ata_kauai.c revision 200171 
1/*-
2 * Copyright 2004 by Peter Grehan. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 * 1. Redistributions of source code must retain the above copyright
8 *    notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 *    notice, this list of conditions and the following disclaimer in the
11 *    documentation and/or other materials provided with the distribution.
12 * 3. The name of the author may not be used to endorse or promote products
13 *    derived from this software without specific prior written permission.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
21 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
22 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 */
28#include <sys/cdefs.h>
29__FBSDID("$FreeBSD: head/sys/powerpc/powermac/ata_kauai.c 200171 2009-12-06 00:10:13Z mav $");
30
31/*
32 * Mac 'Kauai' PCI ATA controller
33 */
34#include "opt_ata.h"
35#include <sys/param.h>
36#include <sys/systm.h>
37#include <sys/kernel.h>
38#include <sys/module.h>
39#include <sys/bus.h>
40#include <sys/malloc.h>
41#include <sys/sema.h>
42#include <sys/taskqueue.h>
43#include <vm/uma.h>
44#include <machine/stdarg.h>
45#include <machine/resource.h>
46#include <machine/bus.h>
47#include <sys/rman.h>
48#include <sys/ata.h>
49#include <dev/ata/ata-all.h>
50#include <ata_if.h>
51
52#include <dev/ofw/openfirm.h>
53#include <dev/ofw/ofw_bus.h>
54#include <machine/intr_machdep.h>
55
56#include <dev/pci/pcivar.h>
57#include <dev/pci/pcireg.h>
58
59#include "ata_dbdma.h"
60
61#define  ATA_KAUAI_REGOFFSET	0x2000
62#define  ATA_KAUAI_DBDMAOFFSET	0x1000
63
64/*
65 * Offset to alt-control register from base
66 */
67#define  ATA_KAUAI_ALTOFFSET    (ATA_KAUAI_REGOFFSET + 0x160)
68
69/*
70 * Define the gap between registers
71 */
72#define ATA_KAUAI_REGGAP        16
73
74/*
75 * PIO and DMA access registers
76 */
77#define PIO_CONFIG_REG	(ATA_KAUAI_REGOFFSET + 0x200)
78#define UDMA_CONFIG_REG	(ATA_KAUAI_REGOFFSET + 0x210)
79#define DMA_IRQ_REG	(ATA_KAUAI_REGOFFSET + 0x300)
80
81#define USE_DBDMA_IRQ	0
82
83/*
84 * Define the kauai pci bus attachment.
85 */
86static  int  ata_kauai_probe(device_t dev);
87static  int  ata_kauai_attach(device_t dev);
88static  int  ata_kauai_setmode(device_t dev, int target, int mode);
89static  int  ata_kauai_begin_transaction(struct ata_request *request);
90
91static device_method_t ata_kauai_methods[] = {
92        /* Device interface */
93	DEVMETHOD(device_probe,		ata_kauai_probe),
94	DEVMETHOD(device_attach,	ata_kauai_attach),
95	DEVMETHOD(device_detach,	bus_generic_detach),
96	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
97	DEVMETHOD(device_suspend,	bus_generic_suspend),
98	DEVMETHOD(device_resume,	bus_generic_resume),
99
100	/* ATA interface */
101	DEVMETHOD(ata_setmode,		ata_kauai_setmode),
102	{ 0, 0 }
103};
104
105struct ata_kauai_softc {
106	struct ata_dbdma_channel sc_ch;
107
108	struct resource *sc_memr;
109
110	int shasta;
111
112	uint32_t udmaconf[2];
113	uint32_t wdmaconf[2];
114	uint32_t pioconf[2];
115};
116
117static driver_t ata_kauai_driver = {
118	"ata",
119	ata_kauai_methods,
120	sizeof(struct ata_kauai_softc),
121};
122
123DRIVER_MODULE(ata, pci, ata_kauai_driver, ata_devclass, 0, 0);
124MODULE_DEPEND(ata, ata, 1, 1, 1);
125
126/*
127 * PCI ID search table
128 */
129static struct kauai_pci_dev {
