Makefile.inc1 revision 96568 
1#
2# $FreeBSD: head/Makefile.inc1 96568 2002-05-14 08:30:40Z ru $
3#
4# Make command line options:
5#	-DMAKE_KERBEROS4 to build KerberosIV
6#	-DMAKE_KERBEROS5 to build Kerberos5
7#	-DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8#	-DNOCLEAN do not clean at all
9#	-DNOCRYPT will prevent building of crypt versions
10#	-DNOPROFILE do not build profiled libraries
11#	-DNOSECURE do not go into secure subdir
12#	-DNOGAMES do not go into games subdir
13#	-DNOSHARE do not go into share subdir
14#	-DNOINFO do not make or install info files
15#	-DNOLIBC_R do not build libc_r.
16#	-DNO_FORTRAN do not build g77 and related libraries.
17#	-DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18#	-DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19#	-DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20#	-DNO_PERL do not build perl5 and related libraries
21#	-DNO_PORTSUPDATE do not update ports in ${MAKE} update
22#	-DNO_DOCUPDATE do not update doc in ${MAKE} update
23#	LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
24#	TARGET_ARCH="arch" to crossbuild world to a different arch
25
26#
27# The intended user-driven targets are:
28# buildworld  - rebuild *everything*, including glue to help do upgrades
29# installworld- install everything built by "buildworld"
30# update      - convenient way to update your source tree (eg: sup/cvs)
31# most        - build user commands, no libraries or include files
32# installmost - install user commands, no libraries or include files
33#
34# Standard targets (not defined here) are documented in the makefiles in
35# /usr/share/mk.  These include:
36#		obj depend all install clean cleandepend cleanobj
37
38# Put initial settings here.
39SUBDIR=
40
41# We must do share/info early so that installation of info `dir'
42# entries works correctly.  Do it first since it is less likely to
43# grow dependencies on include and lib than vice versa.
44.if exists(${.CURDIR}/share/info)
45SUBDIR+= share/info
46.endif
47
48# We must do include and lib early so that the perl *.ph generation
49# works correctly as it uses the header files installed by this.
50.if exists(${.CURDIR}/include)
51SUBDIR+= include
52.endif
53.if exists(${.CURDIR}/lib)
54SUBDIR+= lib
55.endif
56
57.if exists(${.CURDIR}/bin)
58SUBDIR+= bin
59.endif
60.if exists(${.CURDIR}/games) && !defined(NOGAMES)
61SUBDIR+= games
62.endif
63.if exists(${.CURDIR}/gnu)
64SUBDIR+= gnu
65.endif
66.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
67    !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
68SUBDIR+= kerberosIV
69.endif
70.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
71    !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
72SUBDIR+= kerberos5
73.endif
74.if exists(${.CURDIR}/libexec)
75SUBDIR+= libexec
76.endif
77.if exists(${.CURDIR}/sbin)
78SUBDIR+= sbin
79.endif
80.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
81SUBDIR+= secure
82.endif
83.if exists(${.CURDIR}/share) && !defined(NOSHARE)
84SUBDIR+= share
85.endif
86.if exists(${.CURDIR}/sys)
87SUBDIR+= sys
88.endif
89.if exists(${.CURDIR}/usr.bin)
90SUBDIR+= usr.bin
91.endif
92.if exists(${.CURDIR}/usr.sbin)
93SUBDIR+= usr.sbin
94.endif
95
96# etc must be last for "distribute" to work
97.if exists(${.CURDIR}/etc)
98SUBDIR+= etc
99.endif
100
101# These are last, since it is nice to at least get the base system
102# rebuilt before you do them.
103.if defined(LOCAL_DIRS)
104.for _DIR in ${LOCAL_DIRS}
105.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
106SUBDIR+= ${_DIR}
107.endif
108.endfor
109.endif
110
111.if defined(SUBDIR_OVERRIDE)
112SUBDIR=		${SUBDIR_OVERRIDE}
113.endif
114
115.if defined(NOCLEANDIR)
116CLEANDIR=	clean cleandepend
117.else
118CLEANDIR=	cleandir
119.endif
120
121CVS?=		cvs
122SUP?=		/usr/local/bin/cvsup
123SUPFLAGS?=	-g -L 2 -P -
124.if defined(SUPHOST)
125SUPFLAGS+=	-h ${SUPHOST}
126.endif
127
128MAKEOBJDIRPREFIX?=	/usr/obj
129TARGET_ARCH?=	${MACHINE_ARCH}
130.if ${TARGET_ARCH} == ${MACHINE_ARCH}
131TARGET?=	${MACHINE}
132.else
133TARGET?=	${TARGET_ARCH}
134.endif
135.if make(buildworld)
136BUILD_ARCH!=	sysctl -n hw.machine_arch
137.if ${MACHINE_ARCH} != ${BUILD_ARCH}
138.error To cross-build, set TARGET_ARCH.
