Makefile.inc1 revision 107515
1# 2# $FreeBSD: head/Makefile.inc1 107515 2002-12-02 14:03:40Z ru $ 3# 4# Make command line options: 5# -DMAKE_KERBEROS4 to build KerberosIV 6# -DMAKE_KERBEROS5 to build Kerberos5 7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 8# -DNOCLEAN do not clean at all 9# -DNOCRYPT will prevent building of crypt versions 10# -DNOPROFILE do not build profiled libraries 11# -DNOSECURE do not go into secure subdir 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4) 65SUBDIR+= kerberosIV 66.endif 67.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 68 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5) 69SUBDIR+= kerberos5 70.endif 71.if exists(${.CURDIR}/libexec) 72SUBDIR+= libexec 73.endif 74.if exists(${.CURDIR}/sbin) 75SUBDIR+= sbin 76.endif 77.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE) 78SUBDIR+= secure 79.endif 80.if exists(${.CURDIR}/share) && !defined(NOSHARE) 81SUBDIR+= share 82.endif 83.if exists(${.CURDIR}/sys) 84SUBDIR+= sys 85.endif 86.if exists(${.CURDIR}/usr.bin) 87SUBDIR+= usr.bin 88.endif 89.if exists(${.CURDIR}/usr.sbin) 90SUBDIR+= usr.sbin 91.endif 92 93# etc must be last for "distribute" to work 94.if exists(${.CURDIR}/etc) 95SUBDIR+= etc 96.endif 97 98# These are last, since it is nice to at least get the base system 99# rebuilt before you do them. 100.if defined(LOCAL_DIRS) 101.for _DIR in ${LOCAL_DIRS} 102.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 103SUBDIR+= ${_DIR} 104.endif 105.endfor 106.endif 107 108.if defined(SUBDIR_OVERRIDE) 109SUBDIR= ${SUBDIR_OVERRIDE} 110.endif 111 112.if defined(NOCLEANDIR) 113CLEANDIR= clean cleandepend 114.else 115CLEANDIR= cleandir 116.endif 117 118CVS?= cvs 119SUP?= /usr/local/bin/cvsup 120SUPFLAGS?= -g -L 2 -P - 121.if defined(SUPHOST) 122SUPFLAGS+= -h ${SUPHOST} 123.endif 124 125MAKEOBJDIRPREFIX?= /usr/obj 126OSRELDATE!= sysctl -n kern.osreldate 127TARGET_ARCH?= ${MACHINE_ARCH} 128.if ${TARGET_ARCH} == ${MACHINE_ARCH} 129TARGET?= ${MACHINE} 130TARGET_CPUTYPE?=${CPUTYPE} 131.else 132TARGET?= ${TARGET_ARCH} 133TARGET_CPUTYPE?= 134.endif 135.if !empty(TARGET_CPUTYPE) 136_TARGET_CPUTYPE=${TARGET_CPUTYPE} 137.else 138_TARGET_CPUTYPE=dummy 139.endif 140_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 141 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 142.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 143.error CPUTYPE global should be set with ?=. 144.endif 145.if make(buildworld) 146BUILD_ARCH!= sysctl -n hw.machine_arch 147.if ${MACHINE_ARCH} != ${BUILD_ARCH} 148.error To cross-build, set TARGET_ARCH. 149.endif 150.endif 151.if ${MACHINE} == ${TARGET} 152OBJTREE= ${MAKEOBJDIRPREFIX} 153.else 154OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 155.endif 156WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 157# /usr/games added for fortune which depend on strfile 158STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 159TMPPATH= ${STRICTTMPPATH}:${PATH} 160 161INSTALLTMP!= /usr/bin/mktemp -d -u -t install 162 163# 164# Building a world goes through the following stages 165# 166# 1. bootstrap-tool stage [BMAKE] 167# This stage is responsible for creating programs that 168# are needed for backward compatibility reasons. They 169# are not built as cross-tools. 170# 2. build-tool stage [TMAKE] 171# This stage is responsible for creating the object 172# tree and building any tools that are needed during 173# the build process. 174# 3. cross-tool stage [XMAKE] 175# This stage is responsible for creating any tools that 176# are needed for cross-builds. A cross-compiler is one 177# of them. 178# 4. world stage [WMAKE] 179# This stage actually builds the world. 180# 5. install stage (optional) [IMAKE] 181# This stage installs a previously built world. 