Makefile.inc1 revision 120120 
1#
2# $FreeBSD: head/Makefile.inc1 120120 2003-09-16 12:53:18Z ru $
3#
4# Make command line options:
5#	-DNO_KERBEROS Do not build Heimdal (Kerberos 5)
6#	-DNO_RESCUE do not build rescue binaries
7#	-DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8#	-DNOCLEAN do not clean at all
9#	-DNOCRYPT will prevent building of crypt versions
10#	-DNOMAN do not build the manual pages
11#	-DNOPROFILE do not build profiled libraries
12#	-DNOGAMES do not go into games subdir
13#	-DNOSHARE do not go into share subdir
14#	-DNOINFO do not make or install info files
15#	-DNOLIBC_R do not build libc_r.
16#	-DNO_FORTRAN do not build g77 and related libraries.
17#	-DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18#	-DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19#	-DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20#	-DNO_PORTSUPDATE do not update ports in ${MAKE} update
21#	-DNO_DOCUPDATE do not update doc in ${MAKE} update
22#	LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23#	TARGET_ARCH="arch" to crossbuild world to a different arch
24
25#
26# The intended user-driven targets are:
27# buildworld  - rebuild *everything*, including glue to help do upgrades
28# installworld- install everything built by "buildworld"
29# update      - convenient way to update your source tree (eg: sup/cvs)
30# most        - build user commands, no libraries or include files
31# installmost - install user commands, no libraries or include files
32#
33# Standard targets (not defined here) are documented in the makefiles in
34# /usr/share/mk.  These include:
35#		obj depend all install clean cleandepend cleanobj
36
37# Put initial settings here.
38SUBDIR=
39
40# We must do share/info early so that installation of info `dir'
41# entries works correctly.  Do it first since it is less likely to
42# grow dependencies on include and lib than vice versa.
43.if exists(${.CURDIR}/share/info)
44SUBDIR+= share/info
45.endif
46
47.if exists(${.CURDIR}/include)
48SUBDIR+= include
49.endif
50.if exists(${.CURDIR}/lib)
51SUBDIR+= lib
52.endif
53
54# When upgrading to a dynamically linked root, install the runtime
55# linker early into its new location before make(1) has a chance
56# to run the dynamically linked /bin/sh.
57.if defined(WITH_DYNAMICROOT) && !defined(NOPIC) && \
58    (!defined(TARGET_ARCH) || ${TARGET_ARCH} == ${MACHINE_ARCH}) && \
59    !defined(DISTDIR) && \
60    (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") && \
61    !exists(/libexec/ld-elf.so.1)
62SUBDIR+= libexec/rtld-elf
63.endif
64
65.if exists(${.CURDIR}/bin)
66SUBDIR+= bin
67.endif
68.if exists(${.CURDIR}/games) && !defined(NOGAMES)
69SUBDIR+= games
70.endif
71.if exists(${.CURDIR}/gnu)
72SUBDIR+= gnu
73.endif
74.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
75    !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
76SUBDIR+= kerberos5
77.endif
78.if exists(${.CURDIR}/libexec)
79SUBDIR+= libexec
80.endif
81.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE)
82SUBDIR+= rescue
83.endif
84.if exists(${.CURDIR}/sbin)
85SUBDIR+= sbin
86.endif
87.if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
88SUBDIR+= secure
89.endif
90.if exists(${.CURDIR}/share) && !defined(NOSHARE)
91SUBDIR+= share
92.endif
93.if exists(${.CURDIR}/sys)
94SUBDIR+= sys
95.endif
96.if exists(${.CURDIR}/usr.bin)
97SUBDIR+= usr.bin
98.endif
99.if exists(${.CURDIR}/usr.sbin)
100SUBDIR+= usr.sbin
101.endif
102
103# etc must be last for "distribute" to work
104.if exists(${.CURDIR}/etc)
105SUBDIR+= etc
106.endif
107
108# These are last, since it is nice to at least get the base system
109# rebuilt before you do them.