139.endif
140.endif
141.if ${MACHINE} == ${TARGET}
142OBJTREE=	${MAKEOBJDIRPREFIX}
143.else
144OBJTREE=	${MAKEOBJDIRPREFIX}/${TARGET}
145.endif
146WORLDTMP=	${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
147# /usr/games added for fortune which depend on strfile
148STRICTTMPPATH=	${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
149TMPPATH=	${STRICTTMPPATH}:${PATH}
150OBJFORMAT_PATH?=	/usr/libexec
151
152INSTALLTMP!=	/usr/bin/mktemp -d -u -t install
153
154#
155# Building a world goes through the following stages
156#
157# 1. bootstrap-tool stage [BMAKE]
158#	This stage is responsible for creating programs that
159#	are needed for backward compatibility reasons. They
160#	are not built as cross-tools.
161# 2. build-tool stage [TMAKE]
162#	This stage is responsible for creating the object
163#	tree and building any tools that are needed during
164#	the build process.
165# 3. cross-tool stage [XMAKE]
166#	This stage is responsible for creating any tools that
167#	are needed for cross-builds. A cross-compiler is one
168#	of them.
169# 4. world stage [WMAKE]
170#	This stage actually builds the world.
171# 5. install stage (optional) [IMAKE]
172#	This stage installs a previously built world.
173#
174
175# Common environment for world related stages
176CROSSENV=	MAKEOBJDIRPREFIX=${OBJTREE} \
177		MACHINE_ARCH=${TARGET_ARCH} \
178		MACHINE=${TARGET} \
179		OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
180		PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.1 \
181		GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
182		GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
183		GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
184
185# bootstrap-tool stage
186BMAKEENV=	MAKEOBJDIRPREFIX=${WORLDTMP} \
187		DESTDIR= \
188		INSTALL="sh ${.CURDIR}/tools/install.sh"
189BMAKE=		${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
190		-DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
191		-DNO_WERROR
192
193# build-tool stage
194TMAKEENV=	MAKEOBJDIRPREFIX=${OBJTREE} \
195		DESTDIR= \
196		INSTALL="sh ${.CURDIR}/tools/install.sh"
197TMAKE=		${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
198
199# cross-tool stage
200XMAKE=		TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
201
202# world stage
203WMAKEENV=	${CROSSENV} \
204		DESTDIR=${WORLDTMP} \
205		INSTALL="sh ${.CURDIR}/tools/install.sh" \
206		PATH=${TMPPATH}
207WMAKE=		${WMAKEENV} ${MAKE} -f Makefile.inc1
208
209# install stage
210IMAKEENV=	${CROSSENV} \
211		PATH=${STRICTTMPPATH}:${INSTALLTMP}
212IMAKE=		${IMAKEENV} ${MAKE} -f Makefile.inc1
213
214# kernel stage
215KMAKEENV=	${WMAKEENV} \
216		OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
217
218USRDIRS=	usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
219		usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
220		usr/share/dict \
221		usr/share/groff_font/devX100 \
222		usr/share/groff_font/devX100-12 \
223		usr/share/groff_font/devX75 \
224		usr/share/groff_font/devX75-12 \
225		usr/share/groff_font/devascii \
226		usr/share/groff_font/devcp1047 \
227		usr/share/groff_font/devdvi \
228		usr/share/groff_font/devhtml \
229		usr/share/groff_font/devkoi8-r \
230		usr/share/groff_font/devlatin1 \
231		usr/share/groff_font/devlbp \
232		usr/share/groff_font/devlj4 \
233		usr/share/groff_font/devps \
234		usr/share/groff_font/devutf8 \
235		usr/share/tmac/mdoc usr/share/tmac/mm
236
237INCDIRS=	arpa dev fs g++/std isc isofs libmilter objc openssl \
238		protocols readline rpc rpcsvc security ufs
239
240#
241# buildworld
242#
243# Attempt to rebuild the entire system, with reasonable chance of
244# success, regardless of how old your existing system is.
