Makefile.inc1 revision 148389 
1#
2# $FreeBSD: head/Makefile.inc1 148389 2005-07-25 14:44:11Z des $
3#
4# Make command line options:
5#	-DNO_DYNAMICROOT do not link /bin and /sbin dynamically
6#	-DNO_KERBEROS Do not build Heimdal (Kerberos 5)
7#	-DNO_RESCUE do not build rescue binaries
8#	-DNO_CLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
9#	-DNO_CLEAN do not clean at all
10#	-DNO_CRYPT will prevent building of crypt versions
11#	-DNO_MAN do not build the manual pages
12#	-DNO_NLS do not build Native Language Support files
13#	-DNO_PROFILE do not build profiled libraries
14#	-DNO_GAMES do not go into games subdir
15#	-DNO_SHARE do not go into share subdir
16#	-DNO_INFO do not make or install info files
17#	-DNO_LIBC_R do not build libc_r.
18#	-DNO_FORTRAN do not build g77 and related libraries.
19#	-DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
20#	-DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
21#	-DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
22#	-DNO_PORTSUPDATE do not update ports in ${MAKE} update
23#	-DNO_DOCUPDATE do not update doc in ${MAKE} update
24#	LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
25#	TARGET_ARCH="arch" to crossbuild world to a different arch
26
27#
28# The intended user-driven targets are:
29# buildworld  - rebuild *everything*, including glue to help do upgrades
30# installworld- install everything built by "buildworld"
31# update      - convenient way to update your source tree (eg: cvsup/cvs)
32#
33# Standard targets (not defined here) are documented in the makefiles in
34# /usr/share/mk.  These include:
35#		obj depend all install clean cleandepend cleanobj
36
37# We must do share/info early so that installation of info `dir'
38# entries works correctly.  Do it first since it is less likely to
39# grow dependencies on include and lib than vice versa.
40#
41# We must do lib and libexec before bin, because if installworld
42# installs a new /bin/sh, the 'make' command will *immediately*
43# use that new version.  And the new (dynamically-linked) /bin/sh
44# will expect to find appropriate libraries in /lib and /libexec.
45#
46# We must do etc last for install/distribute to work.
47#
48SUBDIR=	share/info include lib libexec bin
49.if !defined(NO_GAMES)
50SUBDIR+=games
51.endif
52SUBDIR+=gnu
53.if !defined(NO_KERBEROS) && !defined(NO_CRYPT) && !defined(NO_OPENSSL)
54SUBDIR+=kerberos5
55.endif
56.if !defined(NO_RESCUE)
57SUBDIR+=rescue
58.endif
59SUBDIR+=sbin
60.if !defined(NO_CRYPT)
61SUBDIR+=secure
62.endif
63.if !defined(NO_SHARE)
64SUBDIR+=share
65.endif
66SUBDIR+=sys usr.bin usr.sbin etc
67
68# These are last, since it is nice to at least get the base system
69# rebuilt before you do them.
70.for _DIR in ${LOCAL_DIRS}
71.if exists(${.CURDIR}/${_DIR}/Makefile)
72SUBDIR+= ${_DIR}
73.endif
74.endfor
75
76.if defined(SUBDIR_OVERRIDE)
77SUBDIR=		${SUBDIR_OVERRIDE}
78.endif
79
80.if defined(NOCLEAN)
81NO_CLEAN=	${NOCLEAN}
82.endif
83.if defined(NO_CLEANDIR)
84CLEANDIR=	clean cleandepend
85.else
86CLEANDIR=	cleandir
87.endif
88
89CVS?=		cvs
90CVSFLAGS?=	-A -P -d -I!
91SUP?=		/usr/local/bin/cvsup
92SUPFLAGS?=	-g -L 2 -P -
93.if defined(SUPHOST)
94SUPFLAGS+=	-h ${SUPHOST}
95.endif
96
97MAKEOBJDIRPREFIX?=	/usr/obj
98.if !defined(OSRELDATE)
99.if exists(/usr/include/osreldate.h)
100OSRELDATE!=	awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
101		/usr/include/osreldate.h
102.else
103OSRELDATE=	0
104.endif
105.endif
106TARGET_ARCH?=	${MACHINE_ARCH}
107.if ${TARGET_ARCH} == ${MACHINE_ARCH}
108TARGET?=	${MACHINE}
109TARGET_CPUTYPE?=${CPUTYPE}
110.else
111TARGET?=	${TARGET_ARCH}
112TARGET_CPUTYPE?=
113.endif
114.if !empty(TARGET_CPUTYPE)
115_TARGET_CPUTYPE=${TARGET_CPUTYPE}
116.else
117_TARGET_CPUTYPE=dummy
118.endif
119_CPUTYPE!=	MAKEFLAGS= CPUTYPE=${_TARGET_CPUTYPE} ${MAKE} \
120		-f /dev/null -m ${.CURDIR}/share/mk -V CPUTYPE
121.if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
122.error CPUTYPE global should be set with ?=.
123.endif
124.if make(buildworld)
125BUILD_ARCH!=	sysctl -n hw.machine_arch
126.if ${MACHINE_ARCH} != ${BUILD_ARCH}
127.error To cross-build, set TARGET_ARCH.
128.endif
129.endif
130.if ${MACHINE} == ${TARGET} && !defined(CROSS_BUILD_TESTING)
131OBJTREE=	${MAKEOBJDIRPREFIX}
132.else
133OBJTREE=	${MAKEOBJDIRPREFIX}/${TARGET}
134.endif
135WORLDTMP=	${OBJTREE}${.CURDIR}/tmp
136# /usr/games added for fortune which depend on strfile
137BPATH=		${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
138XPATH=		${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
139STRICTTMPPATH=	${BPATH}:${XPATH}
140TMPPATH=	${STRICTTMPPATH}:${PATH}
141
142INSTALLTMP!=	/usr/bin/mktemp -d -u -t install
143
144#
145# Building a world goes through the following stages
146#
147# 1. legacy stage [BMAKE]
148#	This stage is responsible for creating compatibility
149#	shims that are needed by the bootstrap-tools,
150#	build-tools and cross-tools stages.
