Makefile.inc1 revision 110722
1# 2# $FreeBSD: head/Makefile.inc1 110722 2003-02-11 19:21:13Z trhodes $ 3# 4# Make command line options: 5# -DMAKE_KERBEROS4 to build KerberosIV 6# -DMAKE_KERBEROS5 to build Kerberos5 7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 8# -DNOCLEAN do not clean at all 9# -DNOCRYPT will prevent building of crypt versions 10# -DNOMAN do not build the manual pages 11# -DNOPROFILE do not build profiled libraries 12# -DNOSECURE do not go into secure subdir 13# -DNOGAMES do not go into games subdir 14# -DNOSHARE do not go into share subdir 15# -DNOINFO do not make or install info files 16# -DNOLIBC_R do not build libc_r. 17# -DNO_FORTRAN do not build g77 and related libraries. 18# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 19# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 20# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 21# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 22# -DNO_DOCUPDATE do not update doc in ${MAKE} update 23# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 24# TARGET_ARCH="arch" to crossbuild world to a different arch 25 26# 27# The intended user-driven targets are: 28# buildworld - rebuild *everything*, including glue to help do upgrades 29# installworld- install everything built by "buildworld" 30# update - convenient way to update your source tree (eg: sup/cvs) 31# most - build user commands, no libraries or include files 32# installmost - install user commands, no libraries or include files 33# 34# Standard targets (not defined here) are documented in the makefiles in 35# /usr/share/mk. These include: 36# obj depend all install clean cleandepend cleanobj 37 38# Put initial settings here. 39SUBDIR= 40 41# We must do share/info early so that installation of info `dir' 42# entries works correctly. Do it first since it is less likely to 43# grow dependencies on include and lib than vice versa. 44.if exists(${.CURDIR}/share/info) 45SUBDIR+= share/info 46.endif 47 48.if exists(${.CURDIR}/include) 49SUBDIR+= include 50.endif 51.if exists(${.CURDIR}/lib) 52SUBDIR+= lib 53.endif 54 55.if exists(${.CURDIR}/bin) 56SUBDIR+= bin 57.endif 58.if exists(${.CURDIR}/games) && !defined(NOGAMES) 59SUBDIR+= games 60.endif 61.if exists(${.CURDIR}/gnu) 62SUBDIR+= gnu 63.endif 64.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \ 65 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4) 66SUBDIR+= kerberosIV 67.endif 68.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 69 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5) 70SUBDIR+= kerberos5 71.endif 72.if exists(${.CURDIR}/libexec) 73SUBDIR+= libexec 74.endif 75.if exists(${.CURDIR}/sbin) 76SUBDIR+= sbin 77.endif 78.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE) 79SUBDIR+= secure 80.endif 81.if exists(${.CURDIR}/share) && !defined(NOSHARE) 82SUBDIR+= share 83.endif 84.if exists(${.CURDIR}/sys) 85SUBDIR+= sys 86.endif 87.if exists(${.CURDIR}/usr.bin) 88SUBDIR+= usr.bin 89.endif 90.if exists(${.CURDIR}/usr.sbin) 91SUBDIR+= usr.sbin 92.endif 93 94# etc must be last for "distribute" to work 95.if exists(${.CURDIR}/etc) 96SUBDIR+= etc 97.endif 98 99# These are last, since it is nice to at least get the base system 100# rebuilt before you do them. 101.if defined(LOCAL_DIRS) 102.for _DIR in ${LOCAL_DIRS} 103.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 104SUBDIR+= ${_DIR} 105.endif 106.endfor 107.endif 108 109.if defined(SUBDIR_OVERRIDE) 110SUBDIR= ${SUBDIR_OVERRIDE} 111.endif 112 113.if defined(NOCLEANDIR) 114CLEANDIR= clean cleandepend 115.else 116CLEANDIR= cleandir 117.endif 118 119CVS?= cvs 120SUP?= /usr/local/bin/cvsup 121SUPFLAGS?= -g -L 2 -P - 122.if defined(SUPHOST) 123SUPFLAGS+= -h ${SUPHOST} 124.endif 125 126MAKEOBJDIRPREFIX?= /usr/obj 127OSRELDATE!= sysctl -n kern.osreldate 128TARGET_ARCH?= ${MACHINE_ARCH} 129.if ${TARGET_ARCH} == ${MACHINE_ARCH} 130TARGET?= ${MACHINE} 131TARGET_CPUTYPE?=${CPUTYPE} 132.else 133TARGET?= ${TARGET_ARCH} 134TARGET_CPUTYPE?= 135.endif 136.if !empty(TARGET_CPUTYPE) 137_TARGET_CPUTYPE=${TARGET_CPUTYPE} 138.else 139_TARGET_CPUTYPE=dummy 140.endif 141_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 142 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 143.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 144.error CPUTYPE global should be set with ?=. 145.endif 146.if make(buildworld) 147BUILD_ARCH!