245#
246_worldtmp:
247	@echo
248	@echo "--------------------------------------------------------------"
249	@echo ">>> Rebuilding the temporary build tree"
250	@echo "--------------------------------------------------------------"
251.if !defined(NOCLEAN)
252	rm -rf ${WORLDTMP}
253.else
254	# XXX - These two can depend on any header file.
255	rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
256	rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
257.endif
258.for _dir in ${USRDIRS}
259	mkdir -p ${WORLDTMP}/${_dir}
260.endfor
261.for _dir in ${INCDIRS}
262	mkdir -p ${WORLDTMP}/usr/include/${_dir}
263.endfor
264	ln -sf ${.CURDIR}/sys ${WORLDTMP}
265_bootstrap-tools:
266	@echo
267	@echo "--------------------------------------------------------------"
268	@echo ">>> stage 1: bootstrap tools"
269	@echo "--------------------------------------------------------------"
270	cd ${.CURDIR}; ${BMAKE} bootstrap-tools
271_cleanobj:
272.if !defined(NOCLEAN)
273	@echo
274	@echo "--------------------------------------------------------------"
275	@echo ">>> stage 2: cleaning up the object tree"
276	@echo "--------------------------------------------------------------"
277	cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
278.endif
279_obj:
280	@echo
281	@echo "--------------------------------------------------------------"
282	@echo ">>> stage 2: rebuilding the object tree"
283	@echo "--------------------------------------------------------------"
284	cd ${.CURDIR}; ${WMAKE} par-obj
285_build-tools:
286	@echo
287	@echo "--------------------------------------------------------------"
288	@echo ">>> stage 2: build tools"
289	@echo "--------------------------------------------------------------"
290	cd ${.CURDIR}; ${TMAKE} build-tools
291_cross-tools:
292	@echo
293	@echo "--------------------------------------------------------------"
294	@echo ">>> stage 3: cross tools"
295	@echo "--------------------------------------------------------------"
296	cd ${.CURDIR}; ${XMAKE} cross-tools
297_includes:
298	@echo
299	@echo "--------------------------------------------------------------"
300	@echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
301	@echo "--------------------------------------------------------------"
302	cd ${.CURDIR}; ${WMAKE} includes; ${WMAKE} SHARED=symlinks incsinstall
303_libraries:
304	@echo
305	@echo "--------------------------------------------------------------"
306	@echo ">>> stage 4: building libraries"
307	@echo "--------------------------------------------------------------"
308	cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
309_depend:
310	@echo
311	@echo "--------------------------------------------------------------"
312	@echo ">>> stage 4: make dependencies"
313	@echo "--------------------------------------------------------------"
314	cd ${.CURDIR}; ${WMAKE} par-depend
315everything:
316	@echo
317	@echo "--------------------------------------------------------------"
318	@echo ">>> stage 4: building everything.."
319	@echo "--------------------------------------------------------------"
320	cd ${.CURDIR}; ${WMAKE} all
321
322
323WMAKE_TGTS=
324.if !defined(SUBDIR_OVERRIDE)
325WMAKE_TGTS+=	_worldtmp _bootstrap-tools
326.endif
327WMAKE_TGTS+=	_cleanobj _obj _build-tools
328.if !defined(SUBDIR_OVERRIDE)
329WMAKE_TGTS+=	_cross-tools
330.endif
331WMAKE_TGTS+=	_includes _libraries _depend everything
332
333buildworld: ${WMAKE_TGTS}
334.ORDER: ${WMAKE_TGTS}
335
336#
337# installcheck
338#
339# Checks to be sure system is ready for installworld
340#
341installcheck:
342.if !defined(NO_SENDMAIL)
343	@if ! `grep -q '^smmsp:' /etc/passwd`; then \
344		echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
345		false; \
346	fi
347	@if ! `grep -q '^smmsp:' /etc/group`; then \
348		echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
349		false; \
350	fi
351.endif
352
353#
354# distributeworld
355#
356# Distributes everything compiled by a `buildworld'.
357#
358# installworld
359#
360# Installs everything compiled by a 'buildworld'.