151# 1. bootstrap-tools stage [BMAKE]
152#	This stage is responsible for creating programs that
153#	are needed for backward compatibility reasons. They
154#	are not built as cross-tools.
155# 2. build-tools stage [TMAKE]
156#	This stage is responsible for creating the object
157#	tree and building any tools that are needed during
158#	the build process.
159# 3. cross-tools stage [XMAKE]
160#	This stage is responsible for creating any tools that
161#	are needed for cross-builds. A cross-compiler is one
162#	of them.
163# 4. world stage [WMAKE]
164#	This stage actually builds the world.
165# 5. install stage (optional) [IMAKE]
166#	This stage installs a previously built world.
167#
168
169BOOTSTRAPPING?=	0
170
171# Common environment for world related stages
172CROSSENV=	MAKEOBJDIRPREFIX=${OBJTREE} \
173		MACHINE_ARCH=${TARGET_ARCH} \
174		MACHINE=${TARGET} \
175		CPUTYPE=${TARGET_CPUTYPE} \
176		GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
177		GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
178		GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
179
180# bootstrap-tools stage
181BMAKEENV=	INSTALL="sh ${.CURDIR}/tools/install.sh" \
182		PATH=${BPATH}:${PATH} \
183		WORLDTMP=${WORLDTMP} \
184		MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
185BMAKE=		MAKEOBJDIRPREFIX=${WORLDTMP} \
186		${BMAKEENV} ${MAKE} -f Makefile.inc1 \
187		DESTDIR= \
188		BOOTSTRAPPING=${OSRELDATE} \
189		-DNO_HTML -DNO_INFO -DNO_LINT -DNO_MAN -DNO_NLS -DNO_PIC \
190		-DNO_PROFILE -DNO_SHARED -DNO_CPU_CFLAGS -DNO_WARNS
191
192# build-tools stage
193TMAKE=		MAKEOBJDIRPREFIX=${OBJTREE} \
194		${BMAKEENV} ${MAKE} -f Makefile.inc1 \
195		DESTDIR= \
196		BOOTSTRAPPING=${OSRELDATE} -DNO_LINT -DNO_CPU_CFLAGS -DNO_WARNS
197
198# cross-tools stage
199XMAKE=		TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
200
201# world stage
202WMAKEENV=	${CROSSENV} \
203		_SHLIBDIRPREFIX=${WORLDTMP} \
204		INSTALL="sh ${.CURDIR}/tools/install.sh" \
205		PATH=${TMPPATH}
206WMAKE=		${WMAKEENV} ${MAKE} -f Makefile.inc1 DESTDIR=${WORLDTMP}
207
208.if ${TARGET_ARCH} == "amd64"
209# 32 bit world
210LIB32TMP=	${OBJTREE}${.CURDIR}/lib32
211
212LIB32PREFLAGS=	-m32 -march=athlon-xp -msse2 -mfancy-math-387 -DCOMPAT_32BIT
213LIB32POSTFLAGS=	-I${LIB32TMP}/usr/include \
214		-L${LIB32TMP}/usr/lib32 \
215		-B${LIB32TMP}/usr/lib32
216LIB32CC=	${LIB32PREFLAGS} \
217		${LIB32POSTFLAGS}
218LIB32CXX=	${LIB32PREFLAGS} -I${LIB32TMP}/usr/include/c++/3.4 \
219		${LIB32POSTFLAGS}
220LIB32OBJC=	${LIB32PREFLAGS} -I${LIB32TMP}/usr/include/objc \
221		${LIB32POSTFLAGS}
222
223# Yes, the flags are redundant.
224LIB32MAKEENV=	MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \
225		_SHLIBDIRPREFIX=${LIB32TMP} \
226		MACHINE=i386 \
227		MACHINE_ARCH=i386 \
228		INSTALL="sh ${.CURDIR}/tools/install.sh" \
229		PATH=${TMPPATH} \
230		CC="${CC} ${LIB32CC}" \
231		CXX="${CXX} ${LIB32CXX}" \
232		OBJC="${OBJC} ${LIB32OBJC}" \
233		LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32" \
234		AS="${AS} --32" \
235		LIBDIR=/usr/lib32 \
236		SHLIBDIR=/usr/lib32
237
238LIB32MAKE=	${LIB32MAKEENV} ${MAKE} -DNO_CPU_CFLAGS -DCOMPAT_32BIT \
239		-DNO_BIND -DNO_MAN -DNO_NLS -DNO_INFO -DNO_HTML \
240		CC="${CC} ${LIB32CC}" \
241		CXX="${CXX} ${LIB32CXX}" \
242		OBJC="${OBJC} ${LIB32OBJC}" \
243		LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32" \
244		AS="${AS} --32" \
245		LIBDIR=/usr/lib32 \
246		SHLIBDIR=/usr/lib32
247.endif
248
249# install stage
250.if empty(.MAKEFLAGS:M-n)
251IMAKEENV=	${CROSSENV} \
252		PATH=${STRICTTMPPATH}:${INSTALLTMP}
253.else
254IMAKEENV=	${CROSSENV} \
255		PATH=${TMPPATH}:${INSTALLTMP}
256.endif
257IMAKE=		${IMAKEENV} ${MAKE} -f Makefile.inc1
258
259# kernel stage
260KMAKEENV=	${WMAKEENV}
261
262#
263# buildworld
264#
265# Attempt to rebuild the entire system, with reasonable chance of
266# success, regardless of how old your existing system is.
