packet.c revision 157016
1/*
2 * Author: Tatu Ylonen <ylo@cs.hut.fi>
3 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
4 *                    All rights reserved
5 * This file contains code implementing the packet protocol and communication
6 * with the other side.  This same code is used both on client and server side.
7 *
8 * As far as I am concerned, the code I have written for this software
9 * can be used freely for any purpose.  Any derived versions of this
10 * software must be clearly marked as such, and if the derived work is
11 * incompatible with the protocol description in the RFC file, it must be
12 * called by a name other than "ssh" or "Secure Shell".
13 *
14 *
15 * SSH2 packet format added by Markus Friedl.
16 * Copyright (c) 2000, 2001 Markus Friedl.  All rights reserved.
17 *
18 * Redistribution and use in source and binary forms, with or without
19 * modification, are permitted provided that the following conditions
20 * are met:
21 * 1. Redistributions of source code must retain the above copyright
22 *    notice, this list of conditions and the following disclaimer.
23 * 2. Redistributions in binary form must reproduce the above copyright
24 *    notice, this list of conditions and the following disclaimer in the
25 *    documentation and/or other materials provided with the distribution.
26 *
27 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
28 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
29 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
30 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
31 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
32 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
36 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 */
38
39#include "includes.h"
40RCSID("$OpenBSD: packet.c,v 1.120 2005/10/30 08:52:17 djm Exp $");
41
42#include "openbsd-compat/sys-queue.h"
43
44#include "xmalloc.h"
45#include "buffer.h"
46#include "packet.h"
47#include "bufaux.h"
48#include "crc32.h"
49#include "getput.h"
50
51#include "compress.h"
52#include "deattack.h"
53#include "channels.h"
54
55#include "compat.h"
56#include "ssh1.h"
57#include "ssh2.h"
58
59#include "cipher.h"
60#include "kex.h"
61#include "mac.h"
62#include "log.h"
63#include "canohost.h"
64#include "misc.h"
65#include "ssh.h"
66
67#ifdef PACKET_DEBUG
68#define DBG(x) x
69#else
70#define DBG(x)
71#endif
72
73/*
74 * This variable contains the file descriptors used for communicating with
75 * the other side.  connection_in is used for reading; connection_out for
76 * writing.  These can be the same descriptor, in which case it is assumed to
77 * be a socket.
78 */
79static int connection_in = -1;
80static int connection_out = -1;
81
82/* Protocol flags for the remote side. */
83static u_int remote_protocol_flags = 0;
84
85/* Encryption context for receiving data.  This is only used for decryption. */
86static CipherContext receive_context;
87
88/* Encryption context for sending data.  This is only used for encryption. */
89static CipherContext send_context;
90
91/* Buffer for raw input data from the socket. */
92Buffer input;
93
94/* Buffer for raw output data going to the socket. */
95Buffer output;
96
97/* Buffer for the partial outgoing packet being constructed. */
98static Buffer outgoing_packet;
99
100/* Buffer for the incoming packet currently being processed. */
101static Buffer incoming_packet;
102
103/* Scratch buffer for packet compression/decompression. */
104static Buffer compression_buffer;
105static int compression_buffer_ready = 0;
106
107/* Flag indicating whether packet compression/decompression is enabled. */
108static int packet_compression = 0;
109
110/* default maximum packet size */
111u_int max_packet_size = 32768;
112
113/* Flag indicating whether this module has been initialized. */
114static int initialized = 0;
115
116/* Set to true if the connection is interactive. */
117static int interactive_mode = 0;
118
119/* Set to true if we are the server side. */
120static int server_side = 0;
121
122/* Set to true if we are authenticated. */
123static int after_authentication = 0;
124
125/* Session key information for Encryption and MAC */
126Newkeys *newkeys[MODE_MAX];
127static struct packet_state {
128	u_int32_t seqnr;
129	u_int32_t packets;
130	u_int64_t blocks;
131} p_read, p_send;
132
133static u_int64_t max_blocks_in, max_blocks_out;
134static u_int32_t rekey_limit;
135
136/* Session key for protocol v1 */
137static u_char ssh1_key[SSH_SESSION_KEY_LENGTH];
138static u_int ssh1_keylen;
139
140/* roundup current message to extra_pad bytes */
141static u_char extra_pad = 0;
142
143struct packet {
144	TAILQ_ENTRY(packet) next;
145	u_char type;
146	Buffer payload;
147};
148TAILQ_HEAD(, packet) outgoing;
149
150/*
151 * Sets the descriptors used for communication.  Disables encryption until
152 * packet_set_encryption_key is called.
153 */
154void
155packet_set_connection(int fd_in, int fd_out)
156{
157	Cipher *none = cipher_by_name("none");
158
159	if (none == NULL)
160		fatal("packet_set_connection: cannot load cipher 'none'");
161	connection_in = fd_in;
162	connection_out = fd_out;
163	cipher_init(&send_context, none, (const u_char *)"",
164	    0, NULL, 0, CIPHER_ENCRYPT);
165	cipher_init(&receive_context, none, (const u_char *)"",
166	    0, NULL, 0, CIPHER_DECRYPT);
167	newkeys[MODE_IN] = newkeys[MODE_OUT] = NULL;
168	if (!initialized) {
169		initialized = 1;
170		buffer_init(&input);
171		buffer_init(&output);
172		buffer_init(&outgoing_packet);
173		buffer_init(&incoming_packet);
174		TAILQ_INIT(&outgoing);
175	}
176}
177
178/* Returns 1 if remote host is connected via socket, 0 if not. */
179
180int
181packet_connection_is_on_socket(void)
182{
183	struct sockaddr_storage from, to;
184	socklen_t fromlen, tolen;
185
186	/* filedescriptors in and out are the same, so it's a socket */
187	if (connection_in == connection_out)
188		return 1;
189	fromlen = sizeof(from);
190	memset(&from, 0, sizeof(from));
191	if (getpeername(connection_in, (struct sockaddr *)&from, &fromlen) < 0)
192		return 0;
193	tolen = sizeof(to);
194	memset(&to, 0, sizeof(to));
195	if (getpeername(connection_out, (struct sockaddr *)&to, &tolen) < 0)
196		return 0;
197	if (fromlen != tolen || memcmp(&from, &to, fromlen) != 0)
198		return 0;
199	if (from.ss_family != AF_INET && from.ss_family != AF_INET6)
200		return 0;
201	return 1;
202}
203
204/*
205 * Exports an IV from the CipherContext required to export the key
206 * state back from the unprivileged child to the privileged parent
207 * process.
