servconf.h revision 126277 
1/*	$OpenBSD: servconf.h,v 1.67 2003/12/23 16:12:10 jakob Exp $	*/
2/*	$FreeBSD: head/crypto/openssh/servconf.h 126277 2004-02-26 10:52:33Z des $	*/
3
4/*
5 * Author: Tatu Ylonen <ylo@cs.hut.fi>
6 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
7 *                    All rights reserved
8 * Definitions for server configuration data and for the functions reading it.
9 *
10 * As far as I am concerned, the code I have written for this software
11 * can be used freely for any purpose.  Any derived versions of this
12 * software must be clearly marked as such, and if the derived work is
13 * incompatible with the protocol description in the RFC file, it must be
14 * called by a name other than "ssh" or "Secure Shell".
15 */
16
17#ifndef SERVCONF_H
18#define SERVCONF_H
19
20#define MAX_PORTS		256	/* Max # ports. */
21
22#define MAX_ALLOW_USERS		256	/* Max # users on allow list. */
23#define MAX_DENY_USERS		256	/* Max # users on deny list. */
24#define MAX_ALLOW_GROUPS	256	/* Max # groups on allow list. */
25#define MAX_DENY_GROUPS		256	/* Max # groups on deny list. */
26#define MAX_SUBSYSTEMS		256	/* Max # subsystems. */
27#define MAX_HOSTKEYS		256	/* Max # hostkeys. */
28
29/* permit_root_login */
30#define	PERMIT_NOT_SET		-1
31#define	PERMIT_NO		0
32#define	PERMIT_FORCED_ONLY	1
33#define	PERMIT_NO_PASSWD	2
34#define	PERMIT_YES		3
35
36
37typedef struct {
38	u_int num_ports;
39	u_int ports_from_cmdline;
40	u_short ports[MAX_PORTS];	/* Port number to listen on. */
41	char   *listen_addr;		/* Address on which the server listens. */
42	struct addrinfo *listen_addrs;	/* Addresses on which the server listens. */
43	char   *host_key_files[MAX_HOSTKEYS];	/* Files containing host keys. */
44	int     num_host_key_files;     /* Number of files for host keys. */
45	char   *pid_file;	/* Where to put our pid */
46	int     server_key_bits;/* Size of the server key. */
47	int     login_grace_time;	/* Disconnect if no auth in this time
48					 * (sec). */
49	int     key_regeneration_time;	/* Server key lifetime (seconds). */
50	int     permit_root_login;	/* PERMIT_*, see above */
51	int     ignore_rhosts;	/* Ignore .rhosts and .shosts. */
52	int     ignore_user_known_hosts;	/* Ignore ~/.ssh/known_hosts
53						 * for RhostsRsaAuth */
54	int     print_motd;	/* If true, print /etc/motd. */
55	int	print_lastlog;	/* If true, print lastlog */
56	int     x11_forwarding;	/* If true, permit inet (spoofing) X11 fwd. */
57	int     x11_display_offset;	/* What DISPLAY number to start
58					 * searching at */
59	int     x11_use_localhost;	/* If true, use localhost for fake X11 server. */
60	char   *xauth_location;	/* Location of xauth program */
61	int     strict_modes;	/* If true, require string home dir modes. */
62	int     tcp_keep_alive;	/* If true, set SO_KEEPALIVE. */
63	char   *ciphers;	/* Supported SSH2 ciphers. */
64	char   *macs;		/* Supported SSH2 macs. */
65	int	protocol;	/* Supported protocol versions. */
66	int     gateway_ports;	/* If true, allow remote connects to forwarded ports. */
67	SyslogFacility log_facility;	/* Facility for system logging. */
68	LogLevel log_level;	/* Level for system logging. */
69	int     rhosts_rsa_authentication;	/* If true, permit rhosts RSA
70						 * authentication. */
71	int     hostbased_authentication;	/* If true, permit ssh2 hostbased auth */
72	int     hostbased_uses_name_from_packet_only; /* experimental */
73	int     rsa_authentication;	/* If true, permit RSA authentication. */
74	int     pubkey_authentication;	/* If true, permit ssh2 pubkey authentication. */
75	int     kerberos_authentication;	/* If true, permit Kerberos
76						 * authentication. */
77	int     kerberos_or_local_passwd;	/* If true, permit kerberos
78						 * and any other password
79						 * authentication mechanism,
80						 * such as SecurID or
81						 * /etc/passwd */
82	int     kerberos_ticket_cleanup;	/* If true, destroy ticket
83						 * file on logout. */
84	int     kerberos_get_afs_token;		/* If true, try to get AFS token if
85						 * authenticated with Kerberos. */
86	int     gss_authentication;	/* If true, permit GSSAPI authentication */
87	int     gss_cleanup_creds;	/* If true, destroy cred cache on logout */
88	int     password_authentication;	/* If true, permit password
89						 * authentication. */
90	int     kbd_interactive_authentication;	/* If true, permit */
91	int     challenge_response_authentication;
92	int     permit_empty_passwd;	/* If false, do not permit empty
93					 * passwords. */
94	int     permit_user_env;	/* If true, read ~/.ssh/environment */
95	int     use_login;	/* If true, login(1) is used */
96	int     compression;	/* If true, compression is allowed */
97	int	allow_tcp_forwarding;
98	u_int num_allow_users;
99	char   *allow_users[MAX_ALLOW_USERS];
100	u_int num_deny_users;
101	char   *deny_users[MAX_DENY_USERS];
102	u_int num_allow_groups;
103	char   *allow_groups[MAX_ALLOW_GROUPS];
104	u_int num_deny_groups;
105	char   *deny_groups[MAX_DENY_GROUPS];
106
107	u_int num_subsystems;
108	char   *subsystem_name[MAX_SUBSYSTEMS];
109	char   *subsystem_command[MAX_SUBSYSTEMS];
110
111	int	max_startups_begin;
112	int	max_startups_rate;
113	int	max_startups;
114	char   *banner;			/* SSH-2 banner message */
115	int	use_dns;
116	int	client_alive_interval;	/*
117					 * poke the client this often to
118					 * see if it's still there
119					 */
120	int	client_alive_count_max;	/*
121					 * If the client is unresponsive
122					 * for this many intervals above,
123					 * disconnect the session
124					 */
125
126	char   *authorized_keys_file;	/* File containing public keys */
127	char   *authorized_keys_file2;
128	int	use_pam;		/* Enable auth via PAM */
129}       ServerOptions;
130
131void	 initialize_server_options(ServerOptions *);
132void	 read_server_config(ServerOptions *, const char *);
133void	 fill_default_server_options(ServerOptions *);
134int	 process_server_config_line(ServerOptions *, char *, const char *, int);
135
136
137#endif				/* SERVCONF_H */
138