267#
268_worldtmp:
269.if ${.CURDIR:C/[^,]//g} != ""
270#	The m4 build of sendmail files doesn't like it if ',' is used
271#	anywhere in the path of it's files.
272	@echo
273	@echo "*** Error: path to source tree contains a comma ','"
274	@echo
275	false
276.endif
277	@echo
278	@echo "--------------------------------------------------------------"
279	@echo ">>> Rebuilding the temporary build tree"
280	@echo "--------------------------------------------------------------"
281.if !defined(NO_CLEAN)
282	rm -rf ${WORLDTMP}
283.else
284	rm -rf ${WORLDTMP}/legacy/usr/include
285	# XXX - These two can depend on any header file.
286	rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
287	rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
288.endif
289.for _dir in \
290    usr/bin usr/games usr/include/c++/3.4 usr/include/sys usr/lib \
291    usr/libexec usr/sbin usr/share/dict \
292    usr/share/groff_font/devX100 \
293    usr/share/groff_font/devX100-12 \
294    usr/share/groff_font/devX75 \
295    usr/share/groff_font/devX75-12 \
296    usr/share/groff_font/devascii \
297    usr/share/groff_font/devcp1047 \
298    usr/share/groff_font/devdvi \
299    usr/share/groff_font/devhtml \
300    usr/share/groff_font/devkoi8-r \
301    usr/share/groff_font/devlatin1 \
302    usr/share/groff_font/devlbp \
303    usr/share/groff_font/devlj4 \
304    usr/share/groff_font/devps \
305    usr/share/groff_font/devutf8 \
306    usr/share/tmac/mdoc usr/share/tmac/mm
307	mkdir -p ${WORLDTMP}/legacy/${_dir}
308.endfor
309.for _dir in \
310    lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
311    usr/libexec usr/sbin usr/share/misc \
312    usr/share/snmp/defs usr/share/snmp/mibs
313	mkdir -p ${WORLDTMP}/${_dir}
314.endfor
315	mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
316	    -p ${WORLDTMP}/usr/include >/dev/null
317	ln -sf ${.CURDIR}/sys ${WORLDTMP}
318.if defined(WITH_BIND_LIBS) && !defined(NO_BIND)
319	mtree -deU -f ${.CURDIR}/etc/mtree/BIND.include.dist \
320	    -p ${WORLDTMP}/usr/include >/dev/null
321.endif
322_legacy:
323	@echo
324	@echo "--------------------------------------------------------------"
325	@echo ">>> stage 1.1: legacy release compatibility shims"
326	@echo "--------------------------------------------------------------"
327	${_+_}cd ${.CURDIR}; ${BMAKE} legacy
328_bootstrap-tools:
329	@echo
330	@echo "--------------------------------------------------------------"
331	@echo ">>> stage 1.2: bootstrap tools"
332	@echo "--------------------------------------------------------------"
333	${_+_}cd ${.CURDIR}; ${BMAKE} bootstrap-tools
334_cleanobj:
335.if !defined(NO_CLEAN)
336	@echo
337	@echo "--------------------------------------------------------------"
338	@echo ">>> stage 2.1: cleaning up the object tree"
339	@echo "--------------------------------------------------------------"
340	${_+_}cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
341.endif
342_obj:
343	@echo
344	@echo "--------------------------------------------------------------"
345	@echo ">>> stage 2.2: rebuilding the object tree"
346	@echo "--------------------------------------------------------------"
347	${_+_}cd ${.CURDIR}; ${WMAKE} par-obj
348_build-tools:
349	@echo
350	@echo "--------------------------------------------------------------"
351	@echo ">>> stage 2.3: build tools"
352	@echo "--------------------------------------------------------------"
353	${_+_}cd ${.CURDIR}; ${TMAKE} build-tools
354_cross-tools:
355	@echo
356	@echo "--------------------------------------------------------------"
357	@echo ">>> stage 3: cross tools"
358	@echo "--------------------------------------------------------------"
359	${_+_}cd ${.CURDIR}; ${XMAKE} cross-tools
360_includes:
361	@echo
362	@echo "--------------------------------------------------------------"
363	@echo ">>> stage 4.1: building includes"
364	@echo "--------------------------------------------------------------"
365	${_+_}cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
366_libraries:
367	@echo
368	@echo "--------------------------------------------------------------"
369	@echo ">>> stage 4.2: building libraries"
370	@echo "--------------------------------------------------------------"
371	${_+_}cd ${.CURDIR}; \
372	    ${WMAKE} -DNO_FSCHG -DNO_HTML -DNO_INFO -DNO_LINT -DNO_MAN \
373	    -DNO_NLS -DNO_PROFILE libraries
374_depend:
375	@echo
376	@echo "--------------------------------------------------------------"
377	@echo ">>> stage 4.3: make dependencies"
378	@echo "--------------------------------------------------------------"
379	${_+_}cd ${.CURDIR}; ${WMAKE} par-depend
380everything:
381	@echo
382	@echo "--------------------------------------------------------------"
383	@echo ">>> stage 4.4: building everything"
384	@echo "--------------------------------------------------------------"
385	${_+_}cd ${.CURDIR}; ${WMAKE} par-all