130        u_int32_t  kpd_devid;
131        char    *kpd_desc;
132} kauai_pci_devlist[] = {
133        { 0x0033106b, "Uninorth2 Kauai ATA Controller" },
134        { 0x003b106b, "Intrepid Kauai ATA Controller" },
135        { 0x0043106b, "K2 Kauai ATA Controller" },
136        { 0x0050106b, "Shasta Kauai ATA Controller" },
137        { 0x0069106b, "Intrepid-2 Kauai ATA Controller" },
138        { 0, NULL }
139};
140
141/*
142 * IDE transfer timings
143 */
144#define KAUAI_PIO_MASK	0xff000fff
145#define KAUAI_DMA_MASK	0x00fff000
146#define KAUAI_UDMA_MASK	0x0000ffff
147
148static const u_int pio_timing_kauai[] = {
149	0x08000a92,	/* PIO0 */
150	0x0800060f,	/* PIO1 */
151	0x0800038b,	/* PIO2 */
152	0x05000249,	/* PIO3 */
153	0x04000148	/* PIO4 */
154};
155static const u_int pio_timing_shasta[] = {
156	0x0a000c97,	/* PIO0 */
157	0x07000712,	/* PIO1 */
158	0x040003cd,	/* PIO2 */
159	0x0400028b,	/* PIO3 */
160	0x0400010a	/* PIO4 */
161};
162
163static const u_int dma_timing_kauai[] = {
164        0x00618000,	/* WDMA0 */
165        0x00209000,	/* WDMA1 */
166        0x00148000	/* WDMA2 */
167};
168static const u_int dma_timing_shasta[] = {
169        0x00820800,	/* WDMA0 */
170        0x0028b000,	/* WDMA1 */
171        0x001ca000	/* WDMA2 */
172};
173
174static const u_int udma_timing_kauai[] = {
175        0x000070c1,	/* UDMA0 */
176        0x00005d81,	/* UDMA1 */
177        0x00004a61,	/* UDMA2 */
178        0x00003a51,	/* UDMA3 */
179        0x00002a31,	/* UDMA4 */
180        0x00002921	/* UDMA5 */
181};
182static const u_int udma_timing_shasta[] = {
183        0x00035901,	/* UDMA0 */
184        0x000348b1,	/* UDMA1 */
185        0x00033881,	/* UDMA2 */
186        0x00033861,	/* UDMA3 */
187        0x00033841,	/* UDMA4 */
188        0x00033031,	/* UDMA5 */
189        0x00033021	/* UDMA6 */
190};
191
192static int
193ata_kauai_probe(device_t dev)
194{
195	struct ata_channel *ch;
196	struct ata_kauai_softc *sc;
197	u_int32_t devid;
198	phandle_t node;
199	const char *compatstring = NULL;
200	int i, found, rid;
201
202	found = 0;
203	devid = pci_get_devid(dev);
204        for (i = 0; kauai_pci_devlist[i].kpd_desc != NULL; i++) {
205                if (devid == kauai_pci_devlist[i].kpd_devid) {
206			found = 1;
207                        device_set_desc(dev, kauai_pci_devlist[i].kpd_desc);
208		}
209	}
210
211	if (!found)
212		return (ENXIO);
213
214	node = ofw_bus_get_node(dev);
215	sc = device_get_softc(dev);
216	bzero(sc, sizeof(struct ata_kauai_softc));
217	ch = &sc->sc_ch.sc_ch;
218
219	compatstring = ofw_bus_get_compat(dev);
220	if (compatstring != NULL && strcmp(compatstring,"shasta-ata") == 0)
221		sc->shasta = 1;
222
223	/* Regular Kauai controllers apparently need this hack */
224	if (!sc->shasta)
225		bus_set_resource(dev, SYS_RES_IRQ, 0, 39, 1);
226
227        rid = PCIR_BARS;
228	sc->sc_memr = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
229	    RF_ACTIVE);
230        if (sc->sc_memr == NULL) {
231                device_printf(dev, "could not allocate memory\n");
232                return (ENXIO);
233        }
234
235	/*
236	 * Set up the resource vectors
237	 */
238        for (i = ATA_DATA; i <= ATA_COMMAND; i++) {
239                ch->r_io[i].res = sc->sc_memr;
240                ch->r_io[i].offset = i*ATA_KAUAI_REGGAP + ATA_KAUAI_REGOFFSET;