182# 183 184# Common environment for world related stages 185CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 186 MACHINE_ARCH=${TARGET_ARCH} \ 187 MACHINE=${TARGET} \ 188 CPUTYPE=${TARGET_CPUTYPE} \ 189 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \ 190 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \ 191 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac 192 193# bootstrap-tool stage 194BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \ 195 DESTDIR= \ 196 INSTALL="sh ${.CURDIR}/tools/install.sh" 197BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 198 BOOTSTRAPPING=${OSRELDATE} \ 199 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 200 -DNO_CPU_CFLAGS -DNO_WERROR 201 202# build-tool stage 203TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 204 DESTDIR= \ 205 INSTALL="sh ${.CURDIR}/tools/install.sh" 206TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 \ 207 BOOTSTRAPPING=${OSRELDATE} -DNO_CPU_CFLAGS 208 209# cross-tool stage 210XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 211 212# world stage 213WMAKEENV= ${CROSSENV} \ 214 DESTDIR=${WORLDTMP} \ 215 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 216 PATH=${TMPPATH} 217WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 218 219# install stage 220IMAKEENV= ${CROSSENV} \ 221 PATH=${STRICTTMPPATH}:${INSTALLTMP} 222IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 223 224# kernel stage 225KMAKEENV= ${WMAKEENV} 226 227USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \ 228 usr/libexec usr/sbin usr/share/misc \ 229 usr/share/dict \ 230 usr/share/groff_font/devX100 \ 231 usr/share/groff_font/devX100-12 \ 232 usr/share/groff_font/devX75 \ 233 usr/share/groff_font/devX75-12 \ 234 usr/share/groff_font/devascii \ 235 usr/share/groff_font/devcp1047 \ 236 usr/share/groff_font/devdvi \ 237 usr/share/groff_font/devhtml \ 238 usr/share/groff_font/devkoi8-r \ 239 usr/share/groff_font/devlatin1 \ 240 usr/share/groff_font/devlbp \ 241 usr/share/groff_font/devlj4 \ 242 usr/share/groff_font/devps \ 243 usr/share/groff_font/devutf8 \ 244 usr/share/tmac/mdoc usr/share/tmac/mm 245 246INCDIRS= arpa dev fs g++/backward g++/bits g++/ext isc isofs libmilter \ 247 objc openssl protocols readline rpc rpcsvc security ufs 248 249# 250# buildworld 251# 252# Attempt to rebuild the entire system, with reasonable chance of 253# success, regardless of how old your existing system is. 254# 255_worldtmp: 256 @echo 257 @echo "--------------------------------------------------------------" 258 @echo ">>> Rebuilding the temporary build tree" 259 @echo "--------------------------------------------------------------" 260.if !defined(NOCLEAN) 261 rm -rf ${WORLDTMP} 262.else 263 # XXX - These two can depend on any header file. 264 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 265 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 266.endif 267.for _dir in ${USRDIRS} 268 mkdir -p ${WORLDTMP}/${_dir} 269.endfor 270.for _dir in ${INCDIRS} 271 mkdir -p ${WORLDTMP}/usr/include/${_dir} 272.endfor 273 ln -sf ${.CURDIR}/sys ${WORLDTMP} 274_bootstrap-tools: 275 @echo 276 @echo "--------------------------------------------------------------" 277 @echo ">>> stage 1: bootstrap tools" 278 @echo "--------------------------------------------------------------" 279 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 280_cleanobj: 281.if !defined(NOCLEAN) 282 @echo 283 @echo "--------------------------------------------------------------" 284 @echo ">>> stage 2: cleaning up the object tree" 285 @echo "--------------------------------------------------------------" 286 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 287.endif 288_obj: 289 @echo 290 @echo "--------------------------------------------------------------" 291 @echo ">>> stage 2: rebuilding the object tree" 292 @echo "--------------------------------------------------------------" 293 cd ${.CURDIR}; ${WMAKE} par-obj 294_build-tools: 295 @echo 296 @echo "--------------------------------------------------------------" 297 @echo ">>> stage 2: build tools" 298 @echo "--------------------------------------------------------------" 299 cd ${.CURDIR}; ${TMAKE} build-tools 300_cross-tools: 301 @echo 302 @echo "--------------------------------------------------------------" 303 @echo ">>> stage 3: cross tools" 304 @echo "--------------------------------------------------------------" 305 cd ${.CURDIR}; ${XMAKE} cross-tools 306_includes: 307 @echo 308 @echo "--------------------------------------------------------------" 