208 */
209
210void
211packet_get_keyiv(int mode, u_char *iv, u_int len)
212{
213	CipherContext *cc;
214
215	if (mode == MODE_OUT)
216		cc = &send_context;
217	else
218		cc = &receive_context;
219
220	cipher_get_keyiv(cc, iv, len);
221}
222
223int
224packet_get_keycontext(int mode, u_char *dat)
225{
226	CipherContext *cc;
227
228	if (mode == MODE_OUT)
229		cc = &send_context;
230	else
231		cc = &receive_context;
232
233	return (cipher_get_keycontext(cc, dat));
234}
235
236void
237packet_set_keycontext(int mode, u_char *dat)
238{
239	CipherContext *cc;
240
241	if (mode == MODE_OUT)
242		cc = &send_context;
243	else
244		cc = &receive_context;
245
246	cipher_set_keycontext(cc, dat);
247}
248
249int
250packet_get_keyiv_len(int mode)
251{
252	CipherContext *cc;
253
254	if (mode == MODE_OUT)
255		cc = &send_context;
256	else
257		cc = &receive_context;
258
259	return (cipher_get_keyiv_len(cc));
260}
261void
262packet_set_iv(int mode, u_char *dat)
263{
264	CipherContext *cc;
265
266	if (mode == MODE_OUT)
267		cc = &send_context;
268	else
269		cc = &receive_context;
270
271	cipher_set_keyiv(cc, dat);
272}
273int
274packet_get_ssh1_cipher(void)
275{
276	return (cipher_get_number(receive_context.cipher));
277}
278
279void
280packet_get_state(int mode, u_int32_t *seqnr, u_int64_t *blocks, u_int32_t *packets)
281{
282	struct packet_state *state;
283
284	state = (mode == MODE_IN) ? &p_read : &p_send;
285	*seqnr = state->seqnr;
286	*blocks = state->blocks;
287	*packets = state->packets;
288}
289
290void
291packet_set_state(int mode, u_int32_t seqnr, u_int64_t blocks, u_int32_t packets)
292{
293	struct packet_state *state;
294
295	state = (mode == MODE_IN) ? &p_read : &p_send;
296	state->seqnr = seqnr;
297	state->blocks = blocks;
298	state->packets = packets;
299}
300
301/* returns 1 if connection is via ipv4 */
302
303int
304packet_connection_is_ipv4(void)
305{
306	struct sockaddr_storage to;
307	socklen_t tolen = sizeof(to);
308
309	memset(&to, 0, sizeof(to));
310	if (getsockname(connection_out, (struct sockaddr *)&to, &tolen) < 0)
311		return 0;
312	if (to.ss_family == AF_INET)
313		return 1;
314#ifdef IPV4_IN_IPV6
315	if (to.ss_family == AF_INET6 &&
316	    IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)&to)->sin6_addr))
317		return 1;
318#endif
319	return 0;
320}
321
322/* Sets the connection into non-blocking mode. */
323
324void
325packet_set_nonblocking(void)
326{
327	/* Set the socket into non-blocking mode. */
328	set_nonblock(connection_in);
329
330	if (connection_out != connection_in)
331		set_nonblock(connection_out);
332}
333
334/* Returns the socket used for reading. */
335
336int
337packet_get_connection_in(void)
338{
339	return connection_in;
340}
341
342/* Returns the descriptor used for writing. */
343
344int
345packet_get_connection_out(void)
346{
347	return connection_out;
348}
349
350/* Closes the connection and clears and frees internal data structures. */
351
352void
353packet_close(void)
354{
355	if (!initialized)
356		return;
357	initialized = 0;
358	if (connection_in == connection_out) {
359		shutdown(connection_out, SHUT_RDWR);
360		close(connection_out);
361	} else {
362		close(connection_in);
363		close(connection_out);
364	}
365	buffer_free(&input);
366	buffer_free(&output);
367	buffer_free(&outgoing_packet);
368	buffer_free(&incoming_packet);
369	if (compression_buffer_ready) {
370		buffer_free(&compression_buffer);
371		buffer_compress_uninit();
372	}
373	cipher_cleanup(&send_context);
374	cipher_cleanup(&receive_context);
375}
376
377/* Sets remote side protocol flags. */
378
379void
380packet_set_protocol_flags(u_int protocol_flags)
381{
382	remote_protocol_flags = protocol_flags;
383}
384
385/* Returns the remote protocol flags set earlier by the above function. */
386
387u_int
388packet_get_protocol_flags(void)
389{
390	return remote_protocol_flags;
391}
392
393/*
394 * Starts packet compression from the next packet on in both directions.
395 * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip.
396 */
397
398static void
399packet_init_compression(void)
400{
401	if (compression_buffer_ready == 1)
402		return;
403	compression_buffer_ready = 1;
404	buffer_init(&compression_buffer);
405}
406
407void
408packet_start_compression(int level)
409{
410	if (packet_compression && !compat20)
411		fatal("Compression already enabled.");
412	packet_compression = 1;
413	packet_init_compression();
414	buffer_compress_init_send(level);
415	buffer_compress_init_recv();
416}
417
418/*
419 * Causes any further packets to be encrypted using the given key.  The same
420 * key is used for both sending and reception.  However, both directions are
421 * encrypted independently of each other.