386.if ${TARGET_ARCH} == "amd64"
387build32:
388	@echo
389	@echo "--------------------------------------------------------------"
390	@echo ">>> stage 5.1: building 32 bit shim libraries"
391	@echo "--------------------------------------------------------------"
392.for _dir in \
393    lib lib32 usr/bin usr/include usr/lib32 usr/libdata/ldscripts \
394    usr/libexec usr/sbin usr/share/misc \
395    usr/share/snmp/defs usr/share/snmp/mibs
396	mkdir -p ${LIB32TMP}/${_dir}
397.endfor
398	mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
399	    -p ${LIB32TMP}/usr/include >/dev/null
400	ln -sf ${.CURDIR}/sys ${WORLDTMP}
401.if !defined(NO_KERBEROS) && !defined(NO_CRYPT) && !defined(NO_OPENSSL)
402.for _t in obj depend all
403	cd ${.CURDIR}/kerberos5/tools; \
404	    MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= ${_t}
405.endfor
406.endif
407.for _t in obj includes
408	cd ${.CURDIR}/include; \
409	    ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t}
410	cd ${.CURDIR}/lib; \
411	    ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t}
412	cd ${.CURDIR}/gnu/lib; \
413	    ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t}
414.if !defined(NO_CRYPT)
415	cd ${.CURDIR}/secure/lib; \
416	    ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t}
417.endif
418.if !defined(NO_KERBEROS) && !defined(NO_CRYPT) && !defined(NO_OPENSSL)
419	cd ${.CURDIR}/kerberos5/lib; \
420	    ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t}
421.endif
422.endfor
423.for _dir in usr.sbin/pcvt/keycap usr.bin/lex/lib
424	cd ${.CURDIR}/${_dir}; \
425	    ${LIB32MAKE} DESTDIR=${LIB32TMP} obj
426.endfor
427.for _dir in lib/libncurses lib/libmagic
428	cd ${.CURDIR}/${_dir}; \
429	    MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= build-tools
430.endfor
431	cd ${.CURDIR}; \
432	    ${LIB32MAKE} -f Makefile.inc1 DESTDIR=${LIB32TMP} libraries 
433.for _t in obj depend all
434	cd ${.CURDIR}/libexec/rtld-elf; \
435	    PROG=ld-elf32.so.1 ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t}
436.endfor
437
438distribute32 install32:
439.if make(distribute32)
440	mkdir -p ${DISTDIR}/${DISTRIBUTION}/usr/lib32	# XXX add to mtree
441.else
442	mkdir -p ${DESTDIR}/usr/lib32			# XXX add to mtree
443.endif
444	cd ${.CURDIR}/lib; ${LIB32MAKE} ${.TARGET:S/32$//}
445	cd ${.CURDIR}/gnu/lib; ${LIB32MAKE} ${.TARGET:S/32$//}
446.if !defined(NO_CRYPT)
447	cd ${.CURDIR}/secure/lib; ${LIB32MAKE} ${.TARGET:S/32$//}
448.endif
449	cd ${.CURDIR}/libexec/rtld-elf; PROG=ld-elf32.so.1 ${LIB32MAKE} ${.TARGET:S/32$//}
450.endif
451
452
453WMAKE_TGTS=
454.if !defined(SUBDIR_OVERRIDE)
455WMAKE_TGTS+=	_worldtmp _legacy _bootstrap-tools
456.endif
457WMAKE_TGTS+=	_cleanobj _obj _build-tools
458.if !defined(SUBDIR_OVERRIDE)
459WMAKE_TGTS+=	_cross-tools
460.endif
461WMAKE_TGTS+=	_includes _libraries _depend everything
462.if ${TARGET_ARCH} == "amd64" && !defined(NO_LIB32)
463WMAKE_TGTS+=	build32
464.endif
465
466buildworld: ${WMAKE_TGTS}
467.ORDER: ${WMAKE_TGTS}
468
469buildenv:
470	@echo Entering world for ${TARGET_ARCH}:${TARGET}
471	@cd ${.CURDIR} && env ${WMAKEENV} sh || true
472
473TOOLCHAIN_TGTS=	${WMAKE_TGTS:N_depend:Neverything:Nbuild32}
474toolchain: ${TOOLCHAIN_TGTS}
475kernel-toolchain: ${TOOLCHAIN_TGTS:N_includes:N_libraries}
476
477#
478# Use this to add checks to installworld/installkernel targets.
479#
480SPECIAL_INSTALLCHECKS=
481
482#
483# installcheck
484#
485# Checks to be sure system is ready for installworld
486#
487CHECK_UIDS=
488CHECK_GIDS=
489.if !defined(NO_SENDMAIL)
490CHECK_UIDS+=	smmsp
491CHECK_GIDS+=	smmsp
492.endif
493.if !defined(NO_PF)
494CHECK_UIDS+=	proxy
495CHECK_GIDS+=	proxy authpf
496.endif
497installcheck: ${SPECIAL_INSTALLCHECKS}
498.for uid in ${CHECK_UIDS}
499	@if ! `id -u ${uid} >/dev/null 2>&1`; then \
500		echo "ERROR: Required ${uid} user is missing, see /usr/src/UPDATING."; \
501		false; \
502	fi
503.endfor
504.for gid in ${CHECK_GIDS}
505	@if ! `find / -prune -group ${gid} >/dev/null 2>&1`; then \
506		echo "ERROR: Required ${gid} group is missing, see /usr/src/UPDATING."; \
507		false; \
508	fi
509.endfor
510
511#
512# distributeworld
513#
514# Distributes everything compiled by a `buildworld'.
515#
516# installworld
517#
518# Installs everything compiled by a 'buildworld'.
519#
520distributeworld installworld: installcheck
521	mkdir -p ${INSTALLTMP}
522	for prog in [ awk cap_mkdb cat chflags chmod chown \
523	    date echo egrep find grep install-info \
524	    ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
525	    test true uname wc zic; do \
526		cp `which $$prog` ${INSTALLTMP}; \
527	done
528	${_+_}cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
529	rm -rf ${INSTALLTMP}
530
531#
532# reinstall
533#
534# If you have a build server, you can NFS mount the source and obj directories
535# and do a 'make reinstall' on the *client* to install new binaries from the
536# most recent server build.