= sysctl -n hw.machine_arch 148.if ${MACHINE_ARCH} != ${BUILD_ARCH} 149.error To cross-build, set TARGET_ARCH. 150.endif 151.endif 152.if ${MACHINE} == ${TARGET} 153OBJTREE= ${MAKEOBJDIRPREFIX} 154.else 155OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 156.endif 157WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 158# /usr/games added for fortune which depend on strfile 159STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 160TMPPATH= ${STRICTTMPPATH}:${PATH} 161 162INSTALLTMP!= /usr/bin/mktemp -d -u -t install 163 164# 165# Building a world goes through the following stages 166# 167# 1. bootstrap-tool stage [BMAKE] 168# This stage is responsible for creating programs that 169# are needed for backward compatibility reasons. They 170# are not built as cross-tools. 171# 2. build-tool stage [TMAKE] 172# This stage is responsible for creating the object 173# tree and building any tools that are needed during 174# the build process. 175# 3. cross-tool stage [XMAKE] 176# This stage is responsible for creating any tools that 177# are needed for cross-builds. A cross-compiler is one 178# of them. 179# 4. world stage [WMAKE] 180# This stage actually builds the world. 181# 5. install stage (optional) [IMAKE] 182# This stage installs a previously built world. 183# 184 185# Common environment for world related stages 186CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 187 MACHINE_ARCH=${TARGET_ARCH} \ 188 MACHINE=${TARGET} \ 189 CPUTYPE=${TARGET_CPUTYPE} \ 190 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \ 191 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \ 192 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac 193 194# bootstrap-tool stage 195BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \ 196 DESTDIR= \ 197 INSTALL="sh ${.CURDIR}/tools/install.sh" 198BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 199 BOOTSTRAPPING=${OSRELDATE} \ 200 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 201 -DNO_CPU_CFLAGS -DNO_WERROR 202 203# build-tool stage 204TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 205 DESTDIR= \ 206 INSTALL="sh ${.CURDIR}/tools/install.sh" 207TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 \ 208 BOOTSTRAPPING=${OSRELDATE} -DNO_CPU_CFLAGS 209 210# cross-tool stage 211XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 212 213# world stage 214WMAKEENV= ${CROSSENV} \ 215 DESTDIR=${WORLDTMP} \ 216 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 217 PATH=${TMPPATH} 218WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 219 220# install stage 221IMAKEENV= ${CROSSENV} \ 222 PATH=${STRICTTMPPATH}:${INSTALLTMP} 223IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 224 225# kernel stage 226KMAKEENV= ${WMAKEENV} 227 228USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \ 229 usr/libexec usr/sbin usr/share/misc \ 230 usr/share/dict \ 231 usr/share/groff_font/devX100 \ 232 usr/share/groff_font/devX100-12 \ 233 usr/share/groff_font/devX75 \ 234 usr/share/groff_font/devX75-12 \ 235 usr/share/groff_font/devascii \ 236 usr/share/groff_font/devcp1047 \ 237 usr/share/groff_font/devdvi \ 238 usr/share/groff_font/devhtml \ 239 usr/share/groff_font/devkoi8-r \ 240 usr/share/groff_font/devlatin1 \ 241 usr/share/groff_font/devlbp \ 242 usr/share/groff_font/devlj4 \ 243 usr/share/groff_font/devps \ 244 usr/share/groff_font/devutf8 \ 245 usr/share/tmac/mdoc usr/share/tmac/mm 246 247INCDIRS= arpa dev fs g++/backward g++/bits g++/ext isc isofs libmilter \ 248 objc openssl protocols readline rpc rpcsvc security ufs 249 250# 251# buildworld 252# 253# Attempt to rebuild the entire system, with reasonable chance of 254# success, regardless of how old your existing system is. 255# 256_worldtmp: 257.if ${.CURDIR:C/[^,]//g} != "" 258# The m4 build of sendmail files doesn't like it if ',' is used 259# anywhere in the path of it's files. 260 @echo 261 @echo "*** Error: path to source tree contains a comma ','" 262 @echo 263 @false 264.endif 265 @echo 266 @echo "--------------------------------------------------------------" 267 @echo ">>> Rebuilding the temporary build tree" 268 @echo "--------------------------------------------------------------" 269.if !defined(NOCLEAN) 270 rm -rf ${WORLDTMP} 271.else 272 # XXX - These two can depend on any header file. 273 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 274 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 275.endif 276.for _dir in ${USRDIRS} 277 mkdir -p ${WORLDTMP}/${_dir} 278.endfor 279.for _dir in ${INCDIRS} 280 mkdir -p ${WORLDTMP}/usr/include/${_dir} 281.endfor 282 ln -sf ${.CURDIR}/sys ${WORLDTMP} 283_bootstrap-tools: 284 @echo 285 @echo "--------------------------------------------------------------" 286 @echo ">>> stage 1: bootstrap tools" 287 @echo "--------------------------------------------------------------" 288 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 289_cleanobj: 290.if !defined(NOCLEAN) 291 @echo 292 @echo "--------------------------------------------------------------" 293 @echo ">>> stage 2: cleaning up the object tree" 294 @echo "--------------------------------------------------------------" 295 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 296.endif 297_obj: 298 @echo 299 @echo "--------------------------------------------------------------" 300 @echo ">>> stage 2: rebuilding the object tree" 301 @echo "--------------------------------------------------------------" 302 cd ${.CURDIR}; ${WMAKE} par-obj 303_build-tools: 304 @echo 305 @echo "--------------------------------------------------------------" 306 @echo ">>> stage 2: build tools" 307 @echo "--------------------------------------------------------------" 308 cd ${.CURDIR}; ${TMAKE} build-tools 309_cross-tools: 310 @echo 311 @echo "--------------------------------------------------------------" 312 @echo ">>> stage 3: cross tools" 313 @echo "--------------------------------------------------------------" 314 cd ${.CURDIR}; ${XMAKE} cross-tools 315_includes: 316 @echo 317 @echo "--------------------------------------------------------------" 318 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 319 @echo "--------------------------------------------------------------" 320 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 321_libraries: 322 @echo 323 @echo "--------------------------------------------------------------" 324 @echo ">>> stage 4: building libraries" 325 @echo "--------------------------------------------------------------" 326 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 327_depend: 328 @echo 329 @echo "--------------------------------------------------------------" 330 @echo ">>> stage 4: make dependencies" 331 @echo "--------------------------------------------------------------" 332 cd ${.CURDIR}; ${WMAKE} par-depend 333everything: 334 @echo 335 @echo "--------------------------------------------------------------" 336 @echo ">>> stage 4: building everything.." 337 @echo "--------------------------------------------------------------" 338 cd ${.CURDIR}; ${WMAKE} all 339 340 341WMAKE_TGTS= 342.if !defined(SUBDIR_OVERRIDE) 343WMAKE_TGTS+= _worldtmp _bootstrap-tools 344.endif 345WMAKE_TGTS+= _cleanobj _obj _build-tools 346.if !defined(SUBDIR_OVERRIDE) 347WMAKE_TGTS+= _cross-tools 348.endif 349WMAKE_TGTS+= _includes _libraries _depend everything 350 351buildworld: ${WMAKE_TGTS} 352.ORDER: ${WMAKE_TGTS} 353 354# 355# installcheck 356# 357# Checks to be sure system is ready for installworld 358# 359installcheck: 360.if !defined(NO_SENDMAIL) 361 @if ! `grep -q '^smmsp:' /etc/passwd`; then \ 362 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 363 false; \ 364 fi 365 @if ! `grep -q '^smmsp:' /etc/group`; then \ 366 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 367 false; \ 368 fi 369.endif 370.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 371 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 372 @echo "Checking to see if your booted kernel is fresh enough.." 373 ${.OBJDIR}/bin/sh/sh -c \ 374 'echo "Testing installed kernel for new sigaction(2) syscall"' 375 @echo "Seems ok.." 376.endif 377 378# 379# distributeworld 380# 381# Distributes everything compiled by a `buildworld'. 382# 383# installworld 384# 385# Installs everything compiled by a 'buildworld'. 386# 387distributeworld installworld: installcheck 388 mkdir -p ${INSTALLTMP} 389 for prog in [ awk cat chflags chmod chown date echo egrep find grep \ 390 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 391 test true uname wc zic; do \ 392 cp `which $$prog` ${INSTALLTMP}; \ 393 done 394 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 395 rm -rf ${INSTALLTMP} 396 397# 398# reinstall 399# 400# If you have a build server, you can NFS mount the source and obj directories 401# and do a 'make reinstall' on the *client* to install new binaries from the 402# most recent server build. 403# 404reinstall: 405 @echo "--------------------------------------------------------------" 406 @echo ">>> Making hierarchy" 407 @echo "--------------------------------------------------------------" 408 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 409 @echo 410 @echo "--------------------------------------------------------------" 411 @echo ">>> Installing everything.." 