110.if defined(LOCAL_DIRS)
111.for _DIR in ${LOCAL_DIRS}
112.if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile)
113SUBDIR+= ${_DIR}
114.endif
115.endfor
116.endif
117
118.if defined(SUBDIR_OVERRIDE)
119SUBDIR=		${SUBDIR_OVERRIDE}
120.endif
121
122.if defined(NOCLEANDIR)
123CLEANDIR=	clean cleandepend
124.else
125CLEANDIR=	cleandir
126.endif
127
128CVS?=		cvs
129SUP?=		/usr/local/bin/cvsup
130SUPFLAGS?=	-g -L 2 -P -
131.if defined(SUPHOST)
132SUPFLAGS+=	-h ${SUPHOST}
133.endif
134
135MAKEOBJDIRPREFIX?=	/usr/obj
136.if !defined(OSRELDATE)
137.if exists(/usr/include/osreldate.h)
138OSRELDATE!=	awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
139		/usr/include/osreldate.h
140.else
141OSRELDATE=	0
142.endif
143.endif
144TARGET_ARCH?=	${MACHINE_ARCH}
145.if ${TARGET_ARCH} == ${MACHINE_ARCH}
146TARGET?=	${MACHINE}
147TARGET_CPUTYPE?=${CPUTYPE}
148.else
149TARGET?=	${TARGET_ARCH}
150TARGET_CPUTYPE?=
151.endif
152.if !empty(TARGET_CPUTYPE)
153_TARGET_CPUTYPE=${TARGET_CPUTYPE}
154.else
155_TARGET_CPUTYPE=dummy
156.endif
157_CPUTYPE!=	${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \
158		CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE
159.if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
160.error CPUTYPE global should be set with ?=.
161.endif
162.if make(buildworld)
163BUILD_ARCH!=	sysctl -n hw.machine_arch
164.if ${MACHINE_ARCH} != ${BUILD_ARCH}
165.error To cross-build, set TARGET_ARCH.
166.endif
167.endif
168.if ${MACHINE} == ${TARGET}
169OBJTREE=	${MAKEOBJDIRPREFIX}
170.else
171OBJTREE=	${MAKEOBJDIRPREFIX}/${TARGET}
172.endif
173WORLDTMP=	${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
174# /usr/games added for fortune which depend on strfile
175BPATH=		${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
176XPATH=		${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
177STRICTTMPPATH=	${BPATH}:${XPATH}
178TMPPATH=	${STRICTTMPPATH}:${PATH}
179
180INSTALLTMP!=	/usr/bin/mktemp -d -u -t install
181
182#
183# Building a world goes through the following stages
184#
185# 1. legacy stage [BMAKE]
186#	This stage is responsible for creating compatibility
187#	shims that are needed by the bootstrap-tools,
188#	build-tools and cross-tools stages.
189# 1. bootstrap-tools stage [BMAKE]
190#	This stage is responsible for creating programs that
191#	are needed for backward compatibility reasons. They
192#	are not built as cross-tools.
193# 2. build-tools stage [TMAKE]
194#	This stage is responsible for creating the object
195#	tree and building any tools that are needed during
196#	the build process.
197# 3. cross-tools stage [XMAKE]
198#	This stage is responsible for creating any tools that
199#	are needed for cross-builds. A cross-compiler is one
200#	of them.
201# 4. world stage [WMAKE]
202#	This stage actually builds the world.
203# 5. install stage (optional) [IMAKE]
204#	This stage installs a previously built world.