537#
538reinstall: ${SPECIAL_INSTALLCHECKS}
539	@echo "--------------------------------------------------------------"
540	@echo ">>> Making hierarchy"
541	@echo "--------------------------------------------------------------"
542	${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
543	@echo
544	@echo "--------------------------------------------------------------"
545	@echo ">>> Installing everything"
546	@echo "--------------------------------------------------------------"
547	${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
548.if ${TARGET_ARCH} == "amd64" && !defined(NO_LIB32)
549	${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install32
550.endif
551
552redistribute:
553	@echo "--------------------------------------------------------------"
554	@echo ">>> Distributing everything"
555	@echo "--------------------------------------------------------------"
556	${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
557.if ${TARGET_ARCH} == "amd64" && !defined(NO_LIB32)
558	${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute32 DISTRIBUTION=lib32
559.endif
560
561distrib-dirs distribution:
562	cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} ${.TARGET}
563
564#
565# buildkernel and installkernel
566#
567# Which kernels to build and/or install is specified by setting
568# KERNCONF. If not defined a GENERIC kernel is built/installed.
569# Only the existing (depending TARGET) config files are used
570# for building kernels and only the first of these is designated
571# as the one being installed.
572#
573# Note that we have to use TARGET instead of TARGET_ARCH when
574# we're in kernel-land. Since only TARGET_ARCH is (expected) to
575# be set to cross-build, we have to make sure TARGET is set
576# properly.
577
578.if !defined(KERNCONF) && defined(KERNEL)
579KERNCONF=	${KERNEL}
580KERNWARN=
581.else
582KERNCONF?=	GENERIC
583.endif
584INSTKERNNAME?=	kernel
585
586KERNSRCDIR?=	${.CURDIR}/sys
587KRNLCONFDIR=	${KERNSRCDIR}/${TARGET}/conf
588KRNLOBJDIR=	${OBJTREE}${KERNSRCDIR}
589KERNCONFDIR?=	${KRNLCONFDIR}
590
591BUILDKERNELS=
592INSTALLKERNEL=
593.for _kernel in ${KERNCONF}
594.if exists(${KERNCONFDIR}/${_kernel})
595BUILDKERNELS+=	${_kernel}
596.if empty(INSTALLKERNEL)
597INSTALLKERNEL= ${_kernel}
598.endif
599.endif
600.endfor
601
602#
603# buildkernel
604#
605# Builds all kernels defined by BUILDKERNELS.
606#
607buildkernel:
608.if empty(BUILDKERNELS)
609	@echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; \
610	false
611.endif
612.if defined(KERNWARN)
613	@echo "--------------------------------------------------------------"
614	@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
615	@echo "--------------------------------------------------------------"
616	@sleep 3
617.endif
618	@echo
619.for _kernel in ${BUILDKERNELS}
620	@echo "--------------------------------------------------------------"
621	@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
622	@echo "--------------------------------------------------------------"
623	@echo "===> ${_kernel}"
624	mkdir -p ${KRNLOBJDIR}
625.if !defined(NO_KERNELCONFIG)
626	@echo
627	@echo "--------------------------------------------------------------"
628	@echo ">>> stage 1: configuring the kernel"
629	@echo "--------------------------------------------------------------"
630	cd ${KRNLCONFDIR}; \
631		PATH=${TMPPATH} \
632		    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
633			${KERNCONFDIR}/${_kernel}
634.endif
635.if !defined(NO_CLEAN) && !defined(NO_KERNELCLEAN)
636	@echo
637	@echo "--------------------------------------------------------------"
638	@echo ">>> stage 2.1: cleaning up the object tree"
639	@echo "--------------------------------------------------------------"
640	cd ${KRNLOBJDIR}/${_kernel}; \
641	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR}
642.endif
643	@echo
644	@echo "--------------------------------------------------------------"
645	@echo ">>> stage 2.2: rebuilding the object tree"
646	@echo "--------------------------------------------------------------"
647	cd ${KRNLOBJDIR}/${_kernel}; \
648	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj
649	@echo
650	@echo "--------------------------------------------------------------"
651	@echo ">>> stage 2.3: build tools"
652	@echo "--------------------------------------------------------------"
653	cd ${KRNLOBJDIR}/${_kernel}; \
654	    MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
655	    ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
656# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
657.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
658.for target in obj depend all
659	cd ${KERNSRCDIR}/modules/aic7xxx/aicasm; \
660	    MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
661	    ${MAKE} -DNO_CPU_CFLAGS ${target}
662.endfor
663.endif
664.if !defined(NO_KERNELDEPEND)
665	@echo
666	@echo "--------------------------------------------------------------"
667	@echo ">>> stage 3.1: making dependencies"
668	@echo "--------------------------------------------------------------"
669	cd ${KRNLOBJDIR}/${_kernel}; \
670	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
671.endif
672	@echo
673	@echo "--------------------------------------------------------------"
674	@echo ">>> stage 3.2: building everything"
675	@echo "--------------------------------------------------------------"
676	cd ${KRNLOBJDIR}/${_kernel}; \
677	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
678	@echo "--------------------------------------------------------------"
679	@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
680	@echo "--------------------------------------------------------------"
681.endfor
682
683#
684# installkernel, etc.