412 @echo "--------------------------------------------------------------" 413 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 414.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 415 @echo 416 @echo "--------------------------------------------------------------" 417 @echo ">>> Rebuilding man page indices" 418 @echo "--------------------------------------------------------------" 419 cd ${.CURDIR}/share/man; ${MAKE} makedb 420.endif 421 422redistribute: 423 @echo "--------------------------------------------------------------" 424 @echo ">>> Distributing everything.." 425 @echo "--------------------------------------------------------------" 426 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 427 428# 429# buildkernel and installkernel 430# 431# Which kernels to build and/or install is specified by setting 432# KERNCONF. If not defined a GENERIC kernel is built/installed. 433# Only the existing (depending TARGET) config files are used 434# for building kernels and only the first of these is designated 435# as the one being installed. 436# 437# Note that we have to use TARGET instead of TARGET_ARCH when 438# we're in kernel-land. Since only TARGET_ARCH is (expected) to 439# be set to cross-build, we have to make sure TARGET is set 440# properly. 441 442.if !defined(KERNCONF) && defined(KERNEL) 443KERNCONF= ${KERNEL} 444KERNWARN= yes 445.else 446KERNCONF?= GENERIC 447.endif 448INSTKERNNAME?= kernel 449 450KRNLSRCDIR= ${.CURDIR}/sys 451KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf 452KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 453KERNCONFDIR?= ${KRNLCONFDIR} 454 455BUILDKERNELS= 456INSTALLKERNEL= 457.for _kernel in ${KERNCONF} 458.if exists(${KERNCONFDIR}/${_kernel}) 459BUILDKERNELS+= ${_kernel} 460.if empty(INSTALLKERNEL) 461INSTALLKERNEL= ${_kernel} 462.endif 463.endif 464.endfor 465 466# 467# buildkernel 468# 469# Builds all kernels defined by BUILDKERNELS. 470# 471buildkernel: 472.if empty(BUILDKERNELS) 473 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 474 @false 475.endif 476.if defined(KERNWARN) 477 @echo "--------------------------------------------------------------" 478 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 479 @echo "--------------------------------------------------------------" 480 @sleep 3 481.endif 482 @echo 483.for _kernel in ${BUILDKERNELS} 484 @echo "--------------------------------------------------------------" 485 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 486 @echo "--------------------------------------------------------------" 487 @echo "===> ${_kernel}" 488 mkdir -p ${KRNLOBJDIR} 489.if !defined(NO_KERNELCONFIG) 490 cd ${KRNLCONFDIR}; \ 491 PATH=${TMPPATH} \ 492 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 493 ${KERNCONFDIR}/${_kernel} 494.endif 495.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 496 cd ${KRNLOBJDIR}/${_kernel}; \ 497 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean 498.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules) 499 cd ${KRNLOBJDIR}/${_kernel}; \ 500 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir 501.endif 502.endif 503 cd ${KRNLOBJDIR}/${_kernel}; \ 504 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \ 505 ${MAKE} -DNO_CPU_CFLAGS -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile 506.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules) 507 cd ${KRNLOBJDIR}/${_kernel}; \ 508 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} modules-obj 509 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 510 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 511 ${MAKE} -DNO_CPU_CFLAGS depend; \ 512 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 513 ${MAKE} -DNO_CPU_CFLAGS all 514.endif 515.if !defined(NO_KERNELDEPEND) 516 cd ${KRNLOBJDIR}/${_kernel}; \ 517 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 518.endif 519 cd ${KRNLOBJDIR}/${_kernel}; \ 520 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 521 @echo "--------------------------------------------------------------" 522 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 523 @echo "--------------------------------------------------------------" 524.endfor 525 526# 527# installkernel 528# 529# Install the kernel defined by INSTALLKERNEL 530# 531installkernel reinstallkernel: 532.if empty(INSTALLKERNEL) 533 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 534 @false 535.endif 536 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 537 ${CROSSENV} PATH=${TMPPATH} \ 538 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 539 540# 541# update 542# 543# Update the source tree, by running sup and/or running cvs to update to the 544# latest copy. 545# 546update: 547.if defined(SUP_UPDATE) 548 @echo "--------------------------------------------------------------" 549 @echo ">>> Running ${SUP}" 550 @echo "--------------------------------------------------------------" 551.if defined(SUPFILE) 552 @${SUP} ${SUPFLAGS} ${SUPFILE} 553.endif 554.if defined(SUPFILE1) 555 @${SUP} ${SUPFLAGS} ${SUPFILE1} 556.endif 557.if defined(SUPFILE2) 558 @${SUP} ${SUPFLAGS} ${SUPFILE2} 559.endif 560.