422 */
423
424void
425packet_set_encryption_key(const u_char *key, u_int keylen,
426    int number)
427{
428	Cipher *cipher = cipher_by_number(number);
429
430	if (cipher == NULL)
431		fatal("packet_set_encryption_key: unknown cipher number %d", number);
432	if (keylen < 20)
433		fatal("packet_set_encryption_key: keylen too small: %d", keylen);
434	if (keylen > SSH_SESSION_KEY_LENGTH)
435		fatal("packet_set_encryption_key: keylen too big: %d", keylen);
436	memcpy(ssh1_key, key, keylen);
437	ssh1_keylen = keylen;
438	cipher_init(&send_context, cipher, key, keylen, NULL, 0, CIPHER_ENCRYPT);
439	cipher_init(&receive_context, cipher, key, keylen, NULL, 0, CIPHER_DECRYPT);
440}
441
442u_int
443packet_get_encryption_key(u_char *key)
444{
445	if (key == NULL)
446		return (ssh1_keylen);
447	memcpy(key, ssh1_key, ssh1_keylen);
448	return (ssh1_keylen);
449}
450
451/* Start constructing a packet to send. */
452void
453packet_start(u_char type)
454{
455	u_char buf[9];
456	int len;
457
458	DBG(debug("packet_start[%d]", type));
459	len = compat20 ? 6 : 9;
460	memset(buf, 0, len - 1);
461	buf[len - 1] = type;
462	buffer_clear(&outgoing_packet);
463	buffer_append(&outgoing_packet, buf, len);
464}
465
466/* Append payload. */
467void
468packet_put_char(int value)
469{
470	char ch = value;
471
472	buffer_append(&outgoing_packet, &ch, 1);
473}
474void
475packet_put_int(u_int value)
476{
477	buffer_put_int(&outgoing_packet, value);
478}
479void
480packet_put_string(const void *buf, u_int len)
481{
482	buffer_put_string(&outgoing_packet, buf, len);
483}
484void
485packet_put_cstring(const char *str)
486{
487	buffer_put_cstring(&outgoing_packet, str);
488}
489void
490packet_put_raw(const void *buf, u_int len)
491{
492	buffer_append(&outgoing_packet, buf, len);
493}
494void
495packet_put_bignum(BIGNUM * value)
496{
497	buffer_put_bignum(&outgoing_packet, value);
498}
499void
500packet_put_bignum2(BIGNUM * value)
501{
502	buffer_put_bignum2(&outgoing_packet, value);
503}
504
505/*
506 * Finalizes and sends the packet.  If the encryption key has been set,
507 * encrypts the packet before sending.
508 */
509
510static void
511packet_send1(void)
512{
513	u_char buf[8], *cp;
514	int i, padding, len;
515	u_int checksum;
516	u_int32_t rnd = 0;
517
518	/*
519	 * If using packet compression, compress the payload of the outgoing
520	 * packet.
521	 */
522	if (packet_compression) {
523		buffer_clear(&compression_buffer);
524		/* Skip padding. */
525		buffer_consume(&outgoing_packet, 8);
526		/* padding */
527		buffer_append(&compression_buffer, "\0\0\0\0\0\0\0\0", 8);
528		buffer_compress(&outgoing_packet, &compression_buffer);
529		buffer_clear(&outgoing_packet);
530		buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
531		    buffer_len(&compression_buffer));
532	}
533	/* Compute packet length without padding (add checksum, remove padding). */
534	len = buffer_len(&outgoing_packet) + 4 - 8;
535
536	/* Insert padding. Initialized to zero in packet_start1() */
537	padding = 8 - len % 8;
538	if (!send_context.plaintext) {
539		cp = buffer_ptr(&outgoing_packet);
540		for (i = 0; i < padding; i++) {
541			if (i % 4 == 0)
542				rnd = arc4random();
543			cp[7 - i] = rnd & 0xff;
544			rnd >>= 8;
545		}
546	}
547	buffer_consume(&outgoing_packet, 8 - padding);
548
549	/* Add check bytes. */
550	checksum = ssh_crc32(buffer_ptr(&outgoing_packet),
551	    buffer_len(&outgoing_packet));
552	PUT_32BIT(buf, checksum);
553	buffer_append(&outgoing_packet, buf, 4);
554
555#ifdef PACKET_DEBUG
556	fprintf(stderr, "packet_send plain: ");
557	buffer_dump(&outgoing_packet);
558#endif
559
560	/* Append to output. */
561	PUT_32BIT(buf, len);
562	buffer_append(&output, buf, 4);
563	cp = buffer_append_space(&output, buffer_len(&outgoing_packet));
564	cipher_crypt(&send_context, cp, buffer_ptr(&outgoing_packet),
565	    buffer_len(&outgoing_packet));
566
567#ifdef PACKET_DEBUG
568	fprintf(stderr, "encrypted: ");
569	buffer_dump(&output);
570#endif
571
572	buffer_clear(&outgoing_packet);
573
574	/*
575	 * Note that the packet is now only buffered in output.  It won't be
576	 * actually sent until packet_write_wait or packet_write_poll is
577	 * called.
578	 */
579}
580
581void
582set_newkeys(int mode)
583{
584	Enc *enc;
585	Mac *mac;
586	Comp *comp;
587	CipherContext *cc;
588	u_int64_t *max_blocks;
589	int crypt_type;
590
591	debug2("set_newkeys: mode %d", mode);
592
593	if (mode == MODE_OUT) {
594		cc = &send_context;
595		crypt_type = CIPHER_ENCRYPT;
596		p_send.packets = p_send.blocks = 0;
597		max_blocks = &max_blocks_out;
598	} else {
599		cc = &receive_context;
600		crypt_type = CIPHER_DECRYPT;
601		p_read.packets = p_read.blocks = 0;
602		max_blocks = &max_blocks_in;
603	}
604	if (newkeys[mode] != NULL) {
605		debug("set_newkeys: rekeying");
606		cipher_cleanup(cc);
607		enc  = &newkeys[mode]->enc;
608		mac  = &newkeys[mode]->mac;
609		comp = &newkeys[mode]->comp;
610		memset(mac->key, 0, mac->key_len);
611		xfree(enc->name);
612		xfree(enc->iv);
613		xfree(enc->key);
614		xfree(mac->name);
615		xfree(mac->key);
616		xfree(comp->name);
617		xfree(newkeys[mode]);
618	}
619	newkeys[mode] = kex_get_newkeys(mode);
620	if (newkeys[mode] == NULL)
621		fatal("newkeys: no keys for mode %d", mode);
622	enc  = &newkeys[mode]->enc;
623	mac  = &newkeys[mode]->mac;
624	comp = &newkeys[mode]->comp;
625	if (mac->md != NULL)
626		mac->enabled = 1;
627	DBG(debug("cipher_init_context: %d", mode));
628	cipher_init(cc, enc->cipher, enc->key, enc->key_len,
629	    enc->iv, enc->block_size, crypt_type);
630	/* Deleting the keys does not gain extra security */
631	/* memset(enc->iv,  0, enc->block_size);
632	   memset(enc->key, 0, enc->key_len); */
633	if ((comp->type == COMP_ZLIB ||
634	    (comp->type == COMP_DELAYED && after_authentication)) &&
635	    comp->enabled == 0) {
636		packet_init_compression();
637		if (mode == MODE_OUT)
638			buffer_compress_init_send(6);
639		else
640			buffer_compress_init_recv();
641		comp->enabled = 1;
642	}
643	/*
644	 * The 2^(blocksize*2) limit is too expensive for 3DES,
645	 * blowfish, etc, so enforce a 1GB limit for small blocksizes.
