usr/share/groff_font/devX75 \ 224 usr/share/groff_font/devX75-12 \ 225 usr/share/groff_font/devascii \ 226 usr/share/groff_font/devcp1047 \ 227 usr/share/groff_font/devdvi \ 228 usr/share/groff_font/devhtml \ 229 usr/share/groff_font/devkoi8-r \ 230 usr/share/groff_font/devlatin1 \ 231 usr/share/groff_font/devlbp \ 232 usr/share/groff_font/devlj4 \ 233 usr/share/groff_font/devps \ 234 usr/share/groff_font/devutf8 \ 235 usr/share/tmac/mdoc usr/share/tmac/mm 236 237INCDIRS= arpa dev fs g++/std isc isofs libmilter objc openssl \ 238 protocols readline rpc rpcsvc security ufs 239 240# 241# buildworld 242# 243# Attempt to rebuild the entire system, with reasonable chance of 244# success, regardless of how old your existing system is. 245# 246_worldtmp: 247 @echo 248 @echo "--------------------------------------------------------------" 249 @echo ">>> Rebuilding the temporary build tree" 250 @echo "--------------------------------------------------------------" 251.if !defined(NOCLEAN) 252 rm -rf ${WORLDTMP} 253.else 254 # XXX - These two can depend on any header file. 255 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 256 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 257.endif 258.for _dir in ${USRDIRS} 259 mkdir -p ${WORLDTMP}/${_dir} 260.endfor 261.for _dir in ${INCDIRS} 262 mkdir -p ${WORLDTMP}/usr/include/${_dir} 263.endfor 264 ln -sf ${.CURDIR}/sys ${WORLDTMP} 265_bootstrap-tools: 266 @echo 267 @echo "--------------------------------------------------------------" 268 @echo ">>> stage 1: bootstrap tools" 269 @echo "--------------------------------------------------------------" 270 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 271_cleanobj: 272.if !defined(NOCLEAN) 273 @echo 274 @echo "--------------------------------------------------------------" 275 @echo ">>> stage 2: cleaning up the object tree" 276 @echo "--------------------------------------------------------------" 277 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 278.endif 279_obj: 280 @echo 281 @echo "--------------------------------------------------------------" 282 @echo ">>> stage 2: rebuilding the object tree" 283 @echo "--------------------------------------------------------------" 284 cd ${.CURDIR}; ${WMAKE} par-obj 285_build-tools: 286 @echo 287 @echo "--------------------------------------------------------------" 288 @echo ">>> stage 2: build tools" 289 @echo "--------------------------------------------------------------" 290 cd ${.CURDIR}; ${TMAKE} build-tools 291_cross-tools: 292 @echo 293 @echo "--------------------------------------------------------------" 294 @echo ">>> stage 3: cross tools" 295 @echo "--------------------------------------------------------------" 296 cd ${.CURDIR}; ${XMAKE} cross-tools 297_includes: 298 @echo 299 @echo "--------------------------------------------------------------" 300 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 301 @echo "--------------------------------------------------------------" 302 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 303_libraries: 304 @echo 305 @echo "--------------------------------------------------------------" 306 @echo ">>> stage 4: building libraries" 307 @echo "--------------------------------------------------------------" 308 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 309_depend: 310 @echo 311 @echo "--------------------------------------------------------------" 312 @echo ">>> stage 4: make dependencies" 313 @echo "--------------------------------------------------------------" 314 cd ${.CURDIR}; ${WMAKE} par-depend 315everything: 316 @echo 317 @echo "--------------------------------------------------------------" 318 @echo ">>> stage 4: building everything.." 319 @echo "--------------------------------------------------------------" 320 cd ${.CURDIR}; ${WMAKE} all 321 322 323WMAKE_TGTS= 324.if !defined(SUBDIR_OVERRIDE) 325WMAKE_TGTS+= _worldtmp _bootstrap-tools 326.endif 327WMAKE_TGTS+= _cleanobj _obj _build-tools 328.if !defined(SUBDIR_OVERRIDE) 329WMAKE_TGTS+= _cross-tools 330.endif 331WMAKE_TGTS+= _includes _libraries _depend everything 332 333buildworld: ${WMAKE_TGTS} 334.ORDER: ${WMAKE_TGTS} 335 336# 337# installcheck 338# 339# Checks to be sure system is ready for installworld 340# 341installcheck: 342.if !defined(NO_SENDMAIL) 343 @if ! `grep -q '^smmsp:' /etc/passwd`; then \ 344 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 345 false; \ 346 fi 347 @if ! `grep -q '^smmsp:' /etc/group`; then \ 348 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 349 false; \ 350 fi 351.endif 352 353# 354# distributeworld 355# 356# Distributes everything compiled by a `buildworld'. 