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 561 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 562.endif 563.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 564 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 565.endif 566.endif 567.if defined(CVS_UPDATE) 568 @echo "--------------------------------------------------------------" 569 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 570 @echo "--------------------------------------------------------------" 571 cd ${.CURDIR}; ${CVS} -q update -A -P -d 572.endif 573 574# 575# most 576# 577# Build most of the user binaries on the existing system libs and includes. 578# 579most: 580 @echo "--------------------------------------------------------------" 581 @echo ">>> Building programs only" 582 @echo "--------------------------------------------------------------" 583.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 584 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 585.endfor 586 587# 588# installmost 589# 590# Install the binaries built by the 'most' target. This does not include 591# libraries or include files. 592# 593installmost: 594 @echo "--------------------------------------------------------------" 595 @echo ">>> Installing programs only" 596 @echo "--------------------------------------------------------------" 597.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 598 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 599.endfor 600 601# 602# ------------------------------------------------------------------------ 603# 604# From here onwards are utility targets used by the 'make world' and 605# related targets. If your 'world' breaks, you may like to try to fix 606# the problem and manually run the following targets to attempt to 607# complete the build. Beware, this is *not* guaranteed to work, you 608# need to have a pretty good grip on the current state of the system 609# to attempt to manually finish it. If in doubt, 'make world' again. 610# 611 612# 613# bootstrap-tools: Build tools needed for compatibility 614# 615.if exists(${.CURDIR}/games) && !defined(NOGAMES) 616_strfile= games/fortune/strfile 617.endif 618 619bootstrap-tools: 620.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \ 621 usr.bin/makewhatis usr.bin/rpcgen usr.bin/uudecode \ 622 usr.bin/xargs usr.bin/xinstall \ 623 usr.sbin/config usr.sbin/kbdcontrol \ 624 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo 625 ${ECHODIR} "===> ${_tool}"; \ 626 cd ${.CURDIR}/${_tool}; \ 627 ${MAKE} DIRPRFX=${_tool}/ obj; \ 628 ${MAKE} DIRPRFX=${_tool}/ depend; \ 629 ${MAKE} DIRPRFX=${_tool}/ all; \ 630 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 631.endfor 632 633# 634# build-tools: Build special purpose build tools 635# 636.if defined(MODULES_WITH_WORLD) && exists(${KRNLSRCDIR}/modules) 637_aicasm= sys/modules/aic7xxx/aicasm 638.endif 639 640.if exists(${.CURDIR}/share) && !defined(NOSHARE) 641_share= share/syscons/scrnmaps 642.endif 643 644.if !defined(NO_FORTRAN) 645_fortran= gnu/usr.bin/cc/f771 646.endif 647 648.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \ 649 !defined(NOCRYPT) && defined(MAKE_KERBEROS4) 650_libroken4= kerberosIV/lib/libroken 651.endif 652 653.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 654 !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 655_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 656 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 657.endif 658 659build-tools: 660.for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \ 661 ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \ 662 ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall 663 ${ECHODIR} "===> ${_tool}"; \ 664 cd ${.CURDIR}/${_tool}; ${MAKE} DIRPRFX=${_tool}/ build-tools 665.endfor 666 667# 668# cross-tools: Build cross-building tools 669# 670.