646	 */
647	if (enc->block_size >= 16)
648		*max_blocks = (u_int64_t)1 << (enc->block_size*2);
649	else
650		*max_blocks = ((u_int64_t)1 << 30) / enc->block_size;
651	if (rekey_limit)
652		*max_blocks = MIN(*max_blocks, rekey_limit / enc->block_size);
653}
654
655/*
656 * Delayed compression for SSH2 is enabled after authentication:
657 * This happans on the server side after a SSH2_MSG_USERAUTH_SUCCESS is sent,
658 * and on the client side after a SSH2_MSG_USERAUTH_SUCCESS is received.
659 */
660static void
661packet_enable_delayed_compress(void)
662{
663	Comp *comp = NULL;
664	int mode;
665
666	/*
667	 * Remember that we are past the authentication step, so rekeying
668	 * with COMP_DELAYED will turn on compression immediately.
669	 */
670	after_authentication = 1;
671	for (mode = 0; mode < MODE_MAX; mode++) {
672		comp = &newkeys[mode]->comp;
673		if (comp && !comp->enabled && comp->type == COMP_DELAYED) {
674			packet_init_compression();
675			if (mode == MODE_OUT)
676				buffer_compress_init_send(6);
677			else
678				buffer_compress_init_recv();
679			comp->enabled = 1;
680		}
681	}
682}
683
684/*
685 * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue)
686 */
687static void
688packet_send2_wrapped(void)
689{
690	u_char type, *cp, *macbuf = NULL;
691	u_char padlen, pad;
692	u_int packet_length = 0;
693	u_int i, len;
694	u_int32_t rnd = 0;
695	Enc *enc   = NULL;
696	Mac *mac   = NULL;
697	Comp *comp = NULL;
698	int block_size;
699
700	if (newkeys[MODE_OUT] != NULL) {
701		enc  = &newkeys[MODE_OUT]->enc;
702		mac  = &newkeys[MODE_OUT]->mac;
703		comp = &newkeys[MODE_OUT]->comp;
704	}
705	block_size = enc ? enc->block_size : 8;
706
707	cp = buffer_ptr(&outgoing_packet);
708	type = cp[5];
709
710#ifdef PACKET_DEBUG
711	fprintf(stderr, "plain:     ");
712	buffer_dump(&outgoing_packet);
713#endif
714
715	if (comp && comp->enabled) {
716		len = buffer_len(&outgoing_packet);
717		/* skip header, compress only payload */
718		buffer_consume(&outgoing_packet, 5);
719		buffer_clear(&compression_buffer);
720		buffer_compress(&outgoing_packet, &compression_buffer);
721		buffer_clear(&outgoing_packet);
722		buffer_append(&outgoing_packet, "\0\0\0\0\0", 5);
723		buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
724		    buffer_len(&compression_buffer));
725		DBG(debug("compression: raw %d compressed %d", len,
726		    buffer_len(&outgoing_packet)));
727	}
728
729	/* sizeof (packet_len + pad_len + payload) */
730	len = buffer_len(&outgoing_packet);
731
732	/*
733	 * calc size of padding, alloc space, get random data,
734	 * minimum padding is 4 bytes
735	 */
736	padlen = block_size - (len % block_size);
737	if (padlen < 4)
738		padlen += block_size;
739	if (extra_pad) {
740		/* will wrap if extra_pad+padlen > 255 */
741		extra_pad  = roundup(extra_pad, block_size);
742		pad = extra_pad - ((len + padlen) % extra_pad);
743		debug3("packet_send2: adding %d (len %d padlen %d extra_pad %d)",
744		    pad, len, padlen, extra_pad);
745		padlen += pad;
746		extra_pad = 0;
747	}
748	cp = buffer_append_space(&outgoing_packet, padlen);
749	if (enc && !send_context.plaintext) {
750		/* random padding */
751		for (i = 0; i < padlen; i++) {
752			if (i % 4 == 0)
753				rnd = arc4random();
754			cp[i] = rnd & 0xff;
755			rnd >>= 8;
756		}
757	} else {
758		/* clear padding */
759		memset(cp, 0, padlen);
760	}
761	/* packet_length includes payload, padding and padding length field */
762	packet_length = buffer_len(&outgoing_packet) - 4;
763	cp = buffer_ptr(&outgoing_packet);
764	PUT_32BIT(cp, packet_length);
765	cp[4] = padlen;
766	DBG(debug("send: len %d (includes padlen %d)", packet_length+4, padlen));
767
768	/* compute MAC over seqnr and packet(length fields, payload, padding) */
769	if (mac && mac->enabled) {
770		macbuf = mac_compute(mac, p_send.seqnr,
771		    buffer_ptr(&outgoing_packet),
772		    buffer_len(&outgoing_packet));
773		DBG(debug("done calc MAC out #%d", p_send.seqnr));
774	}
775	/* encrypt packet and append to output buffer. */
776	cp = buffer_append_space(&output, buffer_len(&outgoing_packet));
777	cipher_crypt(&send_context, cp, buffer_ptr(&outgoing_packet),
778	    buffer_len(&outgoing_packet));
779	/* append unencrypted MAC */
780	if (mac && mac->enabled)
781		buffer_append(&output, (char *)macbuf, mac->mac_len);
782#ifdef PACKET_DEBUG
783	fprintf(stderr, "encrypted: ");
784	buffer_dump(&output);
785#endif
786	/* increment sequence number for outgoing packets */
787	if (++p_send.seqnr == 0)
788		logit("outgoing seqnr wraps around");
789	if (++p_send.packets == 0)
790		if (!(datafellows & SSH_BUG_NOREKEY))
791			fatal("XXX too many packets with same key");
792	p_send.blocks += (packet_length + 4) / block_size;
793	buffer_clear(&outgoing_packet);
794
795	if (type == SSH2_MSG_NEWKEYS)
796		set_newkeys(MODE_OUT);
797	else if (type == SSH2_MSG_USERAUTH_SUCCESS && server_side)
798		packet_enable_delayed_compress();
799}
800
801static void
802packet_send2(void)
803{
804	static int rekeying = 0;
805	struct packet *p;
806	u_char type, *cp;
807
808	cp = buffer_ptr(&outgoing_packet);
809	type = cp[5];
810
811	/* during rekeying we can only send key exchange messages */
812	if (rekeying) {
813		if (!((type >= SSH2_MSG_TRANSPORT_MIN) &&
814		    (type <= SSH2_MSG_TRANSPORT_MAX))) {
815			debug("enqueue packet: %u", type);
816			p = xmalloc(sizeof(*p));
817			p->type = type;
818			memcpy(&p->payload, &outgoing_packet, sizeof(Buffer));
819			buffer_init(&outgoing_packet);
820			TAILQ_INSERT_TAIL(&outgoing, p, next);
821			return;
822		}
823	}
824
825	/* rekeying starts with sending KEXINIT */
826	if (type == SSH2_MSG_KEXINIT)
827		rekeying = 1;
828
829	packet_send2_wrapped();
830
831	/* after a NEWKEYS message we can send the complete queue */
832	if (type == SSH2_MSG_NEWKEYS) {
833		rekeying = 0;
834		while ((p = TAILQ_FIRST(&outgoing))) {
835			type = p->type;
836			debug("dequeue packet: %u", type);
837			buffer_free(&outgoing_packet);
838			memcpy(&outgoing_packet, &p->payload,
839			    sizeof(Buffer));
840			TAILQ_REMOVE(&outgoing, p, next);
841			xfree(p);
842			packet_send2_wrapped();
843		}
844	}
845}
846
847void
848packet_send(void)
849{
850	if (compat20)
851		packet_send2();
852	else
853		packet_send1();
854	DBG(debug("packet_send done"));
855}
856
857/*
858 * Waits until a packet has been received, and returns its type.  Note that
859 * no other data is processed until this returns, so this function should not
860 * be used during the interactive session.