357# 358# installworld 359# 360# Installs everything compiled by a 'buildworld'. 361# 362distributeworld installworld: installcheck 363 mkdir -p ${INSTALLTMP} 364 for prog in [ awk cat chflags chmod chown date echo egrep find grep \ 365 ln make makewhatis mkdir mtree mv perl pwd_mkdb rm sed sh sysctl \ 366 test true uname wc zic; do \ 367 cp `which $$prog` ${INSTALLTMP}; \ 368 done 369 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 370 rm -rf ${INSTALLTMP} 371 372# 373# reinstall 374# 375# If you have a build server, you can NFS mount the source and obj directories 376# and do a 'make reinstall' on the *client* to install new binaries from the 377# most recent server build. 378# 379reinstall: 380 @echo "--------------------------------------------------------------" 381 @echo ">>> Making hierarchy" 382 @echo "--------------------------------------------------------------" 383 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 384 @echo 385 @echo "--------------------------------------------------------------" 386 @echo ">>> Installing everything.." 387 @echo "--------------------------------------------------------------" 388 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 389.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 390 @echo 391 @echo "--------------------------------------------------------------" 392 @echo ">>> Rebuilding man page indices" 393 @echo "--------------------------------------------------------------" 394 cd ${.CURDIR}/share/man; ${MAKE} makedb 395.endif 396 397redistribute: 398 @echo "--------------------------------------------------------------" 399 @echo ">>> Distributing everything.." 400 @echo "--------------------------------------------------------------" 401 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 402 403# 404# buildkernel and installkernel 405# 406# Which kernels to build and/or install is specified by setting 407# KERNCONF. If not defined a GENERIC kernel is built/installed. 408# Only the existing (depending TARGET) config files are used 409# for building kernels and only the first of these is designated 410# as the one being installed. 411# 412# Note that we have to use TARGET instead of TARGET_ARCH when 413# we're in kernel-land. Since only TARGET_ARCH is (expected) to 414# be set to cross-build, we have to make sure TARGET is set 415# properly. 416 417.if !defined(KERNCONF) && defined(KERNEL) 418KERNCONF= ${KERNEL} 419KERNWARN= yes 420.else 421KERNCONF?= GENERIC 422.endif 423INSTKERNNAME?= kernel 424 425KRNLSRCDIR= ${.CURDIR}/sys 426KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf 427KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 428KERNCONFDIR?= ${KRNLCONFDIR} 429 430BUILDKERNELS= 431INSTALLKERNEL= 432.for _kernel in ${KERNCONF} 433.if exists(${KERNCONFDIR}/${_kernel}) 434BUILDKERNELS+= ${_kernel} 435.if empty(INSTALLKERNEL) 436INSTALLKERNEL= ${_kernel} 437.endif 438.endif 439.endfor 440 441# 442# buildkernel 443# 444# Builds all kernels defined by BUILDKERNELS. 445# 446buildkernel: 447.if empty(BUILDKERNELS) 448 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})." 449 @false 450.endif 451.if defined(KERNWARN) 452 @echo "--------------------------------------------------------------" 453 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 454 @echo "--------------------------------------------------------------" 455 @sleep 3 456.endif 457 @echo 458.for _kernel in ${BUILDKERNELS} 459 @echo "--------------------------------------------------------------" 460 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 461 @echo "--------------------------------------------------------------" 462 @echo "===> ${_kernel}" 463 mkdir -p ${KRNLOBJDIR} 464.if !defined(NO_KERNELCONFIG) 465 cd ${KRNLCONFDIR}; \ 466 PATH=${TMPPATH} \ 467 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 468 ${KERNCONFDIR}/${_kernel} 469.endif 470.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 471 cd ${KRNLOBJDIR}/${_kernel}; \ 472 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean 473.