241        }
242        ch->r_io[ATA_CONTROL].res = sc->sc_memr;
243        ch->r_io[ATA_CONTROL].offset = ATA_KAUAI_ALTOFFSET;
244	ata_default_registers(dev);
245
246        ch->unit = 0;
247        ch->flags |= ATA_USE_16BIT;
248	ata_generic_hw(dev);
249
250        return (ata_probe(dev));
251}
252
253#if USE_DBDMA_IRQ
254static int
255ata_kauai_dma_interrupt(struct ata_kauai_softc *sc)
256{
257	/* Clear the DMA interrupt bits */
258
259	bus_write_4(sc->sc_memr, DMA_IRQ_REG, 0x80000000);
260
261	return ata_interrupt(sc);
262}
263#endif
264
265static int
266ata_kauai_attach(device_t dev)
267{
268	struct ata_kauai_softc *sc = device_get_softc(dev);
269#if USE_DBDMA_IRQ
270	int dbdma_irq_rid = 1;
271	struct resource *dbdma_irq;
272	void *cookie;
273#endif
274
275	pci_enable_busmaster(dev);
276
277	/* Init DMA engine */
278
279	sc->sc_ch.dbdma_rid = 1;
280	sc->sc_ch.dbdma_regs = sc->sc_memr;
281	sc->sc_ch.dbdma_offset = ATA_KAUAI_DBDMAOFFSET;
282
283	ata_dbdma_dmainit(dev);
284
285#if USE_DBDMA_IRQ
286	/* Bind to DBDMA interrupt as well */
287	if ((dbdma_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
288	    &dbdma_irq_rid, RF_SHAREABLE | RF_ACTIVE)) != NULL) {
289		bus_setup_intr(dev, dbdma_irq, ATA_INTR_FLAGS, NULL,
290		    (driver_intr_t *)ata_kauai_dma_interrupt, sc,&cookie);
291	}
292#endif
293
294	/* Set up initial mode */
295	sc->pioconf[0] = sc->pioconf[1] =
296	    bus_read_4(sc->sc_memr, PIO_CONFIG_REG) & 0x0f000fff;
297
298	sc->udmaconf[0] = sc->udmaconf[1] = 0;
299	sc->wdmaconf[0] = sc->wdmaconf[1] = 0;
300
301	/* Magic FCR value from Apple */
302	bus_write_4(sc->sc_memr, 0, 0x00000007);
303
304	/* Set begin_transaction */
305	sc->sc_ch.sc_ch.hw.begin_transaction = ata_kauai_begin_transaction;
306
307	return ata_attach(dev);
308}
309
310static int
311ata_kauai_setmode(device_t dev, int target, int mode)
312{
313	struct ata_kauai_softc *sc = device_get_softc(dev);
314
315	mode = min(mode,sc->shasta ? ATA_UDMA6 : ATA_UDMA5);
316
317	if (sc->shasta) {
318		switch (mode & ATA_DMA_MASK) {
319		    case ATA_UDMA0:
320			sc->udmaconf[target]
321			    = udma_timing_shasta[mode & ATA_MODE_MASK];
322			break;
323		    case ATA_WDMA0:
324			sc->udmaconf[target] = 0;
325			sc->wdmaconf[target]
326			    = dma_timing_shasta[mode & ATA_MODE_MASK];
327			break;
328		    default:
329			sc->pioconf[target]
330			    = pio_timing_shasta[(mode & ATA_MODE_MASK) -
331			    ATA_PIO0];
332			break;
333		}
334	} else {
335		switch (mode & ATA_DMA_MASK) {
336		    case ATA_UDMA0:
337			sc->udmaconf[target]
338			    = udma_timing_kauai[mode & ATA_MODE_MASK];
339			break;
340		    case ATA_WDMA0:
341			sc->udmaconf[target] = 0;
342			sc->wdmaconf[target]
343			    = dma_timing_kauai[mode & ATA_MODE_MASK];
344			break;
345		    default:
346			sc->pioconf[target]
347			    = pio_timing_kauai[(mode & ATA_MODE_MASK)
348			    - ATA_PIO0];
349			break;
350		}
351	}
352
353	return (mode);
354}
355
356static int
357ata_kauai_begin_transaction(struct ata_request *request)
358{
359	struct ata_kauai_softc *sc = device_get_softc(request->parent);
360
361	bus_write_4(sc->sc_memr, UDMA_CONFIG_REG, sc->udmaconf[request->unit]);
362	bus_write_4(sc->sc_memr, PIO_CONFIG_REG,
363	    sc->wdmaconf[request->unit] | sc->pioconf[request->unit]);
364
365	return ata_begin_transaction(request);
366}
367
368