205#
206
207BOOTSTRAPPING?=	0
208
209# Common environment for world related stages
210CROSSENV=	MAKEOBJDIRPREFIX=${OBJTREE} \
211		MACHINE_ARCH=${TARGET_ARCH} \
212		MACHINE=${TARGET} \
213		CPUTYPE=${TARGET_CPUTYPE} \
214		GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
215		GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
216		GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
217
218# bootstrap-tools stage
219BMAKEENV=	DESTDIR= \
220		INSTALL="sh ${.CURDIR}/tools/install.sh" \
221		PATH=${BPATH}:${PATH} \
222		WORLDTMP=${WORLDTMP} \
223		MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
224BMAKE=		MAKEOBJDIRPREFIX=${WORLDTMP} \
225		${BMAKEENV} ${MAKE} -f Makefile.inc1 \
226		BOOTSTRAPPING=${OSRELDATE} \
227		-DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \
228		-DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS
229
230# build-tools stage
231TMAKE=		MAKEOBJDIRPREFIX=${OBJTREE} \
232		${BMAKEENV} ${MAKE} -f Makefile.inc1 \
233		BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS
234
235# cross-tools stage
236XMAKE=		TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
237
238# world stage
239WMAKEENV=	${CROSSENV} \
240		DESTDIR=${WORLDTMP} \
241		_SHLIBDIRPREFIX=${WORLDTMP} \
242		INSTALL="sh ${.CURDIR}/tools/install.sh" \
243		PATH=${TMPPATH}
244WMAKE=		${WMAKEENV} ${MAKE} -f Makefile.inc1
245
246# install stage
247IMAKEENV=	${CROSSENV} \
248		PATH=${STRICTTMPPATH}:${INSTALLTMP}
249IMAKE=		${IMAKEENV} ${MAKE} -f Makefile.inc1
250
251# kernel stage
252KMAKEENV=	${WMAKEENV}
253
254#
255# buildworld
256#
257# Attempt to rebuild the entire system, with reasonable chance of
258# success, regardless of how old your existing system is.
259#
260_worldtmp:
261.if ${.CURDIR:C/[^,]//g} != ""
262#	The m4 build of sendmail files doesn't like it if ',' is used
263#	anywhere in the path of it's files.
264	@echo
265	@echo "*** Error: path to source tree contains a comma ','"
266	@echo
267	@false
268.endif
269	@echo
270	@echo "--------------------------------------------------------------"
271	@echo ">>> Rebuilding the temporary build tree"
272	@echo "--------------------------------------------------------------"
273.if !defined(NOCLEAN)
274	rm -rf ${WORLDTMP}
275.else
276	rm -rf ${WORLDTMP}/legacy/usr/include
277	# XXX - These two can depend on any header file.
278	rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
279	rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
280.endif
281.for _dir in \
282    usr/bin usr/games usr/include/sys usr/lib \
283    usr/libexec usr/sbin usr/share/dict \
284    usr/share/groff_font/devX100 \
285    usr/share/groff_font/devX100-12 \
286    usr/share/groff_font/devX75 \
287    usr/share/groff_font/devX75-12 \
288    usr/share/groff_font/devascii \
289    usr/share/groff_font/devcp1047 \
290    usr/share/groff_font/devdvi \
291    usr/share/groff_font/devhtml \
292    usr/share/groff_font/devkoi8-r \
293    usr/share/groff_font/devlatin1 \
294    usr/share/groff_font/devlbp \
295    usr/share/groff_font/devlj4 \
296    usr/share/groff_font/devps \
297    usr/share/groff_font/devutf8 \
298    usr/share/tmac/mdoc usr/share/tmac/mm
299	mkdir -p ${WORLDTMP}/legacy/${_dir}
300.endfor
301.for _dir in \
302    lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
303    usr/libexec usr/share/misc
304	mkdir -p ${WORLDTMP}/${_dir}
305.endfor
306	mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
307	    -p ${WORLDTMP}/usr/include
308	ln -sf ${.CURDIR}/sys ${WORLDTMP}
309_legacy:
310	@echo
311	@echo "--------------------------------------------------------------"
312	@echo ">>> stage 1.1: legacy release compatibility shims"
313	@echo "--------------------------------------------------------------"
314	cd ${.CURDIR}; ${BMAKE} legacy
315_bootstrap-tools:
316	@echo
317	@echo "--------------------------------------------------------------"
318	@echo ">>> stage 1.2: bootstrap tools"