361#
362distributeworld installworld: installcheck
363	mkdir -p ${INSTALLTMP}
364	for prog in [ awk cat chflags chmod chown date echo egrep find grep \
365	    ln make makewhatis mkdir mtree mv perl pwd_mkdb rm sed sh sysctl \
366	    test true uname wc zic; do \
367		cp `which $$prog` ${INSTALLTMP}; \
368	done
369	cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
370	rm -rf ${INSTALLTMP}
371
372#
373# reinstall
374#
375# If you have a build server, you can NFS mount the source and obj directories
376# and do a 'make reinstall' on the *client* to install new binaries from the
377# most recent server build.
378#
379reinstall:
380	@echo "--------------------------------------------------------------"
381	@echo ">>> Making hierarchy"
382	@echo "--------------------------------------------------------------"
383	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
384	@echo
385	@echo "--------------------------------------------------------------"
386	@echo ">>> Installing everything.."
387	@echo "--------------------------------------------------------------"
388	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
389.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
390	@echo
391	@echo "--------------------------------------------------------------"
392	@echo ">>> Rebuilding man page indices"
393	@echo "--------------------------------------------------------------"
394	cd ${.CURDIR}/share/man; ${MAKE} makedb
395.endif
396
397redistribute:
398	@echo "--------------------------------------------------------------"
399	@echo ">>> Distributing everything.."
400	@echo "--------------------------------------------------------------"
401	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
402
403#
404# buildkernel and installkernel
405#
406# Which kernels to build and/or install is specified by setting
407# KERNCONF. If not defined a GENERIC kernel is built/installed.
408# Only the existing (depending TARGET) config files are used
409# for building kernels and only the first of these is designated
410# as the one being installed.
411#
412# Note that we have to use TARGET instead of TARGET_ARCH when
413# we're in kernel-land. Since only TARGET_ARCH is (expected) to
414# be set to cross-build, we have to make sure TARGET is set
415# properly.
416
417.if !defined(KERNCONF) && defined(KERNEL)
418KERNCONF=	${KERNEL}
419KERNWARN=	yes
420.else
421KERNCONF?=	GENERIC
422.endif
423INSTKERNNAME?=	kernel
424
425KRNLSRCDIR=	${.CURDIR}/sys
426KRNLCONFDIR=	${KRNLSRCDIR}/${TARGET}/conf
427KRNLOBJDIR=	${OBJTREE}${KRNLSRCDIR}
428KERNCONFDIR?=	${KRNLCONFDIR}
429
430BUILDKERNELS=
431INSTALLKERNEL=
432.for _kernel in ${KERNCONF}
433.if exists(${KERNCONFDIR}/${_kernel})
434BUILDKERNELS+=	${_kernel}
435.if empty(INSTALLKERNEL)
436INSTALLKERNEL= ${_kernel}
437.endif
438.endif
439.endfor
440
441#
442# buildkernel
443#
444# Builds all kernels defined by BUILDKERNELS.
445#
446buildkernel:
447.if empty(BUILDKERNELS)
448	@echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
449	@false
450.endif
451.if defined(KERNWARN)
452	@echo "--------------------------------------------------------------"
453	@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
454	@echo "--------------------------------------------------------------"
455	@sleep 3
456.endif
457	@echo
458.for _kernel in ${BUILDKERNELS}
459	@echo "--------------------------------------------------------------"
460	@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
461	@echo "--------------------------------------------------------------"
462	@echo "===> ${_kernel}"
463	mkdir -p ${KRNLOBJDIR}
464.if !defined(NO_KERNELCONFIG)
465	cd ${KRNLCONFDIR}; \
466		PATH=${TMPPATH} \
467		    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
468			${KERNCONFDIR}/${_kernel}
469.endif
470.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
471	cd ${KRNLOBJDIR}/${_kernel}; \
472	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
473.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
474	cd ${KRNLOBJDIR}/${_kernel}; \
475	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
476.endif
477.endif
478	cd ${KRNLOBJDIR}/${_kernel}; \
479		MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
480		    ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
481.if !defined(NO_KERNELDEPEND)
482	cd ${KRNLOBJDIR}/${_kernel}; \
483	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
484.endif
485	cd ${KRNLOBJDIR}/${_kernel}; \
486	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
487	@echo "--------------------------------------------------------------"
488	@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
489	@echo "--------------------------------------------------------------"
490.endfor
491
492#
493# installkernel
494#
495# Install the kernel defined by INSTALLKERNEL
496#
497installkernel reinstallkernel:
498	cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
499	    ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
500
501#
502# update
503#
504# Update the source tree, by running sup and/or running cvs to update to the
505# latest copy.