309 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 310 @echo "--------------------------------------------------------------" 311 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 312_libraries: 313 @echo 314 @echo "--------------------------------------------------------------" 315 @echo ">>> stage 4: building libraries" 316 @echo "--------------------------------------------------------------" 317 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 318_depend: 319 @echo 320 @echo "--------------------------------------------------------------" 321 @echo ">>> stage 4: make dependencies" 322 @echo "--------------------------------------------------------------" 323 cd ${.CURDIR}; ${WMAKE} par-depend 324everything: 325 @echo 326 @echo "--------------------------------------------------------------" 327 @echo ">>> stage 4: building everything.." 328 @echo "--------------------------------------------------------------" 329 cd ${.CURDIR}; ${WMAKE} all 330 331 332WMAKE_TGTS= 333.if !defined(SUBDIR_OVERRIDE) 334WMAKE_TGTS+= _worldtmp _bootstrap-tools 335.endif 336WMAKE_TGTS+= _cleanobj _obj _build-tools 337.if !defined(SUBDIR_OVERRIDE) 338WMAKE_TGTS+= _cross-tools 339.endif 340WMAKE_TGTS+= _includes _libraries _depend everything 341 342buildworld: ${WMAKE_TGTS} 343.ORDER: ${WMAKE_TGTS} 344 345# 346# installcheck 347# 348# Checks to be sure system is ready for installworld 349# 350installcheck: 351.if !defined(NO_SENDMAIL) 352 @if ! `grep -q '^smmsp:' /etc/passwd`; then \ 353 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 354 false; \ 355 fi 356 @if ! `grep -q '^smmsp:' /etc/group`; then \ 357 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 358 false; \ 359 fi 360.endif 361.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 362 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 363 @echo "Checking to see if your booted kernel is fresh enough.." 364 ${.OBJDIR}/bin/sh/sh -c \ 365 'echo "Testing installed kernel for new sigaction(2) syscall"' 366 @echo "Seems ok.." 367.endif 368 369# 370# distributeworld 371# 372# Distributes everything compiled by a `buildworld'. 373# 374# installworld 375# 376# Installs everything compiled by a 'buildworld'. 377# 378distributeworld installworld: installcheck 379 mkdir -p ${INSTALLTMP} 380 for prog in [ awk cat chflags chmod chown date echo egrep find grep \ 381 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 382 test true uname wc zic; do \ 383 cp `which $$prog` ${INSTALLTMP}; \ 384 done 385 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 386 rm -rf ${INSTALLTMP} 387 388# 389# reinstall 390# 391# If you have a build server, you can NFS mount the source and obj directories 392# and do a 'make reinstall' on the *client* to install new binaries from the 393# most recent server build. 394# 395reinstall: 396 @echo "--------------------------------------------------------------" 397 @echo ">>> Making hierarchy" 398 @echo "--------------------------------------------------------------" 399 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 400 @echo 401 @echo "--------------------------------------------------------------" 402 @echo ">>> Installing everything.." 403 @echo "--------------------------------------------------------------" 404 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 405.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 406 @echo 407 @echo "--------------------------------------------------------------" 408 @echo ">>> Rebuilding man page indices" 409 @echo "--------------------------------------------------------------" 410 cd ${.CURDIR}/share/man; ${MAKE} makedb 411.endif 412 413redistribute: 414 @echo "--------------------------------------------------------------" 415 @echo ">>> Distributing everything.." 416 @echo "--------------------------------------------------------------" 417 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 418 419# 420# buildkernel and installkernel 421# 422# Which kernels to build and/or install is specified by setting 423# KERNCONF. If not defined a GENERIC kernel is built/installed. 