319	@echo "--------------------------------------------------------------"
320	cd ${.CURDIR}; ${BMAKE} bootstrap-tools
321_cleanobj:
322.if !defined(NOCLEAN)
323	@echo
324	@echo "--------------------------------------------------------------"
325	@echo ">>> stage 2.1: cleaning up the object tree"
326	@echo "--------------------------------------------------------------"
327	cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
328.endif
329_obj:
330	@echo
331	@echo "--------------------------------------------------------------"
332	@echo ">>> stage 2.2: rebuilding the object tree"
333	@echo "--------------------------------------------------------------"
334	cd ${.CURDIR}; ${WMAKE} par-obj
335_build-tools:
336	@echo
337	@echo "--------------------------------------------------------------"
338	@echo ">>> stage 2.3: build tools"
339	@echo "--------------------------------------------------------------"
340	cd ${.CURDIR}; ${TMAKE} build-tools
341_cross-tools:
342	@echo
343	@echo "--------------------------------------------------------------"
344	@echo ">>> stage 3: cross tools"
345	@echo "--------------------------------------------------------------"
346	cd ${.CURDIR}; ${XMAKE} cross-tools
347_includes:
348	@echo
349	@echo "--------------------------------------------------------------"
350	@echo ">>> stage 4.1: populating ${WORLDTMP}/usr/include"
351	@echo "--------------------------------------------------------------"
352	cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
353_libraries:
354	@echo
355	@echo "--------------------------------------------------------------"
356	@echo ">>> stage 4.2: building libraries"
357	@echo "--------------------------------------------------------------"
358	cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG -DNOLINT \
359		libraries
360_depend:
361	@echo
362	@echo "--------------------------------------------------------------"
363	@echo ">>> stage 4.3: make dependencies"
364	@echo "--------------------------------------------------------------"
365	cd ${.CURDIR}; ${WMAKE} par-depend
366everything:
367	@echo
368	@echo "--------------------------------------------------------------"
369	@echo ">>> stage 4.4: building everything.."
370	@echo "--------------------------------------------------------------"
371	cd ${.CURDIR}; ${WMAKE} par-all
372
373
374WMAKE_TGTS=
375.if !defined(SUBDIR_OVERRIDE)
376WMAKE_TGTS+=	_worldtmp _legacy _bootstrap-tools
377.endif
378WMAKE_TGTS+=	_cleanobj _obj _build-tools
379.if !defined(SUBDIR_OVERRIDE)
380WMAKE_TGTS+=	_cross-tools
381.endif
382WMAKE_TGTS+=	_includes _libraries _depend everything
383
384buildworld: ${WMAKE_TGTS}
385.ORDER: ${WMAKE_TGTS}
386
387#
388# installcheck
389#
390# Checks to be sure system is ready for installworld
391#
392installcheck:
393.if !defined(NO_SENDMAIL)
394	@if ! `id -u smmsp > /dev/null`; then \
395		echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
396		false; \
397	fi
398	@if ! `id -g smmsp > /dev/null`; then \
399		echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
400		false; \
401	fi
402.endif
403
404#
405# distributeworld
406#
407# Distributes everything compiled by a `buildworld'.
408#
409# installworld
410#
411# Installs everything compiled by a 'buildworld'.
412#
413distributeworld installworld: installcheck
414	mkdir -p ${INSTALLTMP}
415	for prog in [ awk cap_mkdb cat chflags chmod chown \
416	    date echo egrep find grep \
417	    ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
418	    test true uname wc zic; do \
419		cp `which $$prog` ${INSTALLTMP}; \
420	done
421	cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
422	rm -rf ${INSTALLTMP}
423
424#
425# reinstall
426#
427# If you have a build server, you can NFS mount the source and obj directories
428# and do a 'make reinstall' on the *client* to install new binaries from the
429# most recent server build.