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules) 474 cd ${KRNLOBJDIR}/${_kernel}; \ 475 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir 476.endif 477.endif 478 cd ${KRNLOBJDIR}/${_kernel}; \ 479 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \ 480 ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile 481.if !defined(NO_KERNELDEPEND) 482 cd ${KRNLOBJDIR}/${_kernel}; \ 483 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend 484.endif 485 cd ${KRNLOBJDIR}/${_kernel}; \ 486 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 487 @echo "--------------------------------------------------------------" 488 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 489 @echo "--------------------------------------------------------------" 490.endfor 491 492# 493# installkernel 494# 495# Install the kernel defined by INSTALLKERNEL 496# 497installkernel reinstallkernel: 498 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 499 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 500 501# 502# update 503# 504# Update the source tree, by running sup and/or running cvs to update to the 505# latest copy. 506# 507update: 508.if defined(SUP_UPDATE) 509 @echo "--------------------------------------------------------------" 510 @echo ">>> Running ${SUP}" 511 @echo "--------------------------------------------------------------" 512.if defined(SUPFILE) 513 @${SUP} ${SUPFLAGS} ${SUPFILE} 514.endif 515.if defined(SUPFILE1) 516 @${SUP} ${SUPFLAGS} ${SUPFILE1} 517.endif 518.if defined(SUPFILE2) 519 @${SUP} ${SUPFLAGS} ${SUPFILE2} 520.endif 521.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 522 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 523.endif 524.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 525 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 526.endif 527.endif 528.if defined(CVS_UPDATE) 529 @echo "--------------------------------------------------------------" 530 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 531 @echo "--------------------------------------------------------------" 532 cd ${.CURDIR}; ${CVS} -q update -A -P -d 533.endif 534 535# 536# most 537# 538# Build most of the user binaries on the existing system libs and includes. 539# 540most: 541 @echo "--------------------------------------------------------------" 542 @echo ">>> Building programs only" 543 @echo "--------------------------------------------------------------" 544.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 545 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 546.endfor 547 548# 549# installmost 550# 551# Install the binaries built by the 'most' target. This does not include 552# libraries or include files. 553# 554installmost: 555 @echo "--------------------------------------------------------------" 556 @echo ">>> Installing programs only" 557 @echo "--------------------------------------------------------------" 558.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 559 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 560.endfor 561 562# 563# ------------------------------------------------------------------------ 564# 565# From here onwards are utility targets used by the 'make world' and 566# related targets. If your 'world' breaks, you may like to try to fix 567# the problem and manually run the following targets to attempt to 568# complete the build. Beware, this is *not* guaranteed to work, you 569# need to have a pretty good grip on the current state of the system 570# to attempt to manually finish it. If in doubt, 'make world' again. 571# 572 573# 574# bootstrap-tools: Build tools needed for compatibility 575# 576.if exists(${.CURDIR}/games) && !defined(NOGAMES) 577_strfile= games/fortune/strfile 578.endif 579.if ${CXX} != "c++" 580_cxx_consumers= gnu/usr.bin/gperf gnu/usr.bin/groff 581.endif 582 583bootstrap-tools: 584.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \ 585 usr.bin/rpcgen usr.bin/xargs usr.bin/xinstall \ 586 usr.sbin/config usr.sbin/kbdcontrol \ 587 ${_cxx_consumers} gnu/usr.bin/texinfo 588 cd ${.CURDIR}/${_tool}; \ 589 ${MAKE} DIRPRFX=${_tool}/ obj; \ 590 ${MAKE} DIRPRFX=${_tool}/ depend; \ 591 ${MAKE} DIRPRFX=${_tool}/ all; \ 592 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 593.endfor 594 595# 596# build-tools: Build special purpose build tools 597# 598.if exists(${.CURDIR}/games) && !defined(NOGAMES) 599_games= games/adventure games/hack games/phantasia 600.endif 601 602.if exists(${.CURDIR}/share) && !defined(NOSHARE) 603_share= share/syscons/scrnmaps 604.endif 605 606.if !defined(NO_FORTRAN) 607_fortran= gnu/usr.bin/cc/f771 608.endif 609 610.if !defined(NOPERL) && !defined(NO_PERL) 611_perl= gnu/usr.bin/perl/miniperl 612.endif 613 614.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \ 615 !defined(NOCRYPT) && defined(MAKE_KERBEROS4) 616_libroken4= kerberosIV/lib/libroken 617.endif 618 619.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 620 !