861 */
862
863int
864packet_read_seqnr(u_int32_t *seqnr_p)
865{
866	int type, len;
867	fd_set *setp;
868	char buf[8192];
869	DBG(debug("packet_read()"));
870
871	setp = (fd_set *)xmalloc(howmany(connection_in+1, NFDBITS) *
872	    sizeof(fd_mask));
873
874	/* Since we are blocking, ensure that all written packets have been sent. */
875	packet_write_wait();
876
877	/* Stay in the loop until we have received a complete packet. */
878	for (;;) {
879		/* Try to read a packet from the buffer. */
880		type = packet_read_poll_seqnr(seqnr_p);
881		if (!compat20 && (
882		    type == SSH_SMSG_SUCCESS
883		    || type == SSH_SMSG_FAILURE
884		    || type == SSH_CMSG_EOF
885		    || type == SSH_CMSG_EXIT_CONFIRMATION))
886			packet_check_eom();
887		/* If we got a packet, return it. */
888		if (type != SSH_MSG_NONE) {
889			xfree(setp);
890			return type;
891		}
892		/*
893		 * Otherwise, wait for some data to arrive, add it to the
894		 * buffer, and try again.
895		 */
896		memset(setp, 0, howmany(connection_in + 1, NFDBITS) *
897		    sizeof(fd_mask));
898		FD_SET(connection_in, setp);
899
900		/* Wait for some data to arrive. */
901		while (select(connection_in + 1, setp, NULL, NULL, NULL) == -1 &&
902		    (errno == EAGAIN || errno == EINTR))
903			;
904
905		/* Read data from the socket. */
906		len = read(connection_in, buf, sizeof(buf));
907		if (len == 0) {
908			logit("Connection closed by %.200s", get_remote_ipaddr());
909			cleanup_exit(255);
910		}
911		if (len < 0)
912			fatal("Read from socket failed: %.100s", strerror(errno));
913		/* Append it to the buffer. */
914		packet_process_incoming(buf, len);
915	}
916	/* NOTREACHED */
917}
918
919int
920packet_read(void)
921{
922	return packet_read_seqnr(NULL);
923}
924
925/*
926 * Waits until a packet has been received, verifies that its type matches
927 * that given, and gives a fatal error and exits if there is a mismatch.
928 */
929
930void
931packet_read_expect(int expected_type)
932{
933	int type;
934
935	type = packet_read();
936	if (type != expected_type)
937		packet_disconnect("Protocol error: expected packet type %d, got %d",
938		    expected_type, type);
939}
940
941/* Checks if a full packet is available in the data received so far via
942 * packet_process_incoming.  If so, reads the packet; otherwise returns
943 * SSH_MSG_NONE.  This does not wait for data from the connection.
944 *
945 * SSH_MSG_DISCONNECT is handled specially here.  Also,
946 * SSH_MSG_IGNORE messages are skipped by this function and are never returned
947 * to higher levels.
948 */
949
950static int
951packet_read_poll1(void)
952{
953	u_int len, padded_len;
954	u_char *cp, type;
955	u_int checksum, stored_checksum;
956
957	/* Check if input size is less than minimum packet size. */
958	if (buffer_len(&input) < 4 + 8)
959		return SSH_MSG_NONE;
960	/* Get length of incoming packet. */
961	cp = buffer_ptr(&input);
962	len = GET_32BIT(cp);
963	if (len < 1 + 2 + 2 || len > 256 * 1024)
964		packet_disconnect("Bad packet length %u.", len);
965	padded_len = (len + 8) & ~7;
966
967	/* Check if the packet has been entirely received. */
968	if (buffer_len(&input) < 4 + padded_len)
969		return SSH_MSG_NONE;
970
971	/* The entire packet is in buffer. */
972
973	/* Consume packet length. */
974	buffer_consume(&input, 4);
975
976	/*
977	 * Cryptographic attack detector for ssh
978	 * (C)1998 CORE-SDI, Buenos Aires Argentina
979	 * Ariel Futoransky(futo@core-sdi.com)
980	 */
981	if (!receive_context.plaintext &&
982	    detect_attack(buffer_ptr(&input), padded_len, NULL) == DEATTACK_DETECTED)
983		packet_disconnect("crc32 compensation attack: network attack detected");
984
985	/* Decrypt data to incoming_packet. */
986	buffer_clear(&incoming_packet);
987	cp = buffer_append_space(&incoming_packet, padded_len);
988	cipher_crypt(&receive_context, cp, buffer_ptr(&input), padded_len);
989
990	buffer_consume(&input, padded_len);
991
992#ifdef PACKET_DEBUG
993	fprintf(stderr, "read_poll plain: ");
994	buffer_dump(&incoming_packet);
995#endif
996
997	/* Compute packet checksum. */
998	checksum = ssh_crc32(buffer_ptr(&incoming_packet),
999	    buffer_len(&incoming_packet) - 4);
1000
1001	/* Skip padding. */
1002	buffer_consume(&incoming_packet, 8 - len % 8);
1003
1004	/* Test check bytes. */
1005	if (len != buffer_len(&incoming_packet))
1006		packet_disconnect("packet_read_poll1: len %d != buffer_len %d.",
1007		    len, buffer_len(&incoming_packet));
1008
1009	cp = (u_char *)buffer_ptr(&incoming_packet) + len - 4;