430#
431reinstall:
432	@echo "--------------------------------------------------------------"
433	@echo ">>> Making hierarchy"
434	@echo "--------------------------------------------------------------"
435	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
436	@echo
437	@echo "--------------------------------------------------------------"
438	@echo ">>> Installing everything.."
439	@echo "--------------------------------------------------------------"
440	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
441.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
442	@echo
443	@echo "--------------------------------------------------------------"
444	@echo ">>> Rebuilding man page indices"
445	@echo "--------------------------------------------------------------"
446	cd ${.CURDIR}/share/man; ${MAKE} makedb
447.endif
448
449redistribute:
450	@echo "--------------------------------------------------------------"
451	@echo ">>> Distributing everything.."
452	@echo "--------------------------------------------------------------"
453	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
454
455#
456# buildkernel and installkernel
457#
458# Which kernels to build and/or install is specified by setting
459# KERNCONF. If not defined a GENERIC kernel is built/installed.
460# Only the existing (depending TARGET) config files are used
461# for building kernels and only the first of these is designated
462# as the one being installed.
463#
464# Note that we have to use TARGET instead of TARGET_ARCH when
465# we're in kernel-land. Since only TARGET_ARCH is (expected) to
466# be set to cross-build, we have to make sure TARGET is set
467# properly.
468
469.if !defined(KERNCONF) && defined(KERNEL)
470KERNCONF=	${KERNEL}
471KERNWARN=	yes
472.else
473KERNCONF?=	GENERIC
474.endif
475INSTKERNNAME?=	kernel
476
477KERNSRCDIR?=	${.CURDIR}/sys
478KRNLCONFDIR=	${KERNSRCDIR}/${TARGET}/conf
479KRNLOBJDIR=	${OBJTREE}${KERNSRCDIR}
480KERNCONFDIR?=	${KRNLCONFDIR}
481
482BUILDKERNELS=
483INSTALLKERNEL=
484.for _kernel in ${KERNCONF}
485.if exists(${KERNCONFDIR}/${_kernel})
486BUILDKERNELS+=	${_kernel}
487.if empty(INSTALLKERNEL)
488INSTALLKERNEL= ${_kernel}
489.endif
490.endif
491.endfor
492
493#
494# buildkernel
495#
496# Builds all kernels defined by BUILDKERNELS.
497#
498buildkernel:
499.if empty(BUILDKERNELS)
500	@echo "ERROR: Missing kernel configuration file(s) (${KERNCONF}).";
501	@false
502.endif
503.if defined(KERNWARN)
504	@echo "--------------------------------------------------------------"
505	@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
506	@echo "--------------------------------------------------------------"
507	@sleep 3
508.endif
509	@echo
510.for _kernel in ${BUILDKERNELS}
511	@echo "--------------------------------------------------------------"
512	@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
513	@echo "--------------------------------------------------------------"
514	@echo "===> ${_kernel}"
515	mkdir -p ${KRNLOBJDIR}
516.if !defined(NO_KERNELCONFIG)
517	cd ${KRNLCONFDIR}; \
518		PATH=${TMPPATH} \
519		    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
520			${KERNCONFDIR}/${_kernel}
521.endif
522.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
523	cd ${KRNLOBJDIR}/${_kernel}; \
524	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR}
525.endif
526	cd ${KRNLOBJDIR}/${_kernel}; \
527	    MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
528	    ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
529	cd ${KRNLOBJDIR}/${_kernel}; \
530	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj
531# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
532.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
533.for target in obj depend all
534	cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \
535	    MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
536	    ${MAKE} -DNO_CPU_CFLAGS ${target}
537.endfor
538.endif
539.if !defined(NO_KERNELDEPEND)
540	cd ${KRNLOBJDIR}/${_kernel}; \
541	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
542.endif
543	cd ${KRNLOBJDIR}/${_kernel}; \
544	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
545	@echo "--------------------------------------------------------------"
546	@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
547	@echo "--------------------------------------------------------------"
548.endfor
549
550#
551# installkernel
552#
553# Install the kernel defined by INSTALLKERNEL
554#
555installkernel reinstallkernel installkernel.debug reinstallkernel.debug:
556.if empty(INSTALLKERNEL)
557	@echo "ERROR: No kernel \"${KERNCONF}\" to install."