424# Only the existing (depending TARGET) config files are used 425# for building kernels and only the first of these is designated 426# as the one being installed. 427# 428# Note that we have to use TARGET instead of TARGET_ARCH when 429# we're in kernel-land. Since only TARGET_ARCH is (expected) to 430# be set to cross-build, we have to make sure TARGET is set 431# properly. 432 433.if !defined(KERNCONF) && defined(KERNEL) 434KERNCONF= ${KERNEL} 435KERNWARN= yes 436.else 437KERNCONF?= GENERIC 438.endif 439INSTKERNNAME?= kernel 440 441KRNLSRCDIR= ${.CURDIR}/sys 442KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf 443KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 444KERNCONFDIR?= ${KRNLCONFDIR} 445 446BUILDKERNELS= 447INSTALLKERNEL= 448.for _kernel in ${KERNCONF} 449.if exists(${KERNCONFDIR}/${_kernel}) 450BUILDKERNELS+= ${_kernel} 451.if empty(INSTALLKERNEL) 452INSTALLKERNEL= ${_kernel} 453.endif 454.endif 455.endfor 456 457# 458# buildkernel 459# 460# Builds all kernels defined by BUILDKERNELS. 461# 462buildkernel: 463.if empty(BUILDKERNELS) 464 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})." 465 @false 466.endif 467.if defined(KERNWARN) 468 @echo "--------------------------------------------------------------" 469 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 470 @echo "--------------------------------------------------------------" 471 @sleep 3 472.endif 473 @echo 474.for _kernel in ${BUILDKERNELS} 475 @echo "--------------------------------------------------------------" 476 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 477 @echo "--------------------------------------------------------------" 478 @echo "===> ${_kernel}" 479 mkdir -p ${KRNLOBJDIR} 480.if !defined(NO_KERNELCONFIG) 481 cd ${KRNLCONFDIR}; \ 482 PATH=${TMPPATH} \ 483 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 484 ${KERNCONFDIR}/${_kernel} 485.endif 486.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 487 cd ${KRNLOBJDIR}/${_kernel}; \ 488 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean 489.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules) 490 cd ${KRNLOBJDIR}/${_kernel}; \ 491 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir 492.endif 493.endif 494 cd ${KRNLOBJDIR}/${_kernel}; \ 495 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \ 496 ${MAKE} -DNO_CPU_CFLAGS -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile 497.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules) 498 cd ${KRNLOBJDIR}/${_kernel}; \ 499 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} modules-obj 500 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 501 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 502 ${MAKE} -DNO_CPU_CFLAGS depend; \ 503 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 504 ${MAKE} -DNO_CPU_CFLAGS all 505.endif 506.if !defined(NO_KERNELDEPEND) 507 cd ${KRNLOBJDIR}/${_kernel}; \ 508 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 509.endif 510 cd ${KRNLOBJDIR}/${_kernel}; \ 511 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 512 @echo "--------------------------------------------------------------" 513 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 514 @echo "--------------------------------------------------------------" 515.endfor 516 517# 518# installkernel 519# 520# Install the kernel defined by INSTALLKERNEL 521# 522installkernel reinstallkernel: 523 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 524 ${CROSSENV} PATH=${TMPPATH} \ 525 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 526 527# 528# update 529# 530# Update the source tree, by running sup and/or running cvs to update to the 531# latest copy. 532# 533update: 534.if defined(SUP_UPDATE) 535 @echo "--------------------------------------------------------------" 536 @echo ">>> Running ${SUP}" 537 @echo "--------------------------------------------------------------" 538.if defined(SUPFILE) 539 @${SUP} ${SUPFLAGS} ${SUPFILE} 540.endif 541.if defined(SUPFILE1) 542 @${SUP} ${SUPFLAGS} ${SUPFILE1} 543.endif 544.if defined(SUPFILE2) 545 @${SUP} ${SUPFLAGS} ${SUPFILE2} 546.endif 547.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 548 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 549.endif 550.