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 621_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 622 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 623.endif 624 625build-tools: 626.for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \ 627 ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \ 628 usr.bin/awk usr.bin/file usr.sbin/sysinstall 629 cd ${.CURDIR}/${_tool}; ${MAKE} DIRPRFX=${_tool}/ build-tools 630.endfor 631 632# 633# cross-tools: Build cross-building tools 634# 635.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha" 636_elf2exe= usr.sbin/elf2exe 637.endif 638 639.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 640_btxld= usr.sbin/btxld 641.endif 642 643_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint 644 645cross-tools: 646.for _tool in ${_btxld} ${_elf2exe} \ 647 gnu/usr.bin/binutils usr.bin/objformat usr.sbin/crunch/crunchide \ 648 gnu/usr.bin/cc ${_xlint} 649 cd ${.CURDIR}/${_tool}; \ 650 ${MAKE} DIRPRFX=${_tool}/ obj; \ 651 ${MAKE} DIRPRFX=${_tool}/ depend; \ 652 ${MAKE} DIRPRFX=${_tool}/ all; \ 653 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 654.endfor 655 656# 657# hierarchy - ensure that all the needed directories are present 658# 659hierarchy: 660 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 661 662# 663# libraries - build all libraries, and install them under ${DESTDIR}. 664# 665# The list of libraries with dependents (${_prebuild_libs}) and their 666# interdependencies (__L) are built automatically by the 667# ${.CURDIR}/tools/make_libdeps.sh script. 668# 669libraries: 670 cd ${.CURDIR}; \ 671 ${MAKE} -f Makefile.inc1 _startup_libs; \ 672 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 673 ${MAKE} -f Makefile.inc1 _generic_libs; 674 675# These dependencies are not automatically generated: 676# 677# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 678# shared libraries for ELF. 679# 680_startup_libs= gnu/lib/csu gnu/lib/libgcc 681.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-${OBJFORMAT}) 682_startup_libs+= lib/csu/${MACHINE_ARCH}-${OBJFORMAT} 683.else 684_startup_libs+= lib/csu/${MACHINE_ARCH} 685.endif 686 687_prebuild_libs= 688 689_generic_libs= gnu/lib 690 691.if !defined(NOPERL) && !defined(NO_PERL) 692_generic_libs+= gnu/usr.bin/perl/libperl 693.endif 694 695.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 696_prebuild_libs+= kerberos5/lib/libasn1 697_prebuild_libs+= kerberos5/lib/libgssapi 698_prebuild_libs+= kerberos5/lib/libkrb5 699_prebuild_libs+= kerberos5/lib/libroken 700_generic_libs+= kerberos5/lib 701.endif 702 703.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4) 704_prebuild_libs+= kerberosIV/lib/libkrb 705kerberosIV/lib/libkrb__L: lib/libcrypt__L 706_generic_libs+= kerberosIV/lib 707.endif 708 709_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \ 710 lib/libncurses lib/libopie lib/libradius lib/librpcsvc \ 711 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 712 lib/libz lib/msun 713 714lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 715lib/libypclnt__L: lib/librpcsvc__L 716 717_generic_libs+= lib 718 719.if !defined(NOCRYPT) && !defined(NOSECURE) 720_prebuild_libs+= secure/lib/libcrypto 721.if !defined(NO_OPENSSH) 722_prebuild_libs+= secure/lib/libssh 723secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 724.endif 725_generic_libs+= secure/lib 726.endif 727 728_generic_libs+= usr.bin/lex/lib 729 730.if ${MACHINE_ARCH} == "i386" 731_generic_libs+= usr.sbin/pcvt/keycap 732.endif 733 734.for _lib in ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 735${_lib}__L: .PHONY 736.if exists(${.CURDIR}/${_lib}) 737 cd ${.CURDIR}/${_lib}; \ 738 ${MAKE} DIRPRFX=${_lib}/ depend; \ 739 ${MAKE} DIRPRFX=${_lib}/ all; \ 740 ${MAKE} DIRPRFX=${_lib}/ install 741.endif 742.endfor 743 744_startup_libs: ${_startup_libs:S/$/__L/} 745_prebuild_libs: ${_prebuild_libs:S/$/__L/} 746_generic_libs: ${_generic_libs:S/$/__L/} 747 748.for __target in clean cleandepend cleandir depend includes obj 749.for entry in ${SUBDIR} 750${entry}.${__target}__D: .PHONY 751 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 752 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 753 edir=${entry}.${MACHINE_ARCH}; \ 754 cd ${.CURDIR}/$${edir}; \ 755 else \ 756 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 757 edir=${entry}; \ 758 cd ${.CURDIR}/$${edir}; \ 759 fi; \ 760 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 761.endfor 762par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 763.endfor 764 765.include <bsd.subdir.mk> 766