506#
507update:
508.if defined(SUP_UPDATE)
509	@echo "--------------------------------------------------------------"
510	@echo ">>> Running ${SUP}"
511	@echo "--------------------------------------------------------------"
512.if defined(SUPFILE)
513	@${SUP} ${SUPFLAGS} ${SUPFILE}
514.endif
515.if defined(SUPFILE1)
516	@${SUP} ${SUPFLAGS} ${SUPFILE1}
517.endif
518.if defined(SUPFILE2)
519	@${SUP} ${SUPFLAGS} ${SUPFILE2}
520.endif
521.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
522	@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
523.endif
524.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
525	@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
526.endif
527.endif
528.if defined(CVS_UPDATE)
529	@echo "--------------------------------------------------------------"
530	@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
531	@echo "--------------------------------------------------------------"
532	cd ${.CURDIR}; ${CVS} -q update -A -P -d
533.endif
534
535#
536# most
537#
538# Build most of the user binaries on the existing system libs and includes.
539#
540most:
541	@echo "--------------------------------------------------------------"
542	@echo ">>> Building programs only"
543	@echo "--------------------------------------------------------------"
544.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
545	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ all
546.endfor
547
548#
549# installmost
550#
551# Install the binaries built by the 'most' target.  This does not include
552# libraries or include files.
553#
554installmost:
555	@echo "--------------------------------------------------------------"
556	@echo ">>> Installing programs only"
557	@echo "--------------------------------------------------------------"
558.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
559	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ install
560.endfor
561
562#
563# ------------------------------------------------------------------------
564#
565# From here onwards are utility targets used by the 'make world' and
566# related targets.  If your 'world' breaks, you may like to try to fix
567# the problem and manually run the following targets to attempt to
568# complete the build.  Beware, this is *not* guaranteed to work, you
569# need to have a pretty good grip on the current state of the system
570# to attempt to manually finish it.  If in doubt, 'make world' again.
571#
572
573#
574# bootstrap-tools: Build tools needed for compatibility
575#
576.if exists(${.CURDIR}/games) && !defined(NOGAMES)
577_strfile=	games/fortune/strfile
578.endif
579.if ${CXX} != "c++"
580_cxx_consumers=	gnu/usr.bin/gperf gnu/usr.bin/groff
581.endif
582
583bootstrap-tools:
584.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \
585    usr.bin/rpcgen usr.bin/xargs usr.bin/xinstall \
586    usr.sbin/config usr.sbin/kbdcontrol \
587    ${_cxx_consumers} gnu/usr.bin/texinfo
588	cd ${.CURDIR}/${_tool}; \
589		${MAKE} DIRPRFX=${_tool}/ obj; \
590		${MAKE} DIRPRFX=${_tool}/ depend; \
591		${MAKE} DIRPRFX=${_tool}/ all; \
592		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
593.endfor
594
595#
596# build-tools: Build special purpose build tools
597#
598.if exists(${.CURDIR}/games) && !defined(NOGAMES)
599_games=	games/adventure games/hack games/phantasia
600.endif
601
602.if exists(${.CURDIR}/share) && !defined(NOSHARE)
603_share=	share/syscons/scrnmaps
604.endif
605
606.if !defined(NO_FORTRAN)
607_fortran= gnu/usr.bin/cc/f771
608.endif
609
610.if !defined(NOPERL) && !defined(NO_PERL)
611_perl=	gnu/usr.bin/perl/miniperl
612.endif
613
614.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
615    !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
616_libroken4= kerberosIV/lib/libroken
617.endif
618
619.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
620    !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
621_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
622    kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
623.endif
624
625build-tools:
626.for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
627    ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
628    usr.bin/awk usr.bin/file usr.sbin/sysinstall
629	cd ${.CURDIR}/${_tool}; ${MAKE} DIRPRFX=${_tool}/ build-tools
630.endfor
631
632#
633# cross-tools: Build cross-building tools
634#
635.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
636_elf2exe=	usr.sbin/elf2exe
637.endif
638
639.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
640_btxld=	usr.sbin/btxld
641.endif
642
643_xlint=	usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
644
645cross-tools:
646.for _tool in ${_btxld} ${_elf2exe} \
647    gnu/usr.bin/binutils usr.bin/objformat usr.sbin/crunch/crunchide \
648    gnu/usr.bin/cc ${_xlint}
649	cd ${.CURDIR}/${_tool}; \
650		${MAKE} DIRPRFX=${_tool}/ obj; \
651		${MAKE} DIRPRFX=${_tool}/ depend; \
652		${MAKE} DIRPRFX=${_tool}/ all; \
653		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
654.endfor
655
656#
657# hierarchy - ensure that all the needed directories are present
658#
659hierarchy:
660	cd ${.CURDIR}/etc;		${MAKE} distrib-dirs
661
662.if ${CXX} == "c++"
663NO_CXX=	yes
664.endif
665
666#
667# libraries - build all libraries, and install them under ${DESTDIR}.