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 551 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 552.endif 553.endif 554.if defined(CVS_UPDATE) 555 @echo "--------------------------------------------------------------" 556 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 557 @echo "--------------------------------------------------------------" 558 cd ${.CURDIR}; ${CVS} -q update -A -P -d 559.endif 560 561# 562# most 563# 564# Build most of the user binaries on the existing system libs and includes. 565# 566most: 567 @echo "--------------------------------------------------------------" 568 @echo ">>> Building programs only" 569 @echo "--------------------------------------------------------------" 570.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 571 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 572.endfor 573 574# 575# installmost 576# 577# Install the binaries built by the 'most' target. This does not include 578# libraries or include files. 579# 580installmost: 581 @echo "--------------------------------------------------------------" 582 @echo ">>> Installing programs only" 583 @echo "--------------------------------------------------------------" 584.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 585 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 586.endfor 587 588# 589# ------------------------------------------------------------------------ 590# 591# From here onwards are utility targets used by the 'make world' and 592# related targets. If your 'world' breaks, you may like to try to fix 593# the problem and manually run the following targets to attempt to 594# complete the build. Beware, this is *not* guaranteed to work, you 595# need to have a pretty good grip on the current state of the system 596# to attempt to manually finish it. If in doubt, 'make world' again. 597# 598 599# 600# bootstrap-tools: Build tools needed for compatibility 601# 602.if exists(${.CURDIR}/games) && !defined(NOGAMES) 603_strfile= games/fortune/strfile 604.endif 605 606bootstrap-tools: 607.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \ 608 usr.bin/makewhatis usr.bin/rpcgen usr.bin/uudecode \ 609 usr.bin/xargs usr.bin/xinstall \ 610 usr.sbin/config usr.sbin/kbdcontrol \ 611 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo 612 ${ECHODIR} "===> ${_tool}"; \ 613 cd ${.CURDIR}/${_tool}; \ 614 ${MAKE} DIRPRFX=${_tool}/ obj; \ 615 ${MAKE} DIRPRFX=${_tool}/ depend; \ 616 ${MAKE} DIRPRFX=${_tool}/ all; \ 617 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 618.endfor 619 620# 621# build-tools: Build special purpose build tools 622# 623.if defined(MODULES_WITH_WORLD) && exists(${KRNLSRCDIR}/modules) 624_aicasm= sys/modules/aic7xxx/aicasm 625.endif 626 627.if exists(${.CURDIR}/share) && !defined(NOSHARE) 628_share= share/syscons/scrnmaps 629.endif 630 631.if !defined(NO_FORTRAN) 632_fortran= gnu/usr.bin/cc/f771 633.endif 634 635.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \ 636 !defined(NOCRYPT) && defined(MAKE_KERBEROS4) 637_libroken4= kerberosIV/lib/libroken 638.endif 639 640.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 641 !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 642_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 643 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 644.endif 645 646build-tools: 647.for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \ 648 ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \ 649 ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall 650 ${ECHODIR} "===> ${_tool}"; \ 651 cd ${.CURDIR}/${_tool}; ${MAKE} DIRPRFX=${_tool}/ build-tools 652.endfor 653 654# 655# cross-tools: Build cross-building tools 656# 657.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha" 658_elf2exe= usr.sbin/elf2exe 659.endif 660 661.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 662_btxld= usr.sbin/btxld 663.endif 664 665.if ${TARGET_ARCH} == "sparc64" 666_elf2aout= usr.sbin/elf2aout 667.endif 668 669_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint 670 671cross-tools: 672.