685#
686# Install the kernel defined by INSTALLKERNEL
687#
688installkernel installkernel.debug \
689reinstallkernel reinstallkernel.debug: ${SPECIAL_INSTALLCHECKS}
690.if empty(INSTALLKERNEL)
691	@echo "ERROR: No kernel \"${KERNCONF}\" to install."; \
692	false
693.endif
694	@echo "--------------------------------------------------------------"
695	@echo ">>> Making hierarchy"
696	@echo "--------------------------------------------------------------"
697	cd ${.CURDIR}; \
698	    ${CROSSENV} PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 hierarchy
699	@echo
700	@echo "--------------------------------------------------------------"
701	@echo ">>> Installing kernel"
702	@echo "--------------------------------------------------------------"
703	cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
704	    ${CROSSENV} PATH=${TMPPATH} \
705	    ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}
706
707#
708# update
709#
710# Update the source tree, by running cvsup and/or running cvs to update to the
711# latest copy.
712#
713update:
714.if defined(SUP_UPDATE)
715	@echo "--------------------------------------------------------------"
716	@echo ">>> Running ${SUP}"
717	@echo "--------------------------------------------------------------"
718.if defined(SUPFILE)
719	@${SUP} ${SUPFLAGS} ${SUPFILE}
720.endif
721.if defined(SUPFILE1)
722	@${SUP} ${SUPFLAGS} ${SUPFILE1}
723.endif
724.if defined(SUPFILE2)
725	@${SUP} ${SUPFLAGS} ${SUPFILE2}
726.endif
727.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
728	@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
729.endif
730.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
731	@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
732.endif
733.endif
734.if defined(CVS_UPDATE)
735	@echo "--------------------------------------------------------------"
736	@echo ">>> Updating ${.CURDIR} from CVS repository" ${CVSROOT}
737	@echo "--------------------------------------------------------------"
738	cd ${.CURDIR}; ${CVS} -R -q update ${CVSFLAGS}
739.endif
740
741#
742# ------------------------------------------------------------------------
743#
744# From here onwards are utility targets used by the 'make world' and
745# related targets.  If your 'world' breaks, you may like to try to fix
746# the problem and manually run the following targets to attempt to
747# complete the build.  Beware, this is *not* guaranteed to work, you
748# need to have a pretty good grip on the current state of the system
749# to attempt to manually finish it.  If in doubt, 'make world' again.
750#
751
752#
753# legacy: Build compatibility shims for the next three targets
754#
755legacy:
756.if ${BOOTSTRAPPING} < 503000
757	@echo "ERROR: Source upgrades from versions prior to 5.3 not supported."; \
758	false
759.endif
760.for _tool in tools/build
761	${_+_}@${ECHODIR} "===> ${_tool} (obj,includes,depend,all,install)"; \
762	    cd ${.CURDIR}/${_tool}; \
763	    ${MAKE} DIRPRFX=${_tool}/ obj; \
764	    ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
765	    ${MAKE} DIRPRFX=${_tool}/ depend; \
766	    ${MAKE} DIRPRFX=${_tool}/ all; \
767	    ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
768.endfor
769
770#
771# bootstrap-tools: Build tools needed for compatibility
772#
773.if !defined(NO_GAMES)
774_strfile=	games/fortune/strfile
775.endif
776
777.if !defined(NO_CXX)
778_gperf=		gnu/usr.bin/gperf
779.if ${BOOTSTRAPPING} < 500113
780_groff=		gnu/usr.bin/groff
781.else
782_groff=		gnu/usr.bin/groff/tmac
783.endif
784.endif
785
786.if ${BOOTSTRAPPING} < 600029
787_texinfo=	gnu/usr.bin/texinfo
788.endif
789
790.if ${BOOTSTRAPPING} < 600015
791_cap_mkdb=	usr.bin/cap_mkdb
792.endif
793
794.if ${BOOTSTRAPPING} < 600018
795_colldef=	usr.bin/colldef
796.endif
797
798.if ${BOOTSTRAPPING} < 600017
799_gencat=	usr.bin/gencat
800.endif
801
802.if ${BOOTSTRAPPING} < 600016
803_mklocale=	usr.bin/mklocale
804.endif
805
806.if !defined(NO_RESCUE) && \
807    ${BOOTSTRAPPING} < 600008
808_crunchgen=	usr.sbin/crunch/crunchgen
809.endif
810
811.if ${BOOTSTRAPPING} < 600020
812_pwd_mkdb=	usr.sbin/pwd_mkdb
813.endif
814
815bootstrap-tools:
816.for _tool in \
817    ${_strfile} \
818    ${_gperf} \
819    ${_groff} \
820    ${_texinfo} \
821    ${_cap_mkdb} \
822    ${_colldef} \
823    ${_gencat} \
824    usr.bin/lorder \
825    usr.bin/makewhatis \
826    ${_mklocale} \
827    usr.bin/rpcgen \
828    usr.bin/xinstall \
829    usr.sbin/config \
830    ${_crunchgen} \
831    ${_pwd_mkdb}
832	${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
833		cd ${.CURDIR}/${_tool}; \
834		${MAKE} DIRPRFX=${_tool}/ obj; \
835		${MAKE} DIRPRFX=${_tool}/ depend; \
836		${MAKE} DIRPRFX=${_tool}/ all; \
837		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
838.endfor
839
840#
841# build-tools: Build special purpose build tools
842#
843.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
844_aicasm= sys/modules/aic7xxx/aicasm
845.endif
846
847.if !defined(NO_SHARE)
848_share=	share/syscons/scrnmaps
849.endif
850