1010	stored_checksum = GET_32BIT(cp);
1011	if (checksum != stored_checksum)
1012		packet_disconnect("Corrupted check bytes on input.");
1013	buffer_consume_end(&incoming_packet, 4);
1014
1015	if (packet_compression) {
1016		buffer_clear(&compression_buffer);
1017		buffer_uncompress(&incoming_packet, &compression_buffer);
1018		buffer_clear(&incoming_packet);
1019		buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
1020		    buffer_len(&compression_buffer));
1021	}
1022	type = buffer_get_char(&incoming_packet);
1023	if (type < SSH_MSG_MIN || type > SSH_MSG_MAX)
1024		packet_disconnect("Invalid ssh1 packet type: %d", type);
1025	return type;
1026}
1027
1028static int
1029packet_read_poll2(u_int32_t *seqnr_p)
1030{
1031	static u_int packet_length = 0;
1032	u_int padlen, need;
1033	u_char *macbuf, *cp, type;
1034	u_int maclen, block_size;
1035	Enc *enc   = NULL;
1036	Mac *mac   = NULL;
1037	Comp *comp = NULL;
1038
1039	if (newkeys[MODE_IN] != NULL) {
1040		enc  = &newkeys[MODE_IN]->enc;
1041		mac  = &newkeys[MODE_IN]->mac;
1042		comp = &newkeys[MODE_IN]->comp;
1043	}
1044	maclen = mac && mac->enabled ? mac->mac_len : 0;
1045	block_size = enc ? enc->block_size : 8;
1046
1047	if (packet_length == 0) {
1048		/*
1049		 * check if input size is less than the cipher block size,
1050		 * decrypt first block and extract length of incoming packet
1051		 */
1052		if (buffer_len(&input) < block_size)
1053			return SSH_MSG_NONE;
1054		buffer_clear(&incoming_packet);
1055		cp = buffer_append_space(&incoming_packet, block_size);
1056		cipher_crypt(&receive_context, cp, buffer_ptr(&input),
1057		    block_size);
1058		cp = buffer_ptr(&incoming_packet);
1059		packet_length = GET_32BIT(cp);
1060		if (packet_length < 1 + 4 || packet_length > 256 * 1024) {
1061#ifdef PACKET_DEBUG
1062			buffer_dump(&incoming_packet);
1063#endif
1064			packet_disconnect("Bad packet length %u.", packet_length);
1065		}
1066		DBG(debug("input: packet len %u", packet_length+4));
1067		buffer_consume(&input, block_size);
1068	}
1069	/* we have a partial packet of block_size bytes */
1070	need = 4 + packet_length - block_size;
1071	DBG(debug("partial packet %d, need %d, maclen %d", block_size,
1072	    need, maclen));
1073	if (need % block_size != 0)
1074		fatal("padding error: need %d block %d mod %d",
1075		    need, block_size, need % block_size);
1076	/*
1077	 * check if the entire packet has been received and
1078	 * decrypt into incoming_packet
1079	 */
1080	if (buffer_len(&input) < need + maclen)
1081		return SSH_MSG_NONE;
1082#ifdef PACKET_DEBUG
1083	fprintf(stderr, "read_poll enc/full: ");
1084	buffer_dump(&input);
1085#endif
1086	cp = buffer_append_space(&incoming_packet, need);
1087	cipher_crypt(&receive_context, cp, buffer_ptr(&input), need);
1088	buffer_consume(&input, need);
1089	/*
1090	 * compute MAC over seqnr and packet,
1091	 * increment sequence number for incoming packet
1092	 */
1093	if (mac && mac->enabled) {
1094		macbuf = mac_compute(mac, p_read.seqnr,
1095		    buffer_ptr(&incoming_packet),
1096		    buffer_len(&incoming_packet));
1097		if (memcmp(macbuf, buffer_ptr(&input), mac->mac_len) != 0)
1098			packet_disconnect("Corrupted MAC on input.");
1099		DBG(debug("MAC #%d ok", p_read.seqnr));
1100		buffer_consume(&input, mac->mac_len);
1101	}
1102	if (seqnr_p != NULL)
1103		*seqnr_p = p_read.seqnr;
1104	if (++p_read.seqnr == 0)
1105		logit("incoming seqnr wraps around");
1106	if (++p_read.packets == 0)
1107		if (!(datafellows & SSH_BUG_NOREKEY))
1108			fatal("XXX too many packets with same key");
1109	p_read.blocks += (packet_length + 4) / block_size;
1110
1111	/* get padlen */
1112	cp = buffer_ptr(&incoming_packet);
1113	padlen = cp[4];
1114	DBG(debug("input: padlen %d", padlen));
1115	if (padlen < 4)
1116		packet_disconnect("Corrupted padlen %d on input.", padlen);
1117
1118	/* skip packet size + padlen, discard padding */
1119	buffer_consume(&incoming_packet, 4 + 1);
1120	buffer_consume_end(&incoming_packet, padlen);
1121
1122	DBG(debug("input: len before de-compress %d", buffer_len(&incoming_packet)));
1123	if (comp && comp->enabled) {
1124		buffer_clear(&compression_buffer);
1125		buffer_uncompress(&incoming_packet, &compression_buffer);
1126		buffer_clear(&incoming_packet);
1127		buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
1128		    buffer_len(&compression_buffer));
1129		DBG(debug("input: len after de-compress %d",
1130		    buffer_len(&incoming_packet)));
1131	}
1132	/*
1133	 * get packet type, implies consume.