558	@false
559.endif
560	cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
561	    ${CROSSENV} PATH=${TMPPATH} \
562	    ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}
563
564#
565# update
566#
567# Update the source tree, by running sup and/or running cvs to update to the
568# latest copy.
569#
570update:
571.if defined(SUP_UPDATE)
572	@echo "--------------------------------------------------------------"
573	@echo ">>> Running ${SUP}"
574	@echo "--------------------------------------------------------------"
575.if defined(SUPFILE)
576	@${SUP} ${SUPFLAGS} ${SUPFILE}
577.endif
578.if defined(SUPFILE1)
579	@${SUP} ${SUPFLAGS} ${SUPFILE1}
580.endif
581.if defined(SUPFILE2)
582	@${SUP} ${SUPFLAGS} ${SUPFILE2}
583.endif
584.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
585	@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
586.endif
587.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
588	@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
589.endif
590.endif
591.if defined(CVS_UPDATE)
592	@echo "--------------------------------------------------------------"
593	@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
594	@echo "--------------------------------------------------------------"
595	cd ${.CURDIR}; ${CVS} -R -q update -A -P -d
596.endif
597
598#
599# most
600#
601# Build most of the user binaries on the existing system libs and includes.
602#
603most:
604	@echo "--------------------------------------------------------------"
605	@echo ">>> Building programs only"
606	@echo "--------------------------------------------------------------"
607.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
608	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ all
609.endfor
610
611#
612# installmost
613#
614# Install the binaries built by the 'most' target.  This does not include
615# libraries or include files.
616#
617installmost:
618	@echo "--------------------------------------------------------------"
619	@echo ">>> Installing programs only"
620	@echo "--------------------------------------------------------------"
621.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
622	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ install
623.endfor
624
625#
626# ------------------------------------------------------------------------
627#
628# From here onwards are utility targets used by the 'make world' and
629# related targets.  If your 'world' breaks, you may like to try to fix
630# the problem and manually run the following targets to attempt to
631# complete the build.  Beware, this is *not* guaranteed to work, you
632# need to have a pretty good grip on the current state of the system
633# to attempt to manually finish it.  If in doubt, 'make world' again.
634#
635
636#
637# legacy: Build compatibility shims for the next three targets
638#
639legacy:
640.for _tool in tools/build
641	@${ECHODIR} "===> ${_tool}"; \
642	    cd ${.CURDIR}/${_tool}; \
643	    ${MAKE} DIRPRFX=${_tool}/ obj; \
644	    ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
645	    ${MAKE} DIRPRFX=${_tool}/ depend; \
646	    ${MAKE} DIRPRFX=${_tool}/ all; \
647	    ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
648.endfor
649
650#
651# bootstrap-tools: Build tools needed for compatibility
652#
653.if exists(${.CURDIR}/games) && !defined(NOGAMES)
654_strfile=	games/fortune/strfile
655.endif
656
657.if !defined(NO_CXX)
658_gperf=	gnu/usr.bin/gperf
659.if ${BOOTSTRAPPING} < 500113
660_groff=		gnu/usr.bin/groff
661.else
662_groff=		gnu/usr.bin/groff/tmac
663.endif
664.endif
665
666.if ${BOOTSTRAPPING} < 450005 || \
667    ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034
668_uudecode=	usr.bin/uudecode
669.endif