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha" 671_elf2exe= usr.sbin/elf2exe 672.endif 673 674.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 675_btxld= usr.sbin/btxld 676.endif 677 678.if ${TARGET_ARCH} == "sparc64" 679_elf2aout= usr.bin/elf2aout 680.endif 681 682_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint 683 684cross-tools: 685.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \ 686 gnu/usr.bin/binutils usr.sbin/crunch/crunchide \ 687 gnu/usr.bin/cc ${_xlint} 688 ${ECHODIR} "===> ${_tool}"; \ 689 cd ${.CURDIR}/${_tool}; \ 690 ${MAKE} DIRPRFX=${_tool}/ obj; \ 691 ${MAKE} DIRPRFX=${_tool}/ depend; \ 692 ${MAKE} DIRPRFX=${_tool}/ all; \ 693 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 694.endfor 695 696# 697# hierarchy - ensure that all the needed directories are present 698# 699hierarchy: 700 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 701 702# 703# libraries - build all libraries, and install them under ${DESTDIR}. 704# 705# The list of libraries with dependents (${_prebuild_libs}) and their 706# interdependencies (__L) are built automatically by the 707# ${.CURDIR}/tools/make_libdeps.sh script. 708# 709libraries: 710 cd ${.CURDIR}; \ 711 ${MAKE} -f Makefile.inc1 _startup_libs; \ 712 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 713 ${MAKE} -f Makefile.inc1 _generic_libs; 714 715# These dependencies are not automatically generated: 716# 717# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 718# shared libraries for ELF. 719# 720_startup_libs= gnu/lib/csu gnu/lib/libgcc 721.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 722_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 723.else 724_startup_libs+= lib/csu/${MACHINE_ARCH} 725.endif 726 727_prebuild_libs= 728 729_generic_libs= gnu/lib 730 731.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 732_prebuild_libs+= kerberos5/lib/libasn1 733_prebuild_libs+= kerberos5/lib/libgssapi 734_prebuild_libs+= kerberos5/lib/libkrb5 735_prebuild_libs+= kerberos5/lib/libroken 736_generic_libs+= kerberos5/lib 737.endif 738 739.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4) 740_prebuild_libs+= kerberosIV/lib/libkrb 741kerberosIV/lib/libkrb__L: lib/libcrypt__L 742_generic_libs+= kerberosIV/lib 743.endif 744 745_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \ 746 lib/libncurses lib/libopie lib/libpam lib/libradius \ 747 lib/librpcsvc \ 748 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 749 lib/libz lib/msun 750 751lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 752lib/libypclnt__L: lib/librpcsvc__L 753 754_generic_libs+= lib 755 756.if !defined(NOCRYPT) && !defined(NOSECURE) 757.if !defined(NO_OPENSSL) 758_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 759.if !defined(NO_OPENSSH) 760_prebuild_libs+= secure/lib/libssh 761secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 762.endif 763.endif 764_generic_libs+= secure/lib 765.endif 766 767_generic_libs+= usr.bin/lex/lib 768 769.if ${MACHINE_ARCH} == "i386" 770_generic_libs+= usr.sbin/pcvt/keycap 771.endif 772 773.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 774${_lib}__L: .PHONY 775.if exists(${.CURDIR}/${_lib}) 776 ${ECHODIR} "===> ${_lib}"; \ 777 cd ${.CURDIR}/${_lib}; \ 778 ${MAKE} DIRPRFX=${_lib}/ depend; \ 779 ${MAKE} DIRPRFX=${_lib}/ all; \ 780 ${MAKE} DIRPRFX=${_lib}/ install 781.endif 782.endfor 783 784# libpam is special: we need to build static PAM modules before 785# static PAM library, and dynamic PAM library before dynamic PAM 786# modules. 787lib/libpam__L: .PHONY 788 ${ECHODIR} "===> lib/libpam"; \ 789 cd ${.CURDIR}/lib/libpam; \ 790 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 791 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 792 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 793 794_startup_libs: ${_startup_libs:S/$/__L/} 795_prebuild_libs: ${_prebuild_libs:S/$/__L/} 796_generic_libs: ${_generic_libs:S/$/__L/} 797 798.for __target in clean cleandepend cleandir depend includes obj 799.for entry in ${SUBDIR} 800${entry}.${__target}__D: .PHONY 801 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 802 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 803 edir=${entry}.${MACHINE_ARCH}; \ 804 cd ${.CURDIR}/$${edir}; \ 805 else \ 806 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 807 edir=${entry}; \ 808 cd ${.CURDIR}/$${edir}; \ 809 fi; \ 810 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 811.endfor 812par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 813.endfor 814 815.include <bsd.subdir.mk> 816