1134	 * return length of payload (without type field)
1135	 */
1136	type = buffer_get_char(&incoming_packet);
1137	if (type < SSH2_MSG_MIN || type >= SSH2_MSG_LOCAL_MIN)
1138		packet_disconnect("Invalid ssh2 packet type: %d", type);
1139	if (type == SSH2_MSG_NEWKEYS)
1140		set_newkeys(MODE_IN);
1141	else if (type == SSH2_MSG_USERAUTH_SUCCESS && !server_side)
1142		packet_enable_delayed_compress();
1143#ifdef PACKET_DEBUG
1144	fprintf(stderr, "read/plain[%d]:\r\n", type);
1145	buffer_dump(&incoming_packet);
1146#endif
1147	/* reset for next packet */
1148	packet_length = 0;
1149	return type;
1150}
1151
1152int
1153packet_read_poll_seqnr(u_int32_t *seqnr_p)
1154{
1155	u_int reason, seqnr;
1156	u_char type;
1157	char *msg;
1158
1159	for (;;) {
1160		if (compat20) {
1161			type = packet_read_poll2(seqnr_p);
1162			if (type)
1163				DBG(debug("received packet type %d", type));
1164			switch (type) {
1165			case SSH2_MSG_IGNORE:
1166				break;
1167			case SSH2_MSG_DEBUG:
1168				packet_get_char();
1169				msg = packet_get_string(NULL);
1170				debug("Remote: %.900s", msg);
1171				xfree(msg);
1172				msg = packet_get_string(NULL);
1173				xfree(msg);
1174				break;
1175			case SSH2_MSG_DISCONNECT:
1176				reason = packet_get_int();
1177				msg = packet_get_string(NULL);
1178				logit("Received disconnect from %s: %u: %.400s",
1179				    get_remote_ipaddr(), reason, msg);
1180				xfree(msg);
1181				cleanup_exit(255);
1182				break;
1183			case SSH2_MSG_UNIMPLEMENTED:
1184				seqnr = packet_get_int();
1185				debug("Received SSH2_MSG_UNIMPLEMENTED for %u",
1186				    seqnr);
1187				break;
1188			default:
1189				return type;
1190				break;
1191			}
1192		} else {
1193			type = packet_read_poll1();
1194			switch (type) {
1195			case SSH_MSG_IGNORE:
1196				break;
1197			case SSH_MSG_DEBUG:
1198				msg = packet_get_string(NULL);
1199				debug("Remote: %.900s", msg);
1200				xfree(msg);
1201				break;
1202			case SSH_MSG_DISCONNECT:
1203				msg = packet_get_string(NULL);
1204				logit("Received disconnect from %s: %.400s",
1205				    get_remote_ipaddr(), msg);
1206				cleanup_exit(255);
1207				xfree(msg);
1208				break;
1209			default:
1210				if (type)
1211					DBG(debug("received packet type %d", type));
1212				return type;
1213				break;
1214			}
1215		}
1216	}
1217}
1218
1219int
1220packet_read_poll(void)
1221{
1222	return packet_read_poll_seqnr(NULL);
1223}
1224
1225/*
1226 * Buffers the given amount of input characters.  This is intended to be used
1227 * together with packet_read_poll.
1228 */
1229
1230void
1231packet_process_incoming(const char *buf, u_int len)
1232{
1233	buffer_append(&input, buf, len);
1234}
1235
1236/* Returns a character from the packet. */
1237
1238u_int
1239packet_get_char(void)
1240{
1241	char ch;
1242
1243	buffer_get(&incoming_packet, &ch, 1);
1244	return (u_char) ch;
1245}
1246
1247/* Returns an integer from the packet data. */
1248
1249u_int
1250packet_get_int(void)
1251{
1252	return buffer_get_int(&incoming_packet);
1253}
1254
1255/*
1256 * Returns an arbitrary precision integer from the packet data.  The integer
1257 * must have been initialized before this call.
1258 */
1259
1260void
1261packet_get_bignum(BIGNUM * value)
1262{
1263	buffer_get_bignum(&incoming_packet, value);
1264}
1265
1266void
1267packet_get_bignum2(BIGNUM * value)
1268{
1269	buffer_get_bignum2(&incoming_packet, value);
1270}
1271
1272void *
1273packet_get_raw(u_int *length_ptr)
1274{
1275	u_int bytes = buffer_len(&incoming_packet);
1276
1277	if (length_ptr != NULL)
1278		*length_ptr = bytes;
1279	return buffer_ptr(&incoming_packet);
1280}
1281
1282int
1283packet_remaining(void)
1284{
1285	return buffer_len(&incoming_packet);
1286}
1287
1288/*
1289 * Returns a string from the packet data.  The string is allocated using
1290 * xmalloc; it is the responsibility of the calling program to free it when
1291 * no longer needed.  The length_ptr argument may be NULL, or point to an
1292 * integer into which the length of the string is stored.
1293 */
1294
1295void *
1296packet_get_string(u_int *length_ptr)
1297{
1298	return buffer_get_string(&incoming_packet, length_ptr);
1299}
1300
1301/*
1302 * Sends a diagnostic message from the server to the client.  This message
1303 * can be sent at any time (but not while constructing another message). The
1304 * message is printed immediately, but only if the client is being executed
1305 * in verbose mode.  These messages are primarily intended to ease debugging
1306 * authentication problems.   The length of the formatted message must not
1307 * exceed 1024 bytes.  This will automatically call packet_write_wait.
1308 */
1309
1310void
1311packet_send_debug(const char *fmt,...)
1312{
1313	char buf[1024];
1314	va_list args;
1315
1316	if (compat20 && (datafellows & SSH_BUG_DEBUG))
1317		return;
1318
1319	va_start(args, fmt);
1320	vsnprintf(buf, sizeof(buf), fmt, args);
1321	va_end(args);
1322
1323	if (compat20) {
1324		packet_start(SSH2_MSG_DEBUG);
1325		packet_put_char(0);	/* bool: always display */
1326		packet_put_cstring(buf);
1327		packet_put_cstring("");
1328	} else {
1329		packet_start(SSH_MSG_DEBUG);
1330		packet_put_cstring(buf);
1331	}
1332	packet_send();
1333	packet_write_wait();
1334}
1335
1336/*
1337 * Logs the error plus constructs and sends a disconnect packet, closes the
1338 * connection, and exits.  This function never returns. The error message
1339 * should not contain a newline.  The length of the formatted message must
1340 * not exceed 1024 bytes.
1341 */
1342
1343void
1344packet_disconnect(const char *fmt,...)
1345{
1346	char buf[1024];
1347	va_list args;
1348	static int disconnecting = 0;
1349
1350	if (disconnecting)	/* Guard against recursive invocations. */
1351		fatal("packet_disconnect called recursively.");
1352	disconnecting = 1;
1353
1354	/*
1355	 * Format the message.  Note that the caller must make sure the
1356	 * message is of limited size.