851.if !defined(NO_KERBEROS) && !defined(NO_CRYPT) && !defined(NO_OPENSSL)
852_kerberos5_tools= kerberos5/tools
853.endif
854
855.if !defined(NO_RESCUE)
856_rescue= rescue/rescue
857.endif
858
859build-tools:
860.for _tool in \
861    bin/csh \
862    bin/sh \
863    ${_rescue} \
864    lib/libncurses \
865    ${_share} \
866    ${_aicasm} \
867    usr.bin/awk \
868    lib/libmagic \
869    usr.sbin/sysinstall
870	${_+_}@${ECHODIR} "===> ${_tool} (obj,build-tools)"; \
871		cd ${.CURDIR}/${_tool}; \
872		${MAKE} DIRPRFX=${_tool}/ obj; \
873		${MAKE} DIRPRFX=${_tool}/ build-tools
874.endfor
875.for _tool in \
876    gnu/usr.bin/cc/cc_tools \
877    ${_kerberos5_tools}
878	${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all)"; \
879		cd ${.CURDIR}/${_tool}; \
880		${MAKE} DIRPRFX=${_tool}/ obj; \
881		${MAKE} DIRPRFX=${_tool}/ depend; \
882		${MAKE} DIRPRFX=${_tool}/ all
883.endfor
884
885#
886# cross-tools: Build cross-building tools
887#
888.if (${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386") && \
889    ${TARGET_ARCH} != ${MACHINE_ARCH}
890_btxld=		usr.sbin/btxld
891.endif
892
893.if (!defined(NO_RESCUE) || defined(RELEASEDIR)) && \
894    ${TARGET_ARCH} != ${MACHINE_ARCH}
895_crunchide=	usr.sbin/crunch/crunchide
896.endif
897
898.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH}
899_elf2exe=	usr.sbin/elf2exe
900.endif
901
902.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
903    defined(RELEASEDIR)
904_kgzip=		usr.sbin/kgzip
905.endif
906
907cross-tools:
908.for _tool in \
909    gnu/usr.bin/binutils \
910    gnu/usr.bin/cc \
911    usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
912    ${_btxld} \
913    ${_crunchide} \
914    ${_elf2exe} \
915    ${_kgzip}
916	${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
917		cd ${.CURDIR}/${_tool}; \
918		${MAKE} DIRPRFX=${_tool}/ obj; \
919		${MAKE} DIRPRFX=${_tool}/ depend; \
920		${MAKE} DIRPRFX=${_tool}/ all; \
921		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
922.endfor
923
924#
925# hierarchy - ensure that all the needed directories are present
926#
927hierarchy:
928	cd ${.CURDIR}/etc;		${MAKE} distrib-dirs
929
930#
931# libraries - build all libraries, and install them under ${DESTDIR}.
932#
933# The list of libraries with dependents (${_prebuild_libs}) and their
934# interdependencies (__L) are built automatically by the
935# ${.CURDIR}/tools/make_libdeps.sh script.
936#
937libraries:
938	cd ${.CURDIR}; \
939	    ${MAKE} -f Makefile.inc1 _startup_libs; \
940	    ${MAKE} -f Makefile.inc1 _prebuild_libs; \
941	    ${MAKE} -f Makefile.inc1 _generic_libs;
942
943# These dependencies are not automatically generated:
944#
945# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
946# shared libraries for ELF.
947#
948_startup_libs=	gnu/lib/csu gnu/lib/libgcc
949.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
950_startup_libs+=	lib/csu/${MACHINE_ARCH}-elf
951.else
952_startup_libs+=	lib/csu/${MACHINE_ARCH}
953.endif
954
955_prebuild_libs=
956
957_generic_libs=	gnu/lib
958
959.if !defined(NO_KERBEROS) && !defined(NO_CRYPT) && !defined(NO_OPENSSL)
960_prebuild_libs+=	kerberos5/lib/libasn1
961_prebuild_libs+=	kerberos5/lib/libgssapi
962_prebuild_libs+=	kerberos5/lib/libkrb5
963_prebuild_libs+=	kerberos5/lib/libroken
964_generic_libs+=	kerberos5/lib
965.endif
966
967_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \
968		lib/libkvm lib/libmd \
969		lib/libncurses lib/libnetgraph lib/libopie lib/libpam \
970		lib/libradius \
971		lib/libsbuf lib/libtacplus lib/libutil \
972		lib/libz lib/msun
973
974lib/libopie__L lib/libtacplus__L: lib/libmd__L
975
976_generic_libs+=	lib
977
978.if !defined(NO_CRYPT)
979.if !defined(NO_OPENSSL)
980_prebuild_libs+=	secure/lib/libcrypto secure/lib/libssl
981lib/libradius__L: secure/lib/libssl__L
982secure/lib/libssl__L: secure/lib/libcrypto__L
983.if !defined(NO_OPENSSH)
984_prebuild_libs+=	secure/lib/libssh
985secure/lib/libssh__L: lib/libz__L secure/lib/libcrypto__L lib/libcrypt__L
986.if !defined(NO_KERBEROS)
987secure/lib/libssh__L: kerberos5/lib/libgssapi__L kerberos5/lib/libkrb5__L \
988    kerberos5/lib/libasn1__L lib/libcom_err__L lib/libmd__L \
989    kerberos5/lib/libroken__L
990.endif
991.endif
992.endif
993_generic_libs+=	secure/lib
994.endif
995
996.if defined(NO_CRYPT) || defined(NO_OPENSSL)
997lib/libradius__L: lib/libmd__L
998.endif
999
1000.if !defined(NO_NIS)
1001_prebuild_libs+=	lib/libypclnt
1002.endif
1003
1004_generic_libs+=	usr.bin/lex/lib
1005
1006.if ${MACHINE_ARCH} == "i386"
1007_generic_libs+=	usr.sbin/pcvt/keycap
1008.endif
1009
1010.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
1011${_lib}__L: .PHONY
1012.if exists(${.CURDIR}/${_lib})
1013	${_+_}@${ECHODIR} "===> ${_lib} (depend,all,install)"; \
1014		cd ${.CURDIR}/${_lib}; \
1015		${MAKE} DIRPRFX=${_lib}/ depend; \
1016		${MAKE} DIRPRFX=${_lib}/ all; \
1017		${MAKE} DIRPRFX=${_lib}/ install
1018.endif
1019.endfor
1020
1021# libpam is special: we need to build static PAM modules before
1022# static PAM library, and dynamic PAM library before dynamic PAM
1023# modules.