670
671.if ${BOOTSTRAPPING} < 430002 || \
672    ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019
673_xargs=		usr.bin/xargs
674.endif
675
676.if ${BOOTSTRAPPING} < 430002 || \
677    ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018
678_yacc=		usr.bin/yacc
679.endif
680
681.if !defined(NO_RESCUE) && \
682    ${BOOTSTRAPPING} < 501100
683_crunchgen=	usr.sbin/crunch/crunchgen
684.endif
685
686.if ${BOOTSTRAPPING} < 500019
687_kbdcontrol=	usr.sbin/kbdcontrol
688.endif
689
690bootstrap-tools:
691.for _tool in \
692    ${_strfile} \
693    ${_gperf} \
694    ${_groff} \
695    gnu/usr.bin/texinfo \
696    usr.bin/colldef \
697    usr.bin/makewhatis \
698    usr.bin/rpcgen \
699    ${_uudecode} \
700    ${_xargs} \
701    usr.bin/xinstall \
702    ${_yacc} \
703    usr.sbin/config \
704    ${_crunchgen} \
705    ${_kbdcontrol}
706	@${ECHODIR} "===> ${_tool}"; \
707		cd ${.CURDIR}/${_tool}; \
708		${MAKE} DIRPRFX=${_tool}/ obj; \
709		${MAKE} DIRPRFX=${_tool}/ depend; \
710		${MAKE} DIRPRFX=${_tool}/ all; \
711		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
712.endfor
713
714#
715# build-tools: Build special purpose build tools
716#
717.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
718_aicasm= sys/modules/aic7xxx/aicasm
719.endif
720
721.if exists(${.CURDIR}/share) && !defined(NOSHARE)
722_share=	share/syscons/scrnmaps
723.endif
724
725.if !defined(NO_FORTRAN)
726_fortran= gnu/usr.bin/cc/f771
727.endif
728
729.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
730    !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
731_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
732    kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
733.endif
734
735.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE)
736_rescue= rescue/rescue
737.endif
738
739build-tools:
740.for _tool in \
741    bin/csh \
742    bin/sh \
743    ${_rescue} \
744    gnu/usr.bin/cc/cc_tools \
745    ${_fortran} \
746    ${_libkrb5} \
747    lib/libncurses \
748    ${_share} \
749    ${_aicasm} \
750    usr.bin/awk \
751    usr.bin/file \
752    usr.sbin/sysinstall
753	@${ECHODIR} "===> ${_tool}"; \
754		cd ${.CURDIR}/${_tool}; \
755		${MAKE} DIRPRFX=${_tool}/ obj; \
756		${MAKE} DIRPRFX=${_tool}/ build-tools
757.endfor
758
759#
760# cross-tools: Build cross-building tools
761#
762.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
763    ${BOOTSTRAPPING} < 500037
764_elf2aout=	usr.bin/elf2aout
765.endif
766
767.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH}
768_btxld=		usr.sbin/btxld
769.endif
770
771.if (!defined(NO_RESCUE) || \
772    defined(RELEASEDIR)) && \
773    (${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101)
774_crunchide=	usr.sbin/crunch/crunchide
775.endif
776
777.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH}
778_elf2exe=	usr.sbin/elf2exe
779.endif
780
781.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
782    defined(RELEASEDIR)
783_kgzip=		usr.sbin/kgzip
784.endif
785
786cross-tools:
787.for _tool in \
788    gnu/usr.bin/binutils \
789    gnu/usr.bin/cc \
790    ${_elf2aout} \
791    usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
792    ${_btxld} \
793    ${_crunchide} \
794    ${_elf2exe} \
795    ${_kgzip}
796	@${ECHODIR} "===> ${_tool}"; \
797		cd ${.CURDIR}/${_tool}; \
798		${MAKE} DIRPRFX=${_tool}/ obj; \
799		${MAKE} DIRPRFX=${_tool}/ depend; \
800		${MAKE} DIRPRFX=${_tool}/ all; \
801		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
802.endfor
803
804#
805# hierarchy - ensure that all the needed directories are present
806#
807hierarchy:
808	cd ${.CURDIR}/etc;		${MAKE} distrib-dirs
809
810#
811# libraries - build all libraries, and install them under ${DESTDIR}.