1357	 */
1358	va_start(args, fmt);
1359	vsnprintf(buf, sizeof(buf), fmt, args);
1360	va_end(args);
1361
1362	/* Display the error locally */
1363	logit("Disconnecting: %.100s", buf);
1364
1365	/* Send the disconnect message to the other side, and wait for it to get sent. */
1366	if (compat20) {
1367		packet_start(SSH2_MSG_DISCONNECT);
1368		packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR);
1369		packet_put_cstring(buf);
1370		packet_put_cstring("");
1371	} else {
1372		packet_start(SSH_MSG_DISCONNECT);
1373		packet_put_cstring(buf);
1374	}
1375	packet_send();
1376	packet_write_wait();
1377
1378	/* Stop listening for connections. */
1379	channel_close_all();
1380
1381	/* Close the connection. */
1382	packet_close();
1383	cleanup_exit(255);
1384}
1385
1386/* Checks if there is any buffered output, and tries to write some of the output. */
1387
1388void
1389packet_write_poll(void)
1390{
1391	int len = buffer_len(&output);
1392
1393	if (len > 0) {
1394		len = write(connection_out, buffer_ptr(&output), len);
1395		if (len <= 0) {
1396			if (errno == EAGAIN)
1397				return;
1398			else
1399				fatal("Write failed: %.100s", strerror(errno));
1400		}
1401		buffer_consume(&output, len);
1402	}
1403}
1404
1405/*
1406 * Calls packet_write_poll repeatedly until all pending output data has been
1407 * written.
1408 */
1409
1410void
1411packet_write_wait(void)
1412{
1413	fd_set *setp;
1414
1415	setp = (fd_set *)xmalloc(howmany(connection_out + 1, NFDBITS) *
1416	    sizeof(fd_mask));
1417	packet_write_poll();
1418	while (packet_have_data_to_write()) {
1419		memset(setp, 0, howmany(connection_out + 1, NFDBITS) *
1420		    sizeof(fd_mask));
1421		FD_SET(connection_out, setp);
1422		while (select(connection_out + 1, NULL, setp, NULL, NULL) == -1 &&
1423		    (errno == EAGAIN || errno == EINTR))
1424			;
1425		packet_write_poll();
1426	}
1427	xfree(setp);
1428}
1429
1430/* Returns true if there is buffered data to write to the connection. */
1431
1432int
1433packet_have_data_to_write(void)
1434{
1435	return buffer_len(&output) != 0;
1436}
1437
1438/* Returns true if there is not too much data to write to the connection. */
1439
1440int
1441packet_not_very_much_data_to_write(void)
1442{
1443	if (interactive_mode)
1444		return buffer_len(&output) < 16384;
1445	else
1446		return buffer_len(&output) < 128 * 1024;
1447}
1448
1449
1450static void
1451packet_set_tos(int interactive)
1452{
1453#if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
1454	int tos = interactive ? IPTOS_LOWDELAY : IPTOS_THROUGHPUT;
1455
1456	if (!packet_connection_is_on_socket() ||
1457	    !packet_connection_is_ipv4())
1458		return;
1459	if (setsockopt(connection_in, IPPROTO_IP, IP_TOS, &tos,
1460	    sizeof(tos)) < 0)
1461		error("setsockopt IP_TOS %d: %.100s:",
1462		    tos, strerror(errno));
1463#endif
1464}
1465
1466/* Informs that the current session is interactive.  Sets IP flags for that. */
1467
1468void
1469packet_set_interactive(int interactive)
1470{
1471	static int called = 0;
1472
1473	if (called)
1474		return;
1475	called = 1;
1476
1477	/* Record that we are in interactive mode. */
1478	interactive_mode = interactive;
1479
1480	/* Only set socket options if using a socket.  */
1481	if (!packet_connection_is_on_socket())
1482		return;
1483	if (interactive)
1484		set_nodelay(connection_in);
1485	packet_set_tos(interactive);
1486}
1487
1488/* Returns true if the current connection is interactive. */
1489
1490int
1491packet_is_interactive(void)
1492{
1493	return interactive_mode;
1494}
1495
1496int
1497packet_set_maxsize(u_int s)
1498{
1499	static int called = 0;
1500
1501	if (called) {
1502		logit("packet_set_maxsize: called twice: old %d new %d",
1503		    max_packet_size, s);
1504		return -1;
1505	}
1506	if (s < 4 * 1024 || s > 1024 * 1024) {
1507		logit("packet_set_maxsize: bad size %d", s);
1508		return -1;
1509	}
1510	called = 1;
1511	debug("packet_set_maxsize: setting to %d", s);
1512	max_packet_size = s;
1513	return s;
1514}
1515
1516/* roundup current message to pad bytes */
1517void
1518packet_add_padding(u_char pad)
1519{
1520	extra_pad = pad;
1521}
1522
1523/*
1524 * 9.2.  Ignored Data Message
1525 *
1526 *   byte      SSH_MSG_IGNORE
1527 *   string    data
1528 *
1529 * All implementations MUST understand (and ignore) this message at any
1530 * time (after receiving the protocol version). No implementation is
1531 * required to send them. This message can be used as an additional
1532 * protection measure against advanced traffic analysis techniques.
1533 */
1534void
1535packet_send_ignore(int nbytes)
1536{
1537	u_int32_t rnd = 0;
1538	int i;
1539
1540	packet_start(compat20 ? SSH2_MSG_IGNORE : SSH_MSG_IGNORE);
1541	packet_put_int(nbytes);
1542	for (i = 0; i < nbytes; i++) {
1543		if (i % 4 == 0)
1544			rnd = arc4random();
1545		packet_put_char(rnd & 0xff);
1546		rnd >>= 8;
1547	}
1548}
1549
1550#define MAX_PACKETS	(1U<<31)
1551int
1552packet_need_rekeying(void)
1553{
1554	if (datafellows & SSH_BUG_NOREKEY)
1555		return 0;
1556	return
1557	    (p_send.packets > MAX_PACKETS) ||
1558	    (p_read.packets > MAX_PACKETS) ||
1559	    (max_blocks_out && (p_send.blocks > max_blocks_out)) ||
1560	    (max_blocks_in  && (p_read.blocks > max_blocks_in));
1561}
1562
1563void
1564packet_set_rekey_limit(u_int32_t bytes)
1565{
1566	rekey_limit = bytes;
1567}
1568
1569void
1570packet_set_server(void)
1571{
1572	server_side = 1;
1573}
1574
1575void
1576packet_set_authenticated(void)
1577{
1578	after_authentication = 1;
1579}
1580