1024lib/libpam__L: .PHONY
1025	${_+_}@${ECHODIR} "===> lib/libpam (depend,all,install)"; \
1026		cd ${.CURDIR}/lib/libpam; \
1027		${MAKE} DIRPRFX=lib/libpam/ depend; \
1028		${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
1029		${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
1030
1031_startup_libs: ${_startup_libs:S/$/__L/}
1032_prebuild_libs: ${_prebuild_libs:S/$/__L/}
1033_generic_libs: ${_generic_libs:S/$/__L/}
1034
1035.for __target in all clean cleandepend cleandir depend includes obj
1036.for entry in ${SUBDIR}
1037${entry}.${__target}__D: .PHONY
1038	${_+_}@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1039		${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH} (${__target})"; \
1040		edir=${entry}.${MACHINE_ARCH}; \
1041		cd ${.CURDIR}/$${edir}; \
1042	else \
1043		${ECHODIR} "===> ${DIRPRFX}${entry} (${__target})"; \
1044		edir=${entry}; \
1045		cd ${.CURDIR}/$${edir}; \
1046	fi; \
1047	${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1048.endfor
1049par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1050.endfor
1051
1052.include <bsd.subdir.mk>
1053
1054#
1055# check for / delete old files section
1056#
1057
1058.include "ObsoleteFiles.inc"
1059
1060OLD_LIBS_MESSAGE="Please be sure no application still uses those libraries, \
1061else you can not start such an application. Consult UPDATING for more \
1062information regarding how to cope with the removal/revision bump of a \
1063specific library."
1064
1065.if !defined(BATCH_DELETE_OLD_FILES)
1066RM_I=-i
1067.endif
1068
1069delete-old-files:
1070.if defined(${TARGET_ARCH})
1071.error "You have to run this in a native environment!"
1072.endif
1073	@echo ">>> Removing old files (only deletes safe to delete libs)"
1074.for file in ${OLD_FILES}
1075# Ask for every old file if the user really wants to remove it.
1076# It's anoying, but beter safe than sorry.
1077	@[ ! -f "${DESTDIR}/${file}" ] || (rm ${RM_I} "${DESTDIR}/${file}" \
1078                ||  ([ -f "${DESTDIR}/${file}" ] \
1079                        && echo "Removing schg flag on ${DESTDIR}/${file}" \
1080                        && chflags noschg "${DESTDIR}/${file}" \
1081                        && rm ${RM_I} "${DESTDIR}/${file}"))
1082.endfor
1083	@echo ">>> Old files removed"
1084
1085check-old-files:
1086.if defined(${TARGET_ARCH})
1087.error "You have to run this in a native environment!"
1088.endif
1089	@echo ">>> Checking for old files"
1090.for file in ${OLD_FILES}
1091	@[ ! -f "${DESTDIR}/${file}" ] || echo "${DESTDIR}/${file}"
1092.endfor
1093
1094delete-old-libs:
1095.if defined(${TARGET_ARCH})
1096.error "You have to run this in a native environment!"
1097.endif
1098	@echo ">>> Removing old libraries"
1099	@echo "${OLD_LIBS_MESSAGE}" | fmt
1100.for file in ${OLD_LIBS}
1101	@[ ! -f "${DESTDIR}/${file}" ] || (rm ${RM_I} "${DESTDIR}/${file}" \
1102		||  ([ -f "${DESTDIR}/${file}" ] \
1103			&& echo "Removing schg flag on ${DESTDIR}/${file}" \
1104			&& chflags noschg "${DESTDIR}/${file}" \
1105			&& rm ${RM_I} "${DESTDIR}/${file}"))
1106.endfor
1107	@echo ">>> Old libraries removed"
1108
1109check-old-libs:
1110.if defined(${TARGET_ARCH})
1111.error "You have to run this in a native environment!"
1112.endif
1113	@echo ">>> Checking for old libraries"
1114.for file in ${OLD_LIBS}
1115	@[ ! -f "${DESTDIR}/${file}" ] || echo "${DESTDIR}/${file}"
1116.endfor
1117
1118delete-old-dirs:
1119.if defined(${TARGET_ARCH})
1120.error "You have to run this in a native environment!"
1121.endif
1122	@echo ">>> Removing old directories"
1123.for dir in ${OLD_DIRS}
1124# Don't fail if an old directory isn't empty.
1125	@[ ! -d "${DESTDIR}/${dir}" ] || (rmdir -v "${DESTDIR}/${dir}" || true)
1126.endfor
1127	@echo ">>> Old directories removed"
1128
1129check-old-dirs:
1130.if defined(${TARGET_ARCH})
1131.error "You have to run this in a native environment!"
1132.endif
1133	@echo ">>> Checking for old directories"
1134.for dir in ${OLD_DIRS}
1135	@[ ! -d "${DESTDIR}/${dir}" ] || echo "${DESTDIR}/${dir}"
1136.endfor
1137
1138delete-old: delete-old-files delete-old-dirs
1139	@echo "To remove old libraries run '${MAKE} delete-old-libs'."
1140
1141check-old: check-old-files check-old-libs check-old-dirs
1142	@echo "To remove old files and directories run '${MAKE} delete-old'."
1143	@echo "To remove old libraries run '${MAKE} delete-old-libs'."
1144
1145