812#
813# The list of libraries with dependents (${_prebuild_libs}) and their
814# interdependencies (__L) are built automatically by the
815# ${.CURDIR}/tools/make_libdeps.sh script.
816#
817libraries:
818	cd ${.CURDIR}; \
819	    ${MAKE} -f Makefile.inc1 _startup_libs; \
820	    ${MAKE} -f Makefile.inc1 _prebuild_libs; \
821	    ${MAKE} -f Makefile.inc1 _generic_libs;
822
823# These dependencies are not automatically generated:
824#
825# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
826# shared libraries for ELF.
827#
828_startup_libs=	gnu/lib/csu gnu/lib/libgcc
829.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
830_startup_libs+=	lib/csu/${MACHINE_ARCH}-elf
831.else
832_startup_libs+=	lib/csu/${MACHINE_ARCH}
833.endif
834
835_prebuild_libs=
836
837_generic_libs=	gnu/lib
838
839.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
840    !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
841_prebuild_libs+=	kerberos5/lib/libasn1
842_prebuild_libs+=	kerberos5/lib/libgssapi
843_prebuild_libs+=	kerberos5/lib/libkrb5
844_prebuild_libs+=	kerberos5/lib/libroken
845_generic_libs+=	kerberos5/lib
846.endif
847
848_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \
849		lib/libkvm lib/libmd \
850		lib/libncurses lib/libopie lib/libpam lib/libradius \
851		lib/librpcsvc \
852		lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
853		lib/libz lib/msun
854
855lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
856lib/libypclnt__L: lib/librpcsvc__L
857
858_generic_libs+=	lib
859
860.if !defined(NOCRYPT)
861.if !defined(NO_OPENSSL)
862_prebuild_libs+=	secure/lib/libcrypto secure/lib/libssl
863.if !defined(NO_OPENSSH)
864_prebuild_libs+=	secure/lib/libssh
865secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
866.endif
867.endif
868_generic_libs+=	secure/lib
869.endif
870
871_generic_libs+=	usr.bin/lex/lib
872
873.if ${MACHINE_ARCH} == "i386"
874_generic_libs+=	usr.sbin/pcvt/keycap
875.endif
876
877.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
878${_lib}__L: .PHONY
879.if exists(${.CURDIR}/${_lib})
880	@${ECHODIR} "===> ${_lib}"; \
881		cd ${.CURDIR}/${_lib}; \
882		${MAKE} DIRPRFX=${_lib}/ depend; \
883		${MAKE} DIRPRFX=${_lib}/ all; \
884		${MAKE} DIRPRFX=${_lib}/ install
885.endif
886.endfor
887
888# libpam is special: we need to build static PAM modules before
889# static PAM library, and dynamic PAM library before dynamic PAM
890# modules.
891lib/libpam__L: .PHONY
892	@${ECHODIR} "===> lib/libpam"; \
893		cd ${.CURDIR}/lib/libpam; \
894		${MAKE} DIRPRFX=lib/libpam/ depend; \
895		${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
896		${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
897
898_startup_libs: ${_startup_libs:S/$/__L/}
899_prebuild_libs: ${_prebuild_libs:S/$/__L/}
900_generic_libs: ${_generic_libs:S/$/__L/}
901
902.for __target in all clean cleandepend cleandir depend includes obj
903.for entry in ${SUBDIR}
904${entry}.${__target}__D: .PHONY
905	@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
906		${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
907		edir=${entry}.${MACHINE_ARCH}; \
908		cd ${.CURDIR}/$${edir}; \
909	else \
910		${ECHODIR} "===> ${DIRPRFX}${entry}"; \
911		edir=${entry}; \
912		cd ${.CURDIR}/$${edir}; \
913	fi; \
914	${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
915.endfor
916par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
917.endfor
918
919.include <bsd.subdir.mk>
920