668#
669# The list of libraries with dependents (${_prebuild_libs}) and their
670# interdependencies (__L) are built automatically by the
671# ${.CURDIR}/tools/make_libdeps.sh script.
672#
673libraries:
674	cd ${.CURDIR}; \
675	    ${MAKE} -f Makefile.inc1 _startup_libs; \
676	    ${MAKE} -f Makefile.inc1 _prebuild_libs; \
677	    ${MAKE} -f Makefile.inc1 _generic_libs;
678
679# These dependencies are not automatically generated:
680#
681# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
682# shared libraries for ELF.
683#
684_startup_libs=	gnu/lib/csu gnu/lib/libgcc
685.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-${OBJFORMAT})
686_startup_libs+=	lib/csu/${MACHINE_ARCH}-${OBJFORMAT}
687.else
688_startup_libs+=	lib/csu/${MACHINE_ARCH}
689.endif
690
691_prebuild_libs=
692
693_generic_libs=	gnu/lib
694
695.if !defined(NOPERL) && !defined(NO_PERL)
696_generic_libs+=	gnu/usr.bin/perl/libperl
697.endif
698
699.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
700_prebuild_libs+=	kerberos5/lib/libasn1
701_prebuild_libs+=	kerberos5/lib/libgssapi
702_prebuild_libs+=	kerberos5/lib/libkrb5
703_prebuild_libs+=	kerberos5/lib/libroken
704_generic_libs+=	kerberos5/lib
705.endif
706
707.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
708_prebuild_libs+=	kerberosIV/lib/libkrb
709kerberosIV/lib/libkrb__L: lib/libcrypt__L
710_generic_libs+=	kerberosIV/lib
711.endif
712
713_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \
714		lib/libncurses lib/libopie lib/libradius lib/librpcsvc \
715		lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
716		lib/libz lib/msun
717
718lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
719lib/libypclnt__L: lib/librpcsvc__L
720
721_generic_libs+=	lib
722
723.if !defined(NOCRYPT) && !defined(NOSECURE)
724_prebuild_libs+=	secure/lib/libcrypto
725.if !defined(NO_OPENSSH)
726_prebuild_libs+=	secure/lib/libssh
727secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
728.endif
729_generic_libs+=	secure/lib
730.endif
731
732_generic_libs+=	usr.bin/lex/lib
733
734.if ${MACHINE_ARCH} == "i386"
735_generic_libs+=	usr.sbin/pcvt/keycap
736.endif
737
738.for _lib in ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
739${_lib}__L: .PHONY
740.if exists(${.CURDIR}/${_lib})
741	cd ${.CURDIR}/${_lib}; \
742		${MAKE} DIRPRFX=${_lib}/ depend; \
743		${MAKE} DIRPRFX=${_lib}/ all; \
744		${MAKE} DIRPRFX=${_lib}/ install
745.endif
746.endfor
747
748_startup_libs: ${_startup_libs:S/$/__L/}
749_prebuild_libs: ${_prebuild_libs:S/$/__L/}
750_generic_libs: ${_generic_libs:S/$/__L/}
751
752.for __target in clean cleandepend cleandir depend obj
753.for entry in ${SUBDIR}
754${entry}.${__target}__D: .PHONY
755	@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
756		${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
757		edir=${entry}.${MACHINE_ARCH}; \
758		cd ${.CURDIR}/$${edir}; \
759	else \
760		${ECHODIR} "===> ${DIRPRFX}${entry}"; \
761		edir=${entry}; \
762		cd ${.CURDIR}/$${edir}; \
763	fi; \
764	${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
765.endfor
766par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
767.endfor
768
769.include <bsd.subdir.mk>
770