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \ 673 gnu/usr.bin/binutils usr.sbin/crunch/crunchide \ 674 gnu/usr.bin/cc ${_xlint} 675 ${ECHODIR} "===> ${_tool}"; \ 676 cd ${.CURDIR}/${_tool}; \ 677 ${MAKE} DIRPRFX=${_tool}/ obj; \ 678 ${MAKE} DIRPRFX=${_tool}/ depend; \ 679 ${MAKE} DIRPRFX=${_tool}/ all; \ 680 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 681.endfor 682 683# 684# hierarchy - ensure that all the needed directories are present 685# 686hierarchy: 687 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 688 689# 690# libraries - build all libraries, and install them under ${DESTDIR}. 691# 692# The list of libraries with dependents (${_prebuild_libs}) and their 693# interdependencies (__L) are built automatically by the 694# ${.CURDIR}/tools/make_libdeps.sh script. 695# 696libraries: 697 cd ${.CURDIR}; \ 698 ${MAKE} -f Makefile.inc1 _startup_libs; \ 699 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 700 ${MAKE} -f Makefile.inc1 _generic_libs; 701 702# These dependencies are not automatically generated: 703# 704# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 705# shared libraries for ELF. 706# 707_startup_libs= gnu/lib/csu gnu/lib/libgcc 708.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 709_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 710.else 711_startup_libs+= lib/csu/${MACHINE_ARCH} 712.endif 713 714_prebuild_libs= 715 716_generic_libs= gnu/lib 717 718.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 719_prebuild_libs+= kerberos5/lib/libasn1 720_prebuild_libs+= kerberos5/lib/libgssapi 721_prebuild_libs+= kerberos5/lib/libkrb5 722_prebuild_libs+= kerberos5/lib/libroken 723_generic_libs+= kerberos5/lib 724.endif 725 726.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4) 727_prebuild_libs+= kerberosIV/lib/libkrb 728kerberosIV/lib/libkrb__L: lib/libcrypt__L 729_generic_libs+= kerberosIV/lib 730.endif 731 732_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \ 733 lib/libncurses lib/libopie lib/libpam lib/libradius \ 734 lib/librpcsvc \ 735 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 736 lib/libz lib/msun 737 738lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 739lib/libypclnt__L: lib/librpcsvc__L 740 741_generic_libs+= lib 742 743.if !defined(NOCRYPT) && !defined(NOSECURE) 744.if !defined(NO_OPENSSL) 745_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 746.if !defined(NO_OPENSSH) 747_prebuild_libs+= secure/lib/libssh 748secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 749.endif 750.endif 751_generic_libs+= secure/lib 752.endif 753 754_generic_libs+= usr.bin/lex/lib 755 756.if ${MACHINE_ARCH} == "i386" 757_generic_libs+= usr.sbin/pcvt/keycap 758.endif 759 760.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 761${_lib}__L: .PHONY 762.if exists(${.CURDIR}/${_lib}) 763 ${ECHODIR} "===> ${_lib}"; \ 764 cd ${.CURDIR}/${_lib}; \ 765 ${MAKE} DIRPRFX=${_lib}/ depend; \ 766 ${MAKE} DIRPRFX=${_lib}/ all; \ 767 ${MAKE} DIRPRFX=${_lib}/ install 768.endif 769.endfor 770 771# libpam is special: we need to build static PAM modules before 772# static PAM library, and dynamic PAM library before dynamic PAM 773# modules. 774lib/libpam__L: .PHONY 775 ${ECHODIR} "===> lib/libpam"; \ 776 cd ${.CURDIR}/lib/libpam; \ 777 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 778 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 779 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 780 781_startup_libs: ${_startup_libs:S/$/__L/} 782_prebuild_libs: ${_prebuild_libs:S/$/__L/} 783_generic_libs: ${_generic_libs:S/$/__L/} 784 785.for __target in clean cleandepend cleandir depend includes obj 786.for entry in ${SUBDIR} 787${entry}.${__target}__D: .PHONY 788 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 789 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 790 edir=${entry}.${MACHINE_ARCH}; \ 791 cd ${.CURDIR}/$${edir}; \ 792 else \ 793 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 794 edir=${entry}; \ 795 cd ${.CURDIR}/$${edir}; \ 796 fi; \ 797 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 798.endfor 799par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 800.endfor 